diff mbox series

[1/3] arm64: dts: freescale: use defines for interrupts

Message ID 20240605153020.104717-1-krzysztof.kozlowski@linaro.org (mailing list archive)
State New, archived
Headers show
Series [1/3] arm64: dts: freescale: use defines for interrupts | expand

Commit Message

Krzysztof Kozlowski June 5, 2024, 3:30 p.m. UTC 
Replace hard-coded interrupt parts (GIC, flags) with standard defines
for readability.  No changes in resulting DTBs.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../arm64/boot/dts/freescale/fsl-ls1012a.dtsi |  54 +++----
 .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi |   6 +-
 .../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 108 +++++++-------
 .../arm64/boot/dts/freescale/fsl-ls1046a.dtsi |   2 +-
 .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi |  48 +++----
 .../arm64/boot/dts/freescale/fsl-ls2080a.dtsi |   2 +-
 .../arm64/boot/dts/freescale/fsl-ls2088a.dtsi |   2 +-
 .../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 136 +++++++++---------
 .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi |   4 +-
 9 files changed, 181 insertions(+), 181 deletions(-)

Comments

Peng Fan June 6, 2024, 1:36 a.m. UTC | #1 
> Subject: [PATCH 1/3] arm64: dts: freescale: use defines for interrupts
> 
> Replace hard-coded interrupt parts (GIC, flags) with standard defines for
> readability.  No changes in resulting DTBs.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Reviewed-by: Peng Fan <peng.fan@nxp.com>
> ---
>  .../arm64/boot/dts/freescale/fsl-ls1012a.dtsi |  54 +++----
>  .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi |   6 +-
>  .../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 108 +++++++-------
>  .../arm64/boot/dts/freescale/fsl-ls1046a.dtsi |   2 +-
>  .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi |  48 +++----
>  .../arm64/boot/dts/freescale/fsl-ls2080a.dtsi |   2 +-
>  .../arm64/boot/dts/freescale/fsl-ls2088a.dtsi |   2 +-
>  .../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 136 +++++++++---------
>  .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi |   4 +-
>  9 files changed, 181 insertions(+), 181 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> index a0f7bbd691a0..cfb77a76a240 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> @@ -74,15 +74,15 @@ coreclk: coreclk {
> 
>  	timer {
>  		compatible = "arm,armv8-timer";
> -		interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure
> PPI */
> -			     <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-
> Secure PPI */
> -			     <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
> -			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI
> */
> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,/* Physical
> Secure PPI */
> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,/* Physical
> Non-Secure PPI */
> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual
> PPI */
> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;/*
> Hypervisor PPI */
>  	};
> 
>  	pmu {
>  		compatible = "arm,cortex-a53-pmu";
> -		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
>  	};
> 
>  	gic: interrupt-controller@1400000 {
> @@ -93,7 +93,7 @@ gic: interrupt-controller@1400000 {
>  		      <0x0 0x1402000 0 0x2000>, /* GICC */
>  		      <0x0 0x1404000 0 0x2000>, /* GICH */
>  		      <0x0 0x1406000 0 0x2000>; /* GICV */
> -		interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>;
> +		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
>  	};
> 
>  	reboot {
> @@ -159,7 +159,7 @@ QORIQ_CLK_PLL_DIV(1)>,
>  		esdhc0: esdhc@1560000 {
>  			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
>  			reg = <0x0 0x1560000 0x0 0x10000>;
> -			interrupts = <0 62 0x4>;
> +			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
>  			voltage-ranges = <1800 1800 3300 3300>; @@ -
> 178,7 +178,7 @@ scfg: scfg@1570000 {
>  		esdhc1: esdhc@1580000 {
>  			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
>  			reg = <0x0 0x1580000 0x0 0x10000>;
> -			interrupts = <0 65 0x4>;
> +			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
>  			voltage-ranges = <1800 1800 3300 3300>; @@ -
> 305,7 +305,7 @@ clockgen: clocking@1ee1000 {
>  		tmu: tmu@1f00000 {
>  			compatible = "fsl,qoriq-tmu";
>  			reg = <0x0 0x1f00000 0x0 0x10000>;
> -			interrupts = <0 33 0x4>;
> +			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
>  			fsl,tmu-range = <0xb0000 0x9002a 0x6004c
> 0x60062>;
>  			fsl,tmu-calibration =
>  					<0x00000000 0x00000025>,
> @@ -355,7 +355,7 @@ i2c0: i2c@2180000 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			reg = <0x0 0x2180000 0x0 0x10000>;
> -			interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(4)>;
>  			scl-gpios = <&gpio0 2 0>;
> @@ -367,7 +367,7 @@ i2c1: i2c@2190000 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			reg = <0x0 0x2190000 0x0 0x10000>;
> -			interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(4)>;
>  			scl-gpios = <&gpio0 13 0>;
> @@ -379,7 +379,7 @@ dspi: spi@2100000 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			reg = <0x0 0x2100000 0x0 0x10000>;
> -			interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-names = "dspi";
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
> @@ -391,7 +391,7 @@ dspi: spi@2100000 {
>  		duart0: serial@21c0500 {
>  			compatible = "fsl,ns16550", "ns16550a";
>  			reg = <0x00 0x21c0500 0x0 0x100>;
> -			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
>  			status = "disabled";
> @@ -400,7 +400,7 @@ duart0: serial@21c0500 {
>  		duart1: serial@21c0600 {
>  			compatible = "fsl,ns16550", "ns16550a";
>  			reg = <0x00 0x21c0600 0x0 0x100>;
> -			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
>  			status = "disabled";
> @@ -409,7 +409,7 @@ duart1: serial@21c0600 {
>  		gpio0: gpio@2300000 {
>  			compatible = "fsl,qoriq-gpio";
>  			reg = <0x0 0x2300000 0x0 0x10000>;
> -			interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  			interrupt-controller;
> @@ -419,7 +419,7 @@ gpio0: gpio@2300000 {
>  		gpio1: gpio@2310000 {
>  			compatible = "fsl,qoriq-gpio";
>  			reg = <0x0 0x2310000 0x0 0x10000>;
> -			interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  			interrupt-controller;
> @@ -430,7 +430,7 @@ wdog0: watchdog@2ad0000 {
>  			compatible = "fsl,ls1012a-wdt",
>  				     "fsl,imx21-wdt";
>  			reg = <0x0 0x2ad0000 0x0 0x10000>;
> -			interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
>  			big-endian;
>  		};
> @@ -439,7 +439,7 @@ sai1: sai@2b50000 {
>  			#sound-dai-cells = <0>;
>  			compatible = "fsl,vf610-sai";
>  			reg = <0x0 0x2b50000 0x0 0x10000>;
> -			interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(4)>,
>  				 <&clockgen QORIQ_CLK_PLATFORM_PLL
> @@ -459,7 +459,7 @@ sai2: sai@2b60000 {
>  			#sound-dai-cells = <0>;
>  			compatible = "fsl,vf610-sai";
>  			reg = <0x0 0x2b60000 0x0 0x10000>;
> -			interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(4)>,
>  				 <&clockgen QORIQ_CLK_PLATFORM_PLL
> @@ -481,8 +481,8 @@ edma0: dma-controller@2c00000 {
>  			reg = <0x0 0x2c00000 0x0 0x10000>,
>  			      <0x0 0x2c10000 0x0 0x10000>,
>  			      <0x0 0x2c20000 0x0 0x10000>;
> -			interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>,
> -				     <0 103 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "edma-tx", "edma-err";
>  			dma-channels = <32>;
>  			big-endian;
> @@ -496,7 +496,7 @@ QORIQ_CLK_PLL_DIV(4)>,
>  		usb0: usb@2f00000 {
>  			compatible = "snps,dwc3";
>  			reg = <0x0 0x2f00000 0x0 0x10000>;
> -			interrupts = <0 60 0x4>;
> +			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
>  			dr_mode = "host";
>  			snps,quirk-frame-length-adjustment = <0x20>;
>  			snps,dis_rxdet_inp3_quirk;
> @@ -509,7 +509,7 @@ sata: sata@3200000 {
>  			reg = <0x0 0x3200000 0x0 0x10000>,
>  				<0x0 0x20140520 0x0 0x4>;
>  			reg-names = "ahci", "sata-ecc";
> -			interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
>  			dma-coherent;
> @@ -519,7 +519,7 @@ sata: sata@3200000 {
>  		usb1: usb@8600000 {
>  			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
>  			reg = <0x0 0x8600000 0x0 0x1000>;
> -			interrupts = <0 139 0x4>;
> +			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
>  			dr_mode = "host";
>  			phy_type = "ulpi";
>  		};
> @@ -528,7 +528,7 @@ msi: msi-controller1@1572000 {
>  			compatible = "fsl,ls1012a-msi";
>  			reg = <0x0 0x1572000 0x0 0x8>;
>  			msi-controller;
> -			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
>  		};
> 
>  		pcie1: pcie@3400000 {
> @@ -536,8 +536,8 @@ pcie1: pcie@3400000 {
>  			reg = <0x00 0x03400000 0x0 0x00100000>, /*
> controller registers */
>  			      <0x40 0x00000000 0x0 0x00002000>; /*
> configuration space */
>  			reg-names = "regs", "config";
> -			interrupts = <0 118 0x4>, /* controller interrupt */
> -				     <0 117 0x4>; /* PME interrupt */
> +			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> /* controller interrupt */
> +				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
> /* PME interrupt */
>  			interrupt-names = "aer", "pme";
>  			#address-cells = <3>;
>  			#size-cells = <2>;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 70b8731029c4..18aa02a0ebff 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -859,8 +859,8 @@ QORIQ_CLK_PLL_DIV(16)>,
>  		malidp0: display@f080000 {
>  			compatible = "arm,mali-dp500";
>  			reg = <0x0 0xf080000 0x0 0x10000>;
> -			interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
> -				     <0 223 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "DE", "SE";
>  			clocks = <&dpclk>,
>  				 <&clockgen QORIQ_CLK_HWACCEL 2>,
> @@ -1024,7 +1024,7 @@ dpclk: clock-controller@f1f0000 {
>  		tmu: tmu@1f80000 {
>  			compatible = "fsl,qoriq-tmu";
>  			reg = <0x0 0x1f80000 0x0 0x10000>;
> -			interrupts = <0 23 0x4>;
> +			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
>  			fsl,tmu-range = <0xb0000 0xa0026 0x80048
> 0x70061>;
>  			fsl,tmu-calibration =
>  					<0x00000000 0x00000024>,
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> index 8ee6d8c0ef61..1f5ae061e7e3 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> @@ -268,19 +268,19 @@ sec-crit {
> 
>  	timer {
>  		compatible = "arm,armv8-timer";
> -		interrupts = <1 13 0xf08>, /* Physical Secure PPI */
> -			     <1 14 0xf08>, /* Physical Non-Secure PPI */
> -			     <1 11 0xf08>, /* Virtual PPI */
> -			     <1 10 0xf08>; /* Hypervisor PPI */
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_LOW)>;
>  		fsl,erratum-a008585;
>  	};
> 
>  	pmu {
>  		compatible = "arm,cortex-a53-pmu";
> -		interrupts = <0 106 0x4>,
> -			     <0 107 0x4>,
> -			     <0 95 0x4>,
> -			     <0 97 0x4>;
> +		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
>  		interrupt-affinity = <&cpu0>,
>  				     <&cpu1>,
>  				     <&cpu2>,
> @@ -295,7 +295,7 @@ gic: interrupt-controller@1400000 {
>  		      <0x0 0x1402000 0 0x2000>, /* GICC */
>  		      <0x0 0x1404000 0 0x2000>, /* GICH */
>  		      <0x0 0x1406000 0 0x2000>; /* GICV */
> -		interrupts = <1 9 0xf08>;
> +		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
> +IRQ_TYPE_LEVEL_LOW)>;
>  	};
> 
>  	soc: soc {
> @@ -352,7 +352,7 @@ crypto: crypto@1700000 {
>  			#size-cells = <1>;
>  			ranges = <0x0 0x00 0x1700000 0x100000>;
>  			reg = <0x00 0x1700000 0x0 0x100000>;
> -			interrupts = <0 75 0x4>;
> +			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
>  			dma-coherent;
> 
>  			sec_jr0: jr@10000 {
> @@ -360,7 +360,7 @@ sec_jr0: jr@10000 {
>  					     "fsl,sec-v5.0-job-ring",
>  					     "fsl,sec-v4.0-job-ring";
>  				reg = <0x10000 0x10000>;
> -				interrupts = <0 71 0x4>;
> +				interrupts = <GIC_SPI 71
> IRQ_TYPE_LEVEL_HIGH>;
>  			};
> 
>  			sec_jr1: jr@20000 {
> @@ -368,7 +368,7 @@ sec_jr1: jr@20000 {
>  					     "fsl,sec-v5.0-job-ring",
>  					     "fsl,sec-v4.0-job-ring";
>  				reg = <0x20000 0x10000>;
> -				interrupts = <0 72 0x4>;
> +				interrupts = <GIC_SPI 72
> IRQ_TYPE_LEVEL_HIGH>;
>  			};
> 
>  			sec_jr2: jr@30000 {
> @@ -376,7 +376,7 @@ sec_jr2: jr@30000 {
>  					     "fsl,sec-v5.0-job-ring",
>  					     "fsl,sec-v4.0-job-ring";
>  				reg = <0x30000 0x10000>;
> -				interrupts = <0 73 0x4>;
> +				interrupts = <GIC_SPI 73
> IRQ_TYPE_LEVEL_HIGH>;
>  			};
> 
>  			sec_jr3: jr@40000 {
> @@ -384,7 +384,7 @@ sec_jr3: jr@40000 {
>  					     "fsl,sec-v5.0-job-ring",
>  					     "fsl,sec-v4.0-job-ring";
>  				reg = <0x40000 0x10000>;
> -				interrupts = <0 74 0x4>;
> +				interrupts = <GIC_SPI 74
> IRQ_TYPE_LEVEL_HIGH>;
>  			};
>  		};
> 
> @@ -405,7 +405,7 @@ dcfg: dcfg@1ee0000 {
>  		ifc: memory-controller@1530000 {
>  			compatible = "fsl,ifc";
>  			reg = <0x0 0x1530000 0x0 0x10000>;
> -			interrupts = <0 43 0x4>;
> +			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
>  		};
> 
>  		qspi: spi@1550000 {
> @@ -415,7 +415,7 @@ qspi: spi@1550000 {
>  			reg = <0x0 0x1550000 0x0 0x10000>,
>  				<0x0 0x40000000 0x0 0x4000000>;
>  			reg-names = "QuadSPI", "QuadSPI-memory";
> -			interrupts = <0 99 0x4>;
> +			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-names = "qspi_en", "qspi";
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>,
> @@ -427,7 +427,7 @@ QORIQ_CLK_PLL_DIV(1)>,
>  		esdhc: esdhc@1560000 {
>  			compatible = "fsl,ls1043a-esdhc", "fsl,esdhc";
>  			reg = <0x0 0x1560000 0x0 0x10000>;
> -			interrupts = <0 62 0x4>;
> +			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-frequency = <0>;
>  			voltage-ranges = <1800 1800 3300 3300>;
>  			sdhci,auto-cmd12;
> @@ -438,14 +438,14 @@ esdhc: esdhc@1560000 {
>  		ddr: memory-controller@1080000 {
>  			compatible = "fsl,qoriq-memory-controller";
>  			reg = <0x0 0x1080000 0x0 0x1000>;
> -			interrupts = <0 144 0x4>;
> +			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
>  			big-endian;
>  		};
> 
>  		tmu: tmu@1f00000 {
>  			compatible = "fsl,qoriq-tmu";
>  			reg = <0x0 0x1f00000 0x0 0x10000>;
> -			interrupts = <0 33 0x4>;
> +			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
>  			fsl,tmu-range = <0xb0000 0x9002a 0x6004c
> 0x70062>;
>  			fsl,tmu-calibration =
>  					<0x00000000 0x00000023>,
> @@ -518,7 +518,7 @@ dspi0: spi@2100000 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			reg = <0x0 0x2100000 0x0 0x10000>;
> -			interrupts = <0 64 0x4>;
> +			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-names = "dspi";
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
> @@ -532,7 +532,7 @@ i2c0: i2c@2180000 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			reg = <0x0 0x2180000 0x0 0x10000>;
> -			interrupts = <0 56 0x4>;
> +			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-names = "i2c";
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
> @@ -547,7 +547,7 @@ i2c1: i2c@2190000 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			reg = <0x0 0x2190000 0x0 0x10000>;
> -			interrupts = <0 57 0x4>;
> +			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-names = "i2c";
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
> @@ -560,7 +560,7 @@ i2c2: i2c@21a0000 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			reg = <0x0 0x21a0000 0x0 0x10000>;
> -			interrupts = <0 58 0x4>;
> +			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-names = "i2c";
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
> @@ -573,7 +573,7 @@ i2c3: i2c@21b0000 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			reg = <0x0 0x21b0000 0x0 0x10000>;
> -			interrupts = <0 59 0x4>;
> +			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-names = "i2c";
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
> @@ -584,7 +584,7 @@ i2c3: i2c@21b0000 {
>  		duart0: serial@21c0500 {
>  			compatible = "fsl,ns16550", "ns16550a";
>  			reg = <0x00 0x21c0500 0x0 0x100>;
> -			interrupts = <0 54 0x4>;
> +			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
>  		};
> @@ -592,7 +592,7 @@ duart0: serial@21c0500 {
>  		duart1: serial@21c0600 {
>  			compatible = "fsl,ns16550", "ns16550a";
>  			reg = <0x00 0x21c0600 0x0 0x100>;
> -			interrupts = <0 54 0x4>;
> +			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
>  		};
> @@ -600,7 +600,7 @@ duart1: serial@21c0600 {
>  		duart2: serial@21d0500 {
>  			compatible = "fsl,ns16550", "ns16550a";
>  			reg = <0x0 0x21d0500 0x0 0x100>;
> -			interrupts = <0 55 0x4>;
> +			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
>  		};
> @@ -608,7 +608,7 @@ duart2: serial@21d0500 {
>  		duart3: serial@21d0600 {
>  			compatible = "fsl,ns16550", "ns16550a";
>  			reg = <0x0 0x21d0600 0x0 0x100>;
> -			interrupts = <0 55 0x4>;
> +			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
>  		};
> @@ -616,7 +616,7 @@ duart3: serial@21d0600 {
>  		gpio1: gpio@2300000 {
>  			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
>  			reg = <0x0 0x2300000 0x0 0x10000>;
> -			interrupts = <0 66 0x4>;
> +			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  			interrupt-controller;
> @@ -626,7 +626,7 @@ gpio1: gpio@2300000 {
>  		gpio2: gpio@2310000 {
>  			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
>  			reg = <0x0 0x2310000 0x0 0x10000>;
> -			interrupts = <0 67 0x4>;
> +			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  			interrupt-controller;
> @@ -636,7 +636,7 @@ gpio2: gpio@2310000 {
>  		gpio3: gpio@2320000 {
>  			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
>  			reg = <0x0 0x2320000 0x0 0x10000>;
> -			interrupts = <0 68 0x4>;
> +			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  			interrupt-controller;
> @@ -646,7 +646,7 @@ gpio3: gpio@2320000 {
>  		gpio4: gpio@2330000 {
>  			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
>  			reg = <0x0 0x2330000 0x0 0x10000>;
> -			interrupts = <0 134 0x4>;
> +			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  			interrupt-controller;
> @@ -721,7 +721,7 @@ data-only@0 {
>  		lpuart0: serial@2950000 {
>  			compatible = "fsl,ls1021a-lpuart";
>  			reg = <0x0 0x2950000 0x0 0x1000>;
> -			interrupts = <0 48 0x4>;
> +			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_SYSCLK 0>;
>  			clock-names = "ipg";
>  			status = "disabled";
> @@ -730,7 +730,7 @@ lpuart0: serial@2950000 {
>  		lpuart1: serial@2960000 {
>  			compatible = "fsl,ls1021a-lpuart";
>  			reg = <0x0 0x2960000 0x0 0x1000>;
> -			interrupts = <0 49 0x4>;
> +			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
>  			clock-names = "ipg";
> @@ -740,7 +740,7 @@ lpuart1: serial@2960000 {
>  		lpuart2: serial@2970000 {
>  			compatible = "fsl,ls1021a-lpuart";
>  			reg = <0x0 0x2970000 0x0 0x1000>;
> -			interrupts = <0 50 0x4>;
> +			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
>  			clock-names = "ipg";
> @@ -750,7 +750,7 @@ lpuart2: serial@2970000 {
>  		lpuart3: serial@2980000 {
>  			compatible = "fsl,ls1021a-lpuart";
>  			reg = <0x0 0x2980000 0x0 0x1000>;
> -			interrupts = <0 51 0x4>;
> +			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
>  			clock-names = "ipg";
> @@ -760,7 +760,7 @@ lpuart3: serial@2980000 {
>  		lpuart4: serial@2990000 {
>  			compatible = "fsl,ls1021a-lpuart";
>  			reg = <0x0 0x2990000 0x0 0x1000>;
> -			interrupts = <0 52 0x4>;
> +			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
>  			clock-names = "ipg";
> @@ -770,7 +770,7 @@ lpuart4: serial@2990000 {
>  		lpuart5: serial@29a0000 {
>  			compatible = "fsl,ls1021a-lpuart";
>  			reg = <0x0 0x29a0000 0x0 0x1000>;
> -			interrupts = <0 53 0x4>;
> +			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
>  			clock-names = "ipg";
> @@ -780,7 +780,7 @@ lpuart5: serial@29a0000 {
>  		wdog0: watchdog@2ad0000 {
>  			compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
>  			reg = <0x0 0x2ad0000 0x0 0x10000>;
> -			interrupts = <0 83 0x4>;
> +			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(1)>;
>  			clock-names = "wdog";
> @@ -793,8 +793,8 @@ edma0: dma-controller@2c00000 {
>  			reg = <0x0 0x2c00000 0x0 0x10000>,
>  			      <0x0 0x2c10000 0x0 0x10000>,
>  			      <0x0 0x2c20000 0x0 0x10000>;
> -			interrupts = <0 103 0x4>,
> -				     <0 103 0x4>;
> +			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "edma-tx", "edma-err";
>  			dma-channels = <32>;
>  			big-endian;
> @@ -815,7 +815,7 @@ aux_bus: aux_bus {
>  			usb0: usb@2f00000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x0 0x2f00000 0x0 0x10000>;
> -				interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupts = <GIC_SPI 60
> IRQ_TYPE_LEVEL_HIGH>;
>  				dr_mode = "host";
>  				snps,quirk-frame-length-adjustment =
> <0x20>;
>  				snps,dis_rxdet_inp3_quirk;
> @@ -827,7 +827,7 @@ usb0: usb@2f00000 {
>  			usb1: usb@3000000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x0 0x3000000 0x0 0x10000>;
> -				interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupts = <GIC_SPI 61
> IRQ_TYPE_LEVEL_HIGH>;
>  				dr_mode = "host";
>  				snps,quirk-frame-length-adjustment =
> <0x20>;
>  				snps,dis_rxdet_inp3_quirk;
> @@ -839,7 +839,7 @@ usb1: usb@3000000 {
>  			usb2: usb@3100000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x0 0x3100000 0x0 0x10000>;
> -				interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupts = <GIC_SPI 63
> IRQ_TYPE_LEVEL_HIGH>;
>  				dr_mode = "host";
>  				snps,quirk-frame-length-adjustment =
> <0x20>;
>  				snps,dis_rxdet_inp3_quirk;
> @@ -853,7 +853,7 @@ sata: sata@3200000 {
>  				reg = <0x0 0x3200000 0x0 0x10000>,
>  					<0x0 0x20140520 0x0 0x4>;
>  				reg-names = "ahci", "sata-ecc";
> -				interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupts = <GIC_SPI 69
> IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&clockgen
> QORIQ_CLK_PLATFORM_PLL
>  						    QORIQ_CLK_PLL_DIV(1)>;
>  				dma-coherent;
> @@ -864,21 +864,21 @@ msi1: msi-controller1@1571000 {
>  			compatible = "fsl,ls1043a-msi";
>  			reg = <0x0 0x1571000 0x0 0x8>;
>  			msi-controller;
> -			interrupts = <0 116 0x4>;
> +			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
>  		};
> 
>  		msi2: msi-controller2@1572000 {
>  			compatible = "fsl,ls1043a-msi";
>  			reg = <0x0 0x1572000 0x0 0x8>;
>  			msi-controller;
> -			interrupts = <0 126 0x4>;
> +			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
>  		};
> 
>  		msi3: msi-controller3@1573000 {
>  			compatible = "fsl,ls1043a-msi";
>  			reg = <0x0 0x1573000 0x0 0x8>;
>  			msi-controller;
> -			interrupts = <0 160 0x4>;
> +			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
>  		};
> 
>  		pcie1: pcie@3400000 {
> @@ -886,8 +886,8 @@ pcie1: pcie@3400000 {
>  			reg = <0x00 0x03400000 0x0 0x00100000>, /*
> controller registers */
>  			      <0x40 0x00000000 0x0 0x00002000>; /*
> configuration space */
>  			reg-names = "regs", "config";
> -			interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>,
> -				     <0 118 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "pme", "aer";
>  			#address-cells = <3>;
>  			#size-cells = <2>;
> @@ -913,8 +913,8 @@ pcie2: pcie@3500000 {
>  			reg = <0x00 0x03500000 0x0 0x00100000>, /*
> controller registers */
>  			      <0x48 0x00000000 0x0 0x00002000>; /*
> configuration space */
>  			reg-names = "regs", "config";
> -			interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>,
> -				     <0 128 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "pme", "aer";
>  			#address-cells = <3>;
>  			#size-cells = <2>;
> @@ -940,8 +940,8 @@ pcie3: pcie@3600000 {
>  			reg = <0x00 0x03600000 0x0 0x00100000>, /*
> controller registers */
>  			      <0x50 0x00000000 0x0 0x00002000>; /*
> configuration space */
>  			reg-names = "regs", "config";
> -			interrupts = <0 161 IRQ_TYPE_LEVEL_HIGH>,
> -				     <0 162 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "pme", "aer";
>  			#address-cells = <3>;
>  			#size-cells = <2>;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> index 754a64be739c..e5fcfc690ffc 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> @@ -441,7 +441,7 @@ clockgen: clocking@1ee1000 {
>  		tmu: tmu@1f00000 {
>  			compatible = "fsl,qoriq-tmu";
>  			reg = <0x0 0x1f00000 0x0 0x10000>;
> -			interrupts = <0 33 0x4>;
> +			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
>  			fsl,tmu-range = <0xb0000 0x9002a 0x6004c
> 0x70062>;
>  			fsl,tmu-calibration =
>  				/* Calibration data group 1 */
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> index 604bf88d70b3..91589b907ec8 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> @@ -118,7 +118,7 @@ gic: interrupt-controller@6000000 {
>  		      <0x0 0x0c0c0000 0 0x2000>, /* GICC */
>  		      <0x0 0x0c0d0000 0 0x1000>, /* GICH */
>  		      <0x0 0x0c0e0000 0 0x20000>; /* GICV */
> -		interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>  		#address-cells = <2>;
>  		#size-cells = <2>;
>  		ranges;
> @@ -183,10 +183,10 @@ soc-crit {
> 
>  	timer {
>  		compatible = "arm,armv8-timer";
> -		interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure
> PPI */
> -			     <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-
> Secure PPI */
> -			     <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
> -			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI
> */
> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,/* Physical
> Secure PPI */
> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,/* Physical
> Non-Secure PPI */
> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual
> PPI */
> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;/*
> Hypervisor PPI */
>  	};
> 
>  	pmu {
> @@ -280,7 +280,7 @@ sfp: efuse@1e80000 {
>  		tmu: tmu@1f80000 {
>  			compatible = "fsl,qoriq-tmu";
>  			reg = <0x0 0x1f80000 0x0 0x10000>;
> -			interrupts = <0 23 0x4>;
> +			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
>  			fsl,tmu-range = <0xb0000 0x9002a 0x6004c
> 0x70062>;
>  			fsl,tmu-calibration =
>  				/* Calibration data group 1 */
> @@ -347,7 +347,7 @@ duart0: serial@21c0500 {
>  			reg = <0x0 0x21c0500 0x0 0x100>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(4)>;
> -			interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
>  			status = "disabled";
>  		};
> 
> @@ -356,14 +356,14 @@ duart1: serial@21c0600 {
>  			reg = <0x0 0x21c0600 0x0 0x100>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(4)>;
> -			interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
>  			status = "disabled";
>  		};
> 
>  		gpio0: gpio@2300000 {
>  			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
>  			reg = <0x0 0x2300000 0x0 0x10000>;
> -			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
>  			little-endian;
>  			gpio-controller;
>  			#gpio-cells = <2>;
> @@ -374,7 +374,7 @@ gpio0: gpio@2300000 {
>  		gpio1: gpio@2310000 {
>  			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
>  			reg = <0x0 0x2310000 0x0 0x10000>;
> -			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
>  			little-endian;
>  			gpio-controller;
>  			#gpio-cells = <2>;
> @@ -385,7 +385,7 @@ gpio1: gpio@2310000 {
>  		gpio2: gpio@2320000 {
>  			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
>  			reg = <0x0 0x2320000 0x0 0x10000>;
> -			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
>  			little-endian;
>  			gpio-controller;
>  			#gpio-cells = <2>;
> @@ -396,7 +396,7 @@ gpio2: gpio@2320000 {
>  		gpio3: gpio@2330000 {
>  			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
>  			reg = <0x0 0x2330000 0x0 0x10000>;
> -			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
>  			little-endian;
>  			gpio-controller;
>  			#gpio-cells = <2>;
> @@ -407,7 +407,7 @@ gpio3: gpio@2330000 {
>  		ifc: memory-controller@2240000 {
>  			compatible = "fsl,ifc";
>  			reg = <0x0 0x2240000 0x0 0x20000>;
> -			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
>  			little-endian;
>  			#address-cells = <2>;
>  			#size-cells = <1>;
> @@ -419,7 +419,7 @@ i2c0: i2c@2000000 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			reg = <0x0 0x2000000 0x0 0x10000>;
> -			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(8)>;
>  			status = "disabled";
> @@ -430,7 +430,7 @@ i2c1: i2c@2010000 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			reg = <0x0 0x2010000 0x0 0x10000>;
> -			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(8)>;
>  			status = "disabled";
> @@ -441,7 +441,7 @@ i2c2: i2c@2020000 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			reg = <0x0 0x2020000 0x0 0x10000>;
> -			interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(8)>;
>  			status = "disabled";
> @@ -452,7 +452,7 @@ i2c3: i2c@2030000 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			reg = <0x0 0x2030000 0x0 0x10000>;
> -			interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(8)>;
>  			status = "disabled";
> @@ -477,7 +477,7 @@ QORIQ_CLK_PLL_DIV(4)>,
>  		esdhc: esdhc@2140000 {
>  			compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
>  			reg = <0x0 0x2140000 0x0 0x10000>;
> -			interrupts = <0 28 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-frequency = <0>;
>  			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
>  			voltage-ranges = <1800 1800 3300 3300>; @@ -
> 490,7 +490,7 @@ esdhc: esdhc@2140000 {
>  		usb0: usb@3100000 {
>  			compatible = "snps,dwc3";
>  			reg = <0x0 0x3100000 0x0 0x10000>;
> -			interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
>  			dr_mode = "host";
>  			snps,quirk-frame-length-adjustment = <0x20>;
>  			snps,dis_rxdet_inp3_quirk;
> @@ -501,7 +501,7 @@ usb0: usb@3100000 {
>  		usb1: usb@3110000 {
>  			compatible = "snps,dwc3";
>  			reg = <0x0 0x3110000 0x0 0x10000>;
> -			interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
>  			dr_mode = "host";
>  			snps,quirk-frame-length-adjustment = <0x20>;
>  			snps,dis_rxdet_inp3_quirk;
> @@ -514,7 +514,7 @@ sata: sata@3200000 {
>  			reg = <0x0 0x3200000 0x0 0x10000>,
>  				<0x7 0x100520 0x0 0x4>;
>  			reg-names = "ahci", "sata-ecc";
> -			interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(4)>;
>  			dma-coherent;
> @@ -565,7 +565,7 @@ pcie1: pcie@3400000 {
>  			reg = <0x00 0x03400000 0x0 0x00100000>, /*
> controller registers */
>  			      <0x20 0x00000000 0x0 0x00002000>; /*
> configuration space */
>  			reg-names = "regs", "config";
> -			interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer
> interrupt */
> +			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> /* aer interrupt */
>  			interrupt-names = "aer";
>  			#address-cells = <3>;
>  			#size-cells = <2>;
> @@ -604,7 +604,7 @@ pcie2: pcie@3500000 {
>  			reg = <0x00 0x03500000 0x0 0x00100000>, /*
> controller registers */
>  			      <0x28 0x00000000 0x0 0x00002000>; /*
> configuration space */
>  			reg-names = "regs", "config";
> -			interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer
> interrupt */
> +			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
> /* aer interrupt */
>  			interrupt-names = "aer";
>  			#address-cells = <3>;
>  			#size-cells = <2>;
> @@ -642,7 +642,7 @@ pcie3: pcie@3600000 {
>  			reg = <0x00 0x03600000 0x0 0x00100000>, /*
> controller registers */
>  			      <0x30 0x00000000 0x0 0x00002000>; /*
> configuration space */
>  			reg-names = "regs", "config";
> -			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer
> interrupt */
> +			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
> /* aer interrupt */
>  			interrupt-names = "aer";
>  			#address-cells = <3>;
>  			#size-cells = <2>;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> index 8352197cea6f..e9bc1f4fa13c 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> @@ -15,7 +15,7 @@
>  / {
>  	pmu {
>  		compatible = "arm,cortex-a57-pmu";
> -		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
>  	};
>  };
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
> index 245bbd615c81..60c422560e33 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
> @@ -15,7 +15,7 @@
>  / {
>  	pmu {
>  		compatible = "arm,cortex-a72-pmu";
> -		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
>  	};
>  };
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> index ccba0a135b24..cc305e629bdc 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> @@ -58,7 +58,7 @@ gic: interrupt-controller@6000000 {
>  		#size-cells = <2>;
>  		ranges;
>  		interrupt-controller;
> -		interrupts = <1 9 0x4>;
> +		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> 
>  		its: msi-controller@6020000 {
>  			compatible = "arm,gic-v3-its";
> @@ -314,7 +314,7 @@ extirq: interrupt-controller@14 {
>  		tmu: tmu@1f80000 {
>  			compatible = "fsl,qoriq-tmu";
>  			reg = <0x0 0x1f80000 0x0 0x10000>;
> -			interrupts = <0 23 0x4>;
> +			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
>  			fsl,tmu-range = <0xb0000 0x9002a 0x6004c
> 0x30062>;
>  			fsl,tmu-calibration =
>  					<0x00000000 0x00000026>,
> @@ -362,7 +362,7 @@ serial0: serial@21c0500 {
>  			reg = <0x0 0x21c0500 0x0 0x100>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(4)>;
> -			interrupts = <0 32 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
>  		};
> 
>  		serial1: serial@21c0600 {
> @@ -370,7 +370,7 @@ serial1: serial@21c0600 {
>  			reg = <0x0 0x21c0600 0x0 0x100>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(4)>;
> -			interrupts = <0 32 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
>  		};
> 
>  		serial2: serial@21d0500 {
> @@ -378,7 +378,7 @@ serial2: serial@21d0500 {
>  			reg = <0x0 0x21d0500 0x0 0x100>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(4)>;
> -			interrupts = <0 33 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
>  		};
> 
>  		serial3: serial@21d0600 {
> @@ -386,7 +386,7 @@ serial3: serial@21d0600 {
>  			reg = <0x0 0x21d0600 0x0 0x100>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(4)>;
> -			interrupts = <0 33 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
>  		};
> 
>  		cluster1_core0_watchdog: wdt@c000000 { @@ -883,48
> +883,48 @@ smmu: iommu@5000000 {
>  			#iommu-cells = <1>;
>  			stream-match-mask = <0x7C00>;
>  			dma-coherent;
> -			interrupts = <0 13 4>, /* global secure fault */
> -				     <0 14 4>, /* combined secure interrupt
> */
> -				     <0 15 4>, /* global non-secure fault */
> -				     <0 16 4>, /* combined non-secure
> interrupt */
> +			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /*
> global secure fault */
> +				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /*
> combined secure interrupt */
> +				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, /*
> global non-secure fault */
> +				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, /*
> combined non-secure
> +interrupt */
>  				/* performance counter interrupts 0-7 */
> -				     <0 211 4>, <0 212 4>,
> -				     <0 213 4>, <0 214 4>,
> -				     <0 215 4>, <0 216 4>,
> -				     <0 217 4>, <0 218 4>,
> +				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 218
> +IRQ_TYPE_LEVEL_HIGH>,
>  				/* per context interrupt, 64 interrupts */
> -				     <0 146 4>, <0 147 4>,
> -				     <0 148 4>, <0 149 4>,
> -				     <0 150 4>, <0 151 4>,
> -				     <0 152 4>, <0 153 4>,
> -				     <0 154 4>, <0 155 4>,
> -				     <0 156 4>, <0 157 4>,
> -				     <0 158 4>, <0 159 4>,
> -				     <0 160 4>, <0 161 4>,
> -				     <0 162 4>, <0 163 4>,
> -				     <0 164 4>, <0 165 4>,
> -				     <0 166 4>, <0 167 4>,
> -				     <0 168 4>, <0 169 4>,
> -				     <0 170 4>, <0 171 4>,
> -				     <0 172 4>, <0 173 4>,
> -				     <0 174 4>, <0 175 4>,
> -				     <0 176 4>, <0 177 4>,
> -				     <0 178 4>, <0 179 4>,
> -				     <0 180 4>, <0 181 4>,
> -				     <0 182 4>, <0 183 4>,
> -				     <0 184 4>, <0 185 4>,
> -				     <0 186 4>, <0 187 4>,
> -				     <0 188 4>, <0 189 4>,
> -				     <0 190 4>, <0 191 4>,
> -				     <0 192 4>, <0 193 4>,
> -				     <0 194 4>, <0 195 4>,
> -				     <0 196 4>, <0 197 4>,
> -				     <0 198 4>, <0 199 4>,
> -				     <0 200 4>, <0 201 4>,
> -				     <0 202 4>, <0 203 4>,
> -				     <0 204 4>, <0 205 4>,
> -				     <0 206 4>, <0 207 4>,
> -				     <0 208 4>, <0 209 4>;
> +				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 209
> +IRQ_TYPE_LEVEL_HIGH>;
>  		};
> 
>  		dspi: spi@2100000 {
> @@ -933,7 +933,7 @@ dspi: spi@2100000 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			reg = <0x0 0x2100000 0x0 0x10000>;
> -			interrupts = <0 26 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(4)>;
>  			clock-names = "dspi";
> @@ -944,7 +944,7 @@ esdhc: esdhc@2140000 {
>  			status = "disabled";
>  			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
>  			reg = <0x0 0x2140000 0x0 0x10000>;
> -			interrupts = <0 28 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(2)>;
>  			voltage-ranges = <1800 1800 3300 3300>; @@ -
> 956,7 +956,7 @@ esdhc: esdhc@2140000 {
>  		gpio0: gpio@2300000 {
>  			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
>  			reg = <0x0 0x2300000 0x0 0x10000>;
> -			interrupts = <0 36 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
>  			gpio-controller;
>  			little-endian;
>  			#gpio-cells = <2>;
> @@ -967,7 +967,7 @@ gpio0: gpio@2300000 {
>  		gpio1: gpio@2310000 {
>  			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
>  			reg = <0x0 0x2310000 0x0 0x10000>;
> -			interrupts = <0 36 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
>  			gpio-controller;
>  			little-endian;
>  			#gpio-cells = <2>;
> @@ -978,7 +978,7 @@ gpio1: gpio@2310000 {
>  		gpio2: gpio@2320000 {
>  			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
>  			reg = <0x0 0x2320000 0x0 0x10000>;
> -			interrupts = <0 37 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
>  			gpio-controller;
>  			little-endian;
>  			#gpio-cells = <2>;
> @@ -989,7 +989,7 @@ gpio2: gpio@2320000 {
>  		gpio3: gpio@2330000 {
>  			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
>  			reg = <0x0 0x2330000 0x0 0x10000>;
> -			interrupts = <0 37 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
>  			gpio-controller;
>  			little-endian;
>  			#gpio-cells = <2>;
> @@ -1003,7 +1003,7 @@ i2c0: i2c@2000000 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			reg = <0x0 0x2000000 0x0 0x10000>;
> -			interrupts = <0 34 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-names = "i2c";
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(4)>;
> @@ -1015,7 +1015,7 @@ i2c1: i2c@2010000 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			reg = <0x0 0x2010000 0x0 0x10000>;
> -			interrupts = <0 34 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-names = "i2c";
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(4)>;
> @@ -1027,7 +1027,7 @@ i2c2: i2c@2020000 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			reg = <0x0 0x2020000 0x0 0x10000>;
> -			interrupts = <0 35 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-names = "i2c";
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(4)>;
> @@ -1039,7 +1039,7 @@ i2c3: i2c@2030000 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			reg = <0x0 0x2030000 0x0 0x10000>;
> -			interrupts = <0 35 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
>  			clock-names = "i2c";
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(4)>;
> @@ -1048,7 +1048,7 @@ i2c3: i2c@2030000 {
>  		ifc: memory-controller@2240000 {
>  			compatible = "fsl,ifc";
>  			reg = <0x0 0x2240000 0x0 0x20000>;
> -			interrupts = <0 21 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
>  			little-endian;
>  			#address-cells = <2>;
>  			#size-cells = <1>;
> @@ -1077,7 +1077,7 @@ QORIQ_CLK_PLL_DIV(4)>,
>  		pcie1: pcie@3400000 {
>  			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
>  			reg-names = "regs", "config";
> -			interrupts = <0 108 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "intr";
>  			#address-cells = <3>;
>  			#size-cells = <2>;
> @@ -1099,7 +1099,7 @@ pcie1: pcie@3400000 {
>  		pcie2: pcie@3500000 {
>  			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
>  			reg-names = "regs", "config";
> -			interrupts = <0 113 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "intr";
>  			#address-cells = <3>;
>  			#size-cells = <2>;
> @@ -1121,7 +1121,7 @@ pcie2: pcie@3500000 {
>  		pcie3: pcie@3600000 {
>  			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
>  			reg-names = "regs", "config";
> -			interrupts = <0 118 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "intr";
>  			#address-cells = <3>;
>  			#size-cells = <2>;
> @@ -1143,7 +1143,7 @@ pcie3: pcie@3600000 {
>  		pcie4: pcie@3700000 {
>  			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
>  			reg-names = "regs", "config";
> -			interrupts = <0 123 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "intr";
>  			#address-cells = <3>;
>  			#size-cells = <2>;
> @@ -1166,7 +1166,7 @@ sata0: sata@3200000 {
>  			status = "disabled";
>  			compatible = "fsl,ls2080a-ahci";
>  			reg = <0x0 0x3200000 0x0 0x10000>;
> -			interrupts = <0 133 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(4)>;
>  			dma-coherent;
> @@ -1176,7 +1176,7 @@ sata1: sata@3210000 {
>  			status = "disabled";
>  			compatible = "fsl,ls2080a-ahci";
>  			reg = <0x0 0x3210000 0x0 0x10000>;
> -			interrupts = <0 136 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(4)>;
>  			dma-coherent;
> @@ -1192,7 +1192,7 @@ bus: bus {
>  			usb0: usb@3100000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x0 0x3100000 0x0 0x10000>;
> -				interrupts = <0 80 0x4>; /* Level high type
> */
> +				interrupts = <GIC_SPI 80
> IRQ_TYPE_LEVEL_HIGH>;
>  				dr_mode = "host";
>  				snps,quirk-frame-length-adjustment =
> <0x20>;
>  				snps,dis_rxdet_inp3_quirk;
> @@ -1203,7 +1203,7 @@ usb0: usb@3100000 {
>  			usb1: usb@3110000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x0 0x3110000 0x0 0x10000>;
> -				interrupts = <0 81 0x4>; /* Level high type
> */
> +				interrupts = <GIC_SPI 81
> IRQ_TYPE_LEVEL_HIGH>;
>  				dr_mode = "host";
>  				snps,quirk-frame-length-adjustment =
> <0x20>;
>  				snps,dis_rxdet_inp3_quirk;
> @@ -1215,7 +1215,7 @@ usb1: usb@3110000 {
>  		ccn@4000000 {
>  			compatible = "arm,ccn-504";
>  			reg = <0x0 0x04000000 0x0 0x01000000>;
> -			interrupts = <0 12 4>;
> +			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>  		};
> 
>  		rcpm: power-controller@1e34040 {
> @@ -1236,14 +1236,14 @@ ftm_alarm0: timer@2800000 {
>  	ddr1: memory-controller@1080000 {
>  		compatible = "fsl,qoriq-memory-controller";
>  		reg = <0x0 0x1080000 0x0 0x1000>;
> -		interrupts = <0 17 0x4>;
> +		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
>  		little-endian;
>  	};
> 
>  	ddr2: memory-controller@1090000 {
>  		compatible = "fsl,qoriq-memory-controller";
>  		reg = <0x0 0x1090000 0x0 0x1000>;
> -		interrupts = <0 18 0x4>;
> +		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
>  		little-endian;
>  	};
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> index 96055593204a..eaa7d8c70964 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -928,7 +928,7 @@ dspi2: spi@2120000 {
>  		esdhc0: esdhc@2140000 {
>  			compatible = "fsl,esdhc";
>  			reg = <0x0 0x2140000 0x0 0x10000>;
> -			interrupts = <0 28 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(2)>;
>  			dma-coherent;
> @@ -942,7 +942,7 @@ esdhc0: esdhc@2140000 {
>  		esdhc1: esdhc@2150000 {
>  			compatible = "fsl,esdhc";
>  			reg = <0x0 0x2150000 0x0 0x10000>;
> -			interrupts = <0 63 0x4>; /* Level high type */
> +			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(2)>;
>  			dma-coherent;
> --
> 2.43.0
>
Krzysztof Kozlowski June 6, 2024, 6:14 a.m. UTC | #2 
On 06/06/2024 03:36, Peng Fan wrote:
>> Subject: [PATCH 1/3] arm64: dts: freescale: use defines for interrupts
>>
>> Replace hard-coded interrupt parts (GIC, flags) with standard defines for
>> readability.  No changes in resulting DTBs.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> Reviewed-by: Peng Fan <peng.fan@nxp.com>

Please trim your answers, so we do not have to scroll needlessly through
entire email to see if you left some feedback or not.

Best regards,
Krzysztof
Shawn Guo June 17, 2024, 1:20 a.m. UTC | #3 
On Wed, Jun 05, 2024 at 05:30:18PM +0200, Krzysztof Kozlowski wrote:
> Replace hard-coded interrupt parts (GIC, flags) with standard defines
> for readability.  No changes in resulting DTBs.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Applied all, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index a0f7bbd691a0..cfb77a76a240 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -74,15 +74,15 @@  coreclk: coreclk {
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
-			     <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
-			     <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
-			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
 	};
 
 	pmu {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	gic: interrupt-controller@1400000 {
@@ -93,7 +93,7 @@  gic: interrupt-controller@1400000 {
 		      <0x0 0x1402000 0 0x2000>, /* GICC */
 		      <0x0 0x1404000 0 0x2000>, /* GICH */
 		      <0x0 0x1406000 0 0x2000>; /* GICV */
-		interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	reboot {
@@ -159,7 +159,7 @@  QORIQ_CLK_PLL_DIV(1)>,
 		esdhc0: esdhc@1560000 {
 			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
-			interrupts = <0 62 0x4>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			voltage-ranges = <1800 1800 3300 3300>;
@@ -178,7 +178,7 @@  scfg: scfg@1570000 {
 		esdhc1: esdhc@1580000 {
 			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1580000 0x0 0x10000>;
-			interrupts = <0 65 0x4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			voltage-ranges = <1800 1800 3300 3300>;
@@ -305,7 +305,7 @@  clockgen: clocking@1ee1000 {
 		tmu: tmu@1f00000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f00000 0x0 0x10000>;
-			interrupts = <0 33 0x4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
 			fsl,tmu-calibration =
 					<0x00000000 0x00000025>,
@@ -355,7 +355,7 @@  i2c0: i2c@2180000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
-			interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			scl-gpios = <&gpio0 2 0>;
@@ -367,7 +367,7 @@  i2c1: i2c@2190000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
-			interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			scl-gpios = <&gpio0 13 0>;
@@ -379,7 +379,7 @@  dspi: spi@2100000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2100000 0x0 0x10000>;
-			interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "dspi";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
@@ -391,7 +391,7 @@  dspi: spi@2100000 {
 		duart0: serial@21c0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0500 0x0 0x100>;
-			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
@@ -400,7 +400,7 @@  duart0: serial@21c0500 {
 		duart1: serial@21c0600 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0600 0x0 0x100>;
-			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
@@ -409,7 +409,7 @@  duart1: serial@21c0600 {
 		gpio0: gpio@2300000 {
 			compatible = "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
-			interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -419,7 +419,7 @@  gpio0: gpio@2300000 {
 		gpio1: gpio@2310000 {
 			compatible = "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
-			interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -430,7 +430,7 @@  wdog0: watchdog@2ad0000 {
 			compatible = "fsl,ls1012a-wdt",
 				     "fsl,imx21-wdt";
 			reg = <0x0 0x2ad0000 0x0 0x10000>;
-			interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>;
 			big-endian;
 		};
@@ -439,7 +439,7 @@  sai1: sai@2b50000 {
 			#sound-dai-cells = <0>;
 			compatible = "fsl,vf610-sai";
 			reg = <0x0 0x2b50000 0x0 0x10000>;
-			interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>,
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -459,7 +459,7 @@  sai2: sai@2b60000 {
 			#sound-dai-cells = <0>;
 			compatible = "fsl,vf610-sai";
 			reg = <0x0 0x2b60000 0x0 0x10000>;
-			interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>,
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -481,8 +481,8 @@  edma0: dma-controller@2c00000 {
 			reg = <0x0 0x2c00000 0x0 0x10000>,
 			      <0x0 0x2c10000 0x0 0x10000>,
 			      <0x0 0x2c20000 0x0 0x10000>;
-			interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 103 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "edma-tx", "edma-err";
 			dma-channels = <32>;
 			big-endian;
@@ -496,7 +496,7 @@  QORIQ_CLK_PLL_DIV(4)>,
 		usb0: usb@2f00000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x2f00000 0x0 0x10000>;
-			interrupts = <0 60 0x4>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
@@ -509,7 +509,7 @@  sata: sata@3200000 {
 			reg = <0x0 0x3200000 0x0 0x10000>,
 				<0x0 0x20140520 0x0 0x4>;
 			reg-names = "ahci", "sata-ecc";
-			interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			dma-coherent;
@@ -519,7 +519,7 @@  sata: sata@3200000 {
 		usb1: usb@8600000 {
 			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
 			reg = <0x0 0x8600000 0x0 0x1000>;
-			interrupts = <0 139 0x4>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			phy_type = "ulpi";
 		};
@@ -528,7 +528,7 @@  msi: msi-controller1@1572000 {
 			compatible = "fsl,ls1012a-msi";
 			reg = <0x0 0x1572000 0x0 0x8>;
 			msi-controller;
-			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pcie1: pcie@3400000 {
@@ -536,8 +536,8 @@  pcie1: pcie@3400000 {
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 118 0x4>, /* controller interrupt */
-				     <0 117 0x4>; /* PME interrupt */
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
 			interrupt-names = "aer", "pme";
 			#address-cells = <3>;
 			#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 70b8731029c4..18aa02a0ebff 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -859,8 +859,8 @@  QORIQ_CLK_PLL_DIV(16)>,
 		malidp0: display@f080000 {
 			compatible = "arm,mali-dp500";
 			reg = <0x0 0xf080000 0x0 0x10000>;
-			interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "DE", "SE";
 			clocks = <&dpclk>,
 				 <&clockgen QORIQ_CLK_HWACCEL 2>,
@@ -1024,7 +1024,7 @@  dpclk: clock-controller@f1f0000 {
 		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
-			interrupts = <0 23 0x4>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
 			fsl,tmu-calibration =
 					<0x00000000 0x00000024>,
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 8ee6d8c0ef61..1f5ae061e7e3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -268,19 +268,19 @@  sec-crit {
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0xf08>, /* Physical Secure PPI */
-			     <1 14 0xf08>, /* Physical Non-Secure PPI */
-			     <1 11 0xf08>, /* Virtual PPI */
-			     <1 10 0xf08>; /* Hypervisor PPI */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		fsl,erratum-a008585;
 	};
 
 	pmu {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts = <0 106 0x4>,
-			     <0 107 0x4>,
-			     <0 95 0x4>,
-			     <0 97 0x4>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>,
 				     <&cpu1>,
 				     <&cpu2>,
@@ -295,7 +295,7 @@  gic: interrupt-controller@1400000 {
 		      <0x0 0x1402000 0 0x2000>, /* GICC */
 		      <0x0 0x1404000 0 0x2000>, /* GICH */
 		      <0x0 0x1406000 0 0x2000>; /* GICV */
-		interrupts = <1 9 0xf08>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	soc: soc {
@@ -352,7 +352,7 @@  crypto: crypto@1700000 {
 			#size-cells = <1>;
 			ranges = <0x0 0x00 0x1700000 0x100000>;
 			reg = <0x00 0x1700000 0x0 0x100000>;
-			interrupts = <0 75 0x4>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			dma-coherent;
 
 			sec_jr0: jr@10000 {
@@ -360,7 +360,7 @@  sec_jr0: jr@10000 {
 					     "fsl,sec-v5.0-job-ring",
 					     "fsl,sec-v4.0-job-ring";
 				reg = <0x10000 0x10000>;
-				interrupts = <0 71 0x4>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			sec_jr1: jr@20000 {
@@ -368,7 +368,7 @@  sec_jr1: jr@20000 {
 					     "fsl,sec-v5.0-job-ring",
 					     "fsl,sec-v4.0-job-ring";
 				reg = <0x20000 0x10000>;
-				interrupts = <0 72 0x4>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			sec_jr2: jr@30000 {
@@ -376,7 +376,7 @@  sec_jr2: jr@30000 {
 					     "fsl,sec-v5.0-job-ring",
 					     "fsl,sec-v4.0-job-ring";
 				reg = <0x30000 0x10000>;
-				interrupts = <0 73 0x4>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			sec_jr3: jr@40000 {
@@ -384,7 +384,7 @@  sec_jr3: jr@40000 {
 					     "fsl,sec-v5.0-job-ring",
 					     "fsl,sec-v4.0-job-ring";
 				reg = <0x40000 0x10000>;
-				interrupts = <0 74 0x4>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
@@ -405,7 +405,7 @@  dcfg: dcfg@1ee0000 {
 		ifc: memory-controller@1530000 {
 			compatible = "fsl,ifc";
 			reg = <0x0 0x1530000 0x0 0x10000>;
-			interrupts = <0 43 0x4>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		qspi: spi@1550000 {
@@ -415,7 +415,7 @@  qspi: spi@1550000 {
 			reg = <0x0 0x1550000 0x0 0x10000>,
 				<0x0 0x40000000 0x0 0x4000000>;
 			reg-names = "QuadSPI", "QuadSPI-memory";
-			interrupts = <0 99 0x4>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "qspi_en", "qspi";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>,
@@ -427,7 +427,7 @@  QORIQ_CLK_PLL_DIV(1)>,
 		esdhc: esdhc@1560000 {
 			compatible = "fsl,ls1043a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
-			interrupts = <0 62 0x4>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
@@ -438,14 +438,14 @@  esdhc: esdhc@1560000 {
 		ddr: memory-controller@1080000 {
 			compatible = "fsl,qoriq-memory-controller";
 			reg = <0x0 0x1080000 0x0 0x1000>;
-			interrupts = <0 144 0x4>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 			big-endian;
 		};
 
 		tmu: tmu@1f00000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f00000 0x0 0x10000>;
-			interrupts = <0 33 0x4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 			fsl,tmu-calibration =
 					<0x00000000 0x00000023>,
@@ -518,7 +518,7 @@  dspi0: spi@2100000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2100000 0x0 0x10000>;
-			interrupts = <0 64 0x4>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "dspi";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
@@ -532,7 +532,7 @@  i2c0: i2c@2180000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
-			interrupts = <0 56 0x4>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
@@ -547,7 +547,7 @@  i2c1: i2c@2190000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
-			interrupts = <0 57 0x4>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
@@ -560,7 +560,7 @@  i2c2: i2c@21a0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x21a0000 0x0 0x10000>;
-			interrupts = <0 58 0x4>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
@@ -573,7 +573,7 @@  i2c3: i2c@21b0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x21b0000 0x0 0x10000>;
-			interrupts = <0 59 0x4>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
@@ -584,7 +584,7 @@  i2c3: i2c@21b0000 {
 		duart0: serial@21c0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0500 0x0 0x100>;
-			interrupts = <0 54 0x4>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
@@ -592,7 +592,7 @@  duart0: serial@21c0500 {
 		duart1: serial@21c0600 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0600 0x0 0x100>;
-			interrupts = <0 54 0x4>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
@@ -600,7 +600,7 @@  duart1: serial@21c0600 {
 		duart2: serial@21d0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x0 0x21d0500 0x0 0x100>;
-			interrupts = <0 55 0x4>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
@@ -608,7 +608,7 @@  duart2: serial@21d0500 {
 		duart3: serial@21d0600 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x0 0x21d0600 0x0 0x100>;
-			interrupts = <0 55 0x4>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
@@ -616,7 +616,7 @@  duart3: serial@21d0600 {
 		gpio1: gpio@2300000 {
 			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
-			interrupts = <0 66 0x4>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -626,7 +626,7 @@  gpio1: gpio@2300000 {
 		gpio2: gpio@2310000 {
 			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
-			interrupts = <0 67 0x4>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -636,7 +636,7 @@  gpio2: gpio@2310000 {
 		gpio3: gpio@2320000 {
 			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
-			interrupts = <0 68 0x4>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -646,7 +646,7 @@  gpio3: gpio@2320000 {
 		gpio4: gpio@2330000 {
 			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
-			interrupts = <0 134 0x4>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -721,7 +721,7 @@  data-only@0 {
 		lpuart0: serial@2950000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2950000 0x0 0x1000>;
-			interrupts = <0 48 0x4>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_SYSCLK 0>;
 			clock-names = "ipg";
 			status = "disabled";
@@ -730,7 +730,7 @@  lpuart0: serial@2950000 {
 		lpuart1: serial@2960000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2960000 0x0 0x1000>;
-			interrupts = <0 49 0x4>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
@@ -740,7 +740,7 @@  lpuart1: serial@2960000 {
 		lpuart2: serial@2970000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2970000 0x0 0x1000>;
-			interrupts = <0 50 0x4>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
@@ -750,7 +750,7 @@  lpuart2: serial@2970000 {
 		lpuart3: serial@2980000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2980000 0x0 0x1000>;
-			interrupts = <0 51 0x4>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
@@ -760,7 +760,7 @@  lpuart3: serial@2980000 {
 		lpuart4: serial@2990000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2990000 0x0 0x1000>;
-			interrupts = <0 52 0x4>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
@@ -770,7 +770,7 @@  lpuart4: serial@2990000 {
 		lpuart5: serial@29a0000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x29a0000 0x0 0x1000>;
-			interrupts = <0 53 0x4>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
@@ -780,7 +780,7 @@  lpuart5: serial@29a0000 {
 		wdog0: watchdog@2ad0000 {
 			compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
 			reg = <0x0 0x2ad0000 0x0 0x10000>;
-			interrupts = <0 83 0x4>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "wdog";
@@ -793,8 +793,8 @@  edma0: dma-controller@2c00000 {
 			reg = <0x0 0x2c00000 0x0 0x10000>,
 			      <0x0 0x2c10000 0x0 0x10000>,
 			      <0x0 0x2c20000 0x0 0x10000>;
-			interrupts = <0 103 0x4>,
-				     <0 103 0x4>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "edma-tx", "edma-err";
 			dma-channels = <32>;
 			big-endian;
@@ -815,7 +815,7 @@  aux_bus: aux_bus {
 			usb0: usb@2f00000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x2f00000 0x0 0x10000>;
-				interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
@@ -827,7 +827,7 @@  usb0: usb@2f00000 {
 			usb1: usb@3000000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x3000000 0x0 0x10000>;
-				interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
@@ -839,7 +839,7 @@  usb1: usb@3000000 {
 			usb2: usb@3100000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x3100000 0x0 0x10000>;
-				interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
@@ -853,7 +853,7 @@  sata: sata@3200000 {
 				reg = <0x0 0x3200000 0x0 0x10000>,
 					<0x0 0x20140520 0x0 0x4>;
 				reg-names = "ahci", "sata-ecc";
-				interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 						    QORIQ_CLK_PLL_DIV(1)>;
 				dma-coherent;
@@ -864,21 +864,21 @@  msi1: msi-controller1@1571000 {
 			compatible = "fsl,ls1043a-msi";
 			reg = <0x0 0x1571000 0x0 0x8>;
 			msi-controller;
-			interrupts = <0 116 0x4>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		msi2: msi-controller2@1572000 {
 			compatible = "fsl,ls1043a-msi";
 			reg = <0x0 0x1572000 0x0 0x8>;
 			msi-controller;
-			interrupts = <0 126 0x4>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		msi3: msi-controller3@1573000 {
 			compatible = "fsl,ls1043a-msi";
 			reg = <0x0 0x1573000 0x0 0x8>;
 			msi-controller;
-			interrupts = <0 160 0x4>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pcie1: pcie@3400000 {
@@ -886,8 +886,8 @@  pcie1: pcie@3400000 {
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 118 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -913,8 +913,8 @@  pcie2: pcie@3500000 {
 			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
 			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -940,8 +940,8 @@  pcie3: pcie@3600000 {
 			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
 			      <0x50 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 161 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 162 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 754a64be739c..e5fcfc690ffc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -441,7 +441,7 @@  clockgen: clocking@1ee1000 {
 		tmu: tmu@1f00000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f00000 0x0 0x10000>;
-			interrupts = <0 33 0x4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 604bf88d70b3..91589b907ec8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -118,7 +118,7 @@  gic: interrupt-controller@6000000 {
 		      <0x0 0x0c0c0000 0 0x2000>, /* GICC */
 		      <0x0 0x0c0d0000 0 0x1000>, /* GICH */
 		      <0x0 0x0c0e0000 0 0x20000>; /* GICV */
-		interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -183,10 +183,10 @@  soc-crit {
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
-			     <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
-			     <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
-			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
 	};
 
 	pmu {
@@ -280,7 +280,7 @@  sfp: efuse@1e80000 {
 		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
-			interrupts = <0 23 0x4>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
@@ -347,7 +347,7 @@  duart0: serial@21c0500 {
 			reg = <0x0 0x21c0500 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
@@ -356,14 +356,14 @@  duart1: serial@21c0600 {
 			reg = <0x0 0x21c0600 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
 		gpio0: gpio@2300000 {
 			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
-			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -374,7 +374,7 @@  gpio0: gpio@2300000 {
 		gpio1: gpio@2310000 {
 			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
-			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -385,7 +385,7 @@  gpio1: gpio@2310000 {
 		gpio2: gpio@2320000 {
 			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
-			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -396,7 +396,7 @@  gpio2: gpio@2320000 {
 		gpio3: gpio@2330000 {
 			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
-			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -407,7 +407,7 @@  gpio3: gpio@2330000 {
 		ifc: memory-controller@2240000 {
 			compatible = "fsl,ifc";
 			reg = <0x0 0x2240000 0x0 0x20000>;
-			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			#address-cells = <2>;
 			#size-cells = <1>;
@@ -419,7 +419,7 @@  i2c0: i2c@2000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2000000 0x0 0x10000>;
-			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(8)>;
 			status = "disabled";
@@ -430,7 +430,7 @@  i2c1: i2c@2010000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2010000 0x0 0x10000>;
-			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(8)>;
 			status = "disabled";
@@ -441,7 +441,7 @@  i2c2: i2c@2020000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2020000 0x0 0x10000>;
-			interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(8)>;
 			status = "disabled";
@@ -452,7 +452,7 @@  i2c3: i2c@2030000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2030000 0x0 0x10000>;
-			interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(8)>;
 			status = "disabled";
@@ -477,7 +477,7 @@  QORIQ_CLK_PLL_DIV(4)>,
 		esdhc: esdhc@2140000 {
 			compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
-			interrupts = <0 28 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>;
 			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
 			voltage-ranges = <1800 1800 3300 3300>;
@@ -490,7 +490,7 @@  esdhc: esdhc@2140000 {
 		usb0: usb@3100000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
-			interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
@@ -501,7 +501,7 @@  usb0: usb@3100000 {
 		usb1: usb@3110000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3110000 0x0 0x10000>;
-			interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
@@ -514,7 +514,7 @@  sata: sata@3200000 {
 			reg = <0x0 0x3200000 0x0 0x10000>,
 				<0x7 0x100520 0x0 0x4>;
 			reg-names = "ahci", "sata-ecc";
-			interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			dma-coherent;
@@ -565,7 +565,7 @@  pcie1: pcie@3400000 {
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 			      <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
 			interrupt-names = "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -604,7 +604,7 @@  pcie2: pcie@3500000 {
 			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
 			      <0x28 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
 			interrupt-names = "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -642,7 +642,7 @@  pcie3: pcie@3600000 {
 			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
 			      <0x30 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
 			interrupt-names = "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 8352197cea6f..e9bc1f4fa13c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -15,7 +15,7 @@ 
 / {
 	pmu {
 		compatible = "arm,cortex-a57-pmu";
-		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
index 245bbd615c81..60c422560e33 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -15,7 +15,7 @@ 
 / {
 	pmu {
 		compatible = "arm,cortex-a72-pmu";
-		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index ccba0a135b24..cc305e629bdc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -58,7 +58,7 @@  gic: interrupt-controller@6000000 {
 		#size-cells = <2>;
 		ranges;
 		interrupt-controller;
-		interrupts = <1 9 0x4>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
 		its: msi-controller@6020000 {
 			compatible = "arm,gic-v3-its";
@@ -314,7 +314,7 @@  extirq: interrupt-controller@14 {
 		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
-			interrupts = <0 23 0x4>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
 			fsl,tmu-calibration =
 					<0x00000000 0x00000026>,
@@ -362,7 +362,7 @@  serial0: serial@21c0500 {
 			reg = <0x0 0x21c0500 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 32 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial1: serial@21c0600 {
@@ -370,7 +370,7 @@  serial1: serial@21c0600 {
 			reg = <0x0 0x21c0600 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 32 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial2: serial@21d0500 {
@@ -378,7 +378,7 @@  serial2: serial@21d0500 {
 			reg = <0x0 0x21d0500 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 33 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial3: serial@21d0600 {
@@ -386,7 +386,7 @@  serial3: serial@21d0600 {
 			reg = <0x0 0x21d0600 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 33 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		cluster1_core0_watchdog: wdt@c000000 {
@@ -883,48 +883,48 @@  smmu: iommu@5000000 {
 			#iommu-cells = <1>;
 			stream-match-mask = <0x7C00>;
 			dma-coherent;
-			interrupts = <0 13 4>, /* global secure fault */
-				     <0 14 4>, /* combined secure interrupt */
-				     <0 15 4>, /* global non-secure fault */
-				     <0 16 4>, /* combined non-secure interrupt */
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* global secure fault */
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* combined secure interrupt */
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, /* global non-secure fault */
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, /* combined non-secure interrupt */
 				/* performance counter interrupts 0-7 */
-				     <0 211 4>, <0 212 4>,
-				     <0 213 4>, <0 214 4>,
-				     <0 215 4>, <0 216 4>,
-				     <0 217 4>, <0 218 4>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
 				/* per context interrupt, 64 interrupts */
-				     <0 146 4>, <0 147 4>,
-				     <0 148 4>, <0 149 4>,
-				     <0 150 4>, <0 151 4>,
-				     <0 152 4>, <0 153 4>,
-				     <0 154 4>, <0 155 4>,
-				     <0 156 4>, <0 157 4>,
-				     <0 158 4>, <0 159 4>,
-				     <0 160 4>, <0 161 4>,
-				     <0 162 4>, <0 163 4>,
-				     <0 164 4>, <0 165 4>,
-				     <0 166 4>, <0 167 4>,
-				     <0 168 4>, <0 169 4>,
-				     <0 170 4>, <0 171 4>,
-				     <0 172 4>, <0 173 4>,
-				     <0 174 4>, <0 175 4>,
-				     <0 176 4>, <0 177 4>,
-				     <0 178 4>, <0 179 4>,
-				     <0 180 4>, <0 181 4>,
-				     <0 182 4>, <0 183 4>,
-				     <0 184 4>, <0 185 4>,
-				     <0 186 4>, <0 187 4>,
-				     <0 188 4>, <0 189 4>,
-				     <0 190 4>, <0 191 4>,
-				     <0 192 4>, <0 193 4>,
-				     <0 194 4>, <0 195 4>,
-				     <0 196 4>, <0 197 4>,
-				     <0 198 4>, <0 199 4>,
-				     <0 200 4>, <0 201 4>,
-				     <0 202 4>, <0 203 4>,
-				     <0 204 4>, <0 205 4>,
-				     <0 206 4>, <0 207 4>,
-				     <0 208 4>, <0 209 4>;
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		dspi: spi@2100000 {
@@ -933,7 +933,7 @@  dspi: spi@2100000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2100000 0x0 0x10000>;
-			interrupts = <0 26 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			clock-names = "dspi";
@@ -944,7 +944,7 @@  esdhc: esdhc@2140000 {
 			status = "disabled";
 			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
-			interrupts = <0 28 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			voltage-ranges = <1800 1800 3300 3300>;
@@ -956,7 +956,7 @@  esdhc: esdhc@2140000 {
 		gpio0: gpio@2300000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
-			interrupts = <0 36 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
@@ -967,7 +967,7 @@  gpio0: gpio@2300000 {
 		gpio1: gpio@2310000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
-			interrupts = <0 36 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
@@ -978,7 +978,7 @@  gpio1: gpio@2310000 {
 		gpio2: gpio@2320000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
-			interrupts = <0 37 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
@@ -989,7 +989,7 @@  gpio2: gpio@2320000 {
 		gpio3: gpio@2330000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
-			interrupts = <0 37 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
@@ -1003,7 +1003,7 @@  i2c0: i2c@2000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2000000 0x0 0x10000>;
-			interrupts = <0 34 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
@@ -1015,7 +1015,7 @@  i2c1: i2c@2010000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2010000 0x0 0x10000>;
-			interrupts = <0 34 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
@@ -1027,7 +1027,7 @@  i2c2: i2c@2020000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2020000 0x0 0x10000>;
-			interrupts = <0 35 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
@@ -1039,7 +1039,7 @@  i2c3: i2c@2030000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2030000 0x0 0x10000>;
-			interrupts = <0 35 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
@@ -1048,7 +1048,7 @@  i2c3: i2c@2030000 {
 		ifc: memory-controller@2240000 {
 			compatible = "fsl,ifc";
 			reg = <0x0 0x2240000 0x0 0x20000>;
-			interrupts = <0 21 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			#address-cells = <2>;
 			#size-cells = <1>;
@@ -1077,7 +1077,7 @@  QORIQ_CLK_PLL_DIV(4)>,
 		pcie1: pcie@3400000 {
 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 108 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -1099,7 +1099,7 @@  pcie1: pcie@3400000 {
 		pcie2: pcie@3500000 {
 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 113 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -1121,7 +1121,7 @@  pcie2: pcie@3500000 {
 		pcie3: pcie@3600000 {
 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 118 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -1143,7 +1143,7 @@  pcie3: pcie@3600000 {
 		pcie4: pcie@3700000 {
 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 123 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -1166,7 +1166,7 @@  sata0: sata@3200000 {
 			status = "disabled";
 			compatible = "fsl,ls2080a-ahci";
 			reg = <0x0 0x3200000 0x0 0x10000>;
-			interrupts = <0 133 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			dma-coherent;
@@ -1176,7 +1176,7 @@  sata1: sata@3210000 {
 			status = "disabled";
 			compatible = "fsl,ls2080a-ahci";
 			reg = <0x0 0x3210000 0x0 0x10000>;
-			interrupts = <0 136 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			dma-coherent;
@@ -1192,7 +1192,7 @@  bus: bus {
 			usb0: usb@3100000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x3100000 0x0 0x10000>;
-				interrupts = <0 80 0x4>; /* Level high type */
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
@@ -1203,7 +1203,7 @@  usb0: usb@3100000 {
 			usb1: usb@3110000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x3110000 0x0 0x10000>;
-				interrupts = <0 81 0x4>; /* Level high type */
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
@@ -1215,7 +1215,7 @@  usb1: usb@3110000 {
 		ccn@4000000 {
 			compatible = "arm,ccn-504";
 			reg = <0x0 0x04000000 0x0 0x01000000>;
-			interrupts = <0 12 4>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		rcpm: power-controller@1e34040 {
@@ -1236,14 +1236,14 @@  ftm_alarm0: timer@2800000 {
 	ddr1: memory-controller@1080000 {
 		compatible = "fsl,qoriq-memory-controller";
 		reg = <0x0 0x1080000 0x0 0x1000>;
-		interrupts = <0 17 0x4>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		little-endian;
 	};
 
 	ddr2: memory-controller@1090000 {
 		compatible = "fsl,qoriq-memory-controller";
 		reg = <0x0 0x1090000 0x0 0x1000>;
-		interrupts = <0 18 0x4>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 		little-endian;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 96055593204a..eaa7d8c70964 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -928,7 +928,7 @@  dspi2: spi@2120000 {
 		esdhc0: esdhc@2140000 {
 			compatible = "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
-			interrupts = <0 28 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			dma-coherent;
@@ -942,7 +942,7 @@  esdhc0: esdhc@2140000 {
 		esdhc1: esdhc@2150000 {
 			compatible = "fsl,esdhc";
 			reg = <0x0 0x2150000 0x0 0x10000>;
-			interrupts = <0 63 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			dma-coherent;