| Message ID | 20240422093926.15392-2-macpaul.lin@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/3] arm64: dts: mediatek: mt8390-genio-700-evk: update regulator names | expand |
Il 22/04/24 11:39, Macpaul Lin ha scritto: > 1. Add i2c to aliases. > 2. Add MUX IT5205 support to i2c1. > 3. Add TYPEC RT1715 support to i2c4. > 4. Add PMIC_KEY setting. > 5. Add USB HUB TUSB8020 to xhci1. > > Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> > --- > .../dts/mediatek/mt8390-genio-700-evk.dts | 56 ++++++++++++++++++- > 1 file changed, 55 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts > index 9b7ad046f193..17f22b1836bf 100644 > --- a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts > +++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts > @@ -23,6 +23,15 @@ > "mediatek,mt8188"; > > aliases { > + i2c0 = &i2c0; > + i2c1 = &i2c1; > + i2c2 = &i2c2; > + i2c3 = &i2c3; > + i2c4 = &i2c4; > + i2c5 = &i2c5; > + i2c6 = &i2c6; > + mmc0 = &mmc0; > + mmc1 = &mmc1; > serial0 = &uart0; > }; > > @@ -225,6 +234,16 @@ > pinctrl-0 = <&i2c1_pins>; > clock-frequency = <400000>; > status = "okay"; > + > + typec-mux@48 { > + compatible = "ite,it5205"; > + reg = <0x48>; > + > + mode-switch; > + orientation-switch; > + > + vcc-supply = <&mt6359_vcn33_1_bt_ldo_reg>; > + }; > }; > > &i2c2 { > @@ -242,11 +261,19 @@ > }; > > &i2c4 { > - pinctrl-names = "default"; > + pinctrl-names = "default", "default"; > pinctrl-0 = <&i2c4_pins>; > pinctrl-1 = <&rt1715_int_pins>; This should be pinctrl-names = "default"; pinctrl-0 = <&i2c4_pins>; > clock-frequency = <1000000>; > status = "okay"; > + > + rt1715@4e { > + compatible = "richtek,rt1715"; > + reg = <0x4e>; > + interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>; > + vbus-supply = <&usb_p1_vbus>; pinctrl-names = "default"; pinctrl-0 = <&rt1715_int_pins>; Cheers, Angelo > + status = "okay"; > + }; > }; > > &i2c5 { > @@ -836,6 +863,17 @@ > &pmic { > interrupt-parent = <&pio>; > interrupts = <222 IRQ_TYPE_LEVEL_HIGH>; > + > + mt6359keys: keys { > + compatible = "mediatek,mt6359-keys"; > + mediatek,long-press-mode = <1>; > + power-off-time-sec = <0>; > + > + power-key { > + linux,keycodes = <KEY_POWER>; > + wakeup-source; > + }; > + }; > }; > > &scp { > @@ -890,6 +928,22 @@ > &xhci1 { > status = "okay"; > vusb33-supply = <&mt6359_vusb_ldo_reg>; > + > + hub_2_0: hub@1 { > + compatible = "usb451,8025"; > + reg = <1>; > + peer-hub = <&hub_3_0>; > + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; > + vdd-supply = <&usb_hub_fixed_3v3>; > + }; > + > + hub_3_0: hub@2 { > + compatible = "usb451,8027"; > + reg = <2>; > + peer-hub = <&hub_2_0>; > + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; > + vdd-supply = <&usb_hub_fixed_3v3>; > + }; > }; > > &xhci2 {
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts index 9b7ad046f193..17f22b1836bf 100644 --- a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts @@ -23,6 +23,15 @@ "mediatek,mt8188"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + mmc0 = &mmc0; + mmc1 = &mmc1; serial0 = &uart0; }; @@ -225,6 +234,16 @@ pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; status = "okay"; + + typec-mux@48 { + compatible = "ite,it5205"; + reg = <0x48>; + + mode-switch; + orientation-switch; + + vcc-supply = <&mt6359_vcn33_1_bt_ldo_reg>; + }; }; &i2c2 { @@ -242,11 +261,19 @@ }; &i2c4 { - pinctrl-names = "default"; + pinctrl-names = "default", "default"; pinctrl-0 = <&i2c4_pins>; pinctrl-1 = <&rt1715_int_pins>; clock-frequency = <1000000>; status = "okay"; + + rt1715@4e { + compatible = "richtek,rt1715"; + reg = <0x4e>; + interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>; + vbus-supply = <&usb_p1_vbus>; + status = "okay"; + }; }; &i2c5 { @@ -836,6 +863,17 @@ &pmic { interrupt-parent = <&pio>; interrupts = <222 IRQ_TYPE_LEVEL_HIGH>; + + mt6359keys: keys { + compatible = "mediatek,mt6359-keys"; + mediatek,long-press-mode = <1>; + power-off-time-sec = <0>; + + power-key { + linux,keycodes = <KEY_POWER>; + wakeup-source; + }; + }; }; &scp { @@ -890,6 +928,22 @@ &xhci1 { status = "okay"; vusb33-supply = <&mt6359_vusb_ldo_reg>; + + hub_2_0: hub@1 { + compatible = "usb451,8025"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; + }; + + hub_3_0: hub@2 { + compatible = "usb451,8027"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; + }; }; &xhci2 {
1. Add i2c to aliases. 2. Add MUX IT5205 support to i2c1. 3. Add TYPEC RT1715 support to i2c4. 4. Add PMIC_KEY setting. 5. Add USB HUB TUSB8020 to xhci1. Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> --- .../dts/mediatek/mt8390-genio-700-evk.dts | 56 ++++++++++++++++++- 1 file changed, 55 insertions(+), 1 deletion(-)