| Message ID | 20240416061533.921723-1-irogers@google.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Consistently prefer sysfs/json events | expand |
On Mon, Apr 15, 2024 at 11:15 PM Ian Rogers <irogers@google.com> wrote: > > As discussed in: > https://lore.kernel.org/lkml/20240217005738.3744121-1-atishp@rivosinc.com/ > preferring sysfs/json events consistently (with or without a given > PMU) will enable RISC-V's hope to customize legacy events in the perf > tool. > Thanks for remapping legacy events in a generic way. This looks great and got rid of my ugly arch specific way of remapping. Is there a good way for the driver (e.g via sysfs) to tell the perf tool whether to remap the legacy event or not ? In RISC-V the legacy systems without the new ISA extension may not want to remap if running the latest kernel. I described the problem in detail in the original thread as well. https://lore.kernel.org/lkml/63d73f09-84e5-49e1-99f5-60f414b22d70@rivosinc.com/ FWIW, for the entire series. Tested-by: Atish Patra <atishp@rivosinc.com> > Some minor clean-up is performed on the way. > > v2. Additional cleanup particularly adding better error messages. Fix > some line length issues on the earlier patches. > > Ian Rogers (16): > perf parse-events: Factor out '<event_or_pmu>/.../' parsing > perf parse-events: Directly pass PMU to parse_events_add_pmu > perf parse-events: Avoid copying an empty list > perf pmu: Refactor perf_pmu__match > perf tests parse-events: Use branches rather than cache-references > perf parse-events: Legacy cache names on all PMUs and lower priority > perf parse-events: Handle PE_TERM_HW in name_or_raw > perf parse-events: Constify parse_events_add_numeric > perf parse-events: Prefer sysfs/json hardware events over legacy > perf parse-events: Inline parse_events_update_lists > perf parse-events: Improve error message for bad numbers > perf parse-events: Inline parse_events_evlist_error > perf parse-events: Improvements to modifier parsing > perf parse-event: Constify event_symbol arrays > perf parse-events: Minor grouping tidy up > perf parse-events: Tidy the setting of the default event name > > tools/perf/tests/parse-events.c | 6 +- > tools/perf/util/parse-events.c | 482 ++++++++++++++++---------------- > tools/perf/util/parse-events.h | 49 ++-- > tools/perf/util/parse-events.l | 196 +++++++++---- > tools/perf/util/parse-events.y | 261 +++++++---------- > tools/perf/util/pmu.c | 27 +- > tools/perf/util/pmu.h | 2 +- > 7 files changed, 540 insertions(+), 483 deletions(-) > > -- > 2.44.0.683.g7961c838ac-goog >
On Tue, Apr 23, 2024 at 5:28 PM Atish Kumar Patra <atishp@rivosinc.com> wrote: > > On Mon, Apr 15, 2024 at 11:15 PM Ian Rogers <irogers@google.com> wrote: > > > > As discussed in: > > https://lore.kernel.org/lkml/20240217005738.3744121-1-atishp@rivosinc.com/ > > preferring sysfs/json events consistently (with or without a given > > PMU) will enable RISC-V's hope to customize legacy events in the perf > > tool. > > > > Thanks for remapping legacy events in a generic way. This looks great > and got rid of my > ugly arch specific way of remapping. Is there a good way for the > driver (e.g via sysfs) to tell the perf tool > whether to remap the legacy event or not ? > > In RISC-V the legacy systems without the new ISA extension may not > want to remap if running > the latest kernel. > > I described the problem in detail in the original thread as well. > https://lore.kernel.org/lkml/63d73f09-84e5-49e1-99f5-60f414b22d70@rivosinc.com/ So the sysfs/json events have priority over the legacy hardware events with this patch series. I'm not clear on your question but here are some scenarios: 1) for a vendor/model with a CPUID json files want to be used: 1.1) the driver shouldn't advertise the events /sys/devices/<pmu name>/events 1.2) the json in the perf tool needs to have a mapfile.csv entry for the cpuid to a model directory containing the event json. In the directory the legacy events should be defined. 2) for a vendor/model with a CPUID the driver files should be used: 2.1) the driver should advertise the events in /sys/devices/<pmu name>/events 2.2) in the json for the CPUID avoid redefining the events 3) for a vendor/model with a CPUID the legacy events should be used: 3.1) the driver shouldn't advertise the events in /sys/devices/<pmu name>/events 3.2) in the json for the CPUID avoid defining the events Are you asking to have both sysfs and json events for a model? In this case, which have priority over the other? It's possible in the pmu.c code to have a prioritized lookup either from json then sysfs or vice-versa, at the moment it is first come first served. To some extent this can be seen on Intel uncore events where there are both sysfs and json events with the same config, when we reverse map if the sysfs name is loaded then it is reverse mapped in verbose log or by perf trace, whilst typically I think the json name is reverse mapped. Are you asking for the search order to be configurable by the driver? In the past I've considered that the search order may be configured in the tool and the user may want to provide their own directory containing additional events and metrics. > FWIW, for the entire series. > Tested-by: Atish Patra <atishp@rivosinc.com> Thanks, I think we can go ahead to land this. Kan's comment was to ask for a follow up changing max_precise behavior and I'm hesitant to do two behavior changes in 1 patch series. Ian > > Some minor clean-up is performed on the way. > > > > v2. Additional cleanup particularly adding better error messages. Fix > > some line length issues on the earlier patches. > > > > Ian Rogers (16): > > perf parse-events: Factor out '<event_or_pmu>/.../' parsing > > perf parse-events: Directly pass PMU to parse_events_add_pmu > > perf parse-events: Avoid copying an empty list > > perf pmu: Refactor perf_pmu__match > > perf tests parse-events: Use branches rather than cache-references > > perf parse-events: Legacy cache names on all PMUs and lower priority > > perf parse-events: Handle PE_TERM_HW in name_or_raw > > perf parse-events: Constify parse_events_add_numeric > > perf parse-events: Prefer sysfs/json hardware events over legacy > > perf parse-events: Inline parse_events_update_lists > > perf parse-events: Improve error message for bad numbers > > perf parse-events: Inline parse_events_evlist_error > > perf parse-events: Improvements to modifier parsing > > perf parse-event: Constify event_symbol arrays > > perf parse-events: Minor grouping tidy up > > perf parse-events: Tidy the setting of the default event name > > > > tools/perf/tests/parse-events.c | 6 +- > > tools/perf/util/parse-events.c | 482 ++++++++++++++++---------------- > > tools/perf/util/parse-events.h | 49 ++-- > > tools/perf/util/parse-events.l | 196 +++++++++---- > > tools/perf/util/parse-events.y | 261 +++++++---------- > > tools/perf/util/pmu.c | 27 +- > > tools/perf/util/pmu.h | 2 +- > > 7 files changed, 540 insertions(+), 483 deletions(-) > > > > -- > > 2.44.0.683.g7961c838ac-goog > >
On 2024-04-16 2:15 a.m., Ian Rogers wrote: > As discussed in: > https://lore.kernel.org/lkml/20240217005738.3744121-1-atishp@rivosinc.com/ > preferring sysfs/json events consistently (with or without a given > PMU) will enable RISC-V's hope to customize legacy events in the perf > tool. > > Some minor clean-up is performed on the way. > > v2. Additional cleanup particularly adding better error messages. Fix > some line length issues on the earlier patches. > > Ian Rogers (16): > perf parse-events: Factor out '<event_or_pmu>/.../' parsing > perf parse-events: Directly pass PMU to parse_events_add_pmu > perf parse-events: Avoid copying an empty list > perf pmu: Refactor perf_pmu__match > perf tests parse-events: Use branches rather than cache-references > perf parse-events: Legacy cache names on all PMUs and lower priority > perf parse-events: Handle PE_TERM_HW in name_or_raw > perf parse-events: Constify parse_events_add_numeric > perf parse-events: Prefer sysfs/json hardware events over legacy > perf parse-events: Inline parse_events_update_lists > perf parse-events: Improve error message for bad numbers > perf parse-events: Inline parse_events_evlist_error > perf parse-events: Improvements to modifier parsing > perf parse-event: Constify event_symbol arrays > perf parse-events: Minor grouping tidy up > perf parse-events: Tidy the setting of the default event name > > tools/perf/tests/parse-events.c | 6 +- > tools/perf/util/parse-events.c | 482 ++++++++++++++++---------------- > tools/perf/util/parse-events.h | 49 ++-- > tools/perf/util/parse-events.l | 196 +++++++++---- > tools/perf/util/parse-events.y | 261 +++++++---------- > tools/perf/util/pmu.c | 27 +- > tools/perf/util/pmu.h | 2 +- > 7 files changed, 540 insertions(+), 483 deletions(-) > The series looks good to me. Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Thanks, Kan
As discussed in: https://lore.kernel.org/lkml/20240217005738.3744121-1-atishp@rivosinc.com/ preferring sysfs/json events consistently (with or without a given PMU) will enable RISC-V's hope to customize legacy events in the perf tool. Some minor clean-up is performed on the way. v2. Additional cleanup particularly adding better error messages. Fix some line length issues on the earlier patches. Ian Rogers (16): perf parse-events: Factor out '<event_or_pmu>/.../' parsing perf parse-events: Directly pass PMU to parse_events_add_pmu perf parse-events: Avoid copying an empty list perf pmu: Refactor perf_pmu__match perf tests parse-events: Use branches rather than cache-references perf parse-events: Legacy cache names on all PMUs and lower priority perf parse-events: Handle PE_TERM_HW in name_or_raw perf parse-events: Constify parse_events_add_numeric perf parse-events: Prefer sysfs/json hardware events over legacy perf parse-events: Inline parse_events_update_lists perf parse-events: Improve error message for bad numbers perf parse-events: Inline parse_events_evlist_error perf parse-events: Improvements to modifier parsing perf parse-event: Constify event_symbol arrays perf parse-events: Minor grouping tidy up perf parse-events: Tidy the setting of the default event name tools/perf/tests/parse-events.c | 6 +- tools/perf/util/parse-events.c | 482 ++++++++++++++++---------------- tools/perf/util/parse-events.h | 49 ++-- tools/perf/util/parse-events.l | 196 +++++++++---- tools/perf/util/parse-events.y | 261 +++++++---------- tools/perf/util/pmu.c | 27 +- tools/perf/util/pmu.h | 2 +- 7 files changed, 540 insertions(+), 483 deletions(-)