| Message ID | 20240604011157.2358019-4-quic_sibis@quicinc.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | arm64: dts: qcom: x1e80100: Enable bwmon and fastrpc support | expand |
On 6/4/2024 6:41 AM, Sibi Sankar wrote: > Add the CPU and LLCC BWMONs on X1E80100 SoCs. > > Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> > --- > arch/arm64/boot/dts/qcom/x1e80100.dtsi | 169 +++++++++++++++++++++++++ > 1 file changed, 169 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi > index 1929c34ae70a..d86c4d3be126 100644 > --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi > +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi > @@ -5329,6 +5329,175 @@ cpu_scp_lpri1: scp-sram-section@200 { > }; > }; > > + pmu@24091000 { > + compatible = "qcom,x1e80100-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; > + reg = <0 0x24091000 0 0x1000>; > + > + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; > + > + interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>; > + > + operating-points-v2 = <&llcc_bwmon_opp_table>; > + > + llcc_bwmon_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-0 { Nitpick,In one table, we start from ‘opp-0,’ while in the other table, it begins with ‘opp-1,it is better to make it consistent across table. > + opp-peak-kBps = <800000>; > + }; > + > + opp-1 { > + opp-peak-kBps = <2188000>; > + }; > + > + opp-2 { > + opp-peak-kBps = <3072000>; > + }; > + > + opp-3 { > + opp-peak-kBps = <6220800>; > + }; > + > + opp-4 { > + opp-peak-kBps = <6835200>; > + }; > + > + opp-5 { > + opp-peak-kBps = <8371200>; > + }; > + > + opp-6 { > + opp-peak-kBps = <10944000>; > + }; > + > + opp-7 { > + opp-peak-kBps = <12748800>; > + }; > + > + opp-8 { > + opp-peak-kBps = <14745600>; > + }; > + > + opp-9 { > + opp-peak-kBps = <16896000>; > + }; > + }; > + }; > + > + pmu@240b3400 { > + compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon"; > + reg = <0 0x240b3400 0 0x600>; > + > + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; > + > + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; > + operating-points-v2 = <&cpu0_bwmon_opp_table>; > + > + cpu0_bwmon_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-1 { > + opp-peak-kBps = <4800000>; > + }; > + > + opp-2 { > + opp-peak-kBps = <7464000>; > + }; > + > + opp-3 { > + opp-peak-kBps = <9600000>; > + }; > + > + opp-4 { > + opp-peak-kBps = <12896000>; > + }; > + > + opp-5 { > + opp-peak-kBps = <14928000>; > + }; > + > + opp-6 { > + opp-peak-kBps = <17064000>; > + }; > + }; > + }; > + > + pmu@240b5400 { > + compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon"; > + reg = <0 0x240b5400 0 0x600>; > + > + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; > + > + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; > + operating-points-v2 = <&cpu8_bwmon_opp_table>; > + > + cpu8_bwmon_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-1 { > + opp-peak-kBps = <4800000>; > + }; > + > + opp-2 { > + opp-peak-kBps = <7464000>; > + }; > + > + opp-3 { > + opp-peak-kBps = <9600000>; > + }; > + > + opp-4 { > + opp-peak-kBps = <12896000>; > + }; > + > + opp-5 { > + opp-peak-kBps = <14928000>; > + }; > + > + opp-6 { > + opp-peak-kBps = <17064000>; > + }; > + }; > + }; > + > + pmu@240b6400 { > + compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon"; > + reg = <0 0x240b6400 0 0x600>; > + > + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; > + > + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; > + operating-points-v2 = <&cpu4_bwmon_opp_table>; > + > + cpu4_bwmon_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-1 { > + opp-peak-kBps = <4800000>; > + }; > + > + opp-2 { > + opp-peak-kBps = <7464000>; > + }; > + > + opp-3 { > + opp-peak-kBps = <9600000>; > + }; > + > + opp-4 { > + opp-peak-kBps = <12896000>; > + }; > + > + opp-5 { > + opp-peak-kBps = <14928000>; > + }; > + > + opp-6 { > + opp-peak-kBps = <17064000>; > + }; > + }; > + }; > + > system-cache-controller@25000000 { > compatible = "qcom,x1e80100-llcc"; > reg = <0 0x25000000 0 0x200000>, Thanks, Shivnandan
On 4.06.2024 3:11 AM, Sibi Sankar wrote: > Add the CPU and LLCC BWMONs on X1E80100 SoCs. > > Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> > --- > arch/arm64/boot/dts/qcom/x1e80100.dtsi | 169 +++++++++++++++++++++++++ > 1 file changed, 169 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi > index 1929c34ae70a..d86c4d3be126 100644 > --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi > +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi > @@ -5329,6 +5329,175 @@ cpu_scp_lpri1: scp-sram-section@200 { > }; > }; > > + pmu@24091000 { > + compatible = "qcom,x1e80100-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; > + reg = <0 0x24091000 0 0x1000>; > + > + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; > + > + interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>; QCOM_ICC_TAG_ACTIVE_ONLY [...] > + > + cpu0_bwmon_opp_table: opp-table { > + compatible = "operating-points-v2"; I *think* if you add opp-shared here, you can reference the same OPP table from all 3 BWMONs without anything exploding. Konrad
On 6/6/24 14:39, Shivnandan Kumar wrote: > > > On 6/4/2024 6:41 AM, Sibi Sankar wrote: >> Add the CPU and LLCC BWMONs on X1E80100 SoCs. >> >> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> Hey Shiv, Thanks for taking time to review the series :) >> --- >> arch/arm64/boot/dts/qcom/x1e80100.dtsi | 169 +++++++++++++++++++++++++ >> 1 file changed, 169 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi >> b/arch/arm64/boot/dts/qcom/x1e80100.dtsi >> index 1929c34ae70a..d86c4d3be126 100644 >> --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi >> +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi >> @@ -5329,6 +5329,175 @@ cpu_scp_lpri1: scp-sram-section@200 { >> }; >> }; >> + pmu@24091000 { >> + compatible = "qcom,x1e80100-llcc-bwmon", >> "qcom,sc7280-llcc-bwmon"; >> + reg = <0 0x24091000 0 0x1000>; >> + >> + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; >> + >> + interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt >> SLAVE_EBI1 3>; >> + >> + operating-points-v2 = <&llcc_bwmon_opp_table>; >> + >> + llcc_bwmon_opp_table: opp-table { >> + compatible = "operating-points-v2"; >> + >> + opp-0 { > > Nitpick,In one table, we start from ‘opp-0,’ while in the other table, > it begins with ‘opp-1,it is better to make it consistent across table. > Will fix it in the next re-spin. -Sibi >> + opp-peak-kBps = <800000>; >> reg = <0 0x25000000 0 0x200000>, ... [snip] ... > > > Thanks, > Shivnandan
On 6/6/24 15:26, Konrad Dybcio wrote: > On 4.06.2024 3:11 AM, Sibi Sankar wrote: >> Add the CPU and LLCC BWMONs on X1E80100 SoCs. Hey Konrad, Thanks for taking time to review the series :) >> >> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/x1e80100.dtsi | 169 +++++++++++++++++++++++++ >> 1 file changed, 169 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi >> index 1929c34ae70a..d86c4d3be126 100644 >> --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi >> +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi >> @@ -5329,6 +5329,175 @@ cpu_scp_lpri1: scp-sram-section@200 { >> }; >> }; >> >> + pmu@24091000 { >> + compatible = "qcom,x1e80100-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; >> + reg = <0 0x24091000 0 0x1000>; >> + >> + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; >> + >> + interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>; > > QCOM_ICC_TAG_ACTIVE_ONLY ack > > [...] > >> + >> + cpu0_bwmon_opp_table: opp-table { >> + compatible = "operating-points-v2"; > > I *think* if you add opp-shared here, you can reference the same OPP table > from all 3 BWMONs without anything exploding. I did try this out before IIRC this resulted in just one device vote in the interconnect_summary. Didn't investigate further before because it was breaking bindings anyway. Will have another look at it. -Sibi > > Konrad
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index 1929c34ae70a..d86c4d3be126 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -5329,6 +5329,175 @@ cpu_scp_lpri1: scp-sram-section@200 { }; }; + pmu@24091000 { + compatible = "qcom,x1e80100-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; + reg = <0 0x24091000 0 0x1000>; + + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <800000>; + }; + + opp-1 { + opp-peak-kBps = <2188000>; + }; + + opp-2 { + opp-peak-kBps = <3072000>; + }; + + opp-3 { + opp-peak-kBps = <6220800>; + }; + + opp-4 { + opp-peak-kBps = <6835200>; + }; + + opp-5 { + opp-peak-kBps = <8371200>; + }; + + opp-6 { + opp-peak-kBps = <10944000>; + }; + + opp-7 { + opp-peak-kBps = <12748800>; + }; + + opp-8 { + opp-peak-kBps = <14745600>; + }; + + opp-9 { + opp-peak-kBps = <16896000>; + }; + }; + }; + + pmu@240b3400 { + compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x240b3400 0 0x600>; + + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; + operating-points-v2 = <&cpu0_bwmon_opp_table>; + + cpu0_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-1 { + opp-peak-kBps = <4800000>; + }; + + opp-2 { + opp-peak-kBps = <7464000>; + }; + + opp-3 { + opp-peak-kBps = <9600000>; + }; + + opp-4 { + opp-peak-kBps = <12896000>; + }; + + opp-5 { + opp-peak-kBps = <14928000>; + }; + + opp-6 { + opp-peak-kBps = <17064000>; + }; + }; + }; + + pmu@240b5400 { + compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x240b5400 0 0x600>; + + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; + operating-points-v2 = <&cpu8_bwmon_opp_table>; + + cpu8_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-1 { + opp-peak-kBps = <4800000>; + }; + + opp-2 { + opp-peak-kBps = <7464000>; + }; + + opp-3 { + opp-peak-kBps = <9600000>; + }; + + opp-4 { + opp-peak-kBps = <12896000>; + }; + + opp-5 { + opp-peak-kBps = <14928000>; + }; + + opp-6 { + opp-peak-kBps = <17064000>; + }; + }; + }; + + pmu@240b6400 { + compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x240b6400 0 0x600>; + + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; + operating-points-v2 = <&cpu4_bwmon_opp_table>; + + cpu4_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-1 { + opp-peak-kBps = <4800000>; + }; + + opp-2 { + opp-peak-kBps = <7464000>; + }; + + opp-3 { + opp-peak-kBps = <9600000>; + }; + + opp-4 { + opp-peak-kBps = <12896000>; + }; + + opp-5 { + opp-peak-kBps = <14928000>; + }; + + opp-6 { + opp-peak-kBps = <17064000>; + }; + }; + }; + system-cache-controller@25000000 { compatible = "qcom,x1e80100-llcc"; reg = <0 0x25000000 0 0x200000>,
Add the CPU and LLCC BWMONs on X1E80100 SoCs. Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> --- arch/arm64/boot/dts/qcom/x1e80100.dtsi | 169 +++++++++++++++++++++++++ 1 file changed, 169 insertions(+)