| Message ID | 20240410-mbly-olb-v1-8-335e496d7be3@bootlin.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add Mobileye EyeQ system controller support (clk, reset, pinctrl) | expand |
On 10/04/2024 19:12, Théo Lebrun wrote: > The OLB ("Other Logic Block") is a syscon region hosting clock, reset > and pin controllers. It contains registers such as I2C speed mode that > need to be accessible by other nodes. > > Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> > --- > arch/mips/boot/dts/mobileye/eyeq5.dtsi | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi > index 6cc5980e2fa1..e82d2a57f6da 100644 > --- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi > +++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi > @@ -100,6 +100,14 @@ uart2: serial@a00000 { > clock-names = "uartclk", "apb_pclk"; > }; > > + olb: system-controller@e00000 { > + compatible = "mobileye,eyeq5-olb", "syscon", "simple-mfd"; > + reg = <0 0xe00000 0x0 0x400>; > + ranges = <0x0 0x0 0xe00000 0x400>; > + #address-cells = <1>; > + #size-cells = <1>; Do not add incomplete node. ranges, address/size-cells are incorrect in this context and you will have warnings. Add complete node, so these properties make sense. Best regards, Krzysztof
Hello, On Thu Apr 11, 2024 at 8:15 AM CEST, Krzysztof Kozlowski wrote: > On 10/04/2024 19:12, Théo Lebrun wrote: > > The OLB ("Other Logic Block") is a syscon region hosting clock, reset > > and pin controllers. It contains registers such as I2C speed mode that > > need to be accessible by other nodes. > > > > Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> > > --- > > arch/mips/boot/dts/mobileye/eyeq5.dtsi | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi > > index 6cc5980e2fa1..e82d2a57f6da 100644 > > --- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi > > +++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi > > @@ -100,6 +100,14 @@ uart2: serial@a00000 { > > clock-names = "uartclk", "apb_pclk"; > > }; > > > > + olb: system-controller@e00000 { > > + compatible = "mobileye,eyeq5-olb", "syscon", "simple-mfd"; > > + reg = <0 0xe00000 0x0 0x400>; > > + ranges = <0x0 0x0 0xe00000 0x400>; > > + #address-cells = <1>; > > + #size-cells = <1>; > > Do not add incomplete node. ranges, address/size-cells are incorrect in > this context and you will have warnings. > > Add complete node, so these properties make sense. I'll squash all four commits into one. For reference, commits are: - MIPS: mobileye: eyeq5: add OLB syscon node - MIPS: mobileye: eyeq5: use OLB clocks controller node - MIPS: mobileye: eyeq5: add OLB reset controller node - MIPS: mobileye: eyeq5: add pinctrl node & pinmux function nodes This means two things: (1) it won't be partially applicable and (2) it will make one big commit adding pins and editing clocks. Thanks, -- Théo Lebrun, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
On 11/04/2024 16:34, Théo Lebrun wrote: > Hello, > > On Thu Apr 11, 2024 at 8:15 AM CEST, Krzysztof Kozlowski wrote: >> On 10/04/2024 19:12, Théo Lebrun wrote: >>> The OLB ("Other Logic Block") is a syscon region hosting clock, reset >>> and pin controllers. It contains registers such as I2C speed mode that >>> need to be accessible by other nodes. >>> >>> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> >>> --- >>> arch/mips/boot/dts/mobileye/eyeq5.dtsi | 8 ++++++++ >>> 1 file changed, 8 insertions(+) >>> >>> diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi >>> index 6cc5980e2fa1..e82d2a57f6da 100644 >>> --- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi >>> +++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi >>> @@ -100,6 +100,14 @@ uart2: serial@a00000 { >>> clock-names = "uartclk", "apb_pclk"; >>> }; >>> >>> + olb: system-controller@e00000 { >>> + compatible = "mobileye,eyeq5-olb", "syscon", "simple-mfd"; >>> + reg = <0 0xe00000 0x0 0x400>; >>> + ranges = <0x0 0x0 0xe00000 0x400>; >>> + #address-cells = <1>; >>> + #size-cells = <1>; >> >> Do not add incomplete node. ranges, address/size-cells are incorrect in >> this context and you will have warnings. >> >> Add complete node, so these properties make sense. > > I'll squash all four commits into one. For reference, commits are: > > - MIPS: mobileye: eyeq5: add OLB syscon node > - MIPS: mobileye: eyeq5: use OLB clocks controller node > - MIPS: mobileye: eyeq5: add OLB reset controller node > - MIPS: mobileye: eyeq5: add pinctrl node & pinmux function nodes > > This means two things: (1) it won't be partially applicable and (2) it Why? > will make one big commit adding pins and editing clocks. It never was partially applicable. Causing warnings does not make things partially applicable. If node is too big, although I personally do not agree, it's quite moderate size chunk, then sure, split pinctrl groups or pinctrl node to additional patch. Best regards, Krzysztof
Hello, On Thu Apr 11, 2024 at 5:07 PM CEST, Krzysztof Kozlowski wrote: > On 11/04/2024 16:34, Théo Lebrun wrote: > > Hello, > > > > On Thu Apr 11, 2024 at 8:15 AM CEST, Krzysztof Kozlowski wrote: > >> On 10/04/2024 19:12, Théo Lebrun wrote: > >>> The OLB ("Other Logic Block") is a syscon region hosting clock, reset > >>> and pin controllers. It contains registers such as I2C speed mode that > >>> need to be accessible by other nodes. > >>> > >>> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> > >>> --- > >>> arch/mips/boot/dts/mobileye/eyeq5.dtsi | 8 ++++++++ > >>> 1 file changed, 8 insertions(+) > >>> > >>> diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi > >>> index 6cc5980e2fa1..e82d2a57f6da 100644 > >>> --- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi > >>> +++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi > >>> @@ -100,6 +100,14 @@ uart2: serial@a00000 { > >>> clock-names = "uartclk", "apb_pclk"; > >>> }; > >>> > >>> + olb: system-controller@e00000 { > >>> + compatible = "mobileye,eyeq5-olb", "syscon", "simple-mfd"; > >>> + reg = <0 0xe00000 0x0 0x400>; > >>> + ranges = <0x0 0x0 0xe00000 0x400>; > >>> + #address-cells = <1>; > >>> + #size-cells = <1>; > >> > >> Do not add incomplete node. ranges, address/size-cells are incorrect in > >> this context and you will have warnings. > >> > >> Add complete node, so these properties make sense. > > > > I'll squash all four commits into one. For reference, commits are: > > > > - MIPS: mobileye: eyeq5: add OLB syscon node > > - MIPS: mobileye: eyeq5: use OLB clocks controller node > > - MIPS: mobileye: eyeq5: add OLB reset controller node > > - MIPS: mobileye: eyeq5: add pinctrl node & pinmux function nodes > > > > This means two things: (1) it won't be partially applicable and (2) it > > Why? > > > will make one big commit adding pins and editing clocks. > > It never was partially applicable. Causing warnings does not make things > partially applicable. If node is too big, although I personally do not > agree, it's quite moderate size chunk, then sure, split pinctrl groups > or pinctrl node to additional patch. Thanks for feedback; it'll become a single patch as it is fine with you. Regards, -- Théo Lebrun, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi index 6cc5980e2fa1..e82d2a57f6da 100644 --- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi +++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi @@ -100,6 +100,14 @@ uart2: serial@a00000 { clock-names = "uartclk", "apb_pclk"; }; + olb: system-controller@e00000 { + compatible = "mobileye,eyeq5-olb", "syscon", "simple-mfd"; + reg = <0 0xe00000 0x0 0x400>; + ranges = <0x0 0x0 0xe00000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + }; + gic: interrupt-controller@140000 { compatible = "mti,gic"; reg = <0x0 0x140000 0x0 0x20000>;
The OLB ("Other Logic Block") is a syscon region hosting clock, reset and pin controllers. It contains registers such as I2C speed mode that need to be accessible by other nodes. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> --- arch/mips/boot/dts/mobileye/eyeq5.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)