diff mbox series

[v2,7/7] ARM: dts: samsung: exynos4212-tab3: Fix up wm1811 codec config

Message ID 20240508-midas-wm1811-gpio-jack-v2-7-b4d36cd02c6e@gmail.com (mailing list archive)
State New, archived
Headers show
Series ASoC: samsung: midas-audio: Add GPIO-based headset jack detection | expand

Commit Message

Artur Weber May 8, 2024, 10:58 a.m. UTC
Drop incorrect interrupt parent and add MCLK2 clock.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
Changes in v2:
- Split out wm1811 changes from midas-audio config change patch
---
 arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

Comments

Krzysztof Kozlowski May 9, 2024, 7:13 a.m. UTC | #1
On 08/05/2024 12:58, Artur Weber wrote:
> Drop incorrect interrupt parent and add MCLK2 clock.

1. Separate patches.
2. Missing explanation why. "Incorrect" says a bit, but not too much.
Also, imprecise - you remove all interrupts, not just incorrect parent.

Please provide proper rationale, why this is not correct and information
that bluetooth 32 kHz clock feeds both bluetooth module and audio codec.

> 

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
index 8dc81112172c..20e5e7ba6b92 100644
--- a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
@@ -529,12 +529,11 @@  &i2c_4 {
 	wm1811: audio-codec@1a {
 		compatible = "wlf,wm1811";
 		reg = <0x1a>;
-		clocks = <&pmu_system_controller 0>;
-		clock-names = "MCLK1";
+		clocks = <&pmu_system_controller 0>,
+			 <&s5m8767_osc S2MPS11_CLK_BT>;
+		clock-names = "MCLK1", "MCLK2";
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
 
 		gpio-controller;
 		#gpio-cells = <2>;