@@ -819,47 +819,52 @@ static int ravb_rx_gbeth(struct net_device *ndev, int budget, int q)
stats->rx_missed_errors++;
} else {
die_dt = desc->die_dt & 0xF0;
+ skb = ravb_get_skb_gbeth(ndev, entry, desc);
switch (die_dt) {
case DT_FSINGLE:
- skb = ravb_get_skb_gbeth(ndev, entry, desc);
+ case DT_FSTART:
+ /* Start of packet: Set initial data length. */
skb_put(skb, desc_len);
+
+ /* Save this skb if the packet spans multiple
+ * descriptors.
+ */
+ if (die_dt == DT_FSTART)
+ priv->rx_1st_skb = skb;
+ break;
+
+ case DT_FMID:
+ case DT_FEND:
+ /* Continuing a packet: Move data into the saved
+ * skb.
+ */
+ skb_copy_to_linear_data_offset(priv->rx_1st_skb,
+ priv->rx_1st_skb->len,
+ skb->data,
+ desc_len);
+ skb_put(priv->rx_1st_skb, desc_len);
+ dev_kfree_skb(skb);
+
+ /* Set skb to point at the whole packet so that
+ * we only need one code path for finishing a
+ * packet.
+ */
+ skb = priv->rx_1st_skb;
+ }
+
+ switch (die_dt) {
+ case DT_FSINGLE:
+ case DT_FEND:
+ /* Finishing a packet: Determine protocol &
+ * checksum, hand off to NAPI and update our
+ * stats.
+ */
skb->protocol = eth_type_trans(skb, ndev);
if (ndev->features & NETIF_F_RXCSUM)
ravb_rx_csum_gbeth(skb);
+ stats->rx_bytes += skb->len;
napi_gro_receive(&priv->napi[q], skb);
rx_packets++;
- stats->rx_bytes += desc_len;
- break;
- case DT_FSTART:
- priv->rx_1st_skb = ravb_get_skb_gbeth(ndev, entry, desc);
- skb_put(priv->rx_1st_skb, desc_len);
- break;
- case DT_FMID:
- skb = ravb_get_skb_gbeth(ndev, entry, desc);
- skb_copy_to_linear_data_offset(priv->rx_1st_skb,
- priv->rx_1st_skb->len,
- skb->data,
- desc_len);
- skb_put(priv->rx_1st_skb, desc_len);
- dev_kfree_skb(skb);
- break;
- case DT_FEND:
- skb = ravb_get_skb_gbeth(ndev, entry, desc);
- skb_copy_to_linear_data_offset(priv->rx_1st_skb,
- priv->rx_1st_skb->len,
- skb->data,
- desc_len);
- skb_put(priv->rx_1st_skb, desc_len);
- dev_kfree_skb(skb);
- priv->rx_1st_skb->protocol =
- eth_type_trans(priv->rx_1st_skb, ndev);
- if (ndev->features & NETIF_F_RXCSUM)
- ravb_rx_csum_gbeth(priv->rx_1st_skb);
- stats->rx_bytes += priv->rx_1st_skb->len;
- napi_gro_receive(&priv->napi[q],
- priv->rx_1st_skb);
- rx_packets++;
- break;
}
}
}
We can reduce code duplication in ravb_rx_gbeth(). Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> --- Changes v4->v5: * Re-wrapped to 80 cols, except where this would significantly impact readability. * Use lower case `skb` consistently in comments. Changes v3->v4: * Used switch statements instead of if statements in ravb_rx_gbeth(). drivers/net/ethernet/renesas/ravb_main.c | 71 +++++++++++++----------- 1 file changed, 38 insertions(+), 33 deletions(-)