diff mbox series

[v7,5/5] clk: meson: c3: add c3 clock peripherals controller driver

Message ID 20240424050928.1997820-6-xianwei.zhao@amlogic.com (mailing list archive)
State Changes Requested, archived
Headers show
Series Add C3 SoC PLLs and Peripheral clock | expand

Commit Message

Xianwei Zhao April 24, 2024, 5:09 a.m. UTC 
Add the C3 peripherals clock controller driver in the C3 SoC family.

Co-developed-by: Chuan Liu <chuan.liu@amlogic.com>
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
 drivers/clk/meson/Kconfig          |   15 +
 drivers/clk/meson/Makefile         |    1 +
 drivers/clk/meson/c3-peripherals.c | 2366 ++++++++++++++++++++++++++++
 3 files changed, 2382 insertions(+)
 create mode 100644 drivers/clk/meson/c3-peripherals.c

Comments

Rob Herring April 24, 2024, 8:01 p.m. UTC | #1 
On Wed, Apr 24, 2024 at 01:09:28PM +0800, Xianwei Zhao wrote:
> Add the C3 peripherals clock controller driver in the C3 SoC family.
> 
> Co-developed-by: Chuan Liu <chuan.liu@amlogic.com>
> Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
>  drivers/clk/meson/Kconfig          |   15 +
>  drivers/clk/meson/Makefile         |    1 +
>  drivers/clk/meson/c3-peripherals.c | 2366 ++++++++++++++++++++++++++++
>  3 files changed, 2382 insertions(+)
>  create mode 100644 drivers/clk/meson/c3-peripherals.c
> 
> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
> index 9f975a980581..0b85d584910e 100644
> --- a/drivers/clk/meson/Kconfig
> +++ b/drivers/clk/meson/Kconfig
> @@ -142,6 +142,21 @@ config COMMON_CLK_C3_PLL
>  	  AKA C3. Say Y if you want the board to work, because PLLs are the parent
>  	  of most peripherals.
>  
> +config COMMON_CLK_C3_PERIPHERALS
> +	tristate "Amlogic C3 peripherals clock controller"
> +	depends on ARM64
> +	depends on ARM_SCMI_PROTOCOL

I may have missed it, but I don't see the dependency on SCMI in this 
driver.

> +	depends on COMMON_CLK_SCMI
> +	depends on COMMON_CLK_C3_PLL
> +	default y
> +	select COMMON_CLK_MESON_REGMAP
> +	select COMMON_CLK_MESON_DUALDIV
> +	select COMMON_CLK_MESON_CLKC_UTILS
> +	help
> +	  Support for the Peripherals clock controller on Amlogic C302X and
> +	  C308L devices, AKA C3. Say Y if you want the peripherals clock to
> +	  work.
> +
>  config COMMON_CLK_G12A
>  	tristate "G12 and SM1 SoC clock controllers support"
>  	depends on ARM64
> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> index 4420af628b31..20ad9482c892 100644
> --- a/drivers/clk/meson/Makefile
> +++ b/drivers/clk/meson/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
>  obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
>  obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
>  obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o
> +obj-$(CONFIG_COMMON_CLK_C3_PERIPHERALS) += c3-peripherals.o
>  obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
>  obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
>  obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
> diff --git a/drivers/clk/meson/c3-peripherals.c b/drivers/clk/meson/c3-peripherals.c
> new file mode 100644
> index 000000000000..0f834ced0ee9
> --- /dev/null
> +++ b/drivers/clk/meson/c3-peripherals.c
> @@ -0,0 +1,2366 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Amlogic C3 Peripherals Clock Controller Driver
> + *
> + * Copyright (c) 2023 Amlogic, inc.
> + * Author: Chuan Liu <chuan.liu@amlogic.com>
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/of_device.h>

I don't think you need this header.

> +#include <linux/platform_device.h>
> +#include "clk-regmap.h"
> +#include "clk-dualdiv.h"
> +#include "meson-clkc-utils.h"
> +#include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
Xianwei Zhao April 25, 2024, 6:28 a.m. UTC | #2 
Hi Rob,
    Thanks for your review.

On 2024/4/25 04:01, Rob Herring wrote:
> [ EXTERNAL EMAIL ]
> 
> On Wed, Apr 24, 2024 at 01:09:28PM +0800, Xianwei Zhao wrote:
>> Add the C3 peripherals clock controller driver in the C3 SoC family.
>>
>> Co-developed-by: Chuan Liu <chuan.liu@amlogic.com>
>> Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>> ---
>>   drivers/clk/meson/Kconfig          |   15 +
>>   drivers/clk/meson/Makefile         |    1 +
>>   drivers/clk/meson/c3-peripherals.c | 2366 ++++++++++++++++++++++++++++
>>   3 files changed, 2382 insertions(+)
>>   create mode 100644 drivers/clk/meson/c3-peripherals.c
>>
>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>> index 9f975a980581..0b85d584910e 100644
>> --- a/drivers/clk/meson/Kconfig
>> +++ b/drivers/clk/meson/Kconfig
>> @@ -142,6 +142,21 @@ config COMMON_CLK_C3_PLL
>>          AKA C3. Say Y if you want the board to work, because PLLs are the parent
>>          of most peripherals.
>>
>> +config COMMON_CLK_C3_PERIPHERALS
>> +     tristate "Amlogic C3 peripherals clock controller"
>> +     depends on ARM64
>> +     depends on ARM_SCMI_PROTOCOL
> 
> I may have missed it, but I don't see the dependency on SCMI in this
> driver.
> 

Some clock sources for peripherals controller from SCMI module.
In previous version, Jerome suggest us the clock  that relevant 
registers can only be accessed securely is implemented through SCMI.

>> +     depends on COMMON_CLK_SCMI
>> +     depends on COMMON_CLK_C3_PLL
>> +     default y
>> +     select COMMON_CLK_MESON_REGMAP
>> +     select COMMON_CLK_MESON_DUALDIV
>> +     select COMMON_CLK_MESON_CLKC_UTILS
>> +     help
>> +       Support for the Peripherals clock controller on Amlogic C302X and
>> +       C308L devices, AKA C3. Say Y if you want the peripherals clock to
>> +       work.
>> +
>>   config COMMON_CLK_G12A
>>        tristate "G12 and SM1 SoC clock controllers support"
>>        depends on ARM64
>> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>> index 4420af628b31..20ad9482c892 100644
>> --- a/drivers/clk/meson/Makefile
>> +++ b/drivers/clk/meson/Makefile
>> @@ -20,6 +20,7 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
>>   obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
>>   obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
>>   obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o
>> +obj-$(CONFIG_COMMON_CLK_C3_PERIPHERALS) += c3-peripherals.o
>>   obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
>>   obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
>>   obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
>> diff --git a/drivers/clk/meson/c3-peripherals.c b/drivers/clk/meson/c3-peripherals.c
>> new file mode 100644
>> index 000000000000..0f834ced0ee9
>> --- /dev/null
>> +++ b/drivers/clk/meson/c3-peripherals.c
>> @@ -0,0 +1,2366 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Amlogic C3 Peripherals Clock Controller Driver
>> + *
>> + * Copyright (c) 2023 Amlogic, inc.
>> + * Author: Chuan Liu <chuan.liu@amlogic.com>
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/of_device.h>
> 
> I don't think you need this header.
> 

Yes, I will fix it with c3-pll.c.

>> +#include <linux/platform_device.h>
>> +#include "clk-regmap.h"
>> +#include "clk-dualdiv.h"
>> +#include "meson-clkc-utils.h"
>> +#include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
Jerome Brunet May 3, 2024, 12:16 p.m. UTC | #3 
On Thu 25 Apr 2024 at 14:28, Xianwei Zhao <xianwei.zhao@amlogic.com> wrote:

> Hi Rob,
>    Thanks for your review.
>
> On 2024/4/25 04:01, Rob Herring wrote:
>> [ EXTERNAL EMAIL ]
>> On Wed, Apr 24, 2024 at 01:09:28PM +0800, Xianwei Zhao wrote:
>>> Add the C3 peripherals clock controller driver in the C3 SoC family.
>>>
>>> Co-developed-by: Chuan Liu <chuan.liu@amlogic.com>
>>> Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
>>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>>> ---
>>>   drivers/clk/meson/Kconfig          |   15 +
>>>   drivers/clk/meson/Makefile         |    1 +
>>>   drivers/clk/meson/c3-peripherals.c | 2366 ++++++++++++++++++++++++++++
>>>   3 files changed, 2382 insertions(+)
>>>   create mode 100644 drivers/clk/meson/c3-peripherals.c
>>>
>>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>>> index 9f975a980581..0b85d584910e 100644
>>> --- a/drivers/clk/meson/Kconfig
>>> +++ b/drivers/clk/meson/Kconfig
>>> @@ -142,6 +142,21 @@ config COMMON_CLK_C3_PLL
>>>          AKA C3. Say Y if you want the board to work, because PLLs are the parent
>>>          of most peripherals.
>>>
>>> +config COMMON_CLK_C3_PERIPHERALS
>>> +     tristate "Amlogic C3 peripherals clock controller"
>>> +     depends on ARM64
>>> +     depends on ARM_SCMI_PROTOCOL
>> I may have missed it, but I don't see the dependency on SCMI in this
>> driver.
>> 
>
> Some clock sources for peripherals controller from SCMI module.
> In previous version, Jerome suggest us the clock  that relevant registers
> can only be accessed securely is implemented through SCMI.
>

There is no dependency but you are guranteed to have have problem if
SCMI is missing because it provides several inputs to this controller.

IMO, this controller should 'imply ARM_SCMI_PROTOCOL'

You have already posted a v8 without it.
I expect a fix up change on top of v8 if there is no other comment on
this v8 version. Part of v9 otherwise.

>>> +     depends on COMMON_CLK_SCMI
>>> +     depends on COMMON_CLK_C3_PLL
>>> +     default y
>>> +     select COMMON_CLK_MESON_REGMAP
>>> +     select COMMON_CLK_MESON_DUALDIV
>>> +     select COMMON_CLK_MESON_CLKC_UTILS
>>> +     help
>>> +       Support for the Peripherals clock controller on Amlogic C302X and
>>> +       C308L devices, AKA C3. Say Y if you want the peripherals clock to
>>> +       work.
>>> +
>>>   config COMMON_CLK_G12A
>>>        tristate "G12 and SM1 SoC clock controllers support"
>>>        depends on ARM64
>>> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>>> index 4420af628b31..20ad9482c892 100644
>>> --- a/drivers/clk/meson/Makefile
>>> +++ b/drivers/clk/meson/Makefile
>>> @@ -20,6 +20,7 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
>>>   obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
>>>   obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
>>>   obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o
>>> +obj-$(CONFIG_COMMON_CLK_C3_PERIPHERALS) += c3-peripherals.o
>>>   obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
>>>   obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
>>>   obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
>>> diff --git a/drivers/clk/meson/c3-peripherals.c b/drivers/clk/meson/c3-peripherals.c
>>> new file mode 100644
>>> index 000000000000..0f834ced0ee9
>>> --- /dev/null
>>> +++ b/drivers/clk/meson/c3-peripherals.c
>>> @@ -0,0 +1,2366 @@
>>> +// SPDX-License-Identifier: GPL-2.0-only
>>> +/*
>>> + * Amlogic C3 Peripherals Clock Controller Driver
>>> + *
>>> + * Copyright (c) 2023 Amlogic, inc.
>>> + * Author: Chuan Liu <chuan.liu@amlogic.com>
>>> + */
>>> +
>>> +#include <linux/clk-provider.h>
>>> +#include <linux/of_device.h>
>> I don't think you need this header.
>> 
>
> Yes, I will fix it with c3-pll.c.
>
>>> +#include <linux/platform_device.h>
>>> +#include "clk-regmap.h"
>>> +#include "clk-dualdiv.h"
>>> +#include "meson-clkc-utils.h"
>>> +#include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
Jerome Brunet May 3, 2024, 12:20 p.m. UTC | #4 
On Fri 03 May 2024 at 14:16, Jerome Brunet <jbrunet@baylibre.com> wrote:

> On Thu 25 Apr 2024 at 14:28, Xianwei Zhao <xianwei.zhao@amlogic.com> wrote:
>
>> Hi Rob,
>>    Thanks for your review.
>>
>> On 2024/4/25 04:01, Rob Herring wrote:
>>> [ EXTERNAL EMAIL ]
>>> On Wed, Apr 24, 2024 at 01:09:28PM +0800, Xianwei Zhao wrote:
>>>> Add the C3 peripherals clock controller driver in the C3 SoC family.
>>>>
>>>> Co-developed-by: Chuan Liu <chuan.liu@amlogic.com>
>>>> Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
>>>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>>>> ---
>>>>   drivers/clk/meson/Kconfig          |   15 +
>>>>   drivers/clk/meson/Makefile         |    1 +
>>>>   drivers/clk/meson/c3-peripherals.c | 2366 ++++++++++++++++++++++++++++
>>>>   3 files changed, 2382 insertions(+)
>>>>   create mode 100644 drivers/clk/meson/c3-peripherals.c
>>>>
>>>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>>>> index 9f975a980581..0b85d584910e 100644
>>>> --- a/drivers/clk/meson/Kconfig
>>>> +++ b/drivers/clk/meson/Kconfig
>>>> @@ -142,6 +142,21 @@ config COMMON_CLK_C3_PLL
>>>>          AKA C3. Say Y if you want the board to work, because PLLs are the parent
>>>>          of most peripherals.
>>>>
>>>> +config COMMON_CLK_C3_PERIPHERALS
>>>> +     tristate "Amlogic C3 peripherals clock controller"
>>>> +     depends on ARM64
>>>> +     depends on ARM_SCMI_PROTOCOL
>>> I may have missed it, but I don't see the dependency on SCMI in this
>>> driver.
>>> 
>>
>> Some clock sources for peripherals controller from SCMI module.
>> In previous version, Jerome suggest us the clock  that relevant registers
>> can only be accessed securely is implemented through SCMI.
>>
>
> There is no dependency but you are guranteed to have have problem if
> SCMI is missing because it provides several inputs to this controller.
>
> IMO, this controller should 'imply ARM_SCMI_PROTOCOL'
>
> You have already posted a v8 without it.
> I expect a fix up change on top of v8 if there is no other comment on
> this v8 version. Part of v9 otherwise.
>
>>>> +     depends on COMMON_CLK_SCMI
>>>> +     depends on COMMON_CLK_C3_PLL

Same here - imply, not depends

>>>> +     default y
>>>> +     select COMMON_CLK_MESON_REGMAP
>>>> +     select COMMON_CLK_MESON_DUALDIV
>>>> +     select COMMON_CLK_MESON_CLKC_UTILS
>>>> +     help
>>>> +       Support for the Peripherals clock controller on Amlogic C302X and
>>>> +       C308L devices, AKA C3. Say Y if you want the peripherals clock to
>>>> +       work.
>>>> +
>>>>   config COMMON_CLK_G12A
>>>>        tristate "G12 and SM1 SoC clock controllers support"
>>>>        depends on ARM64
>>>> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>>>> index 4420af628b31..20ad9482c892 100644
>>>> --- a/drivers/clk/meson/Makefile
>>>> +++ b/drivers/clk/meson/Makefile
>>>> @@ -20,6 +20,7 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
>>>>   obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
>>>>   obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
>>>>   obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o
>>>> +obj-$(CONFIG_COMMON_CLK_C3_PERIPHERALS) += c3-peripherals.o
>>>>   obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
>>>>   obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
>>>>   obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
>>>> diff --git a/drivers/clk/meson/c3-peripherals.c b/drivers/clk/meson/c3-peripherals.c
>>>> new file mode 100644
>>>> index 000000000000..0f834ced0ee9
>>>> --- /dev/null
>>>> +++ b/drivers/clk/meson/c3-peripherals.c
>>>> @@ -0,0 +1,2366 @@
>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>> +/*
>>>> + * Amlogic C3 Peripherals Clock Controller Driver
>>>> + *
>>>> + * Copyright (c) 2023 Amlogic, inc.
>>>> + * Author: Chuan Liu <chuan.liu@amlogic.com>
>>>> + */
>>>> +
>>>> +#include <linux/clk-provider.h>
>>>> +#include <linux/of_device.h>
>>> I don't think you need this header.
>>> 
>>
>> Yes, I will fix it with c3-pll.c.
>>
>>>> +#include <linux/platform_device.h>
>>>> +#include "clk-regmap.h"
>>>> +#include "clk-dualdiv.h"
>>>> +#include "meson-clkc-utils.h"
>>>> +#include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
diff mbox series

Patch

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 9f975a980581..0b85d584910e 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -142,6 +142,21 @@  config COMMON_CLK_C3_PLL
 	  AKA C3. Say Y if you want the board to work, because PLLs are the parent
 	  of most peripherals.
 
+config COMMON_CLK_C3_PERIPHERALS
+	tristate "Amlogic C3 peripherals clock controller"
+	depends on ARM64
+	depends on ARM_SCMI_PROTOCOL
+	depends on COMMON_CLK_SCMI
+	depends on COMMON_CLK_C3_PLL
+	default y
+	select COMMON_CLK_MESON_REGMAP
+	select COMMON_CLK_MESON_DUALDIV
+	select COMMON_CLK_MESON_CLKC_UTILS
+	help
+	  Support for the Peripherals clock controller on Amlogic C302X and
+	  C308L devices, AKA C3. Say Y if you want the peripherals clock to
+	  work.
+
 config COMMON_CLK_G12A
 	tristate "G12 and SM1 SoC clock controllers support"
 	depends on ARM64
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 4420af628b31..20ad9482c892 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -20,6 +20,7 @@  obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
 obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
 obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
 obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o
+obj-$(CONFIG_COMMON_CLK_C3_PERIPHERALS) += c3-peripherals.o
 obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
 obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
 obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
diff --git a/drivers/clk/meson/c3-peripherals.c b/drivers/clk/meson/c3-peripherals.c
new file mode 100644
index 000000000000..0f834ced0ee9
--- /dev/null
+++ b/drivers/clk/meson/c3-peripherals.c
@@ -0,0 +1,2366 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Amlogic C3 Peripherals Clock Controller Driver
+ *
+ * Copyright (c) 2023 Amlogic, inc.
+ * Author: Chuan Liu <chuan.liu@amlogic.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "clk-regmap.h"
+#include "clk-dualdiv.h"
+#include "meson-clkc-utils.h"
+#include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
+
+#define RTC_BY_OSCIN_CTRL0			0x8
+#define RTC_BY_OSCIN_CTRL1			0xc
+#define RTC_CTRL				0x10
+#define SYS_CLK_EN0_REG0			0x44
+#define SYS_CLK_EN0_REG1			0x48
+#define SYS_CLK_EN0_REG2			0x4c
+#define CLK12_24_CTRL				0xa8
+#define AXI_CLK_EN0				0xac
+#define VDIN_MEAS_CLK_CTRL			0xf8
+#define VAPB_CLK_CTRL				0xfc
+#define MIPIDSI_PHY_CLK_CTRL			0x104
+#define GE2D_CLK_CTRL				0x10c
+#define ISP0_CLK_CTRL				0x110
+#define DEWARPA_CLK_CTRL			0x114
+#define VOUTENC_CLK_CTRL			0x118
+#define VDEC_CLK_CTRL				0x140
+#define VDEC3_CLK_CTRL				0x148
+#define TS_CLK_CTRL				0x158
+#define ETH_CLK_CTRL				0x164
+#define NAND_CLK_CTRL				0x168
+#define SD_EMMC_CLK_CTRL			0x16c
+#define SPICC_CLK_CTRL				0x174
+#define GEN_CLK_CTRL				0x178
+#define SAR_CLK_CTRL0				0x17c
+#define PWM_CLK_AB_CTRL				0x180
+#define PWM_CLK_CD_CTRL				0x184
+#define PWM_CLK_EF_CTRL				0x188
+#define PWM_CLK_GH_CTRL				0x18c
+#define PWM_CLK_IJ_CTRL				0x190
+#define PWM_CLK_KL_CTRL				0x194
+#define PWM_CLK_MN_CTRL				0x198
+#define VC9000E_CLK_CTRL			0x19c
+#define SPIFC_CLK_CTRL				0x1a0
+#define NNA_CLK_CTRL				0x220
+
+static struct clk_regmap rtc_xtal_clkin = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = RTC_BY_OSCIN_CTRL0,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "rtc_xtal_clkin",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "oscin",
+		},
+		.num_parents = 1,
+	},
+};
+
+static const struct meson_clk_dualdiv_param rtc_32k_div_table[] = {
+	{ 733, 732, 8, 11, 1 },
+	{ /* sentinel */ }
+};
+
+static struct clk_regmap rtc_32k_div = {
+	.data = &(struct meson_clk_dualdiv_data) {
+		.n1 = {
+			.reg_off = RTC_BY_OSCIN_CTRL0,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.n2 = {
+			.reg_off = RTC_BY_OSCIN_CTRL0,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.m1 = {
+			.reg_off = RTC_BY_OSCIN_CTRL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.m2 = {
+			.reg_off = RTC_BY_OSCIN_CTRL1,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.dual = {
+			.reg_off = RTC_BY_OSCIN_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.table = rtc_32k_div_table,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "rtc_32k_div",
+		.ops = &meson_clk_dualdiv_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_xtal_clkin.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static const struct clk_parent_data rtc_32k_mux_parent_data[] = {
+	{ .hw = &rtc_32k_div.hw },
+	{ .hw = &rtc_xtal_clkin.hw }
+};
+
+static struct clk_regmap rtc_32k_mux = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = RTC_BY_OSCIN_CTRL1,
+		.mask = 0x1,
+		.shift = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "rtc_32k_mux",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = rtc_32k_mux_parent_data,
+		.num_parents = ARRAY_SIZE(rtc_32k_mux_parent_data),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap rtc_32k = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = RTC_BY_OSCIN_CTRL0,
+		.bit_idx = 30,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "rtc_32k",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_mux.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data rtc_clk_mux_parent_data[] = {
+	{ .fw_name = "oscin" },
+	{ .hw = &rtc_32k.hw },
+	{ .fw_name = "pad_osc" }
+};
+
+static struct clk_regmap rtc_clk = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = RTC_CTRL,
+		.mask = 0x3,
+		.shift = 0,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "rtc_clk",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = rtc_clk_mux_parent_data,
+		.num_parents = ARRAY_SIZE(rtc_clk_mux_parent_data),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+#define C3_CLK_GATE(_name, _reg, _bit, _fw_name, _ops, _flags)		\
+struct clk_regmap _name = {						\
+	.data = &(struct clk_regmap_gate_data){				\
+		.offset = (_reg),					\
+		.bit_idx = (_bit),					\
+	},								\
+	.hw.init = &(struct clk_init_data) {				\
+		.name = #_name,						\
+		.ops = _ops,						\
+		.parent_data = &(const struct clk_parent_data) {	\
+			.fw_name = #_fw_name,				\
+		},							\
+		.num_parents = 1,					\
+		.flags = (_flags),					\
+	},								\
+}
+
+#define C3_SYS_GATE(_name, _reg, _bit, _flags)				\
+	C3_CLK_GATE(_name, _reg, _bit, sysclk,				\
+		    &clk_regmap_gate_ops, _flags)
+
+#define C3_SYS_GATE_RO(_name, _reg, _bit)				\
+	C3_CLK_GATE(_name, _reg, _bit, sysclk,				\
+		    &clk_regmap_gate_ro_ops, 0)
+
+static C3_SYS_GATE(sys_reset_ctrl,	SYS_CLK_EN0_REG0, 1, 0);
+static C3_SYS_GATE(sys_pwr_ctrl,	SYS_CLK_EN0_REG0, 3, 0);
+static C3_SYS_GATE(sys_pad_ctrl,	SYS_CLK_EN0_REG0, 4, 0);
+static C3_SYS_GATE(sys_ctrl,		SYS_CLK_EN0_REG0, 5, 0);
+static C3_SYS_GATE(sys_ts_pll,		SYS_CLK_EN0_REG0, 6, 0);
+
+/*
+ * NOTE: sys_dev_arb provides the clock to the ETH and SPICC arbiters that
+ * access the AXI bus.
+ */
+static C3_SYS_GATE(sys_dev_arb,		SYS_CLK_EN0_REG0, 7, 0);
+
+/*
+ * FIXME: sys_mmc_pclk provides the clock for the DDR PHY, DDR will only be
+ * initialized in bl2, and this clock should not be touched in linux.
+ */
+static C3_SYS_GATE_RO(sys_mmc_pclk,	SYS_CLK_EN0_REG0, 8);
+
+/*
+ * NOTE: sys_cpu_ctrl provides the clock for CPU controller. After clock is
+ * disabled, cpu_clk and other key CPU-related configurations cannot take effect.
+ */
+static C3_SYS_GATE(sys_cpu_ctrl,	SYS_CLK_EN0_REG0, 11, CLK_IS_CRITICAL);
+static C3_SYS_GATE(sys_jtag_ctrl,	SYS_CLK_EN0_REG0, 12, 0);
+static C3_SYS_GATE(sys_ir_ctrl,		SYS_CLK_EN0_REG0, 13, 0);
+
+/*
+ * NOTE: sys_irq_ctrl provides the clock for IRQ controller. The IRQ controller
+ * collects and distributes the interrupt signal to the GIC, PWR_CTRL, and
+ * AOCPU. If the clock is disabled, interrupt-related functions will occurs an
+ * exception.
+ */
+static C3_SYS_GATE(sys_irq_ctrl,	SYS_CLK_EN0_REG0, 14, CLK_IS_CRITICAL);
+static C3_SYS_GATE(sys_msr_clk,		SYS_CLK_EN0_REG0, 15, 0);
+static C3_SYS_GATE(sys_rom,		SYS_CLK_EN0_REG0, 16, 0);
+static C3_SYS_GATE(sys_uart_f,		SYS_CLK_EN0_REG0, 17, 0);
+static C3_SYS_GATE(sys_cpu_apb,		SYS_CLK_EN0_REG0, 18, 0);
+static C3_SYS_GATE(sys_rsa,		SYS_CLK_EN0_REG0, 19, 0);
+static C3_SYS_GATE(sys_sar_adc,		SYS_CLK_EN0_REG0, 20, 0);
+static C3_SYS_GATE(sys_startup,		SYS_CLK_EN0_REG0, 21, 0);
+static C3_SYS_GATE(sys_secure,		SYS_CLK_EN0_REG0, 22, 0);
+static C3_SYS_GATE(sys_spifc,		SYS_CLK_EN0_REG0, 23, 0);
+static C3_SYS_GATE(sys_nna,		SYS_CLK_EN0_REG0, 25, 0);
+static C3_SYS_GATE(sys_eth_mac,		SYS_CLK_EN0_REG0, 26, 0);
+
+/*
+ * FIXME: sys_gic provides the clock for GIC(Generic Interrupt Controller).
+ * After clock is disabled, The GIC cannot work properly. At present, the driver
+ * used by our GIC is the public driver in kernel, and there is no management
+ * clock in the driver.
+ */
+static C3_SYS_GATE(sys_gic,		SYS_CLK_EN0_REG0, 27, CLK_IS_CRITICAL);
+static C3_SYS_GATE(sys_rama,		SYS_CLK_EN0_REG0, 28, 0);
+
+/*
+ * NOTE: sys_big_nic provides the clock to the control bus of the NIC(Network
+ * Interface Controller) between multiple devices(CPU, DDR, RAM, ROM, GIC,
+ * SPIFC, CAPU, JTAG, EMMC, SDIO, sec_top, USB, Audio, ETH, SPICC) in the
+ * system. After clock is disabled, The NIC cannot work.
+ */
+static C3_SYS_GATE(sys_big_nic,		SYS_CLK_EN0_REG0, 29, CLK_IS_CRITICAL);
+static C3_SYS_GATE(sys_ramb,		SYS_CLK_EN0_REG0, 30, 0);
+static C3_SYS_GATE(sys_audio_pclk,	SYS_CLK_EN0_REG0, 31, 0);
+static C3_SYS_GATE(sys_pwm_kl,		SYS_CLK_EN0_REG1, 0, 0);
+static C3_SYS_GATE(sys_pwm_ij,		SYS_CLK_EN0_REG1, 1, 0);
+static C3_SYS_GATE(sys_usb,		SYS_CLK_EN0_REG1, 2, 0);
+static C3_SYS_GATE(sys_sd_emmc_a,	SYS_CLK_EN0_REG1, 3, 0);
+static C3_SYS_GATE(sys_sd_emmc_c,	SYS_CLK_EN0_REG1, 4, 0);
+static C3_SYS_GATE(sys_pwm_ab,		SYS_CLK_EN0_REG1, 5, 0);
+static C3_SYS_GATE(sys_pwm_cd,		SYS_CLK_EN0_REG1, 6, 0);
+static C3_SYS_GATE(sys_pwm_ef,		SYS_CLK_EN0_REG1, 7, 0);
+static C3_SYS_GATE(sys_pwm_gh,		SYS_CLK_EN0_REG1, 8, 0);
+static C3_SYS_GATE(sys_spicc_1,		SYS_CLK_EN0_REG1, 9, 0);
+static C3_SYS_GATE(sys_spicc_0,		SYS_CLK_EN0_REG1, 10, 0);
+static C3_SYS_GATE(sys_uart_a,		SYS_CLK_EN0_REG1, 11, 0);
+static C3_SYS_GATE(sys_uart_b,		SYS_CLK_EN0_REG1, 12, 0);
+static C3_SYS_GATE(sys_uart_c,		SYS_CLK_EN0_REG1, 13, 0);
+static C3_SYS_GATE(sys_uart_d,		SYS_CLK_EN0_REG1, 14, 0);
+static C3_SYS_GATE(sys_uart_e,		SYS_CLK_EN0_REG1, 15, 0);
+static C3_SYS_GATE(sys_i2c_m_a,		SYS_CLK_EN0_REG1, 16, 0);
+static C3_SYS_GATE(sys_i2c_m_b,		SYS_CLK_EN0_REG1, 17, 0);
+static C3_SYS_GATE(sys_i2c_m_c,		SYS_CLK_EN0_REG1, 18, 0);
+static C3_SYS_GATE(sys_i2c_m_d,		SYS_CLK_EN0_REG1, 19, 0);
+static C3_SYS_GATE(sys_i2c_s_a,		SYS_CLK_EN0_REG1, 20, 0);
+static C3_SYS_GATE(sys_rtc,		SYS_CLK_EN0_REG1, 21, 0);
+static C3_SYS_GATE(sys_ge2d,		SYS_CLK_EN0_REG1, 22, 0);
+static C3_SYS_GATE(sys_isp,		SYS_CLK_EN0_REG1, 23, 0);
+static C3_SYS_GATE(sys_gpv_isp_nic,	SYS_CLK_EN0_REG1, 24, 0);
+static C3_SYS_GATE(sys_gpv_cve_nic,	SYS_CLK_EN0_REG1, 25, 0);
+static C3_SYS_GATE(sys_mipi_dsi_host,	SYS_CLK_EN0_REG1, 26, 0);
+static C3_SYS_GATE(sys_mipi_dsi_phy,	SYS_CLK_EN0_REG1, 27, 0);
+static C3_SYS_GATE(sys_eth_phy,		SYS_CLK_EN0_REG1, 28, 0);
+static C3_SYS_GATE(sys_acodec,		SYS_CLK_EN0_REG1, 29, 0);
+static C3_SYS_GATE(sys_dwap,		SYS_CLK_EN0_REG1, 30, 0);
+static C3_SYS_GATE(sys_dos,		SYS_CLK_EN0_REG1, 31, 0);
+static C3_SYS_GATE(sys_cve,		SYS_CLK_EN0_REG2, 0, 0);
+static C3_SYS_GATE(sys_vout,		SYS_CLK_EN0_REG2, 1, 0);
+static C3_SYS_GATE(sys_vc9000e,		SYS_CLK_EN0_REG2, 2, 0);
+static C3_SYS_GATE(sys_pwm_mn,		SYS_CLK_EN0_REG2, 3, 0);
+static C3_SYS_GATE(sys_sd_emmc_b,	SYS_CLK_EN0_REG2, 4, 0);
+
+#define C3_AXI_GATE(_name, _reg, _bit, _flags)				\
+	C3_CLK_GATE(_name, _reg, _bit, axiclk,				\
+		    &clk_regmap_gate_ops, _flags)
+
+/*
+ * NOTE: axi_sys_nic provides the clock to the AXI bus of the system NIC. After
+ * clock is disabled, The NIC cannot work.
+ */
+static C3_AXI_GATE(axi_sys_nic,		AXI_CLK_EN0, 2, CLK_IS_CRITICAL);
+static C3_AXI_GATE(axi_isp_nic,		AXI_CLK_EN0, 3, 0);
+static C3_AXI_GATE(axi_cve_nic,		AXI_CLK_EN0, 4, 0);
+static C3_AXI_GATE(axi_ramb,		AXI_CLK_EN0, 5, 0);
+static C3_AXI_GATE(axi_rama,		AXI_CLK_EN0, 6, 0);
+
+/*
+ * NOTE: axi_cpu_dmc provides the clock to the AXI bus where the CPU accesses
+ * the DDR. After clock is disabled, The CPU will not have access to the DDR.
+ */
+static C3_AXI_GATE(axi_cpu_dmc,		AXI_CLK_EN0, 7, CLK_IS_CRITICAL);
+static C3_AXI_GATE(axi_nic,		AXI_CLK_EN0, 8, 0);
+static C3_AXI_GATE(axi_dma,		AXI_CLK_EN0, 9, 0);
+
+/*
+ * NOTE: axi_mux_nic provides the clock to the NIC's AXI bus for NN(Neural
+ * Network) and other devices(CPU, EMMC, SDIO, sec_top, USB, Audio, ETH, SPICC)
+ * to access RAM space.
+ */
+static C3_AXI_GATE(axi_mux_nic,		AXI_CLK_EN0, 10, 0);
+static C3_AXI_GATE(axi_cve,		AXI_CLK_EN0, 12, 0);
+
+/*
+ * NOTE: axi_dev1_dmc provides the clock for the peripherals(EMMC, SDIO,
+ * sec_top, USB, Audio, ETH, SPICC) to access the AXI bus of the DDR.
+ */
+static C3_AXI_GATE(axi_dev1_dmc,	AXI_CLK_EN0, 13, 0);
+static C3_AXI_GATE(axi_dev0_dmc,	AXI_CLK_EN0, 14, 0);
+static C3_AXI_GATE(axi_dsp_dmc,		AXI_CLK_EN0, 15, 0);
+
+/*
+ * clk_12_24m model
+ *
+ *          |------|     |-----| clk_12m_24m |-----|
+ * xtal---->| gate |---->| div |------------>| pad |
+ *          |------|     |-----|             |-----|
+ */
+static struct clk_regmap clk_12_24m_in = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = CLK12_24_CTRL,
+		.bit_idx = 11,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "clk_12_24m_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal_24m",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap clk_12_24m = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = CLK12_24_CTRL,
+		.shift = 10,
+		.width = 1,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "clk_12_24m",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&clk_12_24m_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+/* Fix me: set value 0 will div by 2 like value 1 */
+static struct clk_regmap fclk_25m_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = CLK12_24_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "fclk_25m_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "fix",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap fclk_25m = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = CLK12_24_CTRL,
+		.bit_idx = 12,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "fclk_25m",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&fclk_25m_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/*
+ * Channel 3(ddr_dpll_pt_clk) is manged by the DDR module; channel 12(cts_msr_clk)
+ * is manged by clock measures module. Their hardware are out of clock tree.
+ * Channel 4 8 9 10 11 13 14 15 16 18 are not connected.
+ */
+static u32 gen_parent_table[] = { 0, 1, 2, 5, 6, 7, 17, 19, 20, 21, 22, 23, 24};
+
+static const struct clk_parent_data gen_parent_data[] = {
+	{ .fw_name = "oscin" },
+	{ .hw = &rtc_clk.hw },
+	{ .fw_name = "sysplldiv16" },
+	{ .fw_name = "gp0" },
+	{ .fw_name = "gp1" },
+	{ .fw_name = "hifi" },
+	{ .fw_name = "cpudiv16" },
+	{ .fw_name = "fdiv2" },
+	{ .fw_name = "fdiv2p5" },
+	{ .fw_name = "fdiv3" },
+	{ .fw_name = "fdiv4" },
+	{ .fw_name = "fdiv5" },
+	{ .fw_name = "fdiv7" }
+};
+
+static struct clk_regmap gen_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = GEN_CLK_CTRL,
+		.mask = 0x1f,
+		.shift = 12,
+		.table = gen_parent_table,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "gen_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = gen_parent_data,
+		.num_parents = ARRAY_SIZE(gen_parent_data),
+	},
+};
+
+static struct clk_regmap gen_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = GEN_CLK_CTRL,
+		.shift = 0,
+		.width = 11,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "gen_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&gen_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap gen = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = GEN_CLK_CTRL,
+		.bit_idx = 11,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "gen",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&gen_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data saradc_parent_data[] = {
+	{ .fw_name = "oscin" },
+	{ .fw_name = "sysclk" }
+};
+
+static struct clk_regmap saradc_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = SAR_CLK_CTRL0,
+		.mask = 0x1,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "saradc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = saradc_parent_data,
+		.num_parents = ARRAY_SIZE(saradc_parent_data),
+	},
+};
+
+static struct clk_regmap saradc_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = SAR_CLK_CTRL0,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "saradc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&saradc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap saradc = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = SAR_CLK_CTRL0,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "saradc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&saradc_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data pwm_parent_data[] = {
+	{ .fw_name = "oscin" },
+	{ .fw_name = "gp1" },
+	{ .fw_name = "fdiv4" },
+	{ .fw_name = "fdiv3" }
+};
+
+#define AML_PWM_CLK_MUX(_name, _reg, _shift) {			\
+	.data = &(struct clk_regmap_mux_data) {			\
+		.offset = _reg,					\
+		.mask = 0x3,					\
+		.shift = _shift,				\
+	},							\
+	.hw.init = &(struct clk_init_data) {			\
+		.name = #_name "_sel",				\
+		.ops = &clk_regmap_mux_ops,			\
+		.parent_data = pwm_parent_data,			\
+		.num_parents = ARRAY_SIZE(pwm_parent_data),	\
+	},							\
+}
+
+#define AML_PWM_CLK_DIV(_name, _reg, _shift) {			\
+	.data = &(struct clk_regmap_div_data) {			\
+		.offset = _reg,					\
+		.shift = _shift,				\
+		.width = 8,					\
+	},							\
+	.hw.init = &(struct clk_init_data) {			\
+		.name = #_name "_div",				\
+		.ops = &clk_regmap_divider_ops,			\
+		.parent_names = (const char *[]) { #_name "_sel" },\
+		.num_parents = 1,				\
+		.flags = CLK_SET_RATE_PARENT,			\
+	},							\
+}
+
+#define AML_PWM_CLK_GATE(_name, _reg, _bit) {			\
+	.data = &(struct clk_regmap_gate_data) {		\
+		.offset = _reg,					\
+		.bit_idx = _bit,				\
+	},							\
+	.hw.init = &(struct clk_init_data) {			\
+		.name = #_name,					\
+		.ops = &clk_regmap_gate_ops,			\
+		.parent_names = (const char *[]) { #_name "_div" },\
+		.num_parents = 1,				\
+		.flags = CLK_SET_RATE_PARENT,			\
+	},							\
+}
+
+static struct clk_regmap pwm_a_sel =
+	AML_PWM_CLK_MUX(pwm_a, PWM_CLK_AB_CTRL, 9);
+static struct clk_regmap pwm_a_div =
+	AML_PWM_CLK_DIV(pwm_a, PWM_CLK_AB_CTRL, 0);
+static struct clk_regmap pwm_a =
+	AML_PWM_CLK_GATE(pwm_a, PWM_CLK_AB_CTRL, 8);
+
+static struct clk_regmap pwm_b_sel =
+	AML_PWM_CLK_MUX(pwm_b, PWM_CLK_AB_CTRL, 25);
+static struct clk_regmap pwm_b_div =
+	AML_PWM_CLK_DIV(pwm_b, PWM_CLK_AB_CTRL, 16);
+static struct clk_regmap pwm_b =
+	AML_PWM_CLK_GATE(pwm_b, PWM_CLK_AB_CTRL, 24);
+
+static struct clk_regmap pwm_c_sel =
+	AML_PWM_CLK_MUX(pwm_c, PWM_CLK_CD_CTRL, 9);
+static struct clk_regmap pwm_c_div =
+	AML_PWM_CLK_DIV(pwm_c, PWM_CLK_CD_CTRL, 0);
+static struct clk_regmap pwm_c =
+	AML_PWM_CLK_GATE(pwm_c, PWM_CLK_CD_CTRL, 8);
+
+static struct clk_regmap pwm_d_sel =
+	AML_PWM_CLK_MUX(pwm_d, PWM_CLK_CD_CTRL, 25);
+static struct clk_regmap pwm_d_div =
+	AML_PWM_CLK_DIV(pwm_d, PWM_CLK_CD_CTRL, 16);
+static struct clk_regmap pwm_d =
+	AML_PWM_CLK_GATE(pwm_d, PWM_CLK_CD_CTRL, 24);
+
+static struct clk_regmap pwm_e_sel =
+	AML_PWM_CLK_MUX(pwm_e, PWM_CLK_EF_CTRL, 9);
+static struct clk_regmap pwm_e_div =
+	AML_PWM_CLK_DIV(pwm_e, PWM_CLK_EF_CTRL, 0);
+static struct clk_regmap pwm_e =
+	AML_PWM_CLK_GATE(pwm_e, PWM_CLK_EF_CTRL, 8);
+
+static struct clk_regmap pwm_f_sel =
+	AML_PWM_CLK_MUX(pwm_f, PWM_CLK_EF_CTRL, 25);
+static struct clk_regmap pwm_f_div =
+	AML_PWM_CLK_DIV(pwm_f, PWM_CLK_EF_CTRL, 16);
+static struct clk_regmap pwm_f =
+	AML_PWM_CLK_GATE(pwm_f, PWM_CLK_EF_CTRL, 24);
+
+static struct clk_regmap pwm_g_sel =
+	AML_PWM_CLK_MUX(pwm_g, PWM_CLK_GH_CTRL, 9);
+static struct clk_regmap pwm_g_div =
+	AML_PWM_CLK_DIV(pwm_g, PWM_CLK_GH_CTRL, 0);
+static struct clk_regmap pwm_g =
+	AML_PWM_CLK_GATE(pwm_g, PWM_CLK_GH_CTRL, 8);
+
+static struct clk_regmap pwm_h_sel =
+	AML_PWM_CLK_MUX(pwm_h, PWM_CLK_GH_CTRL, 25);
+static struct clk_regmap pwm_h_div =
+	AML_PWM_CLK_DIV(pwm_h, PWM_CLK_GH_CTRL, 16);
+static struct clk_regmap pwm_h =
+	AML_PWM_CLK_GATE(pwm_h, PWM_CLK_GH_CTRL, 24);
+
+static struct clk_regmap pwm_i_sel =
+	AML_PWM_CLK_MUX(pwm_i, PWM_CLK_IJ_CTRL, 9);
+static struct clk_regmap pwm_i_div =
+	AML_PWM_CLK_DIV(pwm_i, PWM_CLK_IJ_CTRL, 0);
+static struct clk_regmap pwm_i =
+	AML_PWM_CLK_GATE(pwm_i, PWM_CLK_IJ_CTRL, 8);
+
+static struct clk_regmap pwm_j_sel =
+	AML_PWM_CLK_MUX(pwm_j, PWM_CLK_IJ_CTRL, 25);
+static struct clk_regmap pwm_j_div =
+	AML_PWM_CLK_DIV(pwm_j, PWM_CLK_IJ_CTRL, 16);
+static struct clk_regmap pwm_j =
+	AML_PWM_CLK_GATE(pwm_j, PWM_CLK_IJ_CTRL, 24);
+
+static struct clk_regmap pwm_k_sel =
+	AML_PWM_CLK_MUX(pwm_k, PWM_CLK_KL_CTRL, 9);
+static struct clk_regmap pwm_k_div =
+	AML_PWM_CLK_DIV(pwm_k, PWM_CLK_KL_CTRL, 0);
+static struct clk_regmap pwm_k =
+	AML_PWM_CLK_GATE(pwm_k, PWM_CLK_KL_CTRL, 8);
+
+static struct clk_regmap pwm_l_sel =
+	AML_PWM_CLK_MUX(pwm_l, PWM_CLK_KL_CTRL, 25);
+static struct clk_regmap pwm_l_div =
+	AML_PWM_CLK_DIV(pwm_l, PWM_CLK_KL_CTRL, 16);
+static struct clk_regmap pwm_l =
+	AML_PWM_CLK_GATE(pwm_l, PWM_CLK_KL_CTRL, 24);
+
+static struct clk_regmap pwm_m_sel =
+	AML_PWM_CLK_MUX(pwm_m, PWM_CLK_MN_CTRL, 9);
+static struct clk_regmap pwm_m_div =
+	AML_PWM_CLK_DIV(pwm_m, PWM_CLK_MN_CTRL, 0);
+static struct clk_regmap pwm_m =
+	AML_PWM_CLK_GATE(pwm_m, PWM_CLK_MN_CTRL, 8);
+
+static struct clk_regmap pwm_n_sel =
+	AML_PWM_CLK_MUX(pwm_n, PWM_CLK_MN_CTRL, 25);
+static struct clk_regmap pwm_n_div =
+	AML_PWM_CLK_DIV(pwm_n, PWM_CLK_MN_CTRL, 16);
+static struct clk_regmap pwm_n =
+	AML_PWM_CLK_GATE(pwm_n, PWM_CLK_MN_CTRL, 24);
+
+static const struct clk_parent_data spicc_parent_data[] = {
+	{ .fw_name = "oscin" },
+	{ .fw_name = "sysclk" },
+	{ .fw_name = "fdiv4" },
+	{ .fw_name = "fdiv3" },
+	{ .fw_name = "fdiv2" },
+	{ .fw_name = "fdiv5" },
+	{ .fw_name = "fdiv7" },
+	{ .fw_name = "gp1" }
+};
+
+static struct clk_regmap spicc_a_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = SPICC_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "spicc_a_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = spicc_parent_data,
+		.num_parents = ARRAY_SIZE(spicc_parent_data),
+	},
+};
+
+static struct clk_regmap spicc_a_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = SPICC_CLK_CTRL,
+		.shift = 0,
+		.width = 6,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "spicc_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spicc_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spicc_a = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = SPICC_CLK_CTRL,
+		.bit_idx = 6,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "spicc_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spicc_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spicc_b_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = SPICC_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 23,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "spicc_b_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = spicc_parent_data,
+		.num_parents = ARRAY_SIZE(spicc_parent_data),
+	},
+};
+
+static struct clk_regmap spicc_b_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = SPICC_CLK_CTRL,
+		.shift = 16,
+		.width = 6,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "spicc_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spicc_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spicc_b = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = SPICC_CLK_CTRL,
+		.bit_idx = 22,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "spicc_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spicc_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data spifc_parent_data[] = {
+	{ .fw_name = "gp0" },
+	{ .fw_name = "fdiv2" },
+	{ .fw_name = "fdiv3" },
+	{ .fw_name = "fdiv2p5" },
+	{ .fw_name = "hifi" },
+	{ .fw_name = "fdiv4" },
+	{ .fw_name = "fdiv5" },
+	{ .fw_name = "fdiv7" }
+};
+
+static struct clk_regmap spifc_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = SPIFC_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "spifc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = spifc_parent_data,
+		.num_parents = ARRAY_SIZE(spifc_parent_data),
+	},
+};
+
+static struct clk_regmap spifc_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = SPIFC_CLK_CTRL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "spifc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spifc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spifc = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = SPIFC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "spifc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spifc_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data emmc_parent_data[] = {
+	{ .fw_name = "oscin" },
+	{ .fw_name = "fdiv2" },
+	{ .fw_name = "fdiv3" },
+	{ .fw_name = "hifi" },
+	{ .fw_name = "fdiv2p5" },
+	{ .fw_name = "fdiv4" },
+	{ .fw_name = "gp1" },
+	{ .fw_name = "gp0" }
+};
+
+static struct clk_regmap sd_emmc_a_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = SD_EMMC_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_a_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = emmc_parent_data,
+		.num_parents = ARRAY_SIZE(emmc_parent_data),
+	},
+};
+
+static struct clk_regmap sd_emmc_a_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = SD_EMMC_CLK_CTRL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sd_emmc_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sd_emmc_a = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = SD_EMMC_CLK_CTRL,
+		.bit_idx = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sd_emmc_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sd_emmc_b_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = SD_EMMC_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_b_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = emmc_parent_data,
+		.num_parents = ARRAY_SIZE(emmc_parent_data),
+	},
+};
+
+static struct clk_regmap sd_emmc_b_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = SD_EMMC_CLK_CTRL,
+		.shift = 16,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sd_emmc_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sd_emmc_b = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = SD_EMMC_CLK_CTRL,
+		.bit_idx = 23,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sd_emmc_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sd_emmc_c_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = NAND_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_c_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = emmc_parent_data,
+		.num_parents = ARRAY_SIZE(emmc_parent_data),
+	},
+};
+
+static struct clk_regmap sd_emmc_c_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = NAND_CLK_CTRL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_c_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sd_emmc_c_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sd_emmc_c = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = NAND_CLK_CTRL,
+		.bit_idx = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_c",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sd_emmc_c_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap ts_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = TS_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "ts_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "oscin",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap ts = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = TS_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "ts",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ts_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data eth_parent = {
+	.fw_name = "fdiv2",
+};
+
+static struct clk_fixed_factor eth_125m_div = {
+	.mult = 1,
+	.div = 8,
+	.hw.init = &(struct clk_init_data) {
+		.name = "eth_125m_div",
+		.ops = &clk_fixed_factor_ops,
+		.parent_data = &eth_parent,
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap eth_125m = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = ETH_CLK_CTRL,
+		.bit_idx = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "eth_125m",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&eth_125m_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap eth_rmii_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = ETH_CLK_CTRL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "eth_rmii_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_data = &eth_parent,
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap eth_rmii = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = ETH_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "eth_rmii",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&eth_rmii_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data mipi_dsi_meas_parent_data[] = {
+	{ .fw_name = "oscin" },
+	{ .fw_name = "fdiv4" },
+	{ .fw_name = "fdiv3" },
+	{ .fw_name = "fdiv5" },
+	{ .fw_name = "gp1" },
+	{ .fw_name = "gp0" },
+	{ .fw_name = "fdiv2" },
+	{ .fw_name = "fdiv7" }
+};
+
+static struct clk_regmap mipi_dsi_meas_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = VDIN_MEAS_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 21,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "mipi_dsi_meas_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = mipi_dsi_meas_parent_data,
+		.num_parents = ARRAY_SIZE(mipi_dsi_meas_parent_data),
+	},
+};
+
+static struct clk_regmap mipi_dsi_meas_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = VDIN_MEAS_CLK_CTRL,
+		.shift = 12,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "mipi_dsi_meas_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&mipi_dsi_meas_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap mipi_dsi_meas = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = VDIN_MEAS_CLK_CTRL,
+		.bit_idx = 20,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "mipi_dsi_meas",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&mipi_dsi_meas_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data dsi_phy_parent_data[] = {
+	{ .fw_name = "gp1" },
+	{ .fw_name = "gp0" },
+	{ .fw_name = "hifi" },
+	{ .fw_name = "fdiv3" },
+	{ .fw_name = "fdiv2" },
+	{ .fw_name = "fdiv2p5" },
+	{ .fw_name = "fdiv4" },
+	{ .fw_name = "fdiv7" }
+};
+
+static struct clk_regmap dsi_phy_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = MIPIDSI_PHY_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 12,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dsi_phy_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsi_phy_parent_data,
+		.num_parents = ARRAY_SIZE(dsi_phy_parent_data),
+	},
+};
+
+static struct clk_regmap dsi_phy_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = MIPIDSI_PHY_CLK_CTRL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dsi_phy_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dsi_phy_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dsi_phy = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = MIPIDSI_PHY_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dsi_phy",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dsi_phy_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data vout_mclk_parent_data[] = {
+	{ .fw_name = "fdiv2p5" },
+	{ .fw_name = "fdiv3" },
+	{ .fw_name = "fdiv4" },
+	{ .fw_name = "fdiv5" },
+	{ .fw_name = "gp0" },
+	{ .fw_name = "hifi" },
+	{ .fw_name = "gp1" },
+	{ .fw_name = "fdiv7" }
+};
+
+static struct clk_regmap vout_mclk_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = VOUTENC_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "vout_mclk_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = vout_mclk_parent_data,
+		.num_parents = ARRAY_SIZE(vout_mclk_parent_data),
+	},
+};
+
+static struct clk_regmap vout_mclk_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = VOUTENC_CLK_CTRL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "vout_mclk_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&vout_mclk_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap vout_mclk = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = VOUTENC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "vout_mclk",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&vout_mclk_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data vout_enc_parent_data[] = {
+	{ .fw_name = "gp1" },
+	{ .fw_name = "fdiv3" },
+	{ .fw_name = "fdiv4" },
+	{ .fw_name = "fdiv5" },
+	{ .fw_name = "gp0" },
+	{ .fw_name = "hifi" },
+	{ .fw_name = "fdiv2p5" },
+	{ .fw_name = "fdiv7" }
+};
+
+static struct clk_regmap vout_enc_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = VOUTENC_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "vout_enc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = vout_enc_parent_data,
+		.num_parents = ARRAY_SIZE(vout_enc_parent_data),
+	},
+};
+
+static struct clk_regmap vout_enc_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = VOUTENC_CLK_CTRL,
+		.shift = 16,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "vout_enc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&vout_enc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap vout_enc = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = VOUTENC_CLK_CTRL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "vout_enc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&vout_enc_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data hcodec_pre_parent_data[] = {
+	{ .fw_name = "fdiv2p5" },
+	{ .fw_name = "fdiv3" },
+	{ .fw_name = "fdiv4" },
+	{ .fw_name = "fdiv5" },
+	{ .fw_name = "fdiv7" },
+	{ .fw_name = "hifi" },
+	{ .fw_name = "gp0" },
+	{ .fw_name = "oscin" }
+};
+
+static struct clk_regmap hcodec_0_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = VDEC_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "hcodec_0_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = hcodec_pre_parent_data,
+		.num_parents = ARRAY_SIZE(hcodec_pre_parent_data),
+	},
+};
+
+static struct clk_regmap hcodec_0_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = VDEC_CLK_CTRL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "hcodec_0_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&hcodec_0_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap hcodec_0 = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = VDEC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "hcodec_0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&hcodec_0_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap hcodec_1_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = VDEC3_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "hcodec_1_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = hcodec_pre_parent_data,
+		.num_parents = ARRAY_SIZE(hcodec_pre_parent_data),
+	},
+};
+
+static struct clk_regmap hcodec_1_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = VDEC3_CLK_CTRL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "hcodec_1_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&hcodec_1_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap hcodec_1 = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = VDEC3_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "hcodec_1",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&hcodec_1_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data hcodec_parent_data[] = {
+	{ .hw = &hcodec_0.hw },
+	{ .hw = &hcodec_1.hw }
+};
+
+static struct clk_regmap hcodec = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = VDEC3_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "hcodec",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = hcodec_parent_data,
+		.num_parents = ARRAY_SIZE(hcodec_parent_data),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data vc9000e_parent_data[] = {
+	{ .fw_name = "oscin" },
+	{ .fw_name = "fdiv4" },
+	{ .fw_name = "fdiv3" },
+	{ .fw_name = "fdiv5" },
+	{ .fw_name = "fdiv7" },
+	{ .fw_name = "fdiv2p5" },
+	{ .fw_name = "hifi" },
+	{ .fw_name = "gp0" }
+};
+
+static struct clk_regmap vc9000e_aclk_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = VC9000E_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "vc9000e_aclk_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = vc9000e_parent_data,
+		.num_parents = ARRAY_SIZE(vc9000e_parent_data),
+	},
+};
+
+static struct clk_regmap vc9000e_aclk_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = VC9000E_CLK_CTRL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "vc9000e_aclk_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&vc9000e_aclk_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap vc9000e_aclk = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = VC9000E_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "vc9000e_aclk",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&vc9000e_aclk_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap vc9000e_core_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = VC9000E_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "vc9000e_core_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = vc9000e_parent_data,
+		.num_parents = ARRAY_SIZE(vc9000e_parent_data),
+	},
+};
+
+static struct clk_regmap vc9000e_core_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = VC9000E_CLK_CTRL,
+		.shift = 16,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "vc9000e_core_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&vc9000e_core_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap vc9000e_core = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = VC9000E_CLK_CTRL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "vc9000e_core",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&vc9000e_core_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data csi_phy_parent_data[] = {
+	{ .fw_name = "fdiv2p5" },
+	{ .fw_name = "fdiv3" },
+	{ .fw_name = "fdiv4" },
+	{ .fw_name = "fdiv5" },
+	{ .fw_name = "gp0" },
+	{ .fw_name = "hifi" },
+	{ .fw_name = "gp1" },
+	{ .fw_name = "oscin" }
+};
+
+static struct clk_regmap csi_phy0_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = ISP0_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "csi_phy0_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = csi_phy_parent_data,
+		.num_parents = ARRAY_SIZE(csi_phy_parent_data),
+	},
+};
+
+static struct clk_regmap csi_phy0_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = ISP0_CLK_CTRL,
+		.shift = 16,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "csi_phy0_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&csi_phy0_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap csi_phy0 = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = ISP0_CLK_CTRL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "csi_phy0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&csi_phy0_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data dewarpa_parent_data[] = {
+	{ .fw_name = "fdiv2p5" },
+	{ .fw_name = "fdiv3" },
+	{ .fw_name = "fdiv4" },
+	{ .fw_name = "fdiv5" },
+	{ .fw_name = "gp0" },
+	{ .fw_name = "hifi" },
+	{ .fw_name = "gp1" },
+	{ .fw_name = "fdiv7" }
+};
+
+static struct clk_regmap dewarpa_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = DEWARPA_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dewarpa_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dewarpa_parent_data,
+		.num_parents = ARRAY_SIZE(dewarpa_parent_data),
+	},
+};
+
+static struct clk_regmap dewarpa_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = DEWARPA_CLK_CTRL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dewarpa_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dewarpa_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dewarpa = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = DEWARPA_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dewarpa",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dewarpa_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data isp_parent_data[] = {
+	{ .fw_name = "fdiv2p5" },
+	{ .fw_name = "fdiv3" },
+	{ .fw_name = "fdiv4" },
+	{ .fw_name = "fdiv5" },
+	{ .fw_name = "gp0" },
+	{ .fw_name = "hifi" },
+	{ .fw_name = "gp1" },
+	{ .fw_name = "oscin" }
+};
+
+static struct clk_regmap isp0_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = ISP0_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "isp0_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = isp_parent_data,
+		.num_parents = ARRAY_SIZE(isp_parent_data),
+	},
+};
+
+static struct clk_regmap isp0_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = ISP0_CLK_CTRL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "isp0_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&isp0_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap isp0 = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = ISP0_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "isp0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&isp0_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data nna_core_parent_data[] = {
+	{ .fw_name = "oscin" },
+	{ .fw_name = "fdiv2p5" },
+	{ .fw_name = "fdiv4" },
+	{ .fw_name = "fdiv3" },
+	{ .fw_name = "fdiv5" },
+	{ .fw_name = "fdiv2" },
+	{ .fw_name = "gp1" },
+	{ .fw_name = "hifi" }
+};
+
+static struct clk_regmap nna_core_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = NNA_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "nna_core_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = nna_core_parent_data,
+		.num_parents = ARRAY_SIZE(nna_core_parent_data),
+	},
+};
+
+static struct clk_regmap nna_core_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = NNA_CLK_CTRL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "nna_core_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&nna_core_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap nna_core = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = NNA_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "nna_core",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&nna_core_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data ge2d_parent_data[] = {
+	{ .fw_name = "oscin" },
+	{ .fw_name = "fdiv2p5" },
+	{ .fw_name = "fdiv3" },
+	{ .fw_name = "fdiv4" },
+	{ .fw_name = "hifi" },
+	{ .fw_name = "fdiv5" },
+	{ .fw_name = "gp0" },
+	{ .hw = &rtc_clk.hw }
+};
+
+static struct clk_regmap ge2d_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = GE2D_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "ge2d_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = ge2d_parent_data,
+		.num_parents = ARRAY_SIZE(ge2d_parent_data),
+	},
+};
+
+static struct clk_regmap ge2d_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = GE2D_CLK_CTRL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "ge2d_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ge2d_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap ge2d = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = GE2D_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "ge2d",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ge2d_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data vapb_parent_data[] = {
+	{ .fw_name = "fdiv2p5" },
+	{ .fw_name = "fdiv3" },
+	{ .fw_name = "fdiv4" },
+	{ .fw_name = "fdiv5" },
+	{ .fw_name = "gp0" },
+	{ .fw_name = "hifi" },
+	{ .fw_name = "gp1" },
+	{ .fw_name = "oscin" },
+};
+
+static struct clk_regmap vapb_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = VAPB_CLK_CTRL,
+		.mask = 0x7,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "vapb_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = vapb_parent_data,
+		.num_parents = ARRAY_SIZE(vapb_parent_data),
+	},
+};
+
+static struct clk_regmap vapb_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = VAPB_CLK_CTRL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "vapb_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&vapb_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap vapb = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = VAPB_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "vapb",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&vapb_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_hw *c3_periphs_hw_clks[] = {
+	[CLKID_RTC_XTAL_CLKIN]		= &rtc_xtal_clkin.hw,
+	[CLKID_RTC_32K_DIV]		= &rtc_32k_div.hw,
+	[CLKID_RTC_32K_MUX]		= &rtc_32k_mux.hw,
+	[CLKID_RTC_32K]			= &rtc_32k.hw,
+	[CLKID_RTC_CLK]			= &rtc_clk.hw,
+	[CLKID_SYS_RESET_CTRL]		= &sys_reset_ctrl.hw,
+	[CLKID_SYS_PWR_CTRL]		= &sys_pwr_ctrl.hw,
+	[CLKID_SYS_PAD_CTRL]		= &sys_pad_ctrl.hw,
+	[CLKID_SYS_CTRL]		= &sys_ctrl.hw,
+	[CLKID_SYS_TS_PLL]		= &sys_ts_pll.hw,
+	[CLKID_SYS_DEV_ARB]		= &sys_dev_arb.hw,
+	[CLKID_SYS_MMC_PCLK]		= &sys_mmc_pclk.hw,
+	[CLKID_SYS_CPU_CTRL]		= &sys_cpu_ctrl.hw,
+	[CLKID_SYS_JTAG_CTRL]		= &sys_jtag_ctrl.hw,
+	[CLKID_SYS_IR_CTRL]		= &sys_ir_ctrl.hw,
+	[CLKID_SYS_IRQ_CTRL]		= &sys_irq_ctrl.hw,
+	[CLKID_SYS_MSR_CLK]		= &sys_msr_clk.hw,
+	[CLKID_SYS_ROM]			= &sys_rom.hw,
+	[CLKID_SYS_UART_F]		= &sys_uart_f.hw,
+	[CLKID_SYS_CPU_ARB]		= &sys_cpu_apb.hw,
+	[CLKID_SYS_RSA]			= &sys_rsa.hw,
+	[CLKID_SYS_SAR_ADC]		= &sys_sar_adc.hw,
+	[CLKID_SYS_STARTUP]		= &sys_startup.hw,
+	[CLKID_SYS_SECURE]		= &sys_secure.hw,
+	[CLKID_SYS_SPIFC]		= &sys_spifc.hw,
+	[CLKID_SYS_NNA]			= &sys_nna.hw,
+	[CLKID_SYS_ETH_MAC]		= &sys_eth_mac.hw,
+	[CLKID_SYS_GIC]			= &sys_gic.hw,
+	[CLKID_SYS_RAMA]		= &sys_rama.hw,
+	[CLKID_SYS_BIG_NIC]		= &sys_big_nic.hw,
+	[CLKID_SYS_RAMB]		= &sys_ramb.hw,
+	[CLKID_SYS_AUDIO_PCLK]		= &sys_audio_pclk.hw,
+	[CLKID_SYS_PWM_KL]		= &sys_pwm_kl.hw,
+	[CLKID_SYS_PWM_IJ]		= &sys_pwm_ij.hw,
+	[CLKID_SYS_USB]			= &sys_usb.hw,
+	[CLKID_SYS_SD_EMMC_A]		= &sys_sd_emmc_a.hw,
+	[CLKID_SYS_SD_EMMC_C]		= &sys_sd_emmc_c.hw,
+	[CLKID_SYS_PWM_AB]		= &sys_pwm_ab.hw,
+	[CLKID_SYS_PWM_CD]		= &sys_pwm_cd.hw,
+	[CLKID_SYS_PWM_EF]		= &sys_pwm_ef.hw,
+	[CLKID_SYS_PWM_GH]		= &sys_pwm_gh.hw,
+	[CLKID_SYS_SPICC_1]		= &sys_spicc_1.hw,
+	[CLKID_SYS_SPICC_0]		= &sys_spicc_0.hw,
+	[CLKID_SYS_UART_A]		= &sys_uart_a.hw,
+	[CLKID_SYS_UART_B]		= &sys_uart_b.hw,
+	[CLKID_SYS_UART_C]		= &sys_uart_c.hw,
+	[CLKID_SYS_UART_D]		= &sys_uart_d.hw,
+	[CLKID_SYS_UART_E]		= &sys_uart_e.hw,
+	[CLKID_SYS_I2C_M_A]		= &sys_i2c_m_a.hw,
+	[CLKID_SYS_I2C_M_B]		= &sys_i2c_m_b.hw,
+	[CLKID_SYS_I2C_M_C]		= &sys_i2c_m_c.hw,
+	[CLKID_SYS_I2C_M_D]		= &sys_i2c_m_d.hw,
+	[CLKID_SYS_I2S_S_A]		= &sys_i2c_s_a.hw,
+	[CLKID_SYS_RTC]			= &sys_rtc.hw,
+	[CLKID_SYS_GE2D]		= &sys_ge2d.hw,
+	[CLKID_SYS_ISP]			= &sys_isp.hw,
+	[CLKID_SYS_GPV_ISP_NIC]		= &sys_gpv_isp_nic.hw,
+	[CLKID_SYS_GPV_CVE_NIC]		= &sys_gpv_cve_nic.hw,
+	[CLKID_SYS_MIPI_DSI_HOST]	= &sys_mipi_dsi_host.hw,
+	[CLKID_SYS_MIPI_DSI_PHY]	= &sys_mipi_dsi_phy.hw,
+	[CLKID_SYS_ETH_PHY]		= &sys_eth_phy.hw,
+	[CLKID_SYS_ACODEC]		= &sys_acodec.hw,
+	[CLKID_SYS_DWAP]		= &sys_dwap.hw,
+	[CLKID_SYS_DOS]			= &sys_dos.hw,
+	[CLKID_SYS_CVE]			= &sys_cve.hw,
+	[CLKID_SYS_VOUT]		= &sys_vout.hw,
+	[CLKID_SYS_VC9000E]		= &sys_vc9000e.hw,
+	[CLKID_SYS_PWM_MN]		= &sys_pwm_mn.hw,
+	[CLKID_SYS_SD_EMMC_B]		= &sys_sd_emmc_b.hw,
+	[CLKID_AXI_SYS_NIC]		= &axi_sys_nic.hw,
+	[CLKID_AXI_ISP_NIC]		= &axi_isp_nic.hw,
+	[CLKID_AXI_CVE_NIC]		= &axi_cve_nic.hw,
+	[CLKID_AXI_RAMB]		= &axi_ramb.hw,
+	[CLKID_AXI_RAMA]		= &axi_rama.hw,
+	[CLKID_AXI_CPU_DMC]		= &axi_cpu_dmc.hw,
+	[CLKID_AXI_NIC]			= &axi_nic.hw,
+	[CLKID_AXI_DMA]			= &axi_dma.hw,
+	[CLKID_AXI_MUX_NIC]		= &axi_mux_nic.hw,
+	[CLKID_AXI_CVE]			= &axi_cve.hw,
+	[CLKID_AXI_DEV1_DMC]		= &axi_dev1_dmc.hw,
+	[CLKID_AXI_DEV0_DMC]		= &axi_dev0_dmc.hw,
+	[CLKID_AXI_DSP_DMC]		= &axi_dsp_dmc.hw,
+	[CLKID_12_24M_IN]		= &clk_12_24m_in.hw,
+	[CLKID_12M_24M]			= &clk_12_24m.hw,
+	[CLKID_FCLK_25M_DIV]		= &fclk_25m_div.hw,
+	[CLKID_FCLK_25M]		= &fclk_25m.hw,
+	[CLKID_GEN_SEL]			= &gen_sel.hw,
+	[CLKID_GEN_DIV]			= &gen_div.hw,
+	[CLKID_GEN]			= &gen.hw,
+	[CLKID_SARADC_SEL]		= &saradc_sel.hw,
+	[CLKID_SARADC_DIV]		= &saradc_div.hw,
+	[CLKID_SARADC]			= &saradc.hw,
+	[CLKID_PWM_A_SEL]		= &pwm_a_sel.hw,
+	[CLKID_PWM_A_DIV]		= &pwm_a_div.hw,
+	[CLKID_PWM_A]			= &pwm_a.hw,
+	[CLKID_PWM_B_SEL]		= &pwm_b_sel.hw,
+	[CLKID_PWM_B_DIV]		= &pwm_b_div.hw,
+	[CLKID_PWM_B]			= &pwm_b.hw,
+	[CLKID_PWM_C_SEL]		= &pwm_c_sel.hw,
+	[CLKID_PWM_C_DIV]		= &pwm_c_div.hw,
+	[CLKID_PWM_C]			= &pwm_c.hw,
+	[CLKID_PWM_D_SEL]		= &pwm_d_sel.hw,
+	[CLKID_PWM_D_DIV]		= &pwm_d_div.hw,
+	[CLKID_PWM_D]			= &pwm_d.hw,
+	[CLKID_PWM_E_SEL]		= &pwm_e_sel.hw,
+	[CLKID_PWM_E_DIV]		= &pwm_e_div.hw,
+	[CLKID_PWM_E]			= &pwm_e.hw,
+	[CLKID_PWM_F_SEL]		= &pwm_f_sel.hw,
+	[CLKID_PWM_F_DIV]		= &pwm_f_div.hw,
+	[CLKID_PWM_F]			= &pwm_f.hw,
+	[CLKID_PWM_G_SEL]		= &pwm_g_sel.hw,
+	[CLKID_PWM_G_DIV]		= &pwm_g_div.hw,
+	[CLKID_PWM_G]			= &pwm_g.hw,
+	[CLKID_PWM_H_SEL]		= &pwm_h_sel.hw,
+	[CLKID_PWM_H_DIV]		= &pwm_h_div.hw,
+	[CLKID_PWM_H]			= &pwm_h.hw,
+	[CLKID_PWM_I_SEL]		= &pwm_i_sel.hw,
+	[CLKID_PWM_I_DIV]		= &pwm_i_div.hw,
+	[CLKID_PWM_I]			= &pwm_i.hw,
+	[CLKID_PWM_J_SEL]		= &pwm_j_sel.hw,
+	[CLKID_PWM_J_DIV]		= &pwm_j_div.hw,
+	[CLKID_PWM_J]			= &pwm_j.hw,
+	[CLKID_PWM_K_SEL]		= &pwm_k_sel.hw,
+	[CLKID_PWM_K_DIV]		= &pwm_k_div.hw,
+	[CLKID_PWM_K]			= &pwm_k.hw,
+	[CLKID_PWM_L_SEL]		= &pwm_l_sel.hw,
+	[CLKID_PWM_L_DIV]		= &pwm_l_div.hw,
+	[CLKID_PWM_L]			= &pwm_l.hw,
+	[CLKID_PWM_M_SEL]		= &pwm_m_sel.hw,
+	[CLKID_PWM_M_DIV]		= &pwm_m_div.hw,
+	[CLKID_PWM_M]			= &pwm_m.hw,
+	[CLKID_PWM_N_SEL]		= &pwm_n_sel.hw,
+	[CLKID_PWM_N_DIV]		= &pwm_n_div.hw,
+	[CLKID_PWM_N]			= &pwm_n.hw,
+	[CLKID_SPICC_A_SEL]		= &spicc_a_sel.hw,
+	[CLKID_SPICC_A_DIV]		= &spicc_a_div.hw,
+	[CLKID_SPICC_A]			= &spicc_a.hw,
+	[CLKID_SPICC_B_SEL]		= &spicc_b_sel.hw,
+	[CLKID_SPICC_B_DIV]		= &spicc_b_div.hw,
+	[CLKID_SPICC_B]			= &spicc_b.hw,
+	[CLKID_SPIFC_SEL]		= &spifc_sel.hw,
+	[CLKID_SPIFC_DIV]		= &spifc_div.hw,
+	[CLKID_SPIFC]			= &spifc.hw,
+	[CLKID_SD_EMMC_A_SEL]		= &sd_emmc_a_sel.hw,
+	[CLKID_SD_EMMC_A_DIV]		= &sd_emmc_a_div.hw,
+	[CLKID_SD_EMMC_A]		= &sd_emmc_a.hw,
+	[CLKID_SD_EMMC_B_SEL]		= &sd_emmc_b_sel.hw,
+	[CLKID_SD_EMMC_B_DIV]		= &sd_emmc_b_div.hw,
+	[CLKID_SD_EMMC_B]		= &sd_emmc_b.hw,
+	[CLKID_SD_EMMC_C_SEL]		= &sd_emmc_c_sel.hw,
+	[CLKID_SD_EMMC_C_DIV]		= &sd_emmc_c_div.hw,
+	[CLKID_SD_EMMC_C]		= &sd_emmc_c.hw,
+	[CLKID_TS_DIV]			= &ts_div.hw,
+	[CLKID_TS]			= &ts.hw,
+	[CLKID_ETH_125M_DIV]		= &eth_125m_div.hw,
+	[CLKID_ETH_125M]		= &eth_125m.hw,
+	[CLKID_ETH_RMII_DIV]		= &eth_rmii_div.hw,
+	[CLKID_ETH_RMII]		= &eth_rmii.hw,
+	[CLKID_MIPI_DSI_MEAS_SEL]	= &mipi_dsi_meas_sel.hw,
+	[CLKID_MIPI_DSI_MEAS_DIV]	= &mipi_dsi_meas_div.hw,
+	[CLKID_MIPI_DSI_MEAS]		= &mipi_dsi_meas.hw,
+	[CLKID_DSI_PHY_SEL]		= &dsi_phy_sel.hw,
+	[CLKID_DSI_PHY_DIV]		= &dsi_phy_div.hw,
+	[CLKID_DSI_PHY]			= &dsi_phy.hw,
+	[CLKID_VOUT_MCLK_SEL]		= &vout_mclk_sel.hw,
+	[CLKID_VOUT_MCLK_DIV]		= &vout_mclk_div.hw,
+	[CLKID_VOUT_MCLK]		= &vout_mclk.hw,
+	[CLKID_VOUT_ENC_SEL]		= &vout_enc_sel.hw,
+	[CLKID_VOUT_ENC_DIV]		= &vout_enc_div.hw,
+	[CLKID_VOUT_ENC]		= &vout_enc.hw,
+	[CLKID_HCODEC_0_SEL]		= &hcodec_0_sel.hw,
+	[CLKID_HCODEC_0_DIV]		= &hcodec_0_div.hw,
+	[CLKID_HCODEC_0]		= &hcodec_0.hw,
+	[CLKID_HCODEC_1_SEL]		= &hcodec_1_sel.hw,
+	[CLKID_HCODEC_1_DIV]		= &hcodec_1_div.hw,
+	[CLKID_HCODEC_1]		= &hcodec_1.hw,
+	[CLKID_HCODEC]			= &hcodec.hw,
+	[CLKID_VC9000E_ACLK_SEL]	= &vc9000e_aclk_sel.hw,
+	[CLKID_VC9000E_ACLK_DIV]	= &vc9000e_aclk_div.hw,
+	[CLKID_VC9000E_ACLK]		= &vc9000e_aclk.hw,
+	[CLKID_VC9000E_CORE_SEL]	= &vc9000e_core_sel.hw,
+	[CLKID_VC9000E_CORE_DIV]	= &vc9000e_core_div.hw,
+	[CLKID_VC9000E_CORE]		= &vc9000e_core.hw,
+	[CLKID_CSI_PHY0_SEL]		= &csi_phy0_sel.hw,
+	[CLKID_CSI_PHY0_DIV]		= &csi_phy0_div.hw,
+	[CLKID_CSI_PHY0]		= &csi_phy0.hw,
+	[CLKID_DEWARPA_SEL]		= &dewarpa_sel.hw,
+	[CLKID_DEWARPA_DIV]		= &dewarpa_div.hw,
+	[CLKID_DEWARPA]			= &dewarpa.hw,
+	[CLKID_ISP0_SEL]		= &isp0_sel.hw,
+	[CLKID_ISP0_DIV]		= &isp0_div.hw,
+	[CLKID_ISP0]			= &isp0.hw,
+	[CLKID_NNA_CORE_SEL]		= &nna_core_sel.hw,
+	[CLKID_NNA_CORE_DIV]		= &nna_core_div.hw,
+	[CLKID_NNA_CORE]		= &nna_core.hw,
+	[CLKID_GE2D_SEL]		= &ge2d_sel.hw,
+	[CLKID_GE2D_DIV]		= &ge2d_div.hw,
+	[CLKID_GE2D]			= &ge2d.hw,
+	[CLKID_VAPB_SEL]		= &vapb_sel.hw,
+	[CLKID_VAPB_DIV]		= &vapb_div.hw,
+	[CLKID_VAPB]			= &vapb.hw,
+};
+
+/* Convenience table to populate regmap in .probe */
+static struct clk_regmap *const c3_periphs_clk_regmaps[] = {
+	&rtc_xtal_clkin,
+	&rtc_32k_div,
+	&rtc_32k_mux,
+	&rtc_32k,
+	&rtc_clk,
+	&sys_reset_ctrl,
+	&sys_pwr_ctrl,
+	&sys_pad_ctrl,
+	&sys_ctrl,
+	&sys_ts_pll,
+	&sys_dev_arb,
+	&sys_mmc_pclk,
+	&sys_cpu_ctrl,
+	&sys_jtag_ctrl,
+	&sys_ir_ctrl,
+	&sys_irq_ctrl,
+	&sys_msr_clk,
+	&sys_rom,
+	&sys_uart_f,
+	&sys_cpu_apb,
+	&sys_rsa,
+	&sys_sar_adc,
+	&sys_startup,
+	&sys_secure,
+	&sys_spifc,
+	&sys_nna,
+	&sys_eth_mac,
+	&sys_gic,
+	&sys_rama,
+	&sys_big_nic,
+	&sys_ramb,
+	&sys_audio_pclk,
+	&sys_pwm_kl,
+	&sys_pwm_ij,
+	&sys_usb,
+	&sys_sd_emmc_a,
+	&sys_sd_emmc_c,
+	&sys_pwm_ab,
+	&sys_pwm_cd,
+	&sys_pwm_ef,
+	&sys_pwm_gh,
+	&sys_spicc_1,
+	&sys_spicc_0,
+	&sys_uart_a,
+	&sys_uart_b,
+	&sys_uart_c,
+	&sys_uart_d,
+	&sys_uart_e,
+	&sys_i2c_m_a,
+	&sys_i2c_m_b,
+	&sys_i2c_m_c,
+	&sys_i2c_m_d,
+	&sys_i2c_s_a,
+	&sys_rtc,
+	&sys_ge2d,
+	&sys_isp,
+	&sys_gpv_isp_nic,
+	&sys_gpv_cve_nic,
+	&sys_mipi_dsi_host,
+	&sys_mipi_dsi_phy,
+	&sys_eth_phy,
+	&sys_acodec,
+	&sys_dwap,
+	&sys_dos,
+	&sys_cve,
+	&sys_vout,
+	&sys_vc9000e,
+	&sys_pwm_mn,
+	&sys_sd_emmc_b,
+	&axi_sys_nic,
+	&axi_isp_nic,
+	&axi_cve_nic,
+	&axi_ramb,
+	&axi_rama,
+	&axi_cpu_dmc,
+	&axi_nic,
+	&axi_dma,
+	&axi_mux_nic,
+	&axi_cve,
+	&axi_dev1_dmc,
+	&axi_dev0_dmc,
+	&axi_dsp_dmc,
+	&clk_12_24m_in,
+	&clk_12_24m,
+	&fclk_25m_div,
+	&fclk_25m,
+	&gen_sel,
+	&gen_div,
+	&gen,
+	&saradc_sel,
+	&saradc_div,
+	&saradc,
+	&pwm_a_sel,
+	&pwm_a_div,
+	&pwm_a,
+	&pwm_b_sel,
+	&pwm_b_div,
+	&pwm_b,
+	&pwm_c_sel,
+	&pwm_c_div,
+	&pwm_c,
+	&pwm_d_sel,
+	&pwm_d_div,
+	&pwm_d,
+	&pwm_e_sel,
+	&pwm_e_div,
+	&pwm_e,
+	&pwm_f_sel,
+	&pwm_f_div,
+	&pwm_f,
+	&pwm_g_sel,
+	&pwm_g_div,
+	&pwm_g,
+	&pwm_h_sel,
+	&pwm_h_div,
+	&pwm_h,
+	&pwm_i_sel,
+	&pwm_i_div,
+	&pwm_i,
+	&pwm_j_sel,
+	&pwm_j_div,
+	&pwm_j,
+	&pwm_k_sel,
+	&pwm_k_div,
+	&pwm_k,
+	&pwm_l_sel,
+	&pwm_l_div,
+	&pwm_l,
+	&pwm_m_sel,
+	&pwm_m_div,
+	&pwm_m,
+	&pwm_n_sel,
+	&pwm_n_div,
+	&pwm_n,
+	&spicc_a_sel,
+	&spicc_a_div,
+	&spicc_a,
+	&spicc_b_sel,
+	&spicc_b_div,
+	&spicc_b,
+	&spifc_sel,
+	&spifc_div,
+	&spifc,
+	&sd_emmc_a_sel,
+	&sd_emmc_a_div,
+	&sd_emmc_a,
+	&sd_emmc_b_sel,
+	&sd_emmc_b_div,
+	&sd_emmc_b,
+	&sd_emmc_c_sel,
+	&sd_emmc_c_div,
+	&sd_emmc_c,
+	&ts_div,
+	&ts,
+	&eth_125m,
+	&eth_rmii_div,
+	&eth_rmii,
+	&mipi_dsi_meas_sel,
+	&mipi_dsi_meas_div,
+	&mipi_dsi_meas,
+	&dsi_phy_sel,
+	&dsi_phy_div,
+	&dsi_phy,
+	&vout_mclk_sel,
+	&vout_mclk_div,
+	&vout_mclk,
+	&vout_enc_sel,
+	&vout_enc_div,
+	&vout_enc,
+	&hcodec_0_sel,
+	&hcodec_0_div,
+	&hcodec_0,
+	&hcodec_1_sel,
+	&hcodec_1_div,
+	&hcodec_1,
+	&hcodec,
+	&vc9000e_aclk_sel,
+	&vc9000e_aclk_div,
+	&vc9000e_aclk,
+	&vc9000e_core_sel,
+	&vc9000e_core_div,
+	&vc9000e_core,
+	&csi_phy0_sel,
+	&csi_phy0_div,
+	&csi_phy0,
+	&dewarpa_sel,
+	&dewarpa_div,
+	&dewarpa,
+	&isp0_sel,
+	&isp0_div,
+	&isp0,
+	&nna_core_sel,
+	&nna_core_div,
+	&nna_core,
+	&ge2d_sel,
+	&ge2d_div,
+	&ge2d,
+	&vapb_sel,
+	&vapb_div,
+	&vapb,
+};
+
+static struct regmap_config clkc_regmap_config = {
+	.reg_bits       = 32,
+	.val_bits       = 32,
+	.reg_stride     = 4,
+	.max_register   = NNA_CLK_CTRL,
+};
+
+static struct meson_clk_hw_data c3_periphs_clks = {
+	.hws = c3_periphs_hw_clks,
+	.num = ARRAY_SIZE(c3_periphs_hw_clks),
+};
+
+static int aml_c3_peripherals_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct regmap *regmap;
+	void __iomem *base;
+	int clkid, ret, i;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	/* Populate regmap for the regmap backed clocks */
+	for (i = 0; i < ARRAY_SIZE(c3_periphs_clk_regmaps); i++)
+		c3_periphs_clk_regmaps[i]->map = regmap;
+
+	for (clkid = 0; clkid < c3_periphs_clks.num; clkid++) {
+		/* array might be sparse */
+		if (!c3_periphs_clks.hws[clkid])
+			continue;
+
+		ret = devm_clk_hw_register(dev, c3_periphs_clks.hws[clkid]);
+		if (ret) {
+			dev_err(dev, "Clock registration failed\n");
+			return ret;
+		}
+	}
+
+	return devm_of_clk_add_hw_provider(dev, meson_clk_hw_get,
+					   &c3_periphs_clks);
+}
+
+static const struct of_device_id c3_peripherals_clkc_match_table[] = {
+	{
+		.compatible = "amlogic,c3-peripherals-clkc",
+	},
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, c3_peripherals_clkc_match_table);
+
+static struct platform_driver c3_peripherals_driver = {
+	.probe		= aml_c3_peripherals_probe,
+	.driver		= {
+		.name	= "c3-peripherals-clkc",
+		.of_match_table = c3_peripherals_clkc_match_table,
+	},
+};
+
+module_platform_driver(c3_peripherals_driver);
+MODULE_AUTHOR("Chuan Liu <chuan.liu@amlogic.com>");
+MODULE_LICENSE("GPL");