diff mbox series

[net-next,1/2] net: phy: introduce core support for phy-mode = "10g-qxgmii"

Message ID 20240612095317.1261855-2-quic_luoj@quicinc.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series Introduce PHY mode 10G-QXGMII | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Clearly marked for net-next
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 1279 this patch: 1279
netdev/build_tools success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers success CCed 9 of 9 maintainers
netdev/build_clang success Errors and warnings before: 867 this patch: 867
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 1290 this patch: 1290
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 90 lines checked
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 84 this patch: 84
netdev/source_inline success Was 0 now: 0
netdev/contest success net-next-2024-06-13--12-00 (tests: 644)

Commit Message

Jie Luo June 12, 2024, 9:53 a.m. UTC 
From: Vladimir Oltean <vladimir.oltean@nxp.com>

10G-QXGMII is a MAC-to-PHY interface defined by the USXGMII multiport
specification. It uses the same signaling as USXGMII, but it multiplexes
4 ports over the link, resulting in a maximum speed of 2.5G per port.

Some in-tree SoCs like the NXP LS1028A use "usxgmii" when they mean
either the single-port USXGMII or the quad-port 10G-QXGMII variant, and
they could get away just fine with that thus far. But there is a need to
distinguish between the 2 as far as SerDes drivers are concerned.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 Documentation/networking/phy.rst |  6 ++++++
 drivers/net/phy/phy-core.c       |  1 +
 drivers/net/phy/phylink.c        | 12 ++++++++++--
 include/linux/phy.h              |  4 ++++
 include/linux/phylink.h          |  1 +
 5 files changed, 22 insertions(+), 2 deletions(-)

Comments

Russell King (Oracle) June 13, 2024, 7:54 a.m. UTC | #1 
On Wed, Jun 12, 2024 at 05:53:16PM +0800, Luo Jie wrote:
> @@ -1865,7 +1872,8 @@ static int phylink_validate_phy(struct phylink *pl, struct phy_device *phy,
>  	if (phy->is_c45 && state->rate_matching == RATE_MATCH_NONE &&
>  	    state->interface != PHY_INTERFACE_MODE_RXAUI &&
>  	    state->interface != PHY_INTERFACE_MODE_XAUI &&
> -	    state->interface != PHY_INTERFACE_MODE_USXGMII)
> +	    state->interface != PHY_INTERFACE_MODE_USXGMII &&
> +	    state->interface != PHY_INTERFACE_MODE_10G_QXGMII)
>  		state->interface = PHY_INTERFACE_MODE_NA;

It would be better, rather than extending this workaround, instead to
have the PHY driver set phy->possible_interfaces in its .config_init
method. phy->possible_interfaces should be the set of interfaces that
the PHY _will_ use given its configuration for the different media
speeds. I think that means just PHY_INTERFACE_MODE_10G_QXGMII for
your configuration.

Thanks.
Jie Luo June 14, 2024, 11:42 a.m. UTC | #2 
On 6/13/2024 3:54 PM, Russell King (Oracle) wrote:
> On Wed, Jun 12, 2024 at 05:53:16PM +0800, Luo Jie wrote:
>> @@ -1865,7 +1872,8 @@ static int phylink_validate_phy(struct phylink *pl, struct phy_device *phy,
>>   	if (phy->is_c45 && state->rate_matching == RATE_MATCH_NONE &&
>>   	    state->interface != PHY_INTERFACE_MODE_RXAUI &&
>>   	    state->interface != PHY_INTERFACE_MODE_XAUI &&
>> -	    state->interface != PHY_INTERFACE_MODE_USXGMII)
>> +	    state->interface != PHY_INTERFACE_MODE_USXGMII &&
>> +	    state->interface != PHY_INTERFACE_MODE_10G_QXGMII)
>>   		state->interface = PHY_INTERFACE_MODE_NA;
> 
> It would be better, rather than extending this workaround, instead to
> have the PHY driver set phy->possible_interfaces in its .config_init
> method. phy->possible_interfaces should be the set of interfaces that
> the PHY _will_ use given its configuration for the different media
> speeds. I think that means just PHY_INTERFACE_MODE_10G_QXGMII for
> your configuration.
> 
> Thanks.
> 

Hi Russell,

Yes, for QCA8084(pure PHY chip), only PHY_INTERFACE_MODE_10G_QXGMII will
be set to the phy->possible_interfaces when it works on the interface
mode PHY_INTERFACE_MODE_10G_QXGMII.

I will push a new patch series to remove PHY_INTERFACE_MODE_10G_QXGMII
from this work-around validation here.

Thanks,
Jie
diff mbox series

Patch

diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst
index 1283240d7620..f64641417c54 100644
--- a/Documentation/networking/phy.rst
+++ b/Documentation/networking/phy.rst
@@ -327,6 +327,12 @@  Some of the interface modes are described below:
     This is the Penta SGMII mode, it is similar to QSGMII but it combines 5
     SGMII lines into a single link compared to 4 on QSGMII.
 
+``PHY_INTERFACE_MODE_10G_QXGMII``
+    Represents the 10G-QXGMII PHY-MAC interface as defined by the Cisco USXGMII
+    Multiport Copper Interface document. It supports 4 ports over a 10.3125 GHz
+    SerDes lane, each port having speeds of 2.5G / 1G / 100M / 10M achieved
+    through symbol replication. The PCS expects the standard USXGMII code word.
+
 Pause frames / flow control
 ===========================
 
diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index 15f349e5995a..a235ea2264a7 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -141,6 +141,7 @@  int phy_interface_num_ports(phy_interface_t interface)
 		return 1;
 	case PHY_INTERFACE_MODE_QSGMII:
 	case PHY_INTERFACE_MODE_QUSGMII:
+	case PHY_INTERFACE_MODE_10G_QXGMII:
 		return 4;
 	case PHY_INTERFACE_MODE_PSGMII:
 		return 5;
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 02427378acfd..bc07edb008f5 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -231,6 +231,7 @@  static int phylink_interface_max_speed(phy_interface_t interface)
 		return SPEED_1000;
 
 	case PHY_INTERFACE_MODE_2500BASEX:
+	case PHY_INTERFACE_MODE_10G_QXGMII:
 		return SPEED_2500;
 
 	case PHY_INTERFACE_MODE_5GBASER:
@@ -500,7 +501,11 @@  static unsigned long phylink_get_capabilities(phy_interface_t interface,
 
 	switch (interface) {
 	case PHY_INTERFACE_MODE_USXGMII:
-		caps |= MAC_10000FD | MAC_5000FD | MAC_2500FD;
+		caps |= MAC_10000FD | MAC_5000FD;
+		fallthrough;
+
+	case PHY_INTERFACE_MODE_10G_QXGMII:
+		caps |= MAC_2500FD;
 		fallthrough;
 
 	case PHY_INTERFACE_MODE_RGMII_TXID:
@@ -926,6 +931,7 @@  static int phylink_parse_mode(struct phylink *pl,
 		case PHY_INTERFACE_MODE_5GBASER:
 		case PHY_INTERFACE_MODE_25GBASER:
 		case PHY_INTERFACE_MODE_USXGMII:
+		case PHY_INTERFACE_MODE_10G_QXGMII:
 		case PHY_INTERFACE_MODE_10GKR:
 		case PHY_INTERFACE_MODE_10GBASER:
 		case PHY_INTERFACE_MODE_XLGMII:
@@ -1124,6 +1130,7 @@  static unsigned int phylink_pcs_neg_mode(unsigned int mode,
 	case PHY_INTERFACE_MODE_QSGMII:
 	case PHY_INTERFACE_MODE_QUSGMII:
 	case PHY_INTERFACE_MODE_USXGMII:
+	case PHY_INTERFACE_MODE_10G_QXGMII:
 		/* These protocols are designed for use with a PHY which
 		 * communicates its negotiation result back to the MAC via
 		 * inband communication. Note: there exist PHYs that run
@@ -1865,7 +1872,8 @@  static int phylink_validate_phy(struct phylink *pl, struct phy_device *phy,
 	if (phy->is_c45 && state->rate_matching == RATE_MATCH_NONE &&
 	    state->interface != PHY_INTERFACE_MODE_RXAUI &&
 	    state->interface != PHY_INTERFACE_MODE_XAUI &&
-	    state->interface != PHY_INTERFACE_MODE_USXGMII)
+	    state->interface != PHY_INTERFACE_MODE_USXGMII &&
+	    state->interface != PHY_INTERFACE_MODE_10G_QXGMII)
 		state->interface = PHY_INTERFACE_MODE_NA;
 
 	return phylink_validate(pl, supported, state);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index e6e83304558e..205fccfc0f60 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -128,6 +128,7 @@  extern const int phy_10gbit_features_array[1];
  * @PHY_INTERFACE_MODE_10GKR: 10GBASE-KR - with Clause 73 AN
  * @PHY_INTERFACE_MODE_QUSGMII: Quad Universal SGMII
  * @PHY_INTERFACE_MODE_1000BASEKX: 1000Base-KX - with Clause 73 AN
+ * @PHY_INTERFACE_MODE_10G_QXGMII: 10G-QXGMII - 4 ports over 10G USXGMII
  * @PHY_INTERFACE_MODE_MAX: Book keeping
  *
  * Describes the interface between the MAC and PHY.
@@ -168,6 +169,7 @@  typedef enum {
 	PHY_INTERFACE_MODE_10GKR,
 	PHY_INTERFACE_MODE_QUSGMII,
 	PHY_INTERFACE_MODE_1000BASEKX,
+	PHY_INTERFACE_MODE_10G_QXGMII,
 	PHY_INTERFACE_MODE_MAX,
 } phy_interface_t;
 
@@ -289,6 +291,8 @@  static inline const char *phy_modes(phy_interface_t interface)
 		return "100base-x";
 	case PHY_INTERFACE_MODE_QUSGMII:
 		return "qusgmii";
+	case PHY_INTERFACE_MODE_10G_QXGMII:
+		return "10g-qxgmii";
 	default:
 		return "unknown";
 	}
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index a30a692acc32..2381e07429a2 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -654,6 +654,7 @@  static inline int phylink_get_link_timer_ns(phy_interface_t interface)
 	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_QSGMII:
 	case PHY_INTERFACE_MODE_USXGMII:
+	case PHY_INTERFACE_MODE_10G_QXGMII:
 		return 1600000;
 
 	case PHY_INTERFACE_MODE_1000BASEX: