| Message ID | 20240429001317.432-9-jszhang@kernel.org (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | riscv: dts: starfive: add Milkv Mars board device tree | expand |
| Context | Check | Description |
|---|---|---|
| conchuod/vmtest-fixes-PR | fail | merge-conflict |
Jisheng Zhang wrote: > The Milkv Mars is a development board based on the Starfive JH7110 SoC. > The board features: > > - JH7110 SoC > - 1/2/4/8 GiB LPDDR4 DRAM > - AXP15060 PMIC > - 40 pin GPIO header > - 3x USB 3.0 host port > - 1x USB 2.0 host port > - 1x M.2 E-Key > - 1x eMMC slot > - 1x MicroSD slot > - 1x QSPI Flash > - 1x 1Gbps Ethernet port > - 1x HDMI port > - 1x 2-lane DSI and 1x 4-lane DSI > - 1x 2-lane CSI > > Add the devicetree file describing the currently supported features, > namely PMIC, UART, I2C, GPIO, SD card, QSPI Flash, eMMC and Ethernet. > > Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile index 0141504c0f5c..2fa0cd7f31c3 100644 --- a/arch/riscv/boot/dts/starfive/Makefile +++ b/arch/riscv/boot/dts/starfive/Makefile @@ -8,5 +8,6 @@ DTC_FLAGS_jh7110-starfive-visionfive-2-v1.3b := -@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-beaglev-starlight.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-mars.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts new file mode 100644 index 000000000000..fa0eac78e0ba --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org> + */ + +/dts-v1/; +#include "jh7110-common.dtsi" + +/ { + model = "Milk-V Mars"; + compatible = "milkv,mars", "starfive,jh7110"; +}; + +&gmac0 { + starfive,tx-use-rgmii-clk; + assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>; + assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>; +}; + + +&phy0 { + motorcomm,tx-clk-adj-enabled; + motorcomm,tx-clk-10-inverted; + motorcomm,tx-clk-100-inverted; + motorcomm,tx-clk-1000-inverted; + motorcomm,rx-clk-drv-microamp = <3970>; + motorcomm,rx-data-drv-microamp = <2910>; + rx-internal-delay-ps = <1500>; + tx-internal-delay-ps = <1500>; +};
The Milkv Mars is a development board based on the Starfive JH7110 SoC. The board features: - JH7110 SoC - 1/2/4/8 GiB LPDDR4 DRAM - AXP15060 PMIC - 40 pin GPIO header - 3x USB 3.0 host port - 1x USB 2.0 host port - 1x M.2 E-Key - 1x eMMC slot - 1x MicroSD slot - 1x QSPI Flash - 1x 1Gbps Ethernet port - 1x HDMI port - 1x 2-lane DSI and 1x 4-lane DSI - 1x 2-lane CSI Add the devicetree file describing the currently supported features, namely PMIC, UART, I2C, GPIO, SD card, QSPI Flash, eMMC and Ethernet. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> --- arch/riscv/boot/dts/starfive/Makefile | 1 + .../boot/dts/starfive/jh7110-milkv-mars.dts | 30 +++++++++++++++++++ 2 files changed, 31 insertions(+) create mode 100644 arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts