| Message ID | 20240408225109.128953-1-sebastian.reichel@collabora.com |
|---|---|
| Headers | show |
| Series | RK3588 USBDP support | expand |
On Tue, 09 Apr 2024 00:50:27 +0200, Sebastian Reichel wrote: > This adds Rockchip RK3588 USBDP PHY support, which is used for two of the three > USB3 controllers in the RK3588 (the third one uses a different PHY, which is > already supported). The USBDP PHY offers USB3 dual-role and DisplayPort. The > driver and bindings being upstreamed contains the DP parts, but only USB3 has > been tested by me (upstream does not yet have a DRM DP bridge driver for this > platform). > > [...] Applied, thanks! [01/10] dt-bindings: phy: add rockchip usbdp combo phy document commit: a75d8056e9fefa82ca2bd75a32febc44411cc5c0 [02/10] phy: rockchip: add usbdp combo phy driver commit: 2f70bbddeb457580cef3ceb574506083b9272188 Best regards,
On Tue, 9 Apr 2024 00:50:27 +0200, Sebastian Reichel wrote: > This adds Rockchip RK3588 USBDP PHY support, which is used for two of the three > USB3 controllers in the RK3588 (the third one uses a different PHY, which is > already supported). The USBDP PHY offers USB3 dual-role and DisplayPort. The > driver and bindings being upstreamed contains the DP parts, but only USB3 has > been tested by me (upstream does not yet have a DRM DP bridge driver for this > platform). > > [...] Applied, thanks! [03/10] arm64: defconfig: enable Rockchip Samsung USBDP PHY commit: 7cdf7efefc02189cf9a228d4c5c4253d273e9b1a [04/10] arm64: dts: rockchip: fix usb2phy nodename for rk3588 commit: 4e07a95f7402de092cd71b2cb96c69f85c98f251 [05/10] arm64: dts: rockchip: reorder usb2phy properties for rk3588 commit: abe68e0ca71dddce0e5419e35507cb464d61870d [06/10] arm64: dts: rockchip: add USBDP phys on rk3588 commit: e18e5e8188f2671abf63abe7db5f21555705130f [07/10] arm64: dts: rockchip: add USB3 DRD controllers on rk3588 commit: 33f393a2a990e16f56931ca708295f31d2b44415 [08/10] arm64: dts: rockchip: add USB3 to rk3588-evb1 commit: b37146b5a555dd871cb0805446826ab2fc8d285a [09/10] arm64: dts: rockchip: add upper USB3 port to rock-5a commit: af7ec140ddc1815bc462109792d95bcad05cfbc4 [10/10] arm64: dts: rockchip: add lower USB3 port to rock-5b commit: 494532921aacb496529d544fedfdb3a7b43dfef0 I've rearranged some things in the evb1 patch: - vbus* before vcc* - some newlines between properties and subnodes around the endpoints Best regards,
Hello Heiko, On Fri, Apr 12, 2024 at 04:46:43PM +0200, Heiko Stuebner wrote: > On Tue, 9 Apr 2024 00:50:27 +0200, Sebastian Reichel wrote: > > This adds Rockchip RK3588 USBDP PHY support, which is used for two of the three > > USB3 controllers in the RK3588 (the third one uses a different PHY, which is > > already supported). The USBDP PHY offers USB3 dual-role and DisplayPort. The > > driver and bindings being upstreamed contains the DP parts, but only USB3 has > > been tested by me (upstream does not yet have a DRM DP bridge driver for this > > platform). > > > > [...] > > Applied, thanks! > > [...] > > I've rearranged some things in the evb1 patch: > - vbus* before vcc* > - some newlines between properties and subnodes around > the endpoints Thanks, sorry for the extra work. -- Sebastian
Hi, This adds Rockchip RK3588 USBDP PHY support, which is used for two of the three USB3 controllers in the RK3588 (the third one uses a different PHY, which is already supported). The USBDP PHY offers USB3 dual-role and DisplayPort. The driver and bindings being upstreamed contains the DP parts, but only USB3 has been tested by me (upstream does not yet have a DRM DP bridge driver for this platform). What has been tested: - USB3 Type A ports on Rock 5A, Rock 5B, EVB1 - USB Type C port on EVB1 in Host mode I did not yet include a patch to enable the Type-C from the Rock 5B, since that requires enabling proper support for the fusb302. Since the system is usually supplied via USB-C and without any battery backup, this easily results in system reset when the power-delivery negotiation happens. As this issue is independent from the USBDP PHY, I skipped enabling that port on Rock 5B for now. You can find a branch with these patches here: https://gitlab.collabora.com/hardware-enablement/rockchip-3588/linux/-/commits/rk3588-usbdp Changes since PATCHv4: * https://lore.kernel.org/all/20240325141653.84910-1-sebastian.reichel@collabora.com/ * update copyright * drop linux/clk-provider.h include * replace of.h with mod_devicetable.h * re-check necessity of other included headers * rk_udphy_setup, rk_udphy_usb3_phy_init: remove redundant init of ret variable * rk_udphy_parse_dt: directly return rk_udphy_reset_init() Changes since PATCHv3: * https://lore.kernel.org/all/20240216170514.75200-1-sebastian.reichel@collabora.com/ * Rebase to v6.9-rc1 * Collect Reviewed-by and Tested-by from Heiko for patch 1 + 2 Changes since PATCHv2: * https://lore.kernel.org/all/20240213163609.44930-1-sebastian.reichel@collabora.com/ * Drop patch 1+2 (GRF DT bindings got merged by Heiko Stübner) * USBDP PHY DT binding: more spelling fixes * USBDP PHY DT binding: add Reviewed-by from Conor Dooley * USBDP PHY DT binding: specify 3 as maximum value for rockchip,dp-lane-mux items * all patches: remove child nodes for usb3-port and dp-port and use PHY cell instead * USBDP PHY driver: drop some header includes * USBDP PHY driver: rework rk_udphy_grfreg_write to use FIELD_PREP_CONST * USBDP PHY driver: add newline after break; in switch cases * USBDP PHY driver: make some functions void Changes since PATCHv1: * https://lore.kernel.org/all/20240209181831.104687-1-sebastian.reichel@collabora.com/ * VO GRF DT binding: Collect Acked-by from Conor Dooley * USB3 syscon DT binding: Collect Acked-by from Conor Dooley * USBDP PHY DT binding: fix spelling * USBDP PHY DT binding: add maxItems: 1 to gpios * USBDP PHY driver: use rk_udphy_ prefix everywhere * USBDP PHY DT addition: fix nodenames and property order * USBDP PHY DT addition: fix position of the GRF nodes * add new patches fixing existing USB2 PHY nodenames/property order Not changed: * rockchip,dp-lane-mux: Why "mux" and not "map"? - This is about muxing DP lanes vs USB3 lanes. I kept mux instead of map, since that's used downstream and there does not seem to be a good reason to diverge? -- Sebastian Sebastian Reichel (10): dt-bindings: phy: add rockchip usbdp combo phy document phy: rockchip: add usbdp combo phy driver arm64: defconfig: enable Rockchip Samsung USBDP PHY arm64: dts: rockchip: fix usb2phy nodename for rk3588 arm64: dts: rockchip: reorder usb2phy properties for rk3588 arm64: dts: rockchip: add USBDP phys on rk3588 arm64: dts: rockchip: add USB3 DRD controllers on rk3588 arm64: dts: rockchip: add USB3 to rk3588-evb1 arm64: dts: rockchip: add upper USB3 port to rock-5a arm64: dts: rockchip: add lower USB3 port to rock-5b .../bindings/phy/phy-rockchip-usbdp.yaml | 148 ++ .../boot/dts/rockchip/rk3588-evb1-v10.dts | 143 ++ .../boot/dts/rockchip/rk3588-rock-5b.dts | 17 + arch/arm64/boot/dts/rockchip/rk3588.dtsi | 72 + .../boot/dts/rockchip/rk3588s-rock-5a.dts | 18 + arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 105 +- arch/arm64/configs/defconfig | 1 + drivers/phy/rockchip/Kconfig | 12 + drivers/phy/rockchip/Makefile | 1 + drivers/phy/rockchip/phy-rockchip-usbdp.c | 1608 +++++++++++++++++ 10 files changed, 2115 insertions(+), 10 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml create mode 100644 drivers/phy/rockchip/phy-rockchip-usbdp.c