mbox series

[v2,0/3] arm64: dts: qcom: x1e80100: Describe 3 USB Type-C connectors currently used

Message ID 20240606-x1e80100-dts-pmic-glink-v2-0-972c902e3e6b@linaro.org (mailing list archive)
Headers show
Series arm64: dts: qcom: x1e80100: Describe 3 USB Type-C connectors currently used | expand

Message

Abel Vesa June 6, 2024, 10:41 a.m. UTC
Both QCP and CRD boards using X Elite (x1e80100) make use of 3 USB
Type-C ports (USB1 SS0, SS1, and SS2). Describe the graph for the USB
part of each one of them for now. The DP port will come at a later stage
since there are some muxes/retimers involved, depending on the type of
board.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
Changes in v2:
- Rebased on today's -next which already defines parts of the graph in
  SoC file.
- Described the connectors for the CRD, like Konrad suggested.
- Dropped the remote endpoints assignments from board files as they are
  already described in SoC file.
- Re-worded the commit message to talk about the plural w.r.t. DP ports.
- Link to v1: https://lore.kernel.org/r/20240527-x1e80100-dts-pmic-glink-v1-0-7ea5c8eb4d2b@linaro.org

---
Abel Vesa (3):
      arm64: dts: qcom: x1e80100: Add remote endpoints between PHYs and DPs
      arm64: dts: qcom: x1e80100-crd: Add pmic-glink node with all 3 connectors
      arm64: dts: qcom: x1e80100-qcp: Add pmic-glink node with all 3 connectors

 arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 122 ++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 119 +++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/x1e80100.dtsi    |   9 +++
 3 files changed, 250 insertions(+)
---
base-commit: ee78a17615ad0cfdbbc27182b1047cd36c9d4d5f
change-id: 20231214-x1e80100-dts-pmic-glink-65e351579b8b

Best regards,

Comments

Bjorn Andersson June 7, 2024, 2:33 a.m. UTC | #1
On Thu, 06 Jun 2024 13:41:51 +0300, Abel Vesa wrote:
> Both QCP and CRD boards using X Elite (x1e80100) make use of 3 USB
> Type-C ports (USB1 SS0, SS1, and SS2). Describe the graph for the USB
> part of each one of them for now. The DP port will come at a later stage
> since there are some muxes/retimers involved, depending on the type of
> board.
> 
> 
> [...]

Applied, thanks!

[1/3] arm64: dts: qcom: x1e80100: Add remote endpoints between PHYs and DPs
      commit: aa48a8a5d642b5806a7bdae52457c87fee3118f8
[2/3] arm64: dts: qcom: x1e80100-crd: Add pmic-glink node with all 3 connectors
      commit: 24b7616a1cd3eeefa91417afc1467981c4cbaf61
[3/3] arm64: dts: qcom: x1e80100-qcp: Add pmic-glink node with all 3 connectors
      commit: 830a24be7dc1711c4e5be82cb319b575af7760f8

Best regards,