| Message ID | 20240514215740.940155-15-jsnow@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | qapi: new sphinx qapi domain pre-requisites | expand |
John Snow <jsnow@redhat.com> writes: > If we parse all examples as QMP, we need them to conform to a standard > so that they render correctly. Once the QMP lexer is active for > examples, these will produce warning messages and fail the build. > > The QMP lexer still supports elisions, but they must be represented as > the value "...", so two examples have been adjusted to support that > format here. I think this could use a bit more context. I believe you're referring to docs/sphinx/qmp_lexer.py. It describes itself as "a Sphinx extension that provides a QMP lexer for code blocks." "If we parse all examples as QMP" and "Once the QMP lexer is active for examples" suggests we're *not* using it for (some?) examples. So what are we using it for? > Signed-off-by: John Snow <jsnow@redhat.com> Patch looks lovely. Hat tip to Victor Toso, who fixed up most examples two years ago. Back then we couldn't decide how to do elisions, so we left some unfixed.
On Fri, Jun 14, 2024, 6:55 AM Markus Armbruster <armbru@redhat.com> wrote: > John Snow <jsnow@redhat.com> writes: > > > If we parse all examples as QMP, we need them to conform to a standard > > so that they render correctly. Once the QMP lexer is active for > > examples, these will produce warning messages and fail the build. > > > > The QMP lexer still supports elisions, but they must be represented as > > the value "...", so two examples have been adjusted to support that > > format here. > > I think this could use a bit more context. I believe you're referring > to docs/sphinx/qmp_lexer.py. It describes itself as "a Sphinx extension > that provides a QMP lexer for code blocks." > That's our guy! I explain its use a bit more in ... some other patch, somewhere... > "If we parse all examples as QMP" and "Once the QMP lexer is active for > examples" suggests we're *not* using it for (some?) examples. So what > are we using it for? > My incremental backup doc makes use of it; you have to "opt in" to using the QMP lexer instead of the generic lexer. The example conversion patch later in this series opts all of the qapi docs into using it. ((Later, it's possible to make "Example::" choose the QMP lexer by default on any of our generated QMP pages. (and opting out would require explicit code-block syntax with the lexer of choice named.))) > > Signed-off-by: John Snow <jsnow@redhat.com> > > Patch looks lovely. > > Hat tip to Victor Toso, who fixed up most examples two years ago. Back > then we couldn't decide how to do elisions, so we left some unfixed. > Sorry I didn't chime in back then! "..." is arbitrary, but it's what we already use for the qmp lexer and in the incremental backup/bitmap docs, so I figured consistency was good. The QMP lexer has syntax support for ->, <- and ... and otherwise requires the examples to be valid JSON. It doesn't understand grammar, though, so it's kind of "dumb", but this is one small protection. >
John Snow <jsnow@redhat.com> writes: > On Fri, Jun 14, 2024, 6:55 AM Markus Armbruster <armbru@redhat.com> wrote: > >> John Snow <jsnow@redhat.com> writes: >> >> > If we parse all examples as QMP, we need them to conform to a standard >> > so that they render correctly. Once the QMP lexer is active for >> > examples, these will produce warning messages and fail the build. >> > >> > The QMP lexer still supports elisions, but they must be represented as >> > the value "...", so two examples have been adjusted to support that >> > format here. >> >> I think this could use a bit more context. I believe you're referring >> to docs/sphinx/qmp_lexer.py. It describes itself as "a Sphinx extension >> that provides a QMP lexer for code blocks." >> > > That's our guy! I explain its use a bit more in ... some other patch, > somewhere... > > >> "If we parse all examples as QMP" and "Once the QMP lexer is active for >> examples" suggests we're *not* using it for (some?) examples. So what >> are we using it for? >> > > My incremental backup doc makes use of it; you have to "opt in" to using > the QMP lexer instead of the generic lexer. The ".. code-block:: QMP" lines I can see in a few files? Namely: docs/devel/s390-cpu-topology.rst docs/interop/bitmaps.rst docs/interop/qmp-spec.rst > The example conversion patch later in this series opts all of the qapi docs > into using it. > > ((Later, it's possible to make "Example::" choose the QMP lexer by default > on any of our generated QMP pages. (and opting out would require explicit > code-block syntax with the lexer of choice named.))) The patch does two related things: 1. Fix invalid JSON. Doesn't need justification. 2. Normalize elisions to ... You pick ... because that's what qmp_lexer.py wants. Doing both in one patch is fine. Perhaps qapi: Fix invalid JSON in examples, and normalize elisions A few examples elide part of the output. Normalize elision to exactly ... Together with the JSON fixing, this enables use of docs/sphinx/qmp_lexer.py to highlight the examples in a later patch. >> > Signed-off-by: John Snow <jsnow@redhat.com> >> >> Patch looks lovely. >> >> Hat tip to Victor Toso, who fixed up most examples two years ago. Back >> then we couldn't decide how to do elisions, so we left some unfixed. >> > > Sorry I didn't chime in back then! "..." is arbitrary, but it's what we > already use for the qmp lexer and in the incremental backup/bitmap docs, so > I figured consistency was good. It is. > The QMP lexer has syntax support for ->, <- and ... and otherwise requires > the examples to be valid JSON. It doesn't understand grammar, though, so > it's kind of "dumb", but this is one small protection.
diff --git a/qapi/control.json b/qapi/control.json index 6bdbf077c2e..10c906fa0e7 100644 --- a/qapi/control.json +++ b/qapi/control.json @@ -145,7 +145,8 @@ # }, # { # "name":"system_powerdown" -# } +# }, +# ... # ] # } # diff --git a/qapi/machine.json b/qapi/machine.json index bce6e1bbc41..64a77557571 100644 --- a/qapi/machine.json +++ b/qapi/machine.json @@ -1057,7 +1057,7 @@ # "vcpus-count": 1 }, # { "props": { "core-id": 0 }, "type": "POWER8-spapr-cpu-core", # "vcpus-count": 1, "qom-path": "/machine/unattached/device[0]"} -# ]}' +# ]} # # For pc machine type started with -smp 1,maxcpus=2: # diff --git a/qapi/migration.json b/qapi/migration.json index a351fd37143..89047d46c7c 100644 --- a/qapi/migration.json +++ b/qapi/migration.json @@ -2078,7 +2078,7 @@ # Example: # # -> {"execute": "calc-dirty-rate", "arguments": {"calc-time": 1, -# 'sample-pages': 512} } +# "sample-pages": 512} } # <- { "return": {} } # # Measure dirty rate using dirty bitmap for 500 milliseconds: diff --git a/qapi/misc.json b/qapi/misc.json index ec30e5c570a..4b41e15dcd4 100644 --- a/qapi/misc.json +++ b/qapi/misc.json @@ -287,7 +287,8 @@ # # Example: # -# -> { "execute": "get-win32-socket", "arguments": { "info": "abcd123..", fdname": "skclient" } } +# -> { "execute": "get-win32-socket", +# "arguments": { "info": "abcd123..", "fdname": "skclient" } } # <- { "return": {} } ## { 'command': 'get-win32-socket', 'data': {'info': 'str', 'fdname': 'str'}, 'if': 'CONFIG_WIN32' } diff --git a/qapi/net.json b/qapi/net.json index 0f5a259475e..c19df435a53 100644 --- a/qapi/net.json +++ b/qapi/net.json @@ -1003,9 +1003,9 @@ # # Example: # -# <- { 'event': 'NETDEV_STREAM_DISCONNECTED', -# 'data': {'netdev-id': 'netdev0'}, -# 'timestamp': {'seconds': 1663330937, 'microseconds': 526695} } +# <- { "event": "NETDEV_STREAM_DISCONNECTED", +# "data": {"netdev-id": "netdev0"}, +# "timestamp": {"seconds": 1663330937, "microseconds": 526695} } ## { 'event': 'NETDEV_STREAM_DISCONNECTED', 'data': { 'netdev-id': 'str' } } diff --git a/qapi/rocker.json b/qapi/rocker.json index 5635cf174fd..f5225eb62cc 100644 --- a/qapi/rocker.json +++ b/qapi/rocker.json @@ -250,7 +250,7 @@ # "action": {"goto-tbl": 10}, # "mask": {"in-pport": 4294901760} # }, -# {...more...}, +# {...}, # ]} ## { 'command': 'query-rocker-of-dpa-flows', diff --git a/qapi/ui.json b/qapi/ui.json index f610bce118a..c12f5292571 100644 --- a/qapi/ui.json +++ b/qapi/ui.json @@ -361,7 +361,7 @@ # "channel-id": 0, # "tls": false # }, -# [ ... more channels follow ... ] +# ... # ] # } # }
If we parse all examples as QMP, we need them to conform to a standard so that they render correctly. Once the QMP lexer is active for examples, these will produce warning messages and fail the build. The QMP lexer still supports elisions, but they must be represented as the value "...", so two examples have been adjusted to support that format here. Signed-off-by: John Snow <jsnow@redhat.com> --- qapi/control.json | 3 ++- qapi/machine.json | 2 +- qapi/migration.json | 2 +- qapi/misc.json | 3 ++- qapi/net.json | 6 +++--- qapi/rocker.json | 2 +- qapi/ui.json | 2 +- 7 files changed, 11 insertions(+), 9 deletions(-)