Message ID | 20240422-b4-dts_dxl_audio-v3-3-5017511f399e@nxp.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | arm64: dts: imx8dxl: add audio support for imx8dxl | expand |
On Mon, Apr 22, 2024 at 02:44:54PM -0400, Frank Li wrote: > Add audio nodes for imx8dxl-evk boards. > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > --- > arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 231 ++++++++++++++++++++++++++ > 1 file changed, 231 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts > index 2123d431e0613..5b5a7b47217c3 100644 > --- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts > +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts > @@ -125,6 +125,78 @@ mii_select: regulator-4 { > enable-active-high; > regulator-always-on; > }; > + > + bt_sco_codec: audio-codec-bt { > + compatible = "linux,bt-sco"; > + #sound-dai-cells = <1>; > + }; > + > + sound-bt-sco { > + compatible = "simple-audio-card"; > + simple-audio-card,name = "bt-sco-audio"; > + simple-audio-card,format = "dsp_a"; > + simple-audio-card,bitclock-inversion; > + simple-audio-card,frame-master = <&btcpu>; > + simple-audio-card,bitclock-master = <&btcpu>; > + > + btcpu: simple-audio-card,cpu { > + sound-dai = <&sai0>; > + dai-tdm-slot-num = <2>; > + dai-tdm-slot-width = <16>; > + }; > + > + simple-audio-card,codec { > + sound-dai = <&bt_sco_codec 1>; > + }; > + }; > + > + sound-wm8960-1 { > + compatible = "fsl,imx7d-evk-wm8960", "fsl,imx-audio-wm8960"; > + model = "wm8960-audio"; > + audio-cpu = <&sai1>; > + audio-codec = <&wm8960_1>; > + audio-asrc = <&asrc0>; > + audio-routing = "Headphone Jack", "HP_L", > + "Headphone Jack", "HP_R", > + "Ext Spk", "SPK_LP", > + "Ext Spk", "SPK_LN", > + "Ext Spk", "SPK_RP", > + "Ext Spk", "SPK_RN", > + "LINPUT1", "Mic Jack", > + "Mic Jack", "MICB"; > + }; > + > + sound-wm8960-2 { > + compatible = "fsl,imx7d-evk-wm8960", "fsl,imx-audio-wm8960"; > + model = "wm8960-audio-2"; > + audio-cpu = <&sai2>; > + audio-codec = <&wm8960_2>; > + audio-routing = > + "Headphone Jack", "HP_L", > + "Headphone Jack", "HP_R", > + "Ext Spk", "SPK_LP", > + "Ext Spk", "SPK_LN", > + "Ext Spk", "SPK_RP", > + "Ext Spk", "SPK_RN", > + "LINPUT1", "Mic Jack", > + "Mic Jack", "MICB"; Sorry, I just change sound-wm8960-1 and forget change this one and sound-wm8960-3, will fix it at next version. Frank > + }; > + > + sound-wm8960-3 { > + compatible = "fsl,imx7d-evk-wm8960", "fsl,imx-audio-wm8960"; > + model = "wm8960-audio-3"; > + audio-cpu = <&sai3>; > + audio-codec = <&wm8960_3>; > + audio-routing = > + "Headphone Jack", "HP_L", > + "Headphone Jack", "HP_R", > + "Ext Spk", "SPK_LP", > + "Ext Spk", "SPK_LN", > + "Ext Spk", "SPK_RP", > + "Ext Spk", "SPK_RN", > + "LINPUT1", "Mic Jack", > + "Mic Jack", "MICB"; > + }; > }; > > &adc0 { > @@ -132,6 +204,11 @@ &adc0 { > status = "okay"; > }; > > +&asrc0 { > + fsl,asrc-rate = <48000>; > + status = "okay"; > +}; > + > &eqos { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_eqos>; > @@ -259,6 +336,78 @@ max7322: gpio@68 { > }; > }; > > + i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x1>; > + > + wm8960_1: audio-codec@1a { > + compatible = "wlf,wm8960"; > + reg = <0x1a>; > + clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>; > + clock-names = "mclk"; > + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, > + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, > + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, > + <&mclkout1_lpcg IMX_LPCG_CLK_0>; > + assigned-clock-rates = <786432000>, > + <49152000>, > + <12288000>, > + <12288000>; > + wlf,shared-lrclk; > + wlf,hp-cfg = <2 2 3>; > + wlf,gpio-cfg = <1 3>; > + }; > + }; > + > + i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x2>; > + > + wm8960_2: audio-codec@1a { > + compatible = "wlf,wm8960"; > + reg = <0x1a>; > + clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>; > + clock-names = "mclk"; > + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, > + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, > + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, > + <&mclkout1_lpcg IMX_LPCG_CLK_0>; > + assigned-clock-rates = <786432000>, > + <49152000>, > + <12288000>, > + <12288000>; > + wlf,shared-lrclk; > + wlf,hp-cfg = <2 2 3>; > + wlf,gpio-cfg = <1 3>; > + }; > + }; > + > + i2c@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x3>; > + > + wm8960_3: audio-codec@1a { > + compatible = "wlf,wm8960"; > + reg = <0x1a>; > + clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>; > + clock-names = "mclk"; > + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, > + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, > + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, > + <&mclkout1_lpcg IMX_LPCG_CLK_0>; > + assigned-clock-rates = <786432000>, > + <49152000>, > + <12288000>, > + <12288000>; > + wlf,shared-lrclk; > + wlf,hp-cfg = <2 2 3>; > + wlf,gpio-cfg = <1 3>; > + }; > + }; > + > i2c@4 { > #address-cells = <1>; > #size-cells = <0>; > @@ -362,6 +511,53 @@ &lsio_gpio5 { > status = "okay"; > }; > > +&sai0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_sai0>; > + #sound-dai-cells = <0>; > + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, > + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, > + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, > + <&sai0_lpcg IMX_LPCG_CLK_0>; > + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; > + status = "okay"; > +}; > + > +&sai1 { > + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, > + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, > + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, > + <&sai1_lpcg IMX_LPCG_CLK_0>; > + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_sai1>; > + status = "okay"; > +}; > + > +&sai2 { > + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, > + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, > + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, > + <&sai2_lpcg IMX_LPCG_CLK_0>; > + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_sai2>; > + fsl,sai-asynchronous; > + status = "okay"; > +}; > + > +&sai3 { > + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, > + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, > + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, > + <&sai3_lpcg IMX_LPCG_CLK_0>; > + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_sai3>; > + fsl,sai-asynchronous; > + status = "okay"; > +}; > + > &thermal_zones { > pmic-thermal { > polling-delay-passive = <250>; > @@ -595,6 +791,41 @@ IMX8DXL_UART0_TX_ADMA_UART0_TX 0x06000020 > >; > }; > > + pinctrl_sai0: sai0grp { > + fsl,pins = < > + IMX8DXL_SPI0_CS0_ADMA_SAI0_RXD 0x06000060 > + IMX8DXL_SPI0_CS1_ADMA_SAI0_RXC 0x06000040 > + IMX8DXL_SPI0_SCK_ADMA_SAI0_TXC 0x06000060 > + IMX8DXL_SPI0_SDI_ADMA_SAI0_TXD 0x06000060 > + IMX8DXL_SPI0_SDO_ADMA_SAI0_TXFS 0x06000040 > + >; > + }; > + > + pinctrl_sai1: sai1grp { > + fsl,pins = < > + IMX8DXL_FLEXCAN0_RX_ADMA_SAI1_TXC 0x06000040 > + IMX8DXL_FLEXCAN0_TX_ADMA_SAI1_TXFS 0x06000040 > + IMX8DXL_FLEXCAN1_RX_ADMA_SAI1_TXD 0x06000060 > + IMX8DXL_FLEXCAN1_TX_ADMA_SAI1_RXD 0x06000060 > + >; > + }; > + > + pinctrl_sai2: sai2grp { > + fsl,pins = < > + IMX8DXL_SNVS_TAMPER_OUT3_ADMA_SAI2_RXC 0x06000040 > + IMX8DXL_SNVS_TAMPER_IN0_ADMA_SAI2_RXFS 0x06000040 > + IMX8DXL_SNVS_TAMPER_OUT4_ADMA_SAI2_RXD 0x06000060 > + >; > + }; > + > + pinctrl_sai3: sai3grp { > + fsl,pins = < > + IMX8DXL_SNVS_TAMPER_IN1_ADMA_SAI3_RXC 0x06000040 > + IMX8DXL_SNVS_TAMPER_IN3_ADMA_SAI3_RXFS 0x06000040 > + IMX8DXL_SNVS_TAMPER_IN2_ADMA_SAI3_RXD 0x06000060 > + >; > + }; > + > pinctrl_usdhc1: usdhc1grp { > fsl,pins = < > IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 > > -- > 2.34.1 >
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts index 2123d431e0613..5b5a7b47217c3 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts @@ -125,6 +125,78 @@ mii_select: regulator-4 { enable-active-high; regulator-always-on; }; + + bt_sco_codec: audio-codec-bt { + compatible = "linux,bt-sco"; + #sound-dai-cells = <1>; + }; + + sound-bt-sco { + compatible = "simple-audio-card"; + simple-audio-card,name = "bt-sco-audio"; + simple-audio-card,format = "dsp_a"; + simple-audio-card,bitclock-inversion; + simple-audio-card,frame-master = <&btcpu>; + simple-audio-card,bitclock-master = <&btcpu>; + + btcpu: simple-audio-card,cpu { + sound-dai = <&sai0>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + + simple-audio-card,codec { + sound-dai = <&bt_sco_codec 1>; + }; + }; + + sound-wm8960-1 { + compatible = "fsl,imx7d-evk-wm8960", "fsl,imx-audio-wm8960"; + model = "wm8960-audio"; + audio-cpu = <&sai1>; + audio-codec = <&wm8960_1>; + audio-asrc = <&asrc0>; + audio-routing = "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "LINPUT1", "Mic Jack", + "Mic Jack", "MICB"; + }; + + sound-wm8960-2 { + compatible = "fsl,imx7d-evk-wm8960", "fsl,imx-audio-wm8960"; + model = "wm8960-audio-2"; + audio-cpu = <&sai2>; + audio-codec = <&wm8960_2>; + audio-routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "LINPUT1", "Mic Jack", + "Mic Jack", "MICB"; + }; + + sound-wm8960-3 { + compatible = "fsl,imx7d-evk-wm8960", "fsl,imx-audio-wm8960"; + model = "wm8960-audio-3"; + audio-cpu = <&sai3>; + audio-codec = <&wm8960_3>; + audio-routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "LINPUT1", "Mic Jack", + "Mic Jack", "MICB"; + }; }; &adc0 { @@ -132,6 +204,11 @@ &adc0 { status = "okay"; }; +&asrc0 { + fsl,asrc-rate = <48000>; + status = "okay"; +}; + &eqos { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_eqos>; @@ -259,6 +336,78 @@ max7322: gpio@68 { }; }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + wm8960_1: audio-codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>; + clock-names = "mclk"; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout1_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, + <49152000>, + <12288000>, + <12288000>; + wlf,shared-lrclk; + wlf,hp-cfg = <2 2 3>; + wlf,gpio-cfg = <1 3>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + wm8960_2: audio-codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>; + clock-names = "mclk"; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout1_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, + <49152000>, + <12288000>, + <12288000>; + wlf,shared-lrclk; + wlf,hp-cfg = <2 2 3>; + wlf,gpio-cfg = <1 3>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + wm8960_3: audio-codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>; + clock-names = "mclk"; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout1_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, + <49152000>, + <12288000>, + <12288000>; + wlf,shared-lrclk; + wlf,hp-cfg = <2 2 3>; + wlf,gpio-cfg = <1 3>; + }; + }; + i2c@4 { #address-cells = <1>; #size-cells = <0>; @@ -362,6 +511,53 @@ &lsio_gpio5 { status = "okay"; }; +&sai0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai0>; + #sound-dai-cells = <0>; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&sai0_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; + status = "okay"; +}; + +&sai1 { + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&sai1_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + status = "okay"; +}; + +&sai2 { + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&sai2_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + fsl,sai-asynchronous; + status = "okay"; +}; + +&sai3 { + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&sai3_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + fsl,sai-asynchronous; + status = "okay"; +}; + &thermal_zones { pmic-thermal { polling-delay-passive = <250>; @@ -595,6 +791,41 @@ IMX8DXL_UART0_TX_ADMA_UART0_TX 0x06000020 >; }; + pinctrl_sai0: sai0grp { + fsl,pins = < + IMX8DXL_SPI0_CS0_ADMA_SAI0_RXD 0x06000060 + IMX8DXL_SPI0_CS1_ADMA_SAI0_RXC 0x06000040 + IMX8DXL_SPI0_SCK_ADMA_SAI0_TXC 0x06000060 + IMX8DXL_SPI0_SDI_ADMA_SAI0_TXD 0x06000060 + IMX8DXL_SPI0_SDO_ADMA_SAI0_TXFS 0x06000040 + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + IMX8DXL_FLEXCAN0_RX_ADMA_SAI1_TXC 0x06000040 + IMX8DXL_FLEXCAN0_TX_ADMA_SAI1_TXFS 0x06000040 + IMX8DXL_FLEXCAN1_RX_ADMA_SAI1_TXD 0x06000060 + IMX8DXL_FLEXCAN1_TX_ADMA_SAI1_RXD 0x06000060 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + IMX8DXL_SNVS_TAMPER_OUT3_ADMA_SAI2_RXC 0x06000040 + IMX8DXL_SNVS_TAMPER_IN0_ADMA_SAI2_RXFS 0x06000040 + IMX8DXL_SNVS_TAMPER_OUT4_ADMA_SAI2_RXD 0x06000060 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + IMX8DXL_SNVS_TAMPER_IN1_ADMA_SAI3_RXC 0x06000040 + IMX8DXL_SNVS_TAMPER_IN3_ADMA_SAI3_RXFS 0x06000040 + IMX8DXL_SNVS_TAMPER_IN2_ADMA_SAI3_RXD 0x06000060 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
Add audio nodes for imx8dxl-evk boards. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 231 ++++++++++++++++++++++++++ 1 file changed, 231 insertions(+)