| Message ID | 20240402202413.757283-1-robh@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: mfd: syscon: Add missing simple syscon compatibles | expand |
On 02/04/2024 22:24, Rob Herring wrote: > Add various "simple" syscon compatibles which were undocumented or > still documented with old text bindings. > > apm,xgene-csw, apm,xgene-efuse, apm,xgene-mcb, apm,xgene-rb, > fsl,ls1088a-reset, marvell,armada-3700-cpu-misc, > mediatek,mt2712-pctl-a-syscfg, mediatek,mt6397-pctl-pmic-syscfg, and > mediatek,mt8173-pctl-a-syscfg were all undocumented, but are in use > already. Remove the old text binding docs for the others. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Tue, 02 Apr 2024 15:24:11 -0500, Rob Herring wrote: > Add various "simple" syscon compatibles which were undocumented or > still documented with old text bindings. > > apm,xgene-csw, apm,xgene-efuse, apm,xgene-mcb, apm,xgene-rb, > fsl,ls1088a-reset, marvell,armada-3700-cpu-misc, > mediatek,mt2712-pctl-a-syscfg, mediatek,mt6397-pctl-pmic-syscfg, and > mediatek,mt8173-pctl-a-syscfg were all undocumented, but are in use > already. Remove the old text binding docs for the others. > > [...] Applied, thanks! [1/1] dt-bindings: mfd: syscon: Add missing simple syscon compatibles commit: 9f43ae67db2a3d85cf2b5eebc3b54c8891200b5c -- Lee Jones [李琼斯]
On Thu, Apr 11, 2024 at 7:50 AM Lee Jones <lee@kernel.org> wrote: > > On Tue, 02 Apr 2024 15:24:11 -0500, Rob Herring wrote: > > Add various "simple" syscon compatibles which were undocumented or > > still documented with old text bindings. > > > > apm,xgene-csw, apm,xgene-efuse, apm,xgene-mcb, apm,xgene-rb, > > fsl,ls1088a-reset, marvell,armada-3700-cpu-misc, > > mediatek,mt2712-pctl-a-syscfg, mediatek,mt6397-pctl-pmic-syscfg, and > > mediatek,mt8173-pctl-a-syscfg were all undocumented, but are in use > > already. Remove the old text binding docs for the others. > > > > [...] > > Applied, thanks! Note that something is going haywire with b4 or you applied a subset of a single patch... I really wish b4 didn't change the subjects at all since Gmail is incapable of following standard threading. > > [1/1] dt-bindings: mfd: syscon: Add missing simple syscon compatibles > commit: 9f43ae67db2a3d85cf2b5eebc3b54c8891200b5c > > -- > Lee Jones [李琼斯] >
+tools@kernel.org On Thu, 11 Apr 2024, Rob Herring wrote: > On Thu, Apr 11, 2024 at 7:50 AM Lee Jones <lee@kernel.org> wrote: > > > > On Tue, 02 Apr 2024 15:24:11 -0500, Rob Herring wrote: > > > Add various "simple" syscon compatibles which were undocumented or > > > still documented with old text bindings. > > > > > > apm,xgene-csw, apm,xgene-efuse, apm,xgene-mcb, apm,xgene-rb, > > > fsl,ls1088a-reset, marvell,armada-3700-cpu-misc, > > > mediatek,mt2712-pctl-a-syscfg, mediatek,mt6397-pctl-pmic-syscfg, and > > > mediatek,mt8173-pctl-a-syscfg were all undocumented, but are in use > > > already. Remove the old text binding docs for the others. > > > > > > [...] > > > > Applied, thanks! > > Note that something is going haywire with b4 or you applied a subset > of a single patch... I really wish b4 didn't change the subjects at > all since Gmail is incapable of following standard threading. I think "haywire" is a bit drastic. :) It's to do with the way I fetch patches from the list: b4 am -3 -slt ${PATCHES} -o - ${id} > ${MBOX} Where ${PATCHES}: if [ "${RANGE}" != "" ]; then PATCHES="-P ${RANGE}" elif [ "${SET}" == "" ]; then PATCHES="-P _" # We need this to pluck patches from sets fi `-P _` means cherry-pick, which doesn't appear to know whether we're picking up an entire set containing only a single patch or pulling out an individual patch from a larger set. There is an option to add a new Mutt key binding to do it which drops the `-P _` part in the former case, but I've ran out of free keys! Present Mutt bindings for kernel maintenance: macro index,pager M '<pipe-entry>~/bin/apply-patch.sh mfd-next<enter>' macro index,pager F '<pipe-entry>~/bin/apply-patch.sh mfd-fixes<enter>' macro index,pager B '<pipe-entry>~/bin/apply-patch.sh backlight-next<enter>' macro index,pager L '<pipe-entry>~/bin/apply-patch.sh leds-next<enter>' macro index,pager T '<pipe-entry>~/bin/apply-patch.sh toys<enter>' - These all apply single patches (single submissions or cherry-picks from sets) macro index,pager S '<pipe-entry>~/bin/apply-patch.sh set<enter>' - This presents a menu of kernel repos, then applies the whole set to ${choice} macro index,pager R '<pipe-entry>~/bin/apply-patch.sh range<enter>' - This presents a prompt to enter a given range (e.g. 1-3,6,8) - Followed by a menu of kernel repos, then applies the range to ${choice} macro index,pager A '<copy-message>=patches-to-apply<enter><enter>' - Manually applies patches from a mail folder (does not use b4)
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt deleted file mode 100644 index 77ca635765e1..000000000000 --- a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt +++ /dev/null @@ -1,12 +0,0 @@ -Altera SOCFPGA SDRAM Controller - -Required properties: -- compatible : Should contain "altr,sdr-ctl" and "syscon". - syscon is required by the Altera SOCFPGA SDRAM EDAC. -- reg : Should contain 1 register range (address and length) - -Example: - sdr: sdr@ffc25000 { - compatible = "altr,sdr-ctl", "syscon"; - reg = <0xffc25000 0x1000>; - }; diff --git a/Documentation/devicetree/bindings/arm/apm/scu.txt b/Documentation/devicetree/bindings/arm/apm/scu.txt deleted file mode 100644 index b45be06625fd..000000000000 --- a/Documentation/devicetree/bindings/arm/apm/scu.txt +++ /dev/null @@ -1,17 +0,0 @@ -APM X-GENE SoC series SCU Registers - -This system clock unit contain various register that control block resets, -clock enable/disables, clock divisors and other deepsleep registers. - -Properties: - - compatible : should contain two values. First value must be: - - "apm,xgene-scu" - second value must be always "syscon". - - - reg : offset and length of the register set. - -Example : - scu: system-clk-controller@17000000 { - compatible = "apm,xgene-scu","syscon"; - reg = <0x0 0x17000000 0x0 0x400>; - }; diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt deleted file mode 100644 index 29fa93dad52b..000000000000 --- a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt +++ /dev/null @@ -1,32 +0,0 @@ -Power management ----------------- - -For power management (particularly DVFS and AVS), the North Bridge -Power Management component is needed: - -Required properties: -- compatible : should contain "marvell,armada-3700-nb-pm", "syscon"; -- reg : the register start and length for the North Bridge - Power Management - -Example: - -nb_pm: syscon@14000 { - compatible = "marvell,armada-3700-nb-pm", "syscon"; - reg = <0x14000 0x60>; -} - -AVS ---- - -For AVS an other component is needed: - -Required properties: -- compatible : should contain "marvell,armada-3700-avs", "syscon"; -- reg : the register start and length for the AVS - -Example: -avs: avs@11500 { - compatible = "marvell,armada-3700-avs", "syscon"; - reg = <0x11500 0x40>; -} diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt deleted file mode 100644 index 82f82e069563..000000000000 --- a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt +++ /dev/null @@ -1,16 +0,0 @@ -Broadcom iProc Chip Device Resource Unit (CDRU) - -Various Broadcom iProc SoCs have a set of registers that provide various -chip specific device and resource configurations. This node allows access to -these CDRU registers via syscon. - -Required properties: -- compatible: should contain: - "brcm,sr-cdru", "syscon" for Stingray -- reg: base address and range of the CDRU registers - -Example: - cdru: syscon@6641d000 { - compatible = "brcm,sr-cdru", "syscon"; - reg = <0 0x6641d000 0 0x400>; - }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt deleted file mode 100644 index 4421e9771b8a..000000000000 --- a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt +++ /dev/null @@ -1,18 +0,0 @@ -Broadcom iProc Multi Host Bridge (MHB) - -Certain Broadcom iProc SoCs have a multi host bridge (MHB) block that controls -the connection and configuration of 1) internal PCIe serdes; 2) PCIe endpoint -interface; 3) access to the Nitro (network processing) engine - -This node allows access to these MHB registers via syscon. - -Required properties: -- compatible: should contain: - "brcm,sr-mhb", "syscon" for Stingray -- reg: base address and range of the MHB registers - -Example: - mhb: syscon@60401000 { - compatible = "brcm,sr-mhb", "syscon"; - reg = <0 0x60401000 0 0x38c>; - }; diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 9d55bee155ce..0327e779e327 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -38,11 +38,20 @@ properties: - allwinner,sun8i-h3-system-controller - allwinner,sun8i-v3s-system-controller - allwinner,sun50i-a64-system-controller + - altr,sdr-ctl - amd,pensando-elba-syscon + - apm,xgene-csw + - apm,xgene-efuse + - apm,xgene-mcb + - apm,xgene-rb + - apm,xgene-scu - brcm,cru-clkset + - brcm,sr-cdru + - brcm,sr-mhb - freecom,fsg-cs2-system-controller - fsl,imx93-aonmix-ns-syscfg - fsl,imx93-wakeupmix-syscfg + - fsl,ls1088a-reset - hisilicon,dsa-subctrl - hisilicon,hi6220-sramctrl - hisilicon,pcie-sas-subctrl @@ -51,9 +60,15 @@ properties: - intel,lgm-syscon - loongson,ls1b-syscon - loongson,ls1c-syscon + - marvell,armada-3700-cpu-misc + - marvell,armada-3700-nb-pm + - marvell,armada-3700-avs - marvell,armada-3700-usb2-host-misc + - mediatek,mt2712-pctl-a-syscfg + - mediatek,mt6397-pctl-pmic-syscfg - mediatek,mt8135-pctl-a-syscfg - mediatek,mt8135-pctl-b-syscfg + - mediatek,mt8173-pctl-a-syscfg - mediatek,mt8365-syscfg - microchip,lan966x-cpu-syscon - microchip,sparx5-cpu-syscon
Add various "simple" syscon compatibles which were undocumented or still documented with old text bindings. apm,xgene-csw, apm,xgene-efuse, apm,xgene-mcb, apm,xgene-rb, fsl,ls1088a-reset, marvell,armada-3700-cpu-misc, mediatek,mt2712-pctl-a-syscfg, mediatek,mt6397-pctl-pmic-syscfg, and mediatek,mt8173-pctl-a-syscfg were all undocumented, but are in use already. Remove the old text binding docs for the others. Signed-off-by: Rob Herring <robh@kernel.org> --- .../arm/altera/socfpga-sdram-controller.txt | 12 ------- .../devicetree/bindings/arm/apm/scu.txt | 17 ---------- .../bindings/arm/marvell/armada-37xx.txt | 32 ------------------- .../bindings/mfd/brcm,iproc-cdru.txt | 16 ---------- .../bindings/mfd/brcm,iproc-mhb.txt | 18 ----------- .../devicetree/bindings/mfd/syscon.yaml | 15 +++++++++ 6 files changed, 15 insertions(+), 95 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt delete mode 100644 Documentation/devicetree/bindings/arm/apm/scu.txt delete mode 100644 Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt delete mode 100644 Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt delete mode 100644 Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt