diff mbox series

arm64: dts: mediatek: mt8183-kukui: Drop bogus output-enable property

Message ID 20240412075613.1200048-1-wenst@chromium.org (mailing list archive)
State New, archived
Headers show
Series arm64: dts: mediatek: mt8183-kukui: Drop bogus output-enable property | expand

Commit Message

Chen-Yu Tsai April 12, 2024, 7:56 a.m. UTC
The "output-enable" property is set on uart1's RTS pin. This is bogus
because the hardware does not actually have a controllable output
buffer. Secondly, the implementation incorrectly treats this property
as a request to switch the pin to GPIO output. This does not fit the
intended semantic of "output-enable" and it does not have any affect
either because the pin is muxed to the UART function, not the GPIO
function.

Drop the property.

Fixes: cd894e274b74 ("arm64: dts: mt8183: Add krane-sku176 board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
 arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 2 --
 1 file changed, 2 deletions(-)

Comments

AngeloGioacchino Del Regno April 15, 2024, 10:33 a.m. UTC | #1
Il 12/04/24 09:56, Chen-Yu Tsai ha scritto:
> The "output-enable" property is set on uart1's RTS pin. This is bogus
> because the hardware does not actually have a controllable output
> buffer. Secondly, the implementation incorrectly treats this property
> as a request to switch the pin to GPIO output. This does not fit the
> intended semantic of "output-enable" and it does not have any affect
> either because the pin is muxed to the UART function, not the GPIO
> function.
> 
> Drop the property.
> 
> Fixes: cd894e274b74 ("arm64: dts: mt8183: Add krane-sku176 board")
> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index f934b8aad3ed..75c799a6adb4 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -797,7 +797,6 @@  pins-tx {
 		};
 		pins-rts {
 			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
-			output-enable;
 		};
 		pins-cts {
 			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
@@ -816,7 +815,6 @@  pins-tx {
 		};
 		pins-rts {
 			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
-			output-enable;
 		};
 		pins-cts {
 			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;