| Message ID | 34a16c6e513b32bc6111b695e1c8b467bd6993d9.1718749981.git.marcelo.schmitt@analog.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for AD4000 series of ADCs | expand |
On 6/18/24 6:12 PM, Marcelo Schmitt wrote: > Add device tree documentation for AD4000 series of ADC devices. > > Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4000-4004-4008.pdf > Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4001-4005.pdf > Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4002-4006-4010.pdf > Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4003-4007-4011.pdf > Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4020-4021-4022.pdf > Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4001.pdf > Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4003.pdf Datasheets URLs are listed in the patch, so probably don't need them in the commit message too. > > Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> > --- > .../bindings/iio/adc/adi,ad4000.yaml | 231 ++++++++++++++++++ > MAINTAINERS | 7 + > 2 files changed, 238 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml > new file mode 100644 > index 000000000000..ba50f9e0784b > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml > @@ -0,0 +1,231 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/adc/adi,ad4000.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices AD4000 and similar Analog to Digital Converters > + > +maintainers: > + - Marcelo Schmitt <marcelo.schmitt@analog.com> > + > +description: | > + Analog Devices AD4000 family of Analog to Digital Converters with SPI support. > + Specifications can be found at: > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4000-4004-4008.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4001-4005.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4002-4006-4010.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4003-4007-4011.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4020-4021-4022.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4001.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4003.pdf > + > +$ref: /schemas/spi/spi-peripheral-props.yaml# > + > +properties: > + compatible: > + oneOf: > + - const: adi,ad4000 > + - items: > + - enum: > + - adi,ad4004 > + - adi,ad4008 > + - const: adi,ad4000 > + - const: adi,ad4001 > + - items: > + - enum: > + - adi,ad4005 > + - const: adi,ad4001 > + - const: adi,ad4002 > + - items: > + - enum: > + - adi,ad4006 > + - adi,ad4010 > + - const: adi,ad4002 > + - const: adi,ad4003 > + - items: > + - enum: > + - adi,ad4007 > + - adi,ad4011 > + - const: adi,ad4003 > + - const: adi,ad4020 > + - items: > + - enum: > + - adi,ad4021 > + - adi,ad4022 > + - const: adi,ad4020 > + There are data sheets listed for adaq400x but no compatibles. > + reg: > + maxItems: 1 > + > + spi-max-frequency: > + maximum: 102040816 # for VIO > 2.7 V, 81300813 for VIO > 1.7 V > + > + adi,spi-mode: > + $ref: /schemas/types.yaml#/definitions/string > + enum: [ single, chain ] > + description: | > + This property indicates the SPI wiring configuration. > + > + When this property is omitted, it is assumed that the device is using what > + the datasheet calls "4-wire mode". This is the conventional SPI mode used > + when there are multiple devices on the same bus. In this mode, the CNV > + line is used to initiate the conversion and the SDI line is connected to > + CS on the SPI controller. > + > + When this property is present, it indicates that the device is using one > + of the following alternative wiring configurations: > + > + * single: The datasheet calls this "3-wire mode". (NOTE: The datasheet's > + definition of 3-wire mode is NOT at all related to the standard > + spi-3wire property!) This mode is often used when the ADC is the only > + device on the bus. In this mode, SDI is connected to MOSI or to VIO, and > + the CNV line can be connected to the CS line of the SPI controller or to > + a GPIO, in which case the CS line of the controller is unused. > + * chain: The datasheet calls this "chain mode". This mode is used to save > + on wiring when multiple ADCs are used. In this mode, the SDI line of > + one chip is tied to the SDO of the next chip in the chain and the SDI of > + the last chip in the chain is tied to GND. Only the first chip in the > + chain is connected to the SPI bus. The CNV line of all chips are tied > + together. The CS line of the SPI controller can be used as the CNV line > + only if it is active high. > + > + '#daisy-chained-devices': true > + > + vdd-supply: > + description: A 1.8V supply that powers the chip (VDD). > + > + vio-supply: > + description: > + A 1.8V to 5.5V supply for the digital inputs and outputs (VIO). > + > + ref-supply: > + description: > + A 2.5 to 5V supply for the external reference voltage (REF). > + > + cnv-gpios: > + description: > + The Convert Input (CNV). This input has multiple functions. It initiates > + the conversions and selects the SPI mode of the device (chain or CS). In > + 'single' mode, this property is omitted if the CNV pin is connected to the > + CS line of the SPI controller. > + maxItems: 1 > + > + adi,high-z-input: > + type: boolean > + description: > + High-Z mode allows the amplifier and RC filter in front of the ADC to be > + chosen based on the signal bandwidth of interest, rather than the settling > + requirements of the switched capacitor SAR ADC inputs. > + > + adi,gain-milli: > + description: | > + The hardware gain applied to the ADC input (in milli units). > + The gain provided by the ADC input scaler is defined by the hardware > + connections between chip pins OUT+, R1K-, R1K1-, R1K+, R1K1+, and OUT-. > + If not present, default to 1000 (no actual gain applied). > + $ref: /schemas/types.yaml#/definitions/uint16 Any particular reason why this needs to be uint16 instead of the more common uint32? > + enum: [454, 909, 1000, 1900] > + default: 1000 > + > + interrupts: > + description: > + The SDO pin can also function as a busy indicator. This node should be > + connected to an interrupt that is triggered when the SDO line goes low > + while the SDI line is high and the CNV line is low ('single' mode) or the > + SDI line is low and the CNV line is high ('multi' mode); or when the SDO > + line goes high while the SDI and CNV lines are high (chain mode), > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - vdd-supply > + - vio-supply > + - ref-supply > + > +allOf: > + # in '4-wire' mode, cnv-gpios is required, for other modes it is optional > + - if: > + not: > + required: > + - adi,spi-mode > + then: > + required: > + - cnv-gpios > + # The configuration register can only be accessed in '3-wire' mode > + - if: > + not: > + properties: > + adi,spi-mode: > + contains: > + enum: > + - single adi,spi-mode is not an array and we are only checking for one value, so this could be simplified to: properties: adi,spi-mode: const: single > + then: > + properties: > + adi,high-z-input: false > + # chain mode has lower SCLK max rate > + - if: > + required: > + - adi,spi-mode > + properties: > + adi,spi-mode: > + const: chain > + then: > + properties: > + spi-max-frequency: > + maximum: 50000000 # for VIO > 2.7 V, 40000000 for VIO > 1.7 V > + required: > + - '#daisy-chained-devices' > + else: > + properties: > + '#daisy-chained-devices': false > + # Gain property only applies to ADAQ devices > + - if: > + properties: > + compatible: > + not: > + contains: > + enum: > + - adi,adaq4001 > + - adi,adaq4003 > + then: > + properties: > + adi,gain-milli: false > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + /* Example for a AD devices */ Comments are a bit redundant since it says "examples:" above and the type of the chip in the compatible string. > + adc@0 { > + compatible = "adi,ad4020"; > + reg = <0>; > + spi-max-frequency = <71000000>; > + vdd-supply = <&supply_1_8V>; > + vio-supply = <&supply_1_8V>; > + ref-supply = <&supply_5V>; > + cnv-gpios = <&gpio0 88 GPIO_ACTIVE_HIGH>; > + }; > + }; > + - | > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + /* Example for a ADAQ devices */ > + adc@0 { > + compatible = "adi,adaq4003"; > + reg = <0>; > + spi-max-frequency = <80000000>; > + vdd-supply = <&supply_1_8V>; > + vio-supply = <&supply_1_8V>; > + ref-supply = <&supply_5V>; > + adi,high-z-input; > + adi,gain-milli = /bits/ 16 <454>; > + adi,spi-mode = "single"; > + }; > + }; > diff --git a/MAINTAINERS b/MAINTAINERS > index bff979a507ba..1f052b9cd912 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -1200,6 +1200,13 @@ W: https://ez.analog.com/linux-software-drivers > F: Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml > F: drivers/iio/dac/ad3552r.c > > +ANALOG DEVICES INC AD4000 DRIVER > +M: Marcelo Schmitt <marcelo.schmitt@analog.com> > +L: linux-iio@vger.kernel.org > +S: Supported > +W: https://ez.analog.com/linux-software-drivers > +F: Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml > + > ANALOG DEVICES INC AD4130 DRIVER > M: Cosmin Tanislav <cosmin.tanislav@analog.com> > L: linux-iio@vger.kernel.org
On 06/19, David Lechner wrote: > On 6/18/24 6:12 PM, Marcelo Schmitt wrote: > > Add device tree documentation for AD4000 series of ADC devices. > > > > Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4000-4004-4008.pdf > > Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4001-4005.pdf > > Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4002-4006-4010.pdf > > Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4003-4007-4011.pdf > > Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4020-4021-4022.pdf > > Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4001.pdf > > Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4003.pdf > > Datasheets URLs are listed in the patch, so probably don't need them > in the commit message too. okay, removed them for v5. > ... > > There are data sheets listed for adaq400x but no compatibles. Ah, that's correct. I missed - const: adi,adaq4001 - const: adi,adaq4003 thanks > ... > > + > > + adi,gain-milli: > > + description: | > > + The hardware gain applied to the ADC input (in milli units). > > + The gain provided by the ADC input scaler is defined by the hardware > > + connections between chip pins OUT+, R1K-, R1K1-, R1K+, R1K1+, and OUT-. > > + If not present, default to 1000 (no actual gain applied). > > + $ref: /schemas/types.yaml#/definitions/uint16 > > Any particular reason why this needs to be uint16 instead of the more > common uint32? The values fit into 16 bits and Nuno asked to make it a 16-bit property. > > > + enum: [454, 909, 1000, 1900] > > + default: 1000 > > + ... > > + # The configuration register can only be accessed in '3-wire' mode > > + - if: > > + not: > > + properties: > > + adi,spi-mode: > > + contains: > > + enum: > > + - single > > adi,spi-mode is not an array and we are only checking for one value, > so this could be simplified to: > > properties: > adi,spi-mode: > const: single > ok, changed to do the check that way. ... > > +examples: > > + - | > > + #include <dt-bindings/gpio/gpio.h> > > + spi { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + /* Example for a AD devices */ > > Comments are a bit redundant since it says "examples:" above and > the type of the chip in the compatible string. > I like the comments. I think it makes clear we have AD and ADAQ devices but ok, removing them for v5. > > + adc@0 { > > + compatible = "adi,ad4020"; > > + reg = <0>; > > + spi-max-frequency = <71000000>; > > + vdd-supply = <&supply_1_8V>; > > + vio-supply = <&supply_1_8V>; > > + ref-supply = <&supply_5V>; > > + cnv-gpios = <&gpio0 88 GPIO_ACTIVE_HIGH>; > > + }; > > + }; > > + - | > > + spi { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + /* Example for a ADAQ devices */ > > + adc@0 { > > + compatible = "adi,adaq4003"; > > + reg = <0>; > > + spi-max-frequency = <80000000>; > > + vdd-supply = <&supply_1_8V>; > > + vio-supply = <&supply_1_8V>; > > + ref-supply = <&supply_5V>; > > + adi,high-z-input; > > + adi,gain-milli = /bits/ 16 <454>; > > + adi,spi-mode = "single"; > > + }; > > + };
On 6/18/24 6:12 PM, Marcelo Schmitt wrote: > Add device tree documentation for AD4000 series of ADC devices. > ... > + adi,spi-mode: > + $ref: /schemas/types.yaml#/definitions/string > + enum: [ single, chain ] > + description: | > + This property indicates the SPI wiring configuration. > + > + When this property is omitted, it is assumed that the device is using what > + the datasheet calls "4-wire mode". This is the conventional SPI mode used > + when there are multiple devices on the same bus. In this mode, the CNV > + line is used to initiate the conversion and the SDI line is connected to > + CS on the SPI controller. > + > + When this property is present, it indicates that the device is using one > + of the following alternative wiring configurations: > + > + * single: The datasheet calls this "3-wire mode". (NOTE: The datasheet's > + definition of 3-wire mode is NOT at all related to the standard > + spi-3wire property!) This mode is often used when the ADC is the only > + device on the bus. In this mode, SDI is connected to MOSI or to VIO, and > + the CNV line can be connected to the CS line of the SPI controller or to > + a GPIO, in which case the CS line of the controller is unused. > + * chain: The datasheet calls this "chain mode". This mode is used to save > + on wiring when multiple ADCs are used. In this mode, the SDI line of > + one chip is tied to the SDO of the next chip in the chain and the SDI of > + the last chip in the chain is tied to GND. Only the first chip in the > + chain is connected to the SPI bus. The CNV line of all chips are tied > + together. The CS line of the SPI controller can be used as the CNV line > + only if it is active high. > + After reviewing the driver and going back and looking at the diagrams in [1] again, I think we are missing a wiring mode here. What the driver is calling "single/3-wire" mode is actually using 4 wires and is the wiring mode that I suggested should be the default since that is the only wiring configuration where we can read/write registers. [1]: https://lore.kernel.org/linux-iio/87058695-a1a6-4e68-87c5-accdb8451bf4@baylibre.com/ So to recap, this is what I suggest we should do: default unnamed mode: * Wiring: ADC HOST --- ---- CNV CS (or GPIO) SDI SDO SDO SDI SCLK SCLK * Requires SPI controller with SPI_MOSI_IDLE_HIGH/LOW capability * Can read/write registers * Can do "3-wire mode"-style reads (turbo and not turbo) * Requires SPI_MOSI_IDLE_HIGH * Can do "4-wire mode"-style reads (turbo and not turbo) * Requires SPI_MOSI_IDLE_HIGH, SPI_CS_HIGH (or no CS and cnv-gpios) * Can do "daisy-chain mode"-style reads * Requires SPI_MOSI_IDLE_LOW, SPI_CS_HIGH (or no CS and cnv-gpios) * #daisy-chained-devices is optional "single" mode: * Wiring: same as default except ADC SDI is hard-wired to logic high. * Cannot read/write registers. * Doesn't require special SPI controller (no SPI_MOSI_IDLE_HIGH/LOW) * Can do "3-wire mode"-style reads (turbo and not turbo) * #daisy-chained-devices is forbidden * Use case: save one wire, works with any SPI controller "multi" mode: * Wiring: ADC HOST --- ---- CNV GPIO SDI CSn SDO SDI SCLK SCLK * Cannot read/write registers. * Doesn't require special SPI controller (no SPI_MOSI_IDLE_HIGH/LOW) * Can do "4-wire mode"-style reads (not turbo) * #daisy-chained-devices is forbidden * Use case: multiple ADCs can share one CNV trigger "chain" mode: * Wiring: same as default except ADC SDI is hard-wired to logic low. * Cannot read/write registers. * Doesn't require special SPI controller (no SPI_MOSI_IDLE_HIGH/LOW) * Can do "daisy-chain mode"-style reads (requires CS high or cnv-gpios) * #daisy-chained-devices is required * Use case: save one wire, works with any SPI controller --- To put it more simply in the bindings though, really this property is just describing how the SDI pin is wired. (CNV pin wiring can be inferred from this property and presence or absence of cnv-gpios property.) So maybe better would be: adi,sdi-pin: $ref: /schemas/types.yaml#/definitions/string enum: [ high, low, cs ] description: Describes how the ADC SDI pin is wired. When this property is omitted, ADC SDI is connected to host SDO. "high" indicates that the ADC SDI pin is hard-wired to logic high (VIO). "low" indicates that it is hard-wired low (GND). "cs" indicates that the ADC SDI pin is connected to the host CS line. And put a note about the specialized SPI controller requirements in the main description.
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml new file mode 100644 index 000000000000..ba50f9e0784b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml @@ -0,0 +1,231 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad4000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD4000 and similar Analog to Digital Converters + +maintainers: + - Marcelo Schmitt <marcelo.schmitt@analog.com> + +description: | + Analog Devices AD4000 family of Analog to Digital Converters with SPI support. + Specifications can be found at: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4000-4004-4008.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4001-4005.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4002-4006-4010.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4003-4007-4011.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4020-4021-4022.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4001.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4003.pdf + +$ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + oneOf: + - const: adi,ad4000 + - items: + - enum: + - adi,ad4004 + - adi,ad4008 + - const: adi,ad4000 + - const: adi,ad4001 + - items: + - enum: + - adi,ad4005 + - const: adi,ad4001 + - const: adi,ad4002 + - items: + - enum: + - adi,ad4006 + - adi,ad4010 + - const: adi,ad4002 + - const: adi,ad4003 + - items: + - enum: + - adi,ad4007 + - adi,ad4011 + - const: adi,ad4003 + - const: adi,ad4020 + - items: + - enum: + - adi,ad4021 + - adi,ad4022 + - const: adi,ad4020 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 102040816 # for VIO > 2.7 V, 81300813 for VIO > 1.7 V + + adi,spi-mode: + $ref: /schemas/types.yaml#/definitions/string + enum: [ single, chain ] + description: | + This property indicates the SPI wiring configuration. + + When this property is omitted, it is assumed that the device is using what + the datasheet calls "4-wire mode". This is the conventional SPI mode used + when there are multiple devices on the same bus. In this mode, the CNV + line is used to initiate the conversion and the SDI line is connected to + CS on the SPI controller. + + When this property is present, it indicates that the device is using one + of the following alternative wiring configurations: + + * single: The datasheet calls this "3-wire mode". (NOTE: The datasheet's + definition of 3-wire mode is NOT at all related to the standard + spi-3wire property!) This mode is often used when the ADC is the only + device on the bus. In this mode, SDI is connected to MOSI or to VIO, and + the CNV line can be connected to the CS line of the SPI controller or to + a GPIO, in which case the CS line of the controller is unused. + * chain: The datasheet calls this "chain mode". This mode is used to save + on wiring when multiple ADCs are used. In this mode, the SDI line of + one chip is tied to the SDO of the next chip in the chain and the SDI of + the last chip in the chain is tied to GND. Only the first chip in the + chain is connected to the SPI bus. The CNV line of all chips are tied + together. The CS line of the SPI controller can be used as the CNV line + only if it is active high. + + '#daisy-chained-devices': true + + vdd-supply: + description: A 1.8V supply that powers the chip (VDD). + + vio-supply: + description: + A 1.8V to 5.5V supply for the digital inputs and outputs (VIO). + + ref-supply: + description: + A 2.5 to 5V supply for the external reference voltage (REF). + + cnv-gpios: + description: + The Convert Input (CNV). This input has multiple functions. It initiates + the conversions and selects the SPI mode of the device (chain or CS). In + 'single' mode, this property is omitted if the CNV pin is connected to the + CS line of the SPI controller. + maxItems: 1 + + adi,high-z-input: + type: boolean + description: + High-Z mode allows the amplifier and RC filter in front of the ADC to be + chosen based on the signal bandwidth of interest, rather than the settling + requirements of the switched capacitor SAR ADC inputs. + + adi,gain-milli: + description: | + The hardware gain applied to the ADC input (in milli units). + The gain provided by the ADC input scaler is defined by the hardware + connections between chip pins OUT+, R1K-, R1K1-, R1K+, R1K1+, and OUT-. + If not present, default to 1000 (no actual gain applied). + $ref: /schemas/types.yaml#/definitions/uint16 + enum: [454, 909, 1000, 1900] + default: 1000 + + interrupts: + description: + The SDO pin can also function as a busy indicator. This node should be + connected to an interrupt that is triggered when the SDO line goes low + while the SDI line is high and the CNV line is low ('single' mode) or the + SDI line is low and the CNV line is high ('multi' mode); or when the SDO + line goes high while the SDI and CNV lines are high (chain mode), + maxItems: 1 + +required: + - compatible + - reg + - vdd-supply + - vio-supply + - ref-supply + +allOf: + # in '4-wire' mode, cnv-gpios is required, for other modes it is optional + - if: + not: + required: + - adi,spi-mode + then: + required: + - cnv-gpios + # The configuration register can only be accessed in '3-wire' mode + - if: + not: + properties: + adi,spi-mode: + contains: + enum: + - single + then: + properties: + adi,high-z-input: false + # chain mode has lower SCLK max rate + - if: + required: + - adi,spi-mode + properties: + adi,spi-mode: + const: chain + then: + properties: + spi-max-frequency: + maximum: 50000000 # for VIO > 2.7 V, 40000000 for VIO > 1.7 V + required: + - '#daisy-chained-devices' + else: + properties: + '#daisy-chained-devices': false + # Gain property only applies to ADAQ devices + - if: + properties: + compatible: + not: + contains: + enum: + - adi,adaq4001 + - adi,adaq4003 + then: + properties: + adi,gain-milli: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + /* Example for a AD devices */ + adc@0 { + compatible = "adi,ad4020"; + reg = <0>; + spi-max-frequency = <71000000>; + vdd-supply = <&supply_1_8V>; + vio-supply = <&supply_1_8V>; + ref-supply = <&supply_5V>; + cnv-gpios = <&gpio0 88 GPIO_ACTIVE_HIGH>; + }; + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + /* Example for a ADAQ devices */ + adc@0 { + compatible = "adi,adaq4003"; + reg = <0>; + spi-max-frequency = <80000000>; + vdd-supply = <&supply_1_8V>; + vio-supply = <&supply_1_8V>; + ref-supply = <&supply_5V>; + adi,high-z-input; + adi,gain-milli = /bits/ 16 <454>; + adi,spi-mode = "single"; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index bff979a507ba..1f052b9cd912 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1200,6 +1200,13 @@ W: https://ez.analog.com/linux-software-drivers F: Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml F: drivers/iio/dac/ad3552r.c +ANALOG DEVICES INC AD4000 DRIVER +M: Marcelo Schmitt <marcelo.schmitt@analog.com> +L: linux-iio@vger.kernel.org +S: Supported +W: https://ez.analog.com/linux-software-drivers +F: Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml + ANALOG DEVICES INC AD4130 DRIVER M: Cosmin Tanislav <cosmin.tanislav@analog.com> L: linux-iio@vger.kernel.org
Add device tree documentation for AD4000 series of ADC devices. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4000-4004-4008.pdf Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4001-4005.pdf Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4002-4006-4010.pdf Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4003-4007-4011.pdf Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4020-4021-4022.pdf Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4001.pdf Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4003.pdf Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> --- .../bindings/iio/adc/adi,ad4000.yaml | 231 ++++++++++++++++++ MAINTAINERS | 7 + 2 files changed, 238 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml