| Message ID | 20240416070127.116922-3-Jiqian.Chen@amd.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | S3 support | expand |
On Tue, 16 Apr 2024 15:01:27 +0800 Jiqian Chen <Jiqian.Chen@amd.com> wrote: > In current code, when guest does S3, virtio-gpu are reset due to the > bit No_Soft_Reset is not set. After resetting, the display resources > of virtio-gpu are destroyed, then the display can't come back and only > show blank after resuming. Just a high level question. Typically when system goes into S3 all devices (modulo RAM) loose context (aka powered off), and then it's upto device driver to recover whatever was lost. So why should we implement hw(qemu) workaround for a driver problem? > > Implement No_Soft_Reset bit of PCI_PM_CTRL register, then guest can check > this bit, if this bit is set, the devices resetting will not be done, and > then the display can work after resuming. > > No_Soft_Reset bit is implemented for all virtio devices, and was tested > only on virtio-gpu device. Set it false by default for safety. > > Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com> > --- > hw/virtio/virtio-pci.c | 37 ++++++++++++++++++++++++++++++++++ > include/hw/virtio/virtio-pci.h | 5 +++++ > 2 files changed, 42 insertions(+) > > diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c > index a1b61308e7a0..82fa4defe5cd 100644 > --- a/hw/virtio/virtio-pci.c > +++ b/hw/virtio/virtio-pci.c > @@ -2230,6 +2230,11 @@ static void virtio_pci_realize(PCIDevice *pci_dev, Error **errp) > pcie_cap_lnkctl_init(pci_dev); > } > > + if (proxy->flags & VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET) { > + pci_set_word(pci_dev->config + pos + PCI_PM_CTRL, > + PCI_PM_CTRL_NO_SOFT_RESET); > + } > + > if (proxy->flags & VIRTIO_PCI_FLAG_INIT_PM) { > /* Init Power Management Control Register */ > pci_set_word(pci_dev->wmask + pos + PCI_PM_CTRL, > @@ -2292,11 +2297,37 @@ static void virtio_pci_reset(DeviceState *qdev) > } > } > > +static bool virtio_pci_no_soft_reset(PCIDevice *dev) > +{ > + uint16_t pmcsr; > + > + if (!pci_is_express(dev) || !dev->exp.pm_cap) { > + return false; > + } > + > + pmcsr = pci_get_word(dev->config + dev->exp.pm_cap + PCI_PM_CTRL); > + > + /* > + * When No_Soft_Reset bit is set and the device > + * is in D3hot state, don't reset device > + */ > + return (pmcsr & PCI_PM_CTRL_NO_SOFT_RESET) && > + (pmcsr & PCI_PM_CTRL_STATE_MASK) == 3; > +} > + > static void virtio_pci_bus_reset_hold(Object *obj) > { > PCIDevice *dev = PCI_DEVICE(obj); > DeviceState *qdev = DEVICE(obj); > > + /* > + * Note that: a proposal to add SUSPEND bit is being discussed, > + * may need to consider the state of SUSPEND bit in future > + */ > + if (virtio_pci_no_soft_reset(dev)) { > + return; > + } > + > virtio_pci_reset(qdev); > > if (pci_is_express(dev)) { > @@ -2336,6 +2367,12 @@ static Property virtio_pci_properties[] = { > VIRTIO_PCI_FLAG_INIT_LNKCTL_BIT, true), > DEFINE_PROP_BIT("x-pcie-pm-init", VirtIOPCIProxy, flags, > VIRTIO_PCI_FLAG_INIT_PM_BIT, true), > + /* > + * for safety, set this false by default, if change it to true, > + * need to consider compatible for old machine > + */ > + DEFINE_PROP_BIT("pcie-pm-no-soft-reset", VirtIOPCIProxy, flags, > + VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET_BIT, false), > DEFINE_PROP_BIT("x-pcie-flr-init", VirtIOPCIProxy, flags, > VIRTIO_PCI_FLAG_INIT_FLR_BIT, true), > DEFINE_PROP_BIT("aer", VirtIOPCIProxy, flags, > diff --git a/include/hw/virtio/virtio-pci.h b/include/hw/virtio/virtio-pci.h > index 59d88018c16a..9e67ba38c748 100644 > --- a/include/hw/virtio/virtio-pci.h > +++ b/include/hw/virtio/virtio-pci.h > @@ -43,6 +43,7 @@ enum { > VIRTIO_PCI_FLAG_INIT_FLR_BIT, > VIRTIO_PCI_FLAG_AER_BIT, > VIRTIO_PCI_FLAG_ATS_PAGE_ALIGNED_BIT, > + VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET_BIT, > }; > > /* Need to activate work-arounds for buggy guests at vmstate load. */ > @@ -79,6 +80,10 @@ enum { > /* Init Power Management */ > #define VIRTIO_PCI_FLAG_INIT_PM (1 << VIRTIO_PCI_FLAG_INIT_PM_BIT) > > +/* Init The No_Soft_Reset bit of Power Management */ > +#define VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET \ > + (1 << VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET_BIT) > + > /* Init Function Level Reset capability */ > #define VIRTIO_PCI_FLAG_INIT_FLR (1 << VIRTIO_PCI_FLAG_INIT_FLR_BIT) >
On 2024/4/16 23:45, Igor Mammedov wrote: > On Tue, 16 Apr 2024 15:01:27 +0800 > Jiqian Chen <Jiqian.Chen@amd.com> wrote: > >> In current code, when guest does S3, virtio-gpu are reset due to the >> bit No_Soft_Reset is not set. After resetting, the display resources >> of virtio-gpu are destroyed, then the display can't come back and only >> show blank after resuming. > > Just a high level question. > Typically when system goes into S3 all devices (modulo RAM) loose context > (aka powered off), and then it's upto device driver to recover whatever > was lost. No, what you said is just one situation that when system goes into S3 devices loose context and fully reinitialized and be D0-uninitialized state. The other situation is the context must be maintained so that the devices can quickly be D0-active state after resuming. There are some descriptions in PCIe specification in Chapter 5.3.1.4 D3 state: " Functional context is required to be maintained by Functions in the D3Hot state if the No_Soft_Reset field in the PMCSR is Set. In this case, System Software is not required to re-initialize the Function after a transition from D3Hot to D0 (the Function will be in the D0active state). If the No_Soft_Reset bit is Clear, functional context is not required to be maintained by the Function in the D3Hot state, however it is not guaranteed that functional context will be cleared and software must not depend on such behavior. As a result, in this case System Software is required to fully re-initialize the Function after a transition to D0 as the Function will be in the D0uninitialized state." What's more, not all virtio devices' context can be recovered by driver after resuming, like virtio-gpu, we have not enough information to re-create all display resources, that is discussed in my previous version email thread. > So why should we implement hw(qemu) workaround for a driver problem? I think this is not a workaround, No_Soft_Reset bit is also described in PCIe specification, it can be set or not. And we can set this bit for the specific device which we want to maintain context during S3. > >> >> Implement No_Soft_Reset bit of PCI_PM_CTRL register, then guest can check >> this bit, if this bit is set, the devices resetting will not be done, and >> then the display can work after resuming. >> >> No_Soft_Reset bit is implemented for all virtio devices, and was tested >> only on virtio-gpu device. Set it false by default for safety. >> >> Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com> >> --- >> hw/virtio/virtio-pci.c | 37 ++++++++++++++++++++++++++++++++++ >> include/hw/virtio/virtio-pci.h | 5 +++++ >> 2 files changed, 42 insertions(+) >> >> diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c >> index a1b61308e7a0..82fa4defe5cd 100644 >> --- a/hw/virtio/virtio-pci.c >> +++ b/hw/virtio/virtio-pci.c >> @@ -2230,6 +2230,11 @@ static void virtio_pci_realize(PCIDevice *pci_dev, Error **errp) >> pcie_cap_lnkctl_init(pci_dev); >> } >> >> + if (proxy->flags & VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET) { >> + pci_set_word(pci_dev->config + pos + PCI_PM_CTRL, >> + PCI_PM_CTRL_NO_SOFT_RESET); >> + } >> + >> if (proxy->flags & VIRTIO_PCI_FLAG_INIT_PM) { >> /* Init Power Management Control Register */ >> pci_set_word(pci_dev->wmask + pos + PCI_PM_CTRL, >> @@ -2292,11 +2297,37 @@ static void virtio_pci_reset(DeviceState *qdev) >> } >> } >> >> +static bool virtio_pci_no_soft_reset(PCIDevice *dev) >> +{ >> + uint16_t pmcsr; >> + >> + if (!pci_is_express(dev) || !dev->exp.pm_cap) { >> + return false; >> + } >> + >> + pmcsr = pci_get_word(dev->config + dev->exp.pm_cap + PCI_PM_CTRL); >> + >> + /* >> + * When No_Soft_Reset bit is set and the device >> + * is in D3hot state, don't reset device >> + */ >> + return (pmcsr & PCI_PM_CTRL_NO_SOFT_RESET) && >> + (pmcsr & PCI_PM_CTRL_STATE_MASK) == 3; >> +} >> + >> static void virtio_pci_bus_reset_hold(Object *obj) >> { >> PCIDevice *dev = PCI_DEVICE(obj); >> DeviceState *qdev = DEVICE(obj); >> >> + /* >> + * Note that: a proposal to add SUSPEND bit is being discussed, >> + * may need to consider the state of SUSPEND bit in future >> + */ >> + if (virtio_pci_no_soft_reset(dev)) { >> + return; >> + } >> + >> virtio_pci_reset(qdev); >> >> if (pci_is_express(dev)) { >> @@ -2336,6 +2367,12 @@ static Property virtio_pci_properties[] = { >> VIRTIO_PCI_FLAG_INIT_LNKCTL_BIT, true), >> DEFINE_PROP_BIT("x-pcie-pm-init", VirtIOPCIProxy, flags, >> VIRTIO_PCI_FLAG_INIT_PM_BIT, true), >> + /* >> + * for safety, set this false by default, if change it to true, >> + * need to consider compatible for old machine >> + */ >> + DEFINE_PROP_BIT("pcie-pm-no-soft-reset", VirtIOPCIProxy, flags, >> + VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET_BIT, false), >> DEFINE_PROP_BIT("x-pcie-flr-init", VirtIOPCIProxy, flags, >> VIRTIO_PCI_FLAG_INIT_FLR_BIT, true), >> DEFINE_PROP_BIT("aer", VirtIOPCIProxy, flags, >> diff --git a/include/hw/virtio/virtio-pci.h b/include/hw/virtio/virtio-pci.h >> index 59d88018c16a..9e67ba38c748 100644 >> --- a/include/hw/virtio/virtio-pci.h >> +++ b/include/hw/virtio/virtio-pci.h >> @@ -43,6 +43,7 @@ enum { >> VIRTIO_PCI_FLAG_INIT_FLR_BIT, >> VIRTIO_PCI_FLAG_AER_BIT, >> VIRTIO_PCI_FLAG_ATS_PAGE_ALIGNED_BIT, >> + VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET_BIT, >> }; >> >> /* Need to activate work-arounds for buggy guests at vmstate load. */ >> @@ -79,6 +80,10 @@ enum { >> /* Init Power Management */ >> #define VIRTIO_PCI_FLAG_INIT_PM (1 << VIRTIO_PCI_FLAG_INIT_PM_BIT) >> >> +/* Init The No_Soft_Reset bit of Power Management */ >> +#define VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET \ >> + (1 << VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET_BIT) >> + >> /* Init Function Level Reset capability */ >> #define VIRTIO_PCI_FLAG_INIT_FLR (1 << VIRTIO_PCI_FLAG_INIT_FLR_BIT) >> >
On Wed, Apr 17, 2024 at 6:13 AM Chen, Jiqian <Jiqian.Chen@amd.com> wrote: > > On 2024/4/16 23:45, Igor Mammedov wrote: > > On Tue, 16 Apr 2024 15:01:27 +0800 > > Jiqian Chen <Jiqian.Chen@amd.com> wrote: > > > >> In current code, when guest does S3, virtio-gpu are reset due to the > >> bit No_Soft_Reset is not set. After resetting, the display resources > >> of virtio-gpu are destroyed, then the display can't come back and only > >> show blank after resuming. > > > > Just a high level question. > > Typically when system goes into S3 all devices (modulo RAM) loose context > > (aka powered off), and then it's upto device driver to recover whatever > > was lost. > No, what you said is just one situation that when system goes into S3 devices loose context and fully reinitialized and be D0-uninitialized state. > The other situation is the context must be maintained so that the devices can quickly be D0-active state after resuming. > There are some descriptions in PCIe specification in Chapter 5.3.1.4 D3 state: > " Functional context is required to be maintained by Functions in the D3Hot state if the No_Soft_Reset field in the PMCSR is > Set. In this case, System Software is not required to re-initialize the Function after a transition from D3Hot to D0 (the > Function will be in the D0active state). If the No_Soft_Reset bit is Clear, functional context is not required to be > maintained by the Function in the D3Hot state, however it is not guaranteed that functional context will be cleared and > software must not depend on such behavior. As a result, in this case System Software is required to fully re-initialize the > Function after a transition to D0 as the Function will be in the D0uninitialized state." > BTW: according to Windows documentation D3 Hot state implementation is a must for real HW devices. https://learn.microsoft.com/en-us/windows-hardware/drivers/kernel/device-sleeping-states "Device power states D1, D2, and D3 are the device low-power states. Starting with Windows 8, D3 is divided into two substates, D3hot and D3cold. D1 and D2 are intermediate low-power states. Many classes of devices do not define these states. All devices must define D3hot." Best regards, Yan. > What's more, not all virtio devices' context can be recovered by driver after resuming, like virtio-gpu, we have not enough information to re-create all > display resources, that is discussed in my previous version email thread. > > > So why should we implement hw(qemu) workaround for a driver problem? > I think this is not a workaround, No_Soft_Reset bit is also described in PCIe specification, it can be set or not. > And we can set this bit for the specific device which we want to maintain context during S3. > > > > >> > >> Implement No_Soft_Reset bit of PCI_PM_CTRL register, then guest can check > >> this bit, if this bit is set, the devices resetting will not be done, and > >> then the display can work after resuming. > >> > >> No_Soft_Reset bit is implemented for all virtio devices, and was tested > >> only on virtio-gpu device. Set it false by default for safety. > >> > >> Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com> > >> --- > >> hw/virtio/virtio-pci.c | 37 ++++++++++++++++++++++++++++++++++ > >> include/hw/virtio/virtio-pci.h | 5 +++++ > >> 2 files changed, 42 insertions(+) > >> > >> diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c > >> index a1b61308e7a0..82fa4defe5cd 100644 > >> --- a/hw/virtio/virtio-pci.c > >> +++ b/hw/virtio/virtio-pci.c > >> @@ -2230,6 +2230,11 @@ static void virtio_pci_realize(PCIDevice *pci_dev, Error **errp) > >> pcie_cap_lnkctl_init(pci_dev); > >> } > >> > >> + if (proxy->flags & VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET) { > >> + pci_set_word(pci_dev->config + pos + PCI_PM_CTRL, > >> + PCI_PM_CTRL_NO_SOFT_RESET); > >> + } > >> + > >> if (proxy->flags & VIRTIO_PCI_FLAG_INIT_PM) { > >> /* Init Power Management Control Register */ > >> pci_set_word(pci_dev->wmask + pos + PCI_PM_CTRL, > >> @@ -2292,11 +2297,37 @@ static void virtio_pci_reset(DeviceState *qdev) > >> } > >> } > >> > >> +static bool virtio_pci_no_soft_reset(PCIDevice *dev) > >> +{ > >> + uint16_t pmcsr; > >> + > >> + if (!pci_is_express(dev) || !dev->exp.pm_cap) { > >> + return false; > >> + } > >> + > >> + pmcsr = pci_get_word(dev->config + dev->exp.pm_cap + PCI_PM_CTRL); > >> + > >> + /* > >> + * When No_Soft_Reset bit is set and the device > >> + * is in D3hot state, don't reset device > >> + */ > >> + return (pmcsr & PCI_PM_CTRL_NO_SOFT_RESET) && > >> + (pmcsr & PCI_PM_CTRL_STATE_MASK) == 3; > >> +} > >> + > >> static void virtio_pci_bus_reset_hold(Object *obj) > >> { > >> PCIDevice *dev = PCI_DEVICE(obj); > >> DeviceState *qdev = DEVICE(obj); > >> > >> + /* > >> + * Note that: a proposal to add SUSPEND bit is being discussed, > >> + * may need to consider the state of SUSPEND bit in future > >> + */ > >> + if (virtio_pci_no_soft_reset(dev)) { > >> + return; > >> + } > >> + > >> virtio_pci_reset(qdev); > >> > >> if (pci_is_express(dev)) { > >> @@ -2336,6 +2367,12 @@ static Property virtio_pci_properties[] = { > >> VIRTIO_PCI_FLAG_INIT_LNKCTL_BIT, true), > >> DEFINE_PROP_BIT("x-pcie-pm-init", VirtIOPCIProxy, flags, > >> VIRTIO_PCI_FLAG_INIT_PM_BIT, true), > >> + /* > >> + * for safety, set this false by default, if change it to true, > >> + * need to consider compatible for old machine > >> + */ > >> + DEFINE_PROP_BIT("pcie-pm-no-soft-reset", VirtIOPCIProxy, flags, > >> + VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET_BIT, false), > >> DEFINE_PROP_BIT("x-pcie-flr-init", VirtIOPCIProxy, flags, > >> VIRTIO_PCI_FLAG_INIT_FLR_BIT, true), > >> DEFINE_PROP_BIT("aer", VirtIOPCIProxy, flags, > >> diff --git a/include/hw/virtio/virtio-pci.h b/include/hw/virtio/virtio-pci.h > >> index 59d88018c16a..9e67ba38c748 100644 > >> --- a/include/hw/virtio/virtio-pci.h > >> +++ b/include/hw/virtio/virtio-pci.h > >> @@ -43,6 +43,7 @@ enum { > >> VIRTIO_PCI_FLAG_INIT_FLR_BIT, > >> VIRTIO_PCI_FLAG_AER_BIT, > >> VIRTIO_PCI_FLAG_ATS_PAGE_ALIGNED_BIT, > >> + VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET_BIT, > >> }; > >> > >> /* Need to activate work-arounds for buggy guests at vmstate load. */ > >> @@ -79,6 +80,10 @@ enum { > >> /* Init Power Management */ > >> #define VIRTIO_PCI_FLAG_INIT_PM (1 << VIRTIO_PCI_FLAG_INIT_PM_BIT) > >> > >> +/* Init The No_Soft_Reset bit of Power Management */ > >> +#define VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET \ > >> + (1 << VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET_BIT) > >> + > >> /* Init Function Level Reset capability */ > >> #define VIRTIO_PCI_FLAG_INIT_FLR (1 << VIRTIO_PCI_FLAG_INIT_FLR_BIT) > >> > > > > -- > Best regards, > Jiqian Chen.
On 2024/4/17 13:33, Yan Vugenfirer wrote: > On Wed, Apr 17, 2024 at 6:13 AM Chen, Jiqian <Jiqian.Chen@amd.com> wrote: >> >> On 2024/4/16 23:45, Igor Mammedov wrote: >>> On Tue, 16 Apr 2024 15:01:27 +0800 >>> Jiqian Chen <Jiqian.Chen@amd.com> wrote: >>> >>>> In current code, when guest does S3, virtio-gpu are reset due to the >>>> bit No_Soft_Reset is not set. After resetting, the display resources >>>> of virtio-gpu are destroyed, then the display can't come back and only >>>> show blank after resuming. >>> >>> Just a high level question. >>> Typically when system goes into S3 all devices (modulo RAM) loose context >>> (aka powered off), and then it's upto device driver to recover whatever >>> was lost. >> No, what you said is just one situation that when system goes into S3 devices loose context and fully reinitialized and be D0-uninitialized state. >> The other situation is the context must be maintained so that the devices can quickly be D0-active state after resuming. >> There are some descriptions in PCIe specification in Chapter 5.3.1.4 D3 state: >> " Functional context is required to be maintained by Functions in the D3Hot state if the No_Soft_Reset field in the PMCSR is >> Set. In this case, System Software is not required to re-initialize the Function after a transition from D3Hot to D0 (the >> Function will be in the D0active state). If the No_Soft_Reset bit is Clear, functional context is not required to be >> maintained by the Function in the D3Hot state, however it is not guaranteed that functional context will be cleared and >> software must not depend on such behavior. As a result, in this case System Software is required to fully re-initialize the >> Function after a transition to D0 as the Function will be in the D0uninitialized state." >> > BTW: according to Windows documentation D3 Hot state implementation is > a must for real HW devices. > https://learn.microsoft.com/en-us/windows-hardware/drivers/kernel/device-sleeping-states > "Device power states D1, D2, and D3 are the device low-power states. > Starting with Windows 8, D3 is divided into two substates, D3hot and > D3cold. > > D1 and D2 are intermediate low-power states. Many classes of devices > do not define these states. All devices must define D3hot." Yes, I know, it is also described in PCIe specification. But this is not a conflict. When set No_Soft_Reset didn’t mean the device can't enter D3hot state. It means when device enter D3hot, the context of device must be maintained. > > Best regards, > Yan. > > >> What's more, not all virtio devices' context can be recovered by driver after resuming, like virtio-gpu, we have not enough information to re-create all >> display resources, that is discussed in my previous version email thread. >> >>> So why should we implement hw(qemu) workaround for a driver problem? >> I think this is not a workaround, No_Soft_Reset bit is also described in PCIe specification, it can be set or not. >> And we can set this bit for the specific device which we want to maintain context during S3. >> >>> >>>> >>>> Implement No_Soft_Reset bit of PCI_PM_CTRL register, then guest can check >>>> this bit, if this bit is set, the devices resetting will not be done, and >>>> then the display can work after resuming. >>>> >>>> No_Soft_Reset bit is implemented for all virtio devices, and was tested >>>> only on virtio-gpu device. Set it false by default for safety. >>>> >>>> Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com> >>>> --- >>>> hw/virtio/virtio-pci.c | 37 ++++++++++++++++++++++++++++++++++ >>>> include/hw/virtio/virtio-pci.h | 5 +++++ >>>> 2 files changed, 42 insertions(+) >>>> >>>> diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c >>>> index a1b61308e7a0..82fa4defe5cd 100644 >>>> --- a/hw/virtio/virtio-pci.c >>>> +++ b/hw/virtio/virtio-pci.c >>>> @@ -2230,6 +2230,11 @@ static void virtio_pci_realize(PCIDevice *pci_dev, Error **errp) >>>> pcie_cap_lnkctl_init(pci_dev); >>>> } >>>> >>>> + if (proxy->flags & VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET) { >>>> + pci_set_word(pci_dev->config + pos + PCI_PM_CTRL, >>>> + PCI_PM_CTRL_NO_SOFT_RESET); >>>> + } >>>> + >>>> if (proxy->flags & VIRTIO_PCI_FLAG_INIT_PM) { >>>> /* Init Power Management Control Register */ >>>> pci_set_word(pci_dev->wmask + pos + PCI_PM_CTRL, >>>> @@ -2292,11 +2297,37 @@ static void virtio_pci_reset(DeviceState *qdev) >>>> } >>>> } >>>> >>>> +static bool virtio_pci_no_soft_reset(PCIDevice *dev) >>>> +{ >>>> + uint16_t pmcsr; >>>> + >>>> + if (!pci_is_express(dev) || !dev->exp.pm_cap) { >>>> + return false; >>>> + } >>>> + >>>> + pmcsr = pci_get_word(dev->config + dev->exp.pm_cap + PCI_PM_CTRL); >>>> + >>>> + /* >>>> + * When No_Soft_Reset bit is set and the device >>>> + * is in D3hot state, don't reset device >>>> + */ >>>> + return (pmcsr & PCI_PM_CTRL_NO_SOFT_RESET) && >>>> + (pmcsr & PCI_PM_CTRL_STATE_MASK) == 3; >>>> +} >>>> + >>>> static void virtio_pci_bus_reset_hold(Object *obj) >>>> { >>>> PCIDevice *dev = PCI_DEVICE(obj); >>>> DeviceState *qdev = DEVICE(obj); >>>> >>>> + /* >>>> + * Note that: a proposal to add SUSPEND bit is being discussed, >>>> + * may need to consider the state of SUSPEND bit in future >>>> + */ >>>> + if (virtio_pci_no_soft_reset(dev)) { >>>> + return; >>>> + } >>>> + >>>> virtio_pci_reset(qdev); >>>> >>>> if (pci_is_express(dev)) { >>>> @@ -2336,6 +2367,12 @@ static Property virtio_pci_properties[] = { >>>> VIRTIO_PCI_FLAG_INIT_LNKCTL_BIT, true), >>>> DEFINE_PROP_BIT("x-pcie-pm-init", VirtIOPCIProxy, flags, >>>> VIRTIO_PCI_FLAG_INIT_PM_BIT, true), >>>> + /* >>>> + * for safety, set this false by default, if change it to true, >>>> + * need to consider compatible for old machine >>>> + */ >>>> + DEFINE_PROP_BIT("pcie-pm-no-soft-reset", VirtIOPCIProxy, flags, >>>> + VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET_BIT, false), >>>> DEFINE_PROP_BIT("x-pcie-flr-init", VirtIOPCIProxy, flags, >>>> VIRTIO_PCI_FLAG_INIT_FLR_BIT, true), >>>> DEFINE_PROP_BIT("aer", VirtIOPCIProxy, flags, >>>> diff --git a/include/hw/virtio/virtio-pci.h b/include/hw/virtio/virtio-pci.h >>>> index 59d88018c16a..9e67ba38c748 100644 >>>> --- a/include/hw/virtio/virtio-pci.h >>>> +++ b/include/hw/virtio/virtio-pci.h >>>> @@ -43,6 +43,7 @@ enum { >>>> VIRTIO_PCI_FLAG_INIT_FLR_BIT, >>>> VIRTIO_PCI_FLAG_AER_BIT, >>>> VIRTIO_PCI_FLAG_ATS_PAGE_ALIGNED_BIT, >>>> + VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET_BIT, >>>> }; >>>> >>>> /* Need to activate work-arounds for buggy guests at vmstate load. */ >>>> @@ -79,6 +80,10 @@ enum { >>>> /* Init Power Management */ >>>> #define VIRTIO_PCI_FLAG_INIT_PM (1 << VIRTIO_PCI_FLAG_INIT_PM_BIT) >>>> >>>> +/* Init The No_Soft_Reset bit of Power Management */ >>>> +#define VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET \ >>>> + (1 << VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET_BIT) >>>> + >>>> /* Init Function Level Reset capability */ >>>> #define VIRTIO_PCI_FLAG_INIT_FLR (1 << VIRTIO_PCI_FLAG_INIT_FLR_BIT) >>>> >>> >> >> -- >> Best regards, >> Jiqian Chen. >
diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c index a1b61308e7a0..82fa4defe5cd 100644 --- a/hw/virtio/virtio-pci.c +++ b/hw/virtio/virtio-pci.c @@ -2230,6 +2230,11 @@ static void virtio_pci_realize(PCIDevice *pci_dev, Error **errp) pcie_cap_lnkctl_init(pci_dev); } + if (proxy->flags & VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET) { + pci_set_word(pci_dev->config + pos + PCI_PM_CTRL, + PCI_PM_CTRL_NO_SOFT_RESET); + } + if (proxy->flags & VIRTIO_PCI_FLAG_INIT_PM) { /* Init Power Management Control Register */ pci_set_word(pci_dev->wmask + pos + PCI_PM_CTRL, @@ -2292,11 +2297,37 @@ static void virtio_pci_reset(DeviceState *qdev) } } +static bool virtio_pci_no_soft_reset(PCIDevice *dev) +{ + uint16_t pmcsr; + + if (!pci_is_express(dev) || !dev->exp.pm_cap) { + return false; + } + + pmcsr = pci_get_word(dev->config + dev->exp.pm_cap + PCI_PM_CTRL); + + /* + * When No_Soft_Reset bit is set and the device + * is in D3hot state, don't reset device + */ + return (pmcsr & PCI_PM_CTRL_NO_SOFT_RESET) && + (pmcsr & PCI_PM_CTRL_STATE_MASK) == 3; +} + static void virtio_pci_bus_reset_hold(Object *obj) { PCIDevice *dev = PCI_DEVICE(obj); DeviceState *qdev = DEVICE(obj); + /* + * Note that: a proposal to add SUSPEND bit is being discussed, + * may need to consider the state of SUSPEND bit in future + */ + if (virtio_pci_no_soft_reset(dev)) { + return; + } + virtio_pci_reset(qdev); if (pci_is_express(dev)) { @@ -2336,6 +2367,12 @@ static Property virtio_pci_properties[] = { VIRTIO_PCI_FLAG_INIT_LNKCTL_BIT, true), DEFINE_PROP_BIT("x-pcie-pm-init", VirtIOPCIProxy, flags, VIRTIO_PCI_FLAG_INIT_PM_BIT, true), + /* + * for safety, set this false by default, if change it to true, + * need to consider compatible for old machine + */ + DEFINE_PROP_BIT("pcie-pm-no-soft-reset", VirtIOPCIProxy, flags, + VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET_BIT, false), DEFINE_PROP_BIT("x-pcie-flr-init", VirtIOPCIProxy, flags, VIRTIO_PCI_FLAG_INIT_FLR_BIT, true), DEFINE_PROP_BIT("aer", VirtIOPCIProxy, flags, diff --git a/include/hw/virtio/virtio-pci.h b/include/hw/virtio/virtio-pci.h index 59d88018c16a..9e67ba38c748 100644 --- a/include/hw/virtio/virtio-pci.h +++ b/include/hw/virtio/virtio-pci.h @@ -43,6 +43,7 @@ enum { VIRTIO_PCI_FLAG_INIT_FLR_BIT, VIRTIO_PCI_FLAG_AER_BIT, VIRTIO_PCI_FLAG_ATS_PAGE_ALIGNED_BIT, + VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET_BIT, }; /* Need to activate work-arounds for buggy guests at vmstate load. */ @@ -79,6 +80,10 @@ enum { /* Init Power Management */ #define VIRTIO_PCI_FLAG_INIT_PM (1 << VIRTIO_PCI_FLAG_INIT_PM_BIT) +/* Init The No_Soft_Reset bit of Power Management */ +#define VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET \ + (1 << VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET_BIT) + /* Init Function Level Reset capability */ #define VIRTIO_PCI_FLAG_INIT_FLR (1 << VIRTIO_PCI_FLAG_INIT_FLR_BIT)
In current code, when guest does S3, virtio-gpu are reset due to the bit No_Soft_Reset is not set. After resetting, the display resources of virtio-gpu are destroyed, then the display can't come back and only show blank after resuming. Implement No_Soft_Reset bit of PCI_PM_CTRL register, then guest can check this bit, if this bit is set, the devices resetting will not be done, and then the display can work after resuming. No_Soft_Reset bit is implemented for all virtio devices, and was tested only on virtio-gpu device. Set it false by default for safety. Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com> --- hw/virtio/virtio-pci.c | 37 ++++++++++++++++++++++++++++++++++ include/hw/virtio/virtio-pci.h | 5 +++++ 2 files changed, 42 insertions(+)