diff mbox series

[1/5] arm64: dts: rockchip: Add common definitions for NanoPi R6C and R6S

Message ID 20240612205056.397204-2-seb-dev@mail.de (mailing list archive)
State New
Headers show
Series Refactor, fix and improve NanoPi R6 series | expand

Commit Message

Sebastian Kropatsch June 12, 2024, 8:48 p.m. UTC
The FriendlyElec NanoPi R6C and R6S are quite similar boards,
although they differ in:
- M.2 M-Key connector vs second RTL8125BG Ethernet port
- One of the LEDs has a different function on each board
- 12-pin GPIO FPC vs 30-pin GPIO header
- R6S has a PWM-based IR receiver while the R6C has not
- R6S has a 5V fan connector while the R6C has not

Refactor their DT files by adding a common definitions file to
improve differentiation clarity between both boards and to make
hardware-specific DT changes easier in the long run.
Do not introduce any functional changes.

Signed-off-by: Sebastian Kropatsch <seb-dev@mail.de>
---
 ...-nanopi-r6s.dts => rk3588s-nanopi-r6.dtsi} |   7 +-
 .../boot/dts/rockchip/rk3588s-nanopi-r6c.dts  |   2 +-
 .../boot/dts/rockchip/rk3588s-nanopi-r6s.dts  | 756 +-----------------
 3 files changed, 7 insertions(+), 758 deletions(-)
 copy arch/arm64/boot/dts/rockchip/{rk3588s-nanopi-r6s.dts => rk3588s-nanopi-r6.dtsi} (99%)

Comments

Heiko Stübner June 20, 2024, 6:34 p.m. UTC | #1
Am Mittwoch, 12. Juni 2024, 22:48:10 CEST schrieb Sebastian Kropatsch:
> The FriendlyElec NanoPi R6C and R6S are quite similar boards,
> although they differ in:
> - M.2 M-Key connector vs second RTL8125BG Ethernet port
> - One of the LEDs has a different function on each board
> - 12-pin GPIO FPC vs 30-pin GPIO header
> - R6S has a PWM-based IR receiver while the R6C has not
> - R6S has a 5V fan connector while the R6C has not
> 
> Refactor their DT files by adding a common definitions file to
> improve differentiation clarity between both boards and to make
> hardware-specific DT changes easier in the long run.
> Do not introduce any functional changes.
> 
> Signed-off-by: Sebastian Kropatsch <seb-dev@mail.de>
> ---
>  ...-nanopi-r6s.dts => rk3588s-nanopi-r6.dtsi} |   7 +-
>  .../boot/dts/rockchip/rk3588s-nanopi-r6c.dts  |   2 +-
>  .../boot/dts/rockchip/rk3588s-nanopi-r6s.dts  | 756 +-----------------
>  3 files changed, 7 insertions(+), 758 deletions(-)
>  copy arch/arm64/boot/dts/rockchip/{rk3588s-nanopi-r6s.dts => rk3588s-nanopi-r6.dtsi} (99%)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
> similarity index 99%
> copy from arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
> copy to arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
> index 4fa644ae510c..e68d4071400e 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
> @@ -1,4 +1,7 @@
>  // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Common devicetree definitions for the NanoPi R6C and R6S
> + */
>  
>  /dts-v1/;
>  
> @@ -8,9 +11,6 @@
>  #include "rk3588s.dtsi"
>  
>  / {
> -	model = "FriendlyElec NanoPi R6S";
> -	compatible = "friendlyarm,nanopi-r6s", "rockchip,rk3588s";
> -
>  	aliases {
>  		ethernet0 = &gmac1;
>  		mmc0 = &sdmmc;
> @@ -74,7 +74,6 @@ lan1_led: led-2 {
>  		};
>  
>  		lan2_led: led-3 {
> -			label = "lan2_led";
>  			gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&lan2_led_pin>;
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
> index 497bbb57071f..ccc5e4627517 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
> @@ -2,7 +2,7 @@
>  
>  /dts-v1/;
>  
> -#include "rk3588s-nanopi-r6s.dts"
> +#include "rk3588s-nanopi-r6.dtsi"
>  
>  / {
>  	model = "FriendlyElec NanoPi R6C";

you didn't add a label for that led here.

Though I think it might very well be much nicer to just define the led
with differing function in each board separately.

Especially as the phandle in the new dtsi now still reference the removed
label.


Heiko
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
similarity index 99%
copy from arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
copy to arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
index 4fa644ae510c..e68d4071400e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
@@ -1,4 +1,7 @@ 
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Common devicetree definitions for the NanoPi R6C and R6S
+ */
 
 /dts-v1/;
 
@@ -8,9 +11,6 @@ 
 #include "rk3588s.dtsi"
 
 / {
-	model = "FriendlyElec NanoPi R6S";
-	compatible = "friendlyarm,nanopi-r6s", "rockchip,rk3588s";
-
 	aliases {
 		ethernet0 = &gmac1;
 		mmc0 = &sdmmc;
@@ -74,7 +74,6 @@  lan1_led: led-2 {
 		};
 
 		lan2_led: led-3 {
-			label = "lan2_led";
 			gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&lan2_led_pin>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
index 497bbb57071f..ccc5e4627517 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
@@ -2,7 +2,7 @@ 
 
 /dts-v1/;
 
-#include "rk3588s-nanopi-r6s.dts"
+#include "rk3588s-nanopi-r6.dtsi"
 
 / {
 	model = "FriendlyElec NanoPi R6C";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
index 4fa644ae510c..9c3e0b0daaac 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
@@ -2,763 +2,13 @@ 
 
 /dts-v1/;
 
-#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "rk3588s.dtsi"
+#include "rk3588s-nanopi-r6.dtsi"
 
 / {
 	model = "FriendlyElec NanoPi R6S";
 	compatible = "friendlyarm,nanopi-r6s", "rockchip,rk3588s";
-
-	aliases {
-		ethernet0 = &gmac1;
-		mmc0 = &sdmmc;
-		mmc1 = &sdhci;
-	};
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 0>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1800000>;
-		poll-interval = <100>;
-
-		button-maskrom {
-			label = "Maskrom";
-			linux,code = <KEY_VENDOR>;
-			press-threshold-microvolt = <1800>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&key1_pin>;
-
-		button-user {
-			label = "User";
-			linux,code = <BTN_1>;
-			gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
-			debounce-interval = <50>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		sys_led: led-0 {
-			label = "sys_led";
-			gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			pinctrl-names = "default";
-			pinctrl-0 = <&sys_led_pin>;
-		};
-
-		wan_led: led-1 {
-			label = "wan_led";
-			gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&wan_led_pin>;
-		};
-
-		lan1_led: led-2 {
-			label = "lan1_led";
-			gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&lan1_led_pin>;
-		};
-
-		lan2_led: led-3 {
-			label = "lan2_led";
-			gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&lan2_led_pin>;
-		};
-	};
-
-	vcc5v0_sys: vcc5v0-sys-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_1v1_nldo_s3";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1100000>;
-		regulator-max-microvolt = <1100000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc_3v3_s0: vcc-3v3-s0-regulator {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-name = "vcc_3v3_s0";
-		vin-supply = <&vcc_3v3_s3>;
-	};
-
-	vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd_s0_pwr>;
-		regulator-name = "vcc_3v3_sd_s0";
-		regulator-boot-on;
-		regulator-max-microvolt = <3000000>;
-		regulator-min-microvolt = <3000000>;
-		vin-supply = <&vcc_3v3_s3>;
-	};
-
-	vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_3v3_pcie20";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_3v3_s3>;
-	};
-
-	vcc5v0_usb: vcc5v0-usb-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_usb";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_usb_otg0: vcc5v0-usb-otg0-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&typec5v_pwren>;
-		regulator-name = "vcc5v0_usb_otg0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc5v0_usb>;
-	};
-
-	vcc5v0_host_20: vcc5v0-host-20-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host20_en>;
-		regulator-name = "vcc5v0_host_20";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc5v0_usb>;
-	};
-};
-
-&combphy0_ps {
-	status = "okay";
-};
-
-&combphy2_psu {
-	status = "okay";
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_big0_s0>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_big0_s0>;
-};
-
-&cpu_b2 {
-	cpu-supply = <&vdd_cpu_big1_s0>;
-};
-
-&cpu_b3 {
-	cpu-supply = <&vdd_cpu_big1_s0>;
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&gmac1 {
-	clock_in_out = "output";
-	phy-handle = <&rgmii_phy1>;
-	phy-mode = "rgmii-rxid";
-	pinctrl-0 = <&gmac1_miim
-		     &gmac1_tx_bus2
-		     &gmac1_rx_bus2
-		     &gmac1_rgmii_clk
-		     &gmac1_rgmii_bus>;
-	pinctrl-names = "default";
-	tx_delay = <0x42>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0m2_xfer>;
-	status = "okay";
-
-	vdd_cpu_big0_s0: regulator@42 {
-		compatible = "rockchip,rk8602";
-		reg = <0x42>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_cpu_big0_s0";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <550000>;
-		regulator-max-microvolt = <1050000>;
-		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_cpu_big1_s0: regulator@43 {
-		compatible = "rockchip,rk8603", "rockchip,rk8602";
-		reg = <0x43>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_cpu_big1_s0";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <550000>;
-		regulator-max-microvolt = <1050000>;
-		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&i2c2 {
-	status = "okay";
-
-	vdd_npu_s0: regulator@42 {
-		compatible = "rockchip,rk8602";
-		reg = <0x42>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_npu_s0";
-		regulator-min-microvolt = <550000>;
-		regulator-max-microvolt = <950000>;
-		regulator-ramp-delay = <2300>;
-		regulator-boot-on;
-		regulator-always-on;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&i2c6 {
-	clock-frequency = <200000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c6m0_xfer>;
-	status = "okay";
-
-	hym8563: rtc@51 {
-		compatible = "haoyu,hym8563";
-		reg = <0x51>;
-		#clock-cells = <0>;
-		clock-output-names = "hym8563";
-		pinctrl-names = "default";
-		pinctrl-0 = <&rtc_int>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
-		wakeup-source;
-	};
-};
-
-&mdio1 {
-	rgmii_phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-id001c.c916";
-		reg = <0x1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&rtl8211f_rst>;
-		reset-assert-us = <20000>;
-		reset-deassert-us = <100000>;
-		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&pcie2x1l1 {
-	reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
-	vpcie3v3-supply = <&vcc_3v3_pcie20>;
-	status = "okay";
-};
-
-&pcie2x1l2 {
-	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
-	vpcie3v3-supply = <&vcc_3v3_pcie20>;
-	status = "okay";
-};
-
-&pinctrl {
-	gpio-key {
-		key1_pin: key1-pin {
-			rockchip,pins = <1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	gpio-leds {
-		sys_led_pin: sys-led-pin {
-			rockchip,pins =
-				<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		wan_led_pin: wan-led-pin {
-			rockchip,pins =
-				<1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		lan1_led_pin: lan1-led-pin {
-			rockchip,pins =
-				<1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		lan2_led_pin: lan2-led-pin {
-			rockchip,pins =
-				<1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	hym8563 {
-		rtc_int: rtc-int {
-			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	sdmmc {
-		sd_s0_pwr: sd-s0-pwr {
-			rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	usb {
-		typec5v_pwren: typec5v-pwren {
-			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		vcc5v0_host20_en: vcc5v0-host20-en {
-			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	rtl8211f {
-		rtl8211f_rst: rtl8211f-rst {
-			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&saradc {
-	vref-supply = <&avcc_1v8_s0>;
-	status = "okay";
-};
-
-&sdhci {
-	bus-width = <8>;
-	no-sdio;
-	no-sd;
-	non-removable;
-	mmc-hs200-1_8v;
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	disable-wp;
-	max-frequency = <150000000>;
-	no-mmc;
-	no-sdio;
-	sd-uhs-sdr104;
-	vmmc-supply = <&vcc_3v3_sd_s0>;
-	vqmmc-supply = <&vccio_sd_s0>;
-	status = "okay";
-};
-
-&spi2 {
-	status = "okay";
-	assigned-clocks = <&cru CLK_SPI2>;
-	assigned-clock-rates = <200000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
-	num-cs = <1>;
-
-	pmic@0 {
-		compatible = "rockchip,rk806";
-		spi-max-frequency = <1000000>;
-		reg = <0x0>;
-
-		interrupt-parent = <&gpio0>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
-			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
-
-		system-power-controller;
-
-		vcc1-supply = <&vcc5v0_sys>;
-		vcc2-supply = <&vcc5v0_sys>;
-		vcc3-supply = <&vcc5v0_sys>;
-		vcc4-supply = <&vcc5v0_sys>;
-		vcc5-supply = <&vcc5v0_sys>;
-		vcc6-supply = <&vcc5v0_sys>;
-		vcc7-supply = <&vcc5v0_sys>;
-		vcc8-supply = <&vcc5v0_sys>;
-		vcc9-supply = <&vcc5v0_sys>;
-		vcc10-supply = <&vcc5v0_sys>;
-		vcc11-supply = <&vcc_2v0_pldo_s3>;
-		vcc12-supply = <&vcc5v0_sys>;
-		vcc13-supply = <&vcc_1v1_nldo_s3>;
-		vcc14-supply = <&vcc_1v1_nldo_s3>;
-		vcca-supply = <&vcc5v0_sys>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl1";
-			function = "pin_fun0";
-		};
-
-		rk806_dvs2_null: dvs2-null-pins {
-			pins = "gpio_pwrctrl2";
-			function = "pin_fun0";
-		};
-
-		rk806_dvs3_null: dvs3-null-pins {
-			pins = "gpio_pwrctrl3";
-			function = "pin_fun0";
-		};
-
-		regulators {
-			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
-				regulator-boot-on;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <950000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vdd_gpu_s0";
-				regulator-enable-ramp-delay = <400>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <950000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vdd_cpu_lit_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_log_s0: dcdc-reg3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <675000>;
-				regulator-max-microvolt = <750000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vdd_log_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <750000>;
-				};
-			};
-
-			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <950000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vdd_vdenc_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_ddr_s0: dcdc-reg5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <675000>;
-				regulator-max-microvolt = <900000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vdd_ddr_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <850000>;
-				};
-			};
-
-			vdd2_ddr_s3: dcdc-reg6 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vdd2_ddr_s3";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_2v0_pldo_s3: dcdc-reg7 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vdd_2v0_pldo_s3";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <2000000>;
-				};
-			};
-
-			vcc_3v3_s3: dcdc-reg8 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_3v3_s3";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vddq_ddr_s0: dcdc-reg9 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vddq_ddr_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v8_s3: dcdc-reg10 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_1v8_s3";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			avcc_1v8_s0: pldo-reg1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "avcc_1v8_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_1v8_s0: pldo-reg2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_1v8_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			avdd_1v2_s0: pldo-reg3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-name = "avdd_1v2_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			avcc_3v3_s0: pldo-reg4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "avcc_3v3_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vccio_sd_s0: pldo-reg5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vccio_sd_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			pldo6_s3: pldo-reg6 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "pldo6_s3";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vdd_0v75_s3: nldo-reg1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-				regulator-name = "vdd_0v75_s3";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <750000>;
-				};
-			};
-
-			avdd_ddr_pll_s0: nldo-reg2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <850000>;
-				regulator-name = "avdd_ddr_pll_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <850000>;
-				};
-			};
-
-			avdd_0v75_s0: nldo-reg3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-				regulator-name = "avdd_0v75_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			avdd_0v85_s0: nldo-reg4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <850000>;
-				regulator-name = "avdd_0v85_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_0v75_s0: nldo-reg5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-				regulator-name = "vdd_0v75_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-};
-
-&tsadc {
-	status = "okay";
-};
-
-&u2phy2 {
-	status = "okay";
-};
-
-&u2phy2_host {
-	phy-supply = <&vcc5v0_host_20>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-0 = <&uart2m0_xfer>;
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
 };
 
-&usb_host0_ohci {
-	status = "okay";
+&lan2_led {
+	label = "lan2_led";
 };