Message ID | 20240603140103.3845905-1-max.oss.09@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v1] arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin | expand |
On Mon, Jun 03, 2024 at 04:00:45PM +0200, max.oss.09@gmail.com wrote: > From: Max Krummenacher <max.krummenacher@toradex.com> > > SODIMM 17 can be used as an edge triggered interrupt supplied from an > off board source. > > Enable hysteresis on the pinmuxing to increase immunity against noise > on the signal. > > Fixes: 60f01b5b5c7d ("arm64: dts: imx8mm-verdin: update iomux configuration") > Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Applied, thanks!
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index 4768b05fd765..7a971b235283 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -935,7 +935,7 @@ pinctrl_gpio8: gpio8grp { /* Verdin GPIO_9_DSI (pulled-up as active-low) */ pinctrl_gpio_9_dsi: gpio9dsigrp { fsl,pins = - <MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x146>; /* SODIMM 17 */ + <MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x1c6>; /* SODIMM 17 */ }; /* Verdin GPIO_10_DSI (pulled-up as active-low) */