| Message ID | 20240529-rockchip-pcie-ep-v1-v4-12-3dc00fe21a78@kernel.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | PCI: dw-rockchip: Add endpoint mode support | expand |
On Wed, May 29, 2024 at 10:29:06AM +0200, Niklas Cassel wrote: > Add a device tree node representing PCIe endpoint mode. > > The controller can either be configured to run in Root Complex or Endpoint > node. > > If a user wants to run the controller in endpoint mode, the user has to > disable the pcie3x4 node and enable the pcie3x4_ep node. > > Signed-off-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> One nitpick below. > --- > arch/arm64/boot/dts/rockchip/rk3588.dtsi | 35 ++++++++++++++++++++++++++++++++ > 1 file changed, 35 insertions(+) > > diff --git a/arch/arm64/boot/dts/rockchip/rk3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588.dtsi > index 5984016b5f96..6b5bf1055143 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3588.dtsi > +++ b/arch/arm64/boot/dts/rockchip/rk3588.dtsi > @@ -186,6 +186,41 @@ pcie3x4_intc: legacy-interrupt-controller { > }; > }; > > + pcie3x4_ep: pcie-ep@fe150000 { > + compatible = "rockchip,rk3588-pcie-ep"; > + clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>, > + <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>, > + <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>; > + clock-names = "aclk_mst", "aclk_slv", > + "aclk_dbi", "pclk", > + "aux", "pipe"; > + interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>, > + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>, > + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>, > + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>, > + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>, > + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH 0>, > + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>, > + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH 0>, > + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH 0>; > + interrupt-names = "sys", "pmc", "msg", "legacy", "err", > + "dma0", "dma1", "dma2", "dma3"; > + max-link-speed = <3>; > + num-lanes = <4>; > + phys = <&pcie30phy>; > + phy-names = "pcie-phy"; > + power-domains = <&power RK3588_PD_PCIE>; > + reg = <0xa 0x40000000 0x0 0x00100000>, > + <0xa 0x40100000 0x0 0x00100000>, > + <0x0 0xfe150000 0x0 0x00010000>, > + <0x9 0x00000000 0x0 0x40000000>, > + <0xa 0x40300000 0x0 0x00100000>; > + reg-names = "dbi", "dbi2", "apb", "addr_space", "atu"; As suggested in the bindings patch, please move these reg properties below compatible. - Mani > + resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>; > + reset-names = "pwr", "pipe"; > + status = "disabled"; > + }; > + > pcie3x2: pcie@fe160000 { > compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; > #address-cells = <3>; > > -- > 2.45.1 >
diff --git a/arch/arm64/boot/dts/rockchip/rk3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588.dtsi index 5984016b5f96..6b5bf1055143 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588.dtsi @@ -186,6 +186,41 @@ pcie3x4_intc: legacy-interrupt-controller { }; }; + pcie3x4_ep: pcie-ep@fe150000 { + compatible = "rockchip,rk3588-pcie-ep"; + clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>, + <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>, + <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux", "pipe"; + interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "sys", "pmc", "msg", "legacy", "err", + "dma0", "dma1", "dma2", "dma3"; + max-link-speed = <3>; + num-lanes = <4>; + phys = <&pcie30phy>; + phy-names = "pcie-phy"; + power-domains = <&power RK3588_PD_PCIE>; + reg = <0xa 0x40000000 0x0 0x00100000>, + <0xa 0x40100000 0x0 0x00100000>, + <0x0 0xfe150000 0x0 0x00010000>, + <0x9 0x00000000 0x0 0x40000000>, + <0xa 0x40300000 0x0 0x00100000>; + reg-names = "dbi", "dbi2", "apb", "addr_space", "atu"; + resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>; + reset-names = "pwr", "pipe"; + status = "disabled"; + }; + pcie3x2: pcie@fe160000 { compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; #address-cells = <3>;
Add a device tree node representing PCIe endpoint mode. The controller can either be configured to run in Root Complex or Endpoint node. If a user wants to run the controller in endpoint mode, the user has to disable the pcie3x4 node and enable the pcie3x4_ep node. Signed-off-by: Niklas Cassel <cassel@kernel.org> --- arch/arm64/boot/dts/rockchip/rk3588.dtsi | 35 ++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)