Message ID | 20240215-rpmh-rsc-fixes-v4-1-9cbddfcba05b@quicinc.com (mailing list archive) |
---|---|
State | Accepted |
Commit | f592cc5794747b81e53b53dd6e80219ee25f0611 |
Headers | show |
Series | [v4] soc: qcom: rpmh-rsc: Enhance check for VRM in-flight request | expand |
On Thu, Feb 15, 2024 at 10:55:44AM +0530, Maulik Shah wrote: > Each RPMh VRM accelerator resource has 3 or 4 contiguous 4-byte aligned > addresses associated with it. These control voltage, enable state, mode, > and in legacy targets, voltage headroom. The current in-flight request > checking logic looks for exact address matches. Requests for different > addresses of the same RPMh resource as thus not detected as in-flight. > > Add new cmd-db API cmd_db_match_resource_addr() to enhance the in-flight > request check for VRM requests by ignoring the address offset. > > This ensures that only one request is allowed to be in-flight for a given > VRM resource. This is needed to avoid scenarios where request commands are > carried out by RPMh hardware out-of-order leading to LDO regulator > over-current protection triggering. > > Fixes: 658628e7ef78 ("drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs") > cc: stable@vger.kernel.org > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> > Tested-by: Elliot Berman <quic_eberman@quicinc.com> # sm8650-qrd > Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com> > --- > Changes in v4: > - Simplify cmd_db_match_resource_addr() > - Remove unrelated changes to newly added logic > - Update function description comments You changed things, but retained Konrad's Reviewed-by... > - Replace Signed-off-by: with Tested-by: from Elliot Did Elliot test v4, or did you just translate his incorrect(?) s-o-b from v1 into a tested-by? We're about to write into the git history that Elliot says this version is tested to the best of his abilities... > - Link to v3: https://lore.kernel.org/r/20240212-rpmh-rsc-fixes-v3-1-1be0d705dbb5@quicinc.com > Changes in v3: > - Fix s-o-b chain > - Add cmd-db API to compare addresses > - Reuse already defined resource types in cmd-db > - Add Fixes tag and Cc to stable > - Retain Reviewed-by tag of v2 > - Link to v2: https://lore.kernel.org/r/20240119-rpmh-rsc-fixes-v2-1-e42c0a9e36f0@quicinc.com > Changes in v2: > - Use GENMASK() and FIELD_GET() > - Link to v1: https://lore.kernel.org/r/20240117-rpmh-rsc-fixes-v1-1-71ee4f8f72a4@quicinc.com > --- > drivers/soc/qcom/cmd-db.c | 32 +++++++++++++++++++++++++++++++- > drivers/soc/qcom/rpmh-rsc.c | 3 ++- > include/soc/qcom/cmd-db.h | 10 +++++++++- > 3 files changed, 42 insertions(+), 3 deletions(-) > > diff --git a/drivers/soc/qcom/cmd-db.c b/drivers/soc/qcom/cmd-db.c > index a5fd68411bed..86fb2cd4f484 100644 > --- a/drivers/soc/qcom/cmd-db.c > +++ b/drivers/soc/qcom/cmd-db.c > @@ -1,6 +1,10 @@ > /* SPDX-License-Identifier: GPL-2.0 */ > -/* Copyright (c) 2016-2018, 2020, The Linux Foundation. All rights reserved. */ > +/* > + * Copyright (c) 2016-2018, 2020, The Linux Foundation. All rights reserved. > + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. > + */ > > +#include <linux/bitfield.h> > #include <linux/debugfs.h> > #include <linux/kernel.h> > #include <linux/module.h> > @@ -17,6 +21,8 @@ > #define MAX_SLV_ID 8 > #define SLAVE_ID_MASK 0x7 > #define SLAVE_ID_SHIFT 16 > +#define SLAVE_ID(addr) FIELD_GET(GENMASK(19, 16), addr) > +#define VRM_ADDR(addr) FIELD_GET(GENMASK(19, 4), addr) > > /** > * struct entry_header: header for each entry in cmddb > @@ -220,6 +226,30 @@ const void *cmd_db_read_aux_data(const char *id, size_t *len) > } > EXPORT_SYMBOL_GPL(cmd_db_read_aux_data); > > +/** > + * cmd_db_match_resource_addr() - Compare if both Resource addresses are same > + * > + * @addr1: Resource address to compare > + * @addr2: Resource address to compare > + * > + * Return: true if two addresses refer to the same resource, false otherwise > + */ > +bool cmd_db_match_resource_addr(u32 addr1, u32 addr2) > +{ > + /* > + * Each RPMh VRM accelerator resource has 3 or 4 contiguous 4-byte > + * aligned addresses associated with it. Ignore the offset to check > + * for VRM requests. > + */ > + if (addr1 == addr2) > + return true; > + else if (SLAVE_ID(addr1) == CMD_DB_HW_VRM && VRM_ADDR(addr1) == VRM_ADDR(addr2)) Is it a fact or a coincidence that GENMASK(19, 16) of the address happens to have the same value as the associated rsc_hdr's slv_id? I recognize that we probably don't want to start naively traversing the headers here, but as previously requested I would still like to have an interface where I can pass in an address and have its entry_header->id resolved, for tracing/debug purposes. Perhaps there's some common ground? Regards, Bjorn > + return true; > + > + return false; > +} > +EXPORT_SYMBOL_GPL(cmd_db_match_resource_addr); > + > /** > * cmd_db_read_slave_id - Get the slave ID for a given resource address > * > diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c > index a021dc71807b..daf64be966fe 100644 > --- a/drivers/soc/qcom/rpmh-rsc.c > +++ b/drivers/soc/qcom/rpmh-rsc.c > @@ -1,6 +1,7 @@ > // SPDX-License-Identifier: GPL-2.0 > /* > * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. > + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. > */ > > #define pr_fmt(fmt) "%s " fmt, KBUILD_MODNAME > @@ -557,7 +558,7 @@ static int check_for_req_inflight(struct rsc_drv *drv, struct tcs_group *tcs, > for_each_set_bit(j, &curr_enabled, MAX_CMDS_PER_TCS) { > addr = read_tcs_cmd(drv, drv->regs[RSC_DRV_CMD_ADDR], i, j); > for (k = 0; k < msg->num_cmds; k++) { > - if (addr == msg->cmds[k].addr) > + if (cmd_db_match_resource_addr(msg->cmds[k].addr, addr)) > return -EBUSY; > } > } > diff --git a/include/soc/qcom/cmd-db.h b/include/soc/qcom/cmd-db.h > index c8bb56e6852a..47a6cab75e63 100644 > --- a/include/soc/qcom/cmd-db.h > +++ b/include/soc/qcom/cmd-db.h > @@ -1,5 +1,8 @@ > /* SPDX-License-Identifier: GPL-2.0 */ > -/* Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. */ > +/* > + * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. > + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. > + */ > > #ifndef __QCOM_COMMAND_DB_H__ > #define __QCOM_COMMAND_DB_H__ > @@ -21,6 +24,8 @@ u32 cmd_db_read_addr(const char *resource_id); > > const void *cmd_db_read_aux_data(const char *resource_id, size_t *len); > > +bool cmd_db_match_resource_addr(u32 addr1, u32 addr2); > + > enum cmd_db_hw_type cmd_db_read_slave_id(const char *resource_id); > > int cmd_db_ready(void); > @@ -31,6 +36,9 @@ static inline u32 cmd_db_read_addr(const char *resource_id) > static inline const void *cmd_db_read_aux_data(const char *resource_id, size_t *len) > { return ERR_PTR(-ENODEV); } > > +static inline bool cmd_db_match_resource_addr(u32 addr1, u32 addr2) > +{ return false; } > + > static inline enum cmd_db_hw_type cmd_db_read_slave_id(const char *resource_id) > { return -ENODEV; } > > > --- > base-commit: 615d300648869c774bd1fe54b4627bb0c20faed4 > change-id: 20240210-rpmh-rsc-fixes-372a79ab364b > > Best regards, > -- > Maulik Shah <quic_mkshah@quicinc.com> >
On Sun, Mar 17, 2024 at 10:18:25PM -0500, Bjorn Andersson wrote: > On Thu, Feb 15, 2024 at 10:55:44AM +0530, Maulik Shah wrote: > > Each RPMh VRM accelerator resource has 3 or 4 contiguous 4-byte aligned > > addresses associated with it. These control voltage, enable state, mode, > > and in legacy targets, voltage headroom. The current in-flight request > > checking logic looks for exact address matches. Requests for different > > addresses of the same RPMh resource as thus not detected as in-flight. > > > > Add new cmd-db API cmd_db_match_resource_addr() to enhance the in-flight > > request check for VRM requests by ignoring the address offset. > > > > This ensures that only one request is allowed to be in-flight for a given > > VRM resource. This is needed to avoid scenarios where request commands are > > carried out by RPMh hardware out-of-order leading to LDO regulator > > over-current protection triggering. > > > > Fixes: 658628e7ef78 ("drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs") > > cc: stable@vger.kernel.org > > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> > > Tested-by: Elliot Berman <quic_eberman@quicinc.com> # sm8650-qrd > > Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com> > > --- > > Changes in v4: > > - Simplify cmd_db_match_resource_addr() > > - Remove unrelated changes to newly added logic > > - Update function description comments > > You changed things, but retained Konrad's Reviewed-by... > > > - Replace Signed-off-by: with Tested-by: from Elliot > > Did Elliot test v4, or did you just translate his incorrect(?) s-o-b > from v1 into a tested-by? > > We're about to write into the git history that Elliot says this version > is tested to the best of his abilities... > No, I asked for it: https://lore.kernel.org/all/20240214105605460-0800.eberman@hu-eberman-lv.qualcomm.com/
On Thu, 15 Feb 2024 10:55:44 +0530, Maulik Shah wrote: > Each RPMh VRM accelerator resource has 3 or 4 contiguous 4-byte aligned > addresses associated with it. These control voltage, enable state, mode, > and in legacy targets, voltage headroom. The current in-flight request > checking logic looks for exact address matches. Requests for different > addresses of the same RPMh resource as thus not detected as in-flight. > > Add new cmd-db API cmd_db_match_resource_addr() to enhance the in-flight > request check for VRM requests by ignoring the address offset. > > [...] Applied, thanks! [1/1] soc: qcom: rpmh-rsc: Enhance check for VRM in-flight request commit: f592cc5794747b81e53b53dd6e80219ee25f0611 Best regards,
diff --git a/drivers/soc/qcom/cmd-db.c b/drivers/soc/qcom/cmd-db.c index a5fd68411bed..86fb2cd4f484 100644 --- a/drivers/soc/qcom/cmd-db.c +++ b/drivers/soc/qcom/cmd-db.c @@ -1,6 +1,10 @@ /* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright (c) 2016-2018, 2020, The Linux Foundation. All rights reserved. */ +/* + * Copyright (c) 2016-2018, 2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ +#include <linux/bitfield.h> #include <linux/debugfs.h> #include <linux/kernel.h> #include <linux/module.h> @@ -17,6 +21,8 @@ #define MAX_SLV_ID 8 #define SLAVE_ID_MASK 0x7 #define SLAVE_ID_SHIFT 16 +#define SLAVE_ID(addr) FIELD_GET(GENMASK(19, 16), addr) +#define VRM_ADDR(addr) FIELD_GET(GENMASK(19, 4), addr) /** * struct entry_header: header for each entry in cmddb @@ -220,6 +226,30 @@ const void *cmd_db_read_aux_data(const char *id, size_t *len) } EXPORT_SYMBOL_GPL(cmd_db_read_aux_data); +/** + * cmd_db_match_resource_addr() - Compare if both Resource addresses are same + * + * @addr1: Resource address to compare + * @addr2: Resource address to compare + * + * Return: true if two addresses refer to the same resource, false otherwise + */ +bool cmd_db_match_resource_addr(u32 addr1, u32 addr2) +{ + /* + * Each RPMh VRM accelerator resource has 3 or 4 contiguous 4-byte + * aligned addresses associated with it. Ignore the offset to check + * for VRM requests. + */ + if (addr1 == addr2) + return true; + else if (SLAVE_ID(addr1) == CMD_DB_HW_VRM && VRM_ADDR(addr1) == VRM_ADDR(addr2)) + return true; + + return false; +} +EXPORT_SYMBOL_GPL(cmd_db_match_resource_addr); + /** * cmd_db_read_slave_id - Get the slave ID for a given resource address * diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c index a021dc71807b..daf64be966fe 100644 --- a/drivers/soc/qcom/rpmh-rsc.c +++ b/drivers/soc/qcom/rpmh-rsc.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. */ #define pr_fmt(fmt) "%s " fmt, KBUILD_MODNAME @@ -557,7 +558,7 @@ static int check_for_req_inflight(struct rsc_drv *drv, struct tcs_group *tcs, for_each_set_bit(j, &curr_enabled, MAX_CMDS_PER_TCS) { addr = read_tcs_cmd(drv, drv->regs[RSC_DRV_CMD_ADDR], i, j); for (k = 0; k < msg->num_cmds; k++) { - if (addr == msg->cmds[k].addr) + if (cmd_db_match_resource_addr(msg->cmds[k].addr, addr)) return -EBUSY; } } diff --git a/include/soc/qcom/cmd-db.h b/include/soc/qcom/cmd-db.h index c8bb56e6852a..47a6cab75e63 100644 --- a/include/soc/qcom/cmd-db.h +++ b/include/soc/qcom/cmd-db.h @@ -1,5 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. */ +/* + * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ #ifndef __QCOM_COMMAND_DB_H__ #define __QCOM_COMMAND_DB_H__ @@ -21,6 +24,8 @@ u32 cmd_db_read_addr(const char *resource_id); const void *cmd_db_read_aux_data(const char *resource_id, size_t *len); +bool cmd_db_match_resource_addr(u32 addr1, u32 addr2); + enum cmd_db_hw_type cmd_db_read_slave_id(const char *resource_id); int cmd_db_ready(void); @@ -31,6 +36,9 @@ static inline u32 cmd_db_read_addr(const char *resource_id) static inline const void *cmd_db_read_aux_data(const char *resource_id, size_t *len) { return ERR_PTR(-ENODEV); } +static inline bool cmd_db_match_resource_addr(u32 addr1, u32 addr2) +{ return false; } + static inline enum cmd_db_hw_type cmd_db_read_slave_id(const char *resource_id) { return -ENODEV; }