| Message ID | 20240506142142.4042810-5-andriy.shevchenko@linux.intel.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | PCI: controller: Move to agnostic GPIO API | expand |
On Mon, May 06, 2024 at 05:20:40PM +0300, Andy Shevchenko wrote: > The of_gpio.h is going to be removed. In preparation of that convert > the driver to the agnostic API. > > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > Reviewed-by: Frank Li <Frank.Li@nxp.com> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > --- Can I include your patch in my imx6 pci improvement patches https://lore.kernel.org/linux-pci/20240507-pci2_upstream-v4-0-e8c80d874057@nxp.com/T/#t There is patch, which rename function from imx6 -> imx. That will avoid conflict. Frank Li > drivers/pci/controller/dwc/pci-imx6.c | 36 ++++++++------------------- > 1 file changed, 10 insertions(+), 26 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c > index 917c69edee1d..62a4994c5501 100644 > --- a/drivers/pci/controller/dwc/pci-imx6.c > +++ b/drivers/pci/controller/dwc/pci-imx6.c > @@ -11,14 +11,13 @@ > #include <linux/bitfield.h> > #include <linux/clk.h> > #include <linux/delay.h> > -#include <linux/gpio.h> > +#include <linux/gpio/consumer.h> > #include <linux/kernel.h> > #include <linux/mfd/syscon.h> > #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> > #include <linux/mfd/syscon/imx7-iomuxc-gpr.h> > #include <linux/module.h> > #include <linux/of.h> > -#include <linux/of_gpio.h> > #include <linux/of_address.h> > #include <linux/pci.h> > #include <linux/platform_device.h> > @@ -107,8 +106,7 @@ struct imx6_pcie_drvdata { > > struct imx6_pcie { > struct dw_pcie *pci; > - int reset_gpio; > - bool gpio_active_high; > + struct gpio_desc *reset_gpiod; > bool link_is_up; > struct clk_bulk_data clks[IMX6_PCIE_MAX_CLKS]; > struct regmap *iomuxc_gpr; > @@ -721,9 +719,7 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie) > } > > /* Some boards don't have PCIe reset GPIO. */ > - if (gpio_is_valid(imx6_pcie->reset_gpio)) > - gpio_set_value_cansleep(imx6_pcie->reset_gpio, > - imx6_pcie->gpio_active_high); > + gpiod_set_value_cansleep(imx6_pcie->reset_gpiod, 1); > } > > static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) > @@ -771,10 +767,9 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) > } > > /* Some boards don't have PCIe reset GPIO. */ > - if (gpio_is_valid(imx6_pcie->reset_gpio)) { > + if (imx6_pcie->reset_gpiod) { > msleep(100); > - gpio_set_value_cansleep(imx6_pcie->reset_gpio, > - !imx6_pcie->gpio_active_high); > + gpiod_set_value_cansleep(imx6_pcie->reset_gpiod, 0); > /* Wait for 100ms after PERST# deassertion (PCIe r5.0, 6.6.1) */ > msleep(100); > } > @@ -1285,22 +1280,11 @@ static int imx6_pcie_probe(struct platform_device *pdev) > return PTR_ERR(pci->dbi_base); > > /* Fetch GPIOs */ > - imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0); > - imx6_pcie->gpio_active_high = of_property_read_bool(node, > - "reset-gpio-active-high"); > - if (gpio_is_valid(imx6_pcie->reset_gpio)) { > - ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio, > - imx6_pcie->gpio_active_high ? > - GPIOF_OUT_INIT_HIGH : > - GPIOF_OUT_INIT_LOW, > - "PCIe reset"); > - if (ret) { > - dev_err(dev, "unable to get reset gpio\n"); > - return ret; > - } > - } else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) { > - return imx6_pcie->reset_gpio; > - } > + imx6_pcie->reset_gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); > + if (IS_ERR(imx6_pcie->reset_gpiod)) > + return dev_err_probe(dev, PTR_ERR(imx6_pcie->reset_gpiod), > + "unable to get reset gpio\n"); > + gpiod_set_consumer_name(imx6_pcie->reset_gpiod, "PCIe reset"); > > if (imx6_pcie->drvdata->clks_cnt >= IMX6_PCIE_MAX_CLKS) > return dev_err_probe(dev, -ENOMEM, "clks_cnt is too big\n"); > -- > 2.43.0.rc1.1336.g36b5255a03ac >
Tue, May 07, 2024 at 03:22:33PM -0400, Frank Li kirjoitti: > On Mon, May 06, 2024 at 05:20:40PM +0300, Andy Shevchenko wrote: > > The of_gpio.h is going to be removed. In preparation of that convert > > the driver to the agnostic API. ... > Can I include your patch in my imx6 pci improvement patches > https://lore.kernel.org/linux-pci/20240507-pci2_upstream-v4-0-e8c80d874057@nxp.com/T/#t > > There is patch, which rename function from imx6 -> imx. That will avoid > conflict. You can, of course, but it will be not my decision to make. Ask PCI maintainers who is supposed to take this series.
Thu, May 09, 2024 at 01:24:45AM +0000, Hongxing Zhu kirjoitti: > > -----Original Message----- > > From: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > > Sent: 2024年5月6日 22:21 ... > > - imx6_pcie->gpio_active_high = of_property_read_bool(node, > > - "reset-gpio-active-high"); > > - if (gpio_is_valid(imx6_pcie->reset_gpio)) { > > - ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio, > > - imx6_pcie->gpio_active_high ? > > - GPIOF_OUT_INIT_HIGH : > > - GPIOF_OUT_INIT_LOW, > > - "PCIe reset"); > > - if (ret) { > > - dev_err(dev, "unable to get reset gpio\n"); > > - return ret; > > - } > > - } else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) { > > - return imx6_pcie->reset_gpio; > > - } > Please correct me if my understand is wrong. > The "reset-gpio-active-high" property is added for some buggy board designs. > On these buggy boards, the reset gpio is active high. This is my understanding too. > In the other words, the PERST# is active and remote endpoint device would > be in reset stat when this gpio is high on these buggy boards. Yes. > I'm afraid that the PCIe would be broken on these boards, If these codes > are removed totally, No. Linus W. explained in the previous version review round how it's supposed to work. > and toggle the reset GPIO pin like below. > ... > gpio_set_value_cansleep(imx6_pcie->reset_gpio, 0); > msleep(100); > gpio_set_value_cansleep(imx6_pcie->reset_gpio, 1); > ... It's not the code that this patch adds. I'm not sure if I understand starting from here what you mean. > By the way, this reset GPIO pin should be high at end in > imx6_pcie_deassert_core_reset() if the imx6_pcie->gpio_active_high is zero. This seems a terminology mixup. You probably meant "inactive". And this is exactly the case with this patch. If you start thinking in terms of "active"/"inactive" you will see that there is no contradiction and no behaviour change. The quirk itself is located in gpiolib-of.c..
On Mon, May 6, 2024 at 4:21 PM Andy Shevchenko <andriy.shevchenko@linux.intel.com> wrote: > The of_gpio.h is going to be removed. In preparation of that convert > the driver to the agnostic API. > > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > Reviewed-by: Frank Li <Frank.Li@nxp.com> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Would maybe mention in the commit that the quirk to gpiolib is already in place (people are already confused by it) but no big deal. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 917c69edee1d..62a4994c5501 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -11,14 +11,13 @@ #include <linux/bitfield.h> #include <linux/clk.h> #include <linux/delay.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/kernel.h> #include <linux/mfd/syscon.h> #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> #include <linux/mfd/syscon/imx7-iomuxc-gpr.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/of_address.h> #include <linux/pci.h> #include <linux/platform_device.h> @@ -107,8 +106,7 @@ struct imx6_pcie_drvdata { struct imx6_pcie { struct dw_pcie *pci; - int reset_gpio; - bool gpio_active_high; + struct gpio_desc *reset_gpiod; bool link_is_up; struct clk_bulk_data clks[IMX6_PCIE_MAX_CLKS]; struct regmap *iomuxc_gpr; @@ -721,9 +719,7 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie) } /* Some boards don't have PCIe reset GPIO. */ - if (gpio_is_valid(imx6_pcie->reset_gpio)) - gpio_set_value_cansleep(imx6_pcie->reset_gpio, - imx6_pcie->gpio_active_high); + gpiod_set_value_cansleep(imx6_pcie->reset_gpiod, 1); } static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) @@ -771,10 +767,9 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) } /* Some boards don't have PCIe reset GPIO. */ - if (gpio_is_valid(imx6_pcie->reset_gpio)) { + if (imx6_pcie->reset_gpiod) { msleep(100); - gpio_set_value_cansleep(imx6_pcie->reset_gpio, - !imx6_pcie->gpio_active_high); + gpiod_set_value_cansleep(imx6_pcie->reset_gpiod, 0); /* Wait for 100ms after PERST# deassertion (PCIe r5.0, 6.6.1) */ msleep(100); } @@ -1285,22 +1280,11 @@ static int imx6_pcie_probe(struct platform_device *pdev) return PTR_ERR(pci->dbi_base); /* Fetch GPIOs */ - imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0); - imx6_pcie->gpio_active_high = of_property_read_bool(node, - "reset-gpio-active-high"); - if (gpio_is_valid(imx6_pcie->reset_gpio)) { - ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio, - imx6_pcie->gpio_active_high ? - GPIOF_OUT_INIT_HIGH : - GPIOF_OUT_INIT_LOW, - "PCIe reset"); - if (ret) { - dev_err(dev, "unable to get reset gpio\n"); - return ret; - } - } else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) { - return imx6_pcie->reset_gpio; - } + imx6_pcie->reset_gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(imx6_pcie->reset_gpiod)) + return dev_err_probe(dev, PTR_ERR(imx6_pcie->reset_gpiod), + "unable to get reset gpio\n"); + gpiod_set_consumer_name(imx6_pcie->reset_gpiod, "PCIe reset"); if (imx6_pcie->drvdata->clks_cnt >= IMX6_PCIE_MAX_CLKS) return dev_err_probe(dev, -ENOMEM, "clks_cnt is too big\n");