| Message ID | 1716286416-17621-2-git-send-email-shengjiu.wang@nxp.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | ASoC: fsl_xcvr: Support i.MX95 platform | expand |
On Tue, May 21, 2024 at 06:13:35PM +0800, Shengjiu Wang wrote: > Add compatible string "fsl,imx95-xcvr" for i.MX95 platform. > > The difference between each platform is in below table. > > +---------+--------+----------+--------+ > | SOC | PHY | eARC/ARC | SPDIF | > +---------+--------+----------+--------+ > | i.MX8MP | V1 | Yes | Yes | > +---------+--------+----------+--------+ > | i.MX93 | N/A | N/A | Yes | > +---------+--------+----------+--------+ > | i.MX95 | V2 | N/A | Yes | > +---------+--------+----------+--------+ > > On i.MX95, there are two PLL clock sources, they are the parent > clocks of the XCVR root clock. one is for 8kHz series rates, named > as 'pll8k', another one is for 11kHz series rates, named as 'pll11k'. > They are optional clocks, if there are such clocks, then the driver > can switch between them to support more accurate sample rates. > > As 'pll8k' and 'pll11k' are optional, then add 'minItems: 4' for > clocks and clock-names properties. > > On i.MX95, the 'interrupts' configuration has the same constraint > as i.MX93. > > Only on i.MX8MP, the 'resets' is required, but for i.MX95 and i.MX93 > there is no such hardware setting. > > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> > --- > .../devicetree/bindings/sound/fsl,xcvr.yaml | 37 ++++++++++++++++++- > 1 file changed, 36 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml > index 0eb0c1ba8710..d1dcc27655eb 100644 > --- a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml > +++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml > @@ -22,6 +22,7 @@ properties: > enum: > - fsl,imx8mp-xcvr > - fsl,imx93-xcvr > + - fsl,imx95-xcvr > > reg: > items: > @@ -49,6 +50,9 @@ properties: > - description: PHY clock > - description: SPBA clock > - description: PLL clock > + - description: PLL clock source for 8kHz series > + - description: PLL clock source for 11kHz series > + minItems: 4 > > clock-names: > items: > @@ -56,6 +60,9 @@ properties: > - const: phy > - const: spba > - const: pll_ipg > + - const: pll8k > + - const: pll11k > + minItems: 4 > > dmas: > items: > @@ -79,15 +86,24 @@ required: > - clock-names > - dmas > - dma-names > - - resets > > allOf: > + - if: > + properties: > + compatible: > + contains: > + const: fsl,imx8mp-xcvr > + then: > + required: > + - resets > + > - if: > properties: > compatible: > contains: > enum: > - fsl,imx93-xcvr > + - fsl,imx95-xcvr > then: > properties: > interrupts: > @@ -98,6 +114,25 @@ allOf: > interrupts: > maxItems: 1 > > + - if: > + properties: > + compatible: > + contains: > + enum: > + - fsl,imx95-xcvr > + then: > + properties: > + clocks: > + maxItems: 6 > + clock-names: > + maxItems: 6 6 is already the max. Drop these and add a 'not' into the if schema (or list out the other compatibles). > + else: > + properties: > + clocks: > + maxItems: 4 > + clock-names: > + maxItems: 4 > + > additionalProperties: false > > examples: > -- > 2.34.1 >
On Tue, May 28, 2024 at 11:15 PM Rob Herring <robh@kernel.org> wrote: > > On Tue, May 21, 2024 at 06:13:35PM +0800, Shengjiu Wang wrote: > > Add compatible string "fsl,imx95-xcvr" for i.MX95 platform. > > > > The difference between each platform is in below table. > > > > +---------+--------+----------+--------+ > > | SOC | PHY | eARC/ARC | SPDIF | > > +---------+--------+----------+--------+ > > | i.MX8MP | V1 | Yes | Yes | > > +---------+--------+----------+--------+ > > | i.MX93 | N/A | N/A | Yes | > > +---------+--------+----------+--------+ > > | i.MX95 | V2 | N/A | Yes | > > +---------+--------+----------+--------+ > > > > On i.MX95, there are two PLL clock sources, they are the parent > > clocks of the XCVR root clock. one is for 8kHz series rates, named > > as 'pll8k', another one is for 11kHz series rates, named as 'pll11k'. > > They are optional clocks, if there are such clocks, then the driver > > can switch between them to support more accurate sample rates. > > > > As 'pll8k' and 'pll11k' are optional, then add 'minItems: 4' for > > clocks and clock-names properties. > > > > On i.MX95, the 'interrupts' configuration has the same constraint > > as i.MX93. > > > > Only on i.MX8MP, the 'resets' is required, but for i.MX95 and i.MX93 > > there is no such hardware setting. > > > > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> > > --- > > .../devicetree/bindings/sound/fsl,xcvr.yaml | 37 ++++++++++++++++++- > > 1 file changed, 36 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml > > index 0eb0c1ba8710..d1dcc27655eb 100644 > > --- a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml > > +++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml > > @@ -22,6 +22,7 @@ properties: > > enum: > > - fsl,imx8mp-xcvr > > - fsl,imx93-xcvr > > + - fsl,imx95-xcvr > > > > reg: > > items: > > @@ -49,6 +50,9 @@ properties: > > - description: PHY clock > > - description: SPBA clock > > - description: PLL clock > > + - description: PLL clock source for 8kHz series > > + - description: PLL clock source for 11kHz series > > + minItems: 4 > > > > clock-names: > > items: > > @@ -56,6 +60,9 @@ properties: > > - const: phy > > - const: spba > > - const: pll_ipg > > + - const: pll8k > > + - const: pll11k > > + minItems: 4 > > > > dmas: > > items: > > @@ -79,15 +86,24 @@ required: > > - clock-names > > - dmas > > - dma-names > > - - resets > > > > allOf: > > + - if: > > + properties: > > + compatible: > > + contains: > > + const: fsl,imx8mp-xcvr > > + then: > > + required: > > + - resets > > + > > - if: > > properties: > > compatible: > > contains: > > enum: > > - fsl,imx93-xcvr > > + - fsl,imx95-xcvr > > then: > > properties: > > interrupts: > > @@ -98,6 +114,25 @@ allOf: > > interrupts: > > maxItems: 1 > > > > + - if: > > + properties: > > + compatible: > > + contains: > > + enum: > > + - fsl,imx95-xcvr > > + then: > > + properties: > > + clocks: > > + maxItems: 6 > > + clock-names: > > + maxItems: 6 > > 6 is already the max. Drop these and add a 'not' into the if schema (or > list out the other compatibles). Ok, will update it. best regards Shengjiu Wang > > > + else: > > + properties: > > + clocks: > > + maxItems: 4 > > + clock-names: > > + maxItems: 4 > > + > > additionalProperties: false > > > > examples: > > -- > > 2.34.1 > >
diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml index 0eb0c1ba8710..d1dcc27655eb 100644 --- a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml @@ -22,6 +22,7 @@ properties: enum: - fsl,imx8mp-xcvr - fsl,imx93-xcvr + - fsl,imx95-xcvr reg: items: @@ -49,6 +50,9 @@ properties: - description: PHY clock - description: SPBA clock - description: PLL clock + - description: PLL clock source for 8kHz series + - description: PLL clock source for 11kHz series + minItems: 4 clock-names: items: @@ -56,6 +60,9 @@ properties: - const: phy - const: spba - const: pll_ipg + - const: pll8k + - const: pll11k + minItems: 4 dmas: items: @@ -79,15 +86,24 @@ required: - clock-names - dmas - dma-names - - resets allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8mp-xcvr + then: + required: + - resets + - if: properties: compatible: contains: enum: - fsl,imx93-xcvr + - fsl,imx95-xcvr then: properties: interrupts: @@ -98,6 +114,25 @@ allOf: interrupts: maxItems: 1 + - if: + properties: + compatible: + contains: + enum: + - fsl,imx95-xcvr + then: + properties: + clocks: + maxItems: 6 + clock-names: + maxItems: 6 + else: + properties: + clocks: + maxItems: 4 + clock-names: + maxItems: 4 + additionalProperties: false examples:
Add compatible string "fsl,imx95-xcvr" for i.MX95 platform. The difference between each platform is in below table. +---------+--------+----------+--------+ | SOC | PHY | eARC/ARC | SPDIF | +---------+--------+----------+--------+ | i.MX8MP | V1 | Yes | Yes | +---------+--------+----------+--------+ | i.MX93 | N/A | N/A | Yes | +---------+--------+----------+--------+ | i.MX95 | V2 | N/A | Yes | +---------+--------+----------+--------+ On i.MX95, there are two PLL clock sources, they are the parent clocks of the XCVR root clock. one is for 8kHz series rates, named as 'pll8k', another one is for 11kHz series rates, named as 'pll11k'. They are optional clocks, if there are such clocks, then the driver can switch between them to support more accurate sample rates. As 'pll8k' and 'pll11k' are optional, then add 'minItems: 4' for clocks and clock-names properties. On i.MX95, the 'interrupts' configuration has the same constraint as i.MX93. Only on i.MX8MP, the 'resets' is required, but for i.MX95 and i.MX93 there is no such hardware setting. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> --- .../devicetree/bindings/sound/fsl,xcvr.yaml | 37 ++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-)