| Message ID | 20240404122559.898930-6-peter.griffin@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | HSI2, UFS & UFS phy support for Tensor GS101 | expand |
On Thu, 2024-04-04 at 13:25 +0100, Peter Griffin wrote: > Enable the cmu_hsi2 clock management unit. It feeds some of > the high speed interfaces such as PCIe and UFS. > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > --- > arch/arm64/boot/dts/exynos/google/gs101.dtsi | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi > index eddb6b326fde..38ac4fb1397e 100644 > --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi > +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi > @@ -1253,6 +1253,18 @@ pinctrl_hsi1: pinctrl@11840000 { > interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>; > }; > > + cmu_hsi2: clock-controller@14400000 { > + compatible = "google,gs101-cmu-hsi2"; > + reg = <0x14400000 0x4000>; > + #clock-cells = <1>; > + clocks = <&ext_24_5m>, > + <&cmu_top CLK_DOUT_CMU_HSI2_BUS>, > + <&cmu_top CLK_DOUT_CMU_HSI2_PCIE>, > + <&cmu_top CLK_DOUT_CMU_HSI2_UFS_EMBD>, > + <&cmu_top CLK_DOUT_CMU_HSI2_MMC_CARD>; > + clock-names = "oscclk", "bus", "pcie", "ufs_embd", "mmc_card"; > + }; This doesn't build because you didn't add the clock ids in the binding patch. Other than that, Reviewed-by: André Draszik <andre.draszik@linaro.org> > + > pinctrl_hsi2: pinctrl@14440000 { > compatible = "google,gs101-pinctrl"; > reg = <0x14440000 0x00001000>;
On 04/04/2024 14:25, Peter Griffin wrote: > Enable the cmu_hsi2 clock management unit. It feeds some of > the high speed interfaces such as PCIe and UFS. > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > --- > arch/arm64/boot/dts/exynos/google/gs101.dtsi | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > Was it really compiled? Best regards, Krzysztof
Hi André, Thanks for the review. On Fri, 5 Apr 2024 at 08:38, André Draszik <andre.draszik@linaro.org> wrote: > > On Thu, 2024-04-04 at 13:25 +0100, Peter Griffin wrote: > > Enable the cmu_hsi2 clock management unit. It feeds some of > > the high speed interfaces such as PCIe and UFS. > > > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > > --- > > arch/arm64/boot/dts/exynos/google/gs101.dtsi | 12 ++++++++++++ > > 1 file changed, 12 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi > > index eddb6b326fde..38ac4fb1397e 100644 > > --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi > > +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi > > @@ -1253,6 +1253,18 @@ pinctrl_hsi1: pinctrl@11840000 { > > interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>; > > }; > > > > + cmu_hsi2: clock-controller@14400000 { > > + compatible = "google,gs101-cmu-hsi2"; > > + reg = <0x14400000 0x4000>; > > + #clock-cells = <1>; > > + clocks = <&ext_24_5m>, > > + <&cmu_top CLK_DOUT_CMU_HSI2_BUS>, > > + <&cmu_top CLK_DOUT_CMU_HSI2_PCIE>, > > + <&cmu_top CLK_DOUT_CMU_HSI2_UFS_EMBD>, > > + <&cmu_top CLK_DOUT_CMU_HSI2_MMC_CARD>; > > + clock-names = "oscclk", "bus", "pcie", "ufs_embd", "mmc_card"; > > + }; > > This doesn't build because you didn't add the clock ids in the binding patch. These clock IDs are for cmu_top, not cmu_hsi2. They were added as part of the initial gs101/Oriole upstream support series in the following commit commit 0a910f1606384a5886a045e36b1fc80a7fa6706b Author: Peter Griffin <peter.griffin@linaro.org> Date: Sat Dec 9 23:30:48 2023 +0000 dt-bindings: clock: Add Google gs101 clock management unit bindings Provide dt-schema documentation for Google gs101 SoC clock controller. Currently this adds support for cmu_top, cmu_misc and cmu_apm. Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231209233106.147416-3-peter.griffin@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> regards, Peter
Hi Pete, On Tue, 2024-04-16 at 12:56 +0100, Peter Griffin wrote: > Hi André, > > Thanks for the review. > > On Fri, 5 Apr 2024 at 08:38, André Draszik <andre.draszik@linaro.org> wrote: > > > > On Thu, 2024-04-04 at 13:25 +0100, Peter Griffin wrote: > > > Enable the cmu_hsi2 clock management unit. It feeds some of > > > the high speed interfaces such as PCIe and UFS. > > > > > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > > > --- > > > arch/arm64/boot/dts/exynos/google/gs101.dtsi | 12 ++++++++++++ > > > 1 file changed, 12 insertions(+) > > > > > > diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi > > > index eddb6b326fde..38ac4fb1397e 100644 > > > --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi > > > +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi > > > @@ -1253,6 +1253,18 @@ pinctrl_hsi1: pinctrl@11840000 { > > > interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>; > > > }; > > > > > > + cmu_hsi2: clock-controller@14400000 { > > > + compatible = "google,gs101-cmu-hsi2"; > > > + reg = <0x14400000 0x4000>; > > > + #clock-cells = <1>; > > > + clocks = <&ext_24_5m>, > > > + <&cmu_top CLK_DOUT_CMU_HSI2_BUS>, > > > + <&cmu_top CLK_DOUT_CMU_HSI2_PCIE>, > > > + <&cmu_top CLK_DOUT_CMU_HSI2_UFS_EMBD>, > > > + <&cmu_top CLK_DOUT_CMU_HSI2_MMC_CARD>; > > > + clock-names = "oscclk", "bus", "pcie", "ufs_embd", "mmc_card"; > > > + }; > > > > This doesn't build because you didn't add the clock ids in the binding patch. > > These clock IDs are for cmu_top, not cmu_hsi2. Right. I replied to the wrong patch. Sorry for that. It is patch 7 that uses clock ids that are only added in patch 8. The clock ids from patch 8 in include/dt-bindings/clock/google,gs101.h should be added in patch 1 instead. Cheers, Andre'
Hi André, On Tue, 16 Apr 2024 at 13:21, André Draszik <andre.draszik@linaro.org> wrote: > > Hi Pete, > > On Tue, 2024-04-16 at 12:56 +0100, Peter Griffin wrote: > > Hi André, > > > > Thanks for the review. > > > > On Fri, 5 Apr 2024 at 08:38, André Draszik <andre.draszik@linaro.org> wrote: > > > > > > On Thu, 2024-04-04 at 13:25 +0100, Peter Griffin wrote: > > > > Enable the cmu_hsi2 clock management unit. It feeds some of > > > > the high speed interfaces such as PCIe and UFS. > > > > > > > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > > > > --- > > > > arch/arm64/boot/dts/exynos/google/gs101.dtsi | 12 ++++++++++++ > > > > 1 file changed, 12 insertions(+) > > > > > > > > diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi > > > > index eddb6b326fde..38ac4fb1397e 100644 > > > > --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi > > > > +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi > > > > @@ -1253,6 +1253,18 @@ pinctrl_hsi1: pinctrl@11840000 { > > > > interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>; > > > > }; > > > > > > > > + cmu_hsi2: clock-controller@14400000 { > > > > + compatible = "google,gs101-cmu-hsi2"; > > > > + reg = <0x14400000 0x4000>; > > > > + #clock-cells = <1>; > > > > + clocks = <&ext_24_5m>, > > > > + <&cmu_top CLK_DOUT_CMU_HSI2_BUS>, > > > > + <&cmu_top CLK_DOUT_CMU_HSI2_PCIE>, > > > > + <&cmu_top CLK_DOUT_CMU_HSI2_UFS_EMBD>, > > > > + <&cmu_top CLK_DOUT_CMU_HSI2_MMC_CARD>; > > > > + clock-names = "oscclk", "bus", "pcie", "ufs_embd", "mmc_card"; > > > > + }; > > > > > > This doesn't build because you didn't add the clock ids in the binding patch. > > > > These clock IDs are for cmu_top, not cmu_hsi2. > > Right. I replied to the wrong patch. Sorry for that. It is patch 7 that > uses clock ids that are only added in patch 8. The clock ids from patch 8 > in include/dt-bindings/clock/google,gs101.h should be added in patch 1 > instead. Ah I see, thanks for the clarification. I'll fix that in v2. Thanks, Pete
diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi index eddb6b326fde..38ac4fb1397e 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi @@ -1253,6 +1253,18 @@ pinctrl_hsi1: pinctrl@11840000 { interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>; }; + cmu_hsi2: clock-controller@14400000 { + compatible = "google,gs101-cmu-hsi2"; + reg = <0x14400000 0x4000>; + #clock-cells = <1>; + clocks = <&ext_24_5m>, + <&cmu_top CLK_DOUT_CMU_HSI2_BUS>, + <&cmu_top CLK_DOUT_CMU_HSI2_PCIE>, + <&cmu_top CLK_DOUT_CMU_HSI2_UFS_EMBD>, + <&cmu_top CLK_DOUT_CMU_HSI2_MMC_CARD>; + clock-names = "oscclk", "bus", "pcie", "ufs_embd", "mmc_card"; + }; + pinctrl_hsi2: pinctrl@14440000 { compatible = "google,gs101-pinctrl"; reg = <0x14440000 0x00001000>;
Enable the cmu_hsi2 clock management unit. It feeds some of the high speed interfaces such as PCIe and UFS. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> --- arch/arm64/boot/dts/exynos/google/gs101.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)