| Message ID | 20240501-pinctrl-cleanup-v1-1-797ceca46e5c@nxp.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | pinctrl: Use scope based of_node_put() cleanups | expand |
On Wed, May 01, 2024 at 08:55:59PM +0800, Peng Fan (OSS) wrote: > @@ -879,16 +874,12 @@ static int ti_iodelay_probe(struct platform_device *pdev) > ret = pinctrl_register_and_init(&iod->desc, dev, iod, &iod->pctl); > if (ret) { > dev_err(dev, "Failed to register pinctrl\n"); > - goto exit_out; > + return ret; > } > > platform_set_drvdata(pdev, iod); > > return pinctrl_enable(iod->pctl); > - > -exit_out: > - of_node_put(np); > - return ret; > } This will call of_node_put() on the success path so it's a behavior change. The original code is buggy, it's supposed to call of_node_put() on the success path here or in ti_iodelay_remove(). If it's supposed to call of_node_put() here, then fine, this is bugfix but if it's supposed to call it in ti_iodelay_remove() then we need to save the pointer somewhere using no_free_ptr(). Probably saving ->np is the safest choice? The original code is already a little bit buggy because it doesn't check for pinctrl_enable() errors and cleanup. diff --git a/drivers/pinctrl/ti/pinctrl-ti-iodelay.c b/drivers/pinctrl/ti/pinctrl-ti-iodelay.c index 040f2c46a868..f40a1476e4ff 100644 --- a/drivers/pinctrl/ti/pinctrl-ti-iodelay.c +++ b/drivers/pinctrl/ti/pinctrl-ti-iodelay.c @@ -156,6 +156,7 @@ struct ti_iodelay_device { const struct ti_iodelay_reg_data *reg_data; struct ti_iodelay_reg_values reg_init_conf_values; + struct device_node *np; }; /** @@ -884,7 +885,12 @@ static int ti_iodelay_probe(struct platform_device *pdev) platform_set_drvdata(pdev, iod); - return pinctrl_enable(iod->pctl); + ret = pinctrl_enable(iod->pctl); + if (ret) + goto exit_out; + + iod->np = no_free_ptr(np); + return 0; exit_out: of_node_put(np); @@ -903,6 +909,7 @@ static void ti_iodelay_remove(struct platform_device *pdev) pinctrl_unregister(iod->pctl); ti_iodelay_pinconf_deinit_dev(iod); + of_node_put(iod->np); /* Expect other allocations to be freed by devm */ }
> Subject: Re: [PATCH 01/21] pinctrl: ti: iodelay: Use scope based of_node_put() > cleanups > > On Wed, May 01, 2024 at 08:55:59PM +0800, Peng Fan (OSS) wrote: > > @@ -879,16 +874,12 @@ static int ti_iodelay_probe(struct > platform_device *pdev) > > ret = pinctrl_register_and_init(&iod->desc, dev, iod, &iod->pctl); > > if (ret) { > > dev_err(dev, "Failed to register pinctrl\n"); > > - goto exit_out; > > + return ret; > > } > > > > platform_set_drvdata(pdev, iod); > > > > return pinctrl_enable(iod->pctl); > > - > > -exit_out: > > - of_node_put(np); > > - return ret; > > } > > This will call of_node_put() on the success path so it's a behavior change. The > original code is buggy, it's supposed to call of_node_put() on the success path > here or in ti_iodelay_remove(). > > If it's supposed to call of_node_put() here, then fine, this is bugfix but if it's > supposed to call it in ti_iodelay_remove() then we need to save the pointer > somewhere using no_free_ptr(). Probably saving ->np is the safest choice? > > The original code is already a little bit buggy because it doesn't check for > pinctrl_enable() errors and cleanup. It was introduced by commit 6118714275f0a313ecc296a87ed1af32d9691bed (tag: pinctrl-v4.11-4) Author: Tony Lindgren <tony@atomide.com> Date: Thu Mar 30 09:16:39 2017 -0700 pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable() of_node_put is expected in probe, not in remove. Thanks, Peng. > > > diff --git a/drivers/pinctrl/ti/pinctrl-ti-iodelay.c b/drivers/pinctrl/ti/pinctrl-ti- > iodelay.c > index 040f2c46a868..f40a1476e4ff 100644 > --- a/drivers/pinctrl/ti/pinctrl-ti-iodelay.c > +++ b/drivers/pinctrl/ti/pinctrl-ti-iodelay.c > @@ -156,6 +156,7 @@ struct ti_iodelay_device { > > const struct ti_iodelay_reg_data *reg_data; > struct ti_iodelay_reg_values reg_init_conf_values; > + struct device_node *np; > }; > > /** > @@ -884,7 +885,12 @@ static int ti_iodelay_probe(struct platform_device > *pdev) > > platform_set_drvdata(pdev, iod); > > - return pinctrl_enable(iod->pctl); > + ret = pinctrl_enable(iod->pctl); > + if (ret) > + goto exit_out; > + > + iod->np = no_free_ptr(np); > + return 0; > > exit_out: > of_node_put(np); > @@ -903,6 +909,7 @@ static void ti_iodelay_remove(struct platform_device > *pdev) > pinctrl_unregister(iod->pctl); > > ti_iodelay_pinconf_deinit_dev(iod); > + of_node_put(iod->np); > > /* Expect other allocations to be freed by devm */ } > > >
On Thu, May 02, 2024 at 12:28:42AM +0000, Peng Fan wrote: > > Subject: Re: [PATCH 01/21] pinctrl: ti: iodelay: Use scope based of_node_put() > > cleanups > > > > On Wed, May 01, 2024 at 08:55:59PM +0800, Peng Fan (OSS) wrote: > > > @@ -879,16 +874,12 @@ static int ti_iodelay_probe(struct > > platform_device *pdev) > > > ret = pinctrl_register_and_init(&iod->desc, dev, iod, &iod->pctl); > > > if (ret) { > > > dev_err(dev, "Failed to register pinctrl\n"); > > > - goto exit_out; > > > + return ret; > > > } > > > > > > platform_set_drvdata(pdev, iod); > > > > > > return pinctrl_enable(iod->pctl); > > > - > > > -exit_out: > > > - of_node_put(np); > > > - return ret; > > > } > > > > This will call of_node_put() on the success path so it's a behavior change. The > > original code is buggy, it's supposed to call of_node_put() on the success path > > here or in ti_iodelay_remove(). > > > > If it's supposed to call of_node_put() here, then fine, this is bugfix but if it's > > supposed to call it in ti_iodelay_remove() then we need to save the pointer > > somewhere using no_free_ptr(). Probably saving ->np is the safest choice? > > > > The original code is already a little bit buggy because it doesn't check for > > pinctrl_enable() errors and cleanup. > > It was introduced by > commit 6118714275f0a313ecc296a87ed1af32d9691bed (tag: pinctrl-v4.11-4) > Author: Tony Lindgren <tony@atomide.com> > Date: Thu Mar 30 09:16:39 2017 -0700 > > pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable() > > of_node_put is expected in probe, not in remove. > Ah, right. You'll add that for the Fixes tag obviously... regards, dan carpenter
diff --git a/drivers/pinctrl/ti/pinctrl-ti-iodelay.c b/drivers/pinctrl/ti/pinctrl-ti-iodelay.c index 040f2c46a868..1032bc9c36aa 100644 --- a/drivers/pinctrl/ti/pinctrl-ti-iodelay.c +++ b/drivers/pinctrl/ti/pinctrl-ti-iodelay.c @@ -822,53 +822,48 @@ MODULE_DEVICE_TABLE(of, ti_iodelay_of_match); static int ti_iodelay_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct device_node *np = of_node_get(dev->of_node); + struct device_node *np __free(device_node) = of_node_get(dev->of_node); struct resource *res; struct ti_iodelay_device *iod; - int ret = 0; + int ret; if (!np) { - ret = -EINVAL; dev_err(dev, "No OF node\n"); - goto exit_out; + return -EINVAL; } iod = devm_kzalloc(dev, sizeof(*iod), GFP_KERNEL); - if (!iod) { - ret = -ENOMEM; - goto exit_out; - } + if (!iod) + return -ENOMEM; + iod->dev = dev; iod->reg_data = device_get_match_data(dev); if (!iod->reg_data) { - ret = -EINVAL; dev_err(dev, "No DATA match\n"); - goto exit_out; + return -EINVAL; } /* So far We can assume there is only 1 bank of registers */ iod->reg_base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); - if (IS_ERR(iod->reg_base)) { - ret = PTR_ERR(iod->reg_base); - goto exit_out; - } + if (IS_ERR(iod->reg_base)) + return PTR_ERR(iod->reg_base); + iod->phys_base = res->start; iod->regmap = devm_regmap_init_mmio(dev, iod->reg_base, iod->reg_data->regmap_config); if (IS_ERR(iod->regmap)) { dev_err(dev, "Regmap MMIO init failed.\n"); - ret = PTR_ERR(iod->regmap); - goto exit_out; + return PTR_ERR(iod->regmap); } ret = ti_iodelay_pinconf_init_dev(iod); if (ret) - goto exit_out; + return ret; ret = ti_iodelay_alloc_pins(dev, iod, res->start); if (ret) - goto exit_out; + return ret; iod->desc.pctlops = &ti_iodelay_pinctrl_ops; /* no pinmux ops - we are pinconf */ @@ -879,16 +874,12 @@ static int ti_iodelay_probe(struct platform_device *pdev) ret = pinctrl_register_and_init(&iod->desc, dev, iod, &iod->pctl); if (ret) { dev_err(dev, "Failed to register pinctrl\n"); - goto exit_out; + return ret; } platform_set_drvdata(pdev, iod); return pinctrl_enable(iod->pctl); - -exit_out: - of_node_put(np); - return ret; } /**