| Message ID | 20240511214739.242950-1-shenxiaxi26@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | ASoC: dt-bindings: ssm2602: convert to dt schema | expand |
On Sat, 11 May 2024 14:47:39 -0700, Xiaxi Shen wrote: > Convert adi,ssm2602 binding to DT schema > > The original adi,ssm2602.txt contains bindings for 3 devices > SSM2602, SSM2603 and SSM2604. Since they share something > in common. So I created one single yaml and name it 260x instead. > Let me know if you think it should be done in another way. > > It passed dt_binding_check and dtbs_check. > > Signed-off-by: Xiaxi Shen <shenxiaxi26@gmail.com> > --- > .../devicetree/bindings/sound/adi,ssm2602.txt | 19 ------- > .../bindings/sound/adi,ssm260x.yaml | 50 +++++++++++++++++++ > 2 files changed, 50 insertions(+), 19 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/sound/adi,ssm2602.txt > create mode 100644 Documentation/devicetree/bindings/sound/adi,ssm260x.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/adi,ssm260x.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename $id: http://devicetree.org/schemas/sound/adi,ssm2602.yaml file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/adi,ssm260x.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240511214739.242950-1-shenxiaxi26@gmail.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/sound/adi,ssm2602.txt b/Documentation/devicetree/bindings/sound/adi,ssm2602.txt deleted file mode 100644 index 3b3302fe399b..000000000000 --- a/Documentation/devicetree/bindings/sound/adi,ssm2602.txt +++ /dev/null @@ -1,19 +0,0 @@ -Analog Devices SSM2602, SSM2603 and SSM2604 I2S audio CODEC devices - -SSM2602 support both I2C and SPI as the configuration interface, -the selection is made by the MODE strap-in pin. -SSM2603 and SSM2604 only support I2C as the configuration interface. - -Required properties: - - - compatible : One of "adi,ssm2602", "adi,ssm2603" or "adi,ssm2604" - - - reg : the I2C address of the device for I2C, the chip select - number for SPI. - - Example: - - ssm2602: ssm2602@1a { - compatible = "adi,ssm2602"; - reg = <0x1a>; - }; diff --git a/Documentation/devicetree/bindings/sound/adi,ssm260x.yaml b/Documentation/devicetree/bindings/sound/adi,ssm260x.yaml new file mode 100644 index 000000000000..f465f9168a0a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,ssm260x.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,ssm2602.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices SSM2602, SSM2603 and SSM2604 I2S audio CODEC devices + +description: + SSM2602 support both I2C and SPI as the configuration interface, + + the selection is made by the MODE strap-in pin. + + SSM2603 and SSM2604 only support I2C as the configuration interface. + +maintainers: + - Liam Girdwood <lgirdwood@gmail.com> + - Mark Brown <broonie@kernel.org> + - Rob Herring <robh@kernel.org> + - Krzysztof Kozlowski <krzk+dt@kernel.org> + - Conor Dooley <conor+dt@kernel.org> + +properties: + compatible: + description: One of "adi,ssm2602", "adi,ssm2603" or "adi,ssm2604" + enum: + - adi,ssm2602 + - adi,ssm2603 + - adi,ssm2604 + + reg: + description: the I2C address of the device for I2C, the chip select number for SPI. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + ssm2602@1a { + compatible = "adi,ssm2602"; + reg = <0x1a>; + }; + };
Convert adi,ssm2602 binding to DT schema The original adi,ssm2602.txt contains bindings for 3 devices SSM2602, SSM2603 and SSM2604. Since they share something in common. So I created one single yaml and name it 260x instead. Let me know if you think it should be done in another way. It passed dt_binding_check and dtbs_check. Signed-off-by: Xiaxi Shen <shenxiaxi26@gmail.com> --- .../devicetree/bindings/sound/adi,ssm2602.txt | 19 ------- .../bindings/sound/adi,ssm260x.yaml | 50 +++++++++++++++++++ 2 files changed, 50 insertions(+), 19 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/adi,ssm2602.txt create mode 100644 Documentation/devicetree/bindings/sound/adi,ssm260x.yaml