diff mbox series

[v2,2/3] spi: dt-bindings: fsl-dspi: Convert to yaml format

Message ID 20240613-ls_qspi-v2-2-b288f6f5b736@nxp.com (mailing list archive)
State New, archived
Headers show
Series spi: fsl-dspi: Convert to yaml format and use common SPI property | expand

Commit Message

Frank Li June 13, 2024, 7 p.m. UTC 
Convert dt-binding spi-fsl-dspi.txt to yaml format.

Addtional changes during convert:
- compatible string "fsl,ls1028a-dspi" can be followed by
fsl,ls1021a-v1.0-dspi.
- Change "dspi0@4002c000" to "spi@4002c000" in example.
- Reorder properties in example.
- Use GIC include in example.
- Remove fsl,spi-cs-sck-delay and fsl,spi-sck-cs-delay by use common SPI
property.
- Use compatible string 'jedec,spi-nor' in example.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../devicetree/bindings/spi/fsl,dspi.yaml          | 115 +++++++++++++++++++++
 .../devicetree/bindings/spi/spi-fsl-dspi.txt       |  65 ------------
 2 files changed, 115 insertions(+), 65 deletions(-)

Comments

Rob Herring (Arm) June 13, 2024, 8:17 p.m. UTC | #1 
On Thu, Jun 13, 2024 at 03:00:38PM -0400, Frank Li wrote:
> Convert dt-binding spi-fsl-dspi.txt to yaml format.
> 
> Addtional changes during convert:
> - compatible string "fsl,ls1028a-dspi" can be followed by
> fsl,ls1021a-v1.0-dspi.
> - Change "dspi0@4002c000" to "spi@4002c000" in example.
> - Reorder properties in example.
> - Use GIC include in example.
> - Remove fsl,spi-cs-sck-delay and fsl,spi-sck-cs-delay by use common SPI
> property.

You can't just remove them. These are mature platforms using them and 
replacing the properties would break kernels without your driver change. 
The only compatible change would be put both properties in the DT.

You need to pick up what Vladimir did:

https://lore.kernel.org/linux-spi/20221111224651.577729-1-vladimir.oltean@nxp.com/

> - Use compatible string 'jedec,spi-nor' in example.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  .../devicetree/bindings/spi/fsl,dspi.yaml          | 115 +++++++++++++++++++++
>  .../devicetree/bindings/spi/spi-fsl-dspi.txt       |  65 ------------
>  2 files changed, 115 insertions(+), 65 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/fsl,dspi.yaml b/Documentation/devicetree/bindings/spi/fsl,dspi.yaml
new file mode 100644
index 0000000000000..924ba19aea017
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/fsl,dspi.yaml
@@ -0,0 +1,115 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/fsl,dspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Freescale DSPI controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,vf610-dspi
+          - fsl,ls1021a-v1.0-dspi
+          - fsl,ls1012a-dspi
+          - fsl,ls1028a-dspi
+          - fsl,ls1043a-dspi
+          - fsl,ls1046a-dspi
+          - fsl,ls1088a-dspi
+          - fsl,ls2080a-dspi
+          - fsl,ls2085a-dspi
+          - fsl,lx2160a-dspi
+      - items:
+          - enum:
+              - fsl,ls1012a-dspi
+              - fsl,ls1028a-dspi
+              - fsl,ls1043a-dspi
+              - fsl,ls1046a-dspi
+              - fsl,ls1088a-dspi
+          - const: fsl,ls1021a-v1.0-dspi
+      - items:
+          - const: fsl,ls2080a-dspi
+          - const: fsl,ls2085a-dspi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: dspi
+
+  pinctrl-0: true
+
+  pinctrl-names:
+    items:
+      - const: default
+
+  spi-num-chipselects:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the number of the chipselect signals.
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If present the dspi device's registers are implemented
+      in big endian mode.
+
+  bus-num:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the slave chip chipselect signal number.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - pinctrl-0
+  - pinctrl-names
+  - spi-num-chipselects
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/vf610-clock.h>
+
+    spi@4002c000 {
+        compatible = "fsl,vf610-dspi";
+        reg = <0x4002c000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks VF610_CLK_DSPI0>;
+        clock-names = "dspi";
+        spi-num-chipselects = <5>;
+        bus-num = <0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_dspi0_1>;
+        big-endian;
+
+        flash@0 {
+                compatible = "jedec,spi-nor";
+                reg = <0>;
+                spi-max-frequency = <16000000>;
+                spi-cpol;
+                spi-cpha;
+                spi-cs-setup-delay-ns = <100>;
+                spi-cs-hold-delay-ns = <50>;
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
deleted file mode 100644
index 30a79da9c039d..0000000000000
--- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
+++ /dev/null
@@ -1,65 +0,0 @@ 
-ARM Freescale DSPI controller
-
-Required properties:
-- compatible : must be one of:
-	"fsl,vf610-dspi",
-	"fsl,ls1021a-v1.0-dspi",
-	"fsl,ls1012a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
-	"fsl,ls1028a-dspi",
-	"fsl,ls1043a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
-	"fsl,ls1046a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
-	"fsl,ls1088a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
-	"fsl,ls2080a-dspi" (optionally followed by "fsl,ls2085a-dspi"),
-	"fsl,ls2085a-dspi",
-	"fsl,lx2160a-dspi",
-- reg : Offset and length of the register set for the device
-- interrupts : Should contain SPI controller interrupt
-- clocks: from common clock binding: handle to dspi clock.
-- clock-names: from common clock binding: Shall be "dspi".
-- pinctrl-0: pin control group to be used for this controller.
-- pinctrl-names: must contain a "default" entry.
-- spi-num-chipselects : the number of the chipselect signals.
-
-Optional property:
-- big-endian: If present the dspi device's registers are implemented
-  in big endian mode.
-- bus-num : the slave chip chipselect signal number.
-
-Optional SPI slave node properties:
-- fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip
-  select and the start of clock signal, at the start of a transfer.
-- fsl,spi-sck-cs-delay: a delay in nanoseconds between stopping the clock
-  signal and deactivating chip select, at the end of a transfer.
-
-Example:
-
-dspi0@4002c000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,vf610-dspi";
-	reg = <0x4002c000 0x1000>;
-	interrupts = <0 67 0x04>;
-	clocks = <&clks VF610_CLK_DSPI0>;
-	clock-names = "dspi";
-	spi-num-chipselects = <5>;
-	bus-num = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_dspi0_1>;
-	big-endian;
-
-	sflash: at26df081a@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "atmel,at26df081a";
-		spi-max-frequency = <16000000>;
-		spi-cpol;
-		spi-cpha;
-		reg = <0>;
-		linux,modalias = "m25p80";
-		modal = "at26df081a";
-		fsl,spi-cs-sck-delay = <100>;
-		fsl,spi-sck-cs-delay = <50>;
-	};
-};
-
-