| Message ID | 20240611073904.475019-3-arnaud.pouliquen@foss.st.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Introduction of a remoteproc tee to load signed firmware | expand |
Hi, On Tue, Jun 11, 2024 at 09:39:01AM +0200, Arnaud Pouliquen wrote: > Add a remoteproc TEE (Trusted Execution Environment) driver > that will be probed by the TEE bus. If the associated Trusted > application is supported on secure part this driver offers a client > interface to load a firmware in the secure part. > This firmware could be authenticated by the secure trusted application. > > Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> > --- > update from V > - Fix missing "{" in tee_rproc_find_loaded_rsc_table inline definition. > > update from V5 > - make tee_rproc_get_loaded_rsc_table() local and replace this API by > tee_rproc_find_loaded_rsc_table() > - map and unmap the resource table in tee_rproc_parse_fw to make a cached copy > - use the new rproc_pa_to_va() API to map the resource table memory declared in carevout > - remove tee_rproc_release_loaded_rsc_table as no more used. > --- > drivers/remoteproc/Kconfig | 10 + > drivers/remoteproc/Makefile | 1 + > drivers/remoteproc/tee_remoteproc.c | 451 ++++++++++++++++++++++++++++ > include/linux/remoteproc.h | 4 + > include/linux/tee_remoteproc.h | 100 ++++++ > 5 files changed, 566 insertions(+) > create mode 100644 drivers/remoteproc/tee_remoteproc.c > create mode 100644 include/linux/tee_remoteproc.h > > diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig > index 48845dc8fa85..6c1c07202276 100644 > --- a/drivers/remoteproc/Kconfig > +++ b/drivers/remoteproc/Kconfig > @@ -365,6 +365,16 @@ config XLNX_R5_REMOTEPROC > > It's safe to say N if not interested in using RPU r5f cores. > > + > +config TEE_REMOTEPROC > + tristate "Remoteproc support by a TEE application" > + depends on OPTEE > + help > + Support a remote processor with a TEE application. The Trusted > + Execution Context is responsible for loading the trusted firmware > + image and managing the remote processor's lifecycle. > + This can be either built-in or a loadable module. > + > endif # REMOTEPROC > > endmenu > diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile > index 91314a9b43ce..fa8daebce277 100644 > --- a/drivers/remoteproc/Makefile > +++ b/drivers/remoteproc/Makefile > @@ -36,6 +36,7 @@ obj-$(CONFIG_RCAR_REMOTEPROC) += rcar_rproc.o > obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o > obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o > obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o > +obj-$(CONFIG_TEE_REMOTEPROC) += tee_remoteproc.o > obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o > obj-$(CONFIG_TI_K3_R5_REMOTEPROC) += ti_k3_r5_remoteproc.o > obj-$(CONFIG_XLNX_R5_REMOTEPROC) += xlnx_r5_remoteproc.o > diff --git a/drivers/remoteproc/tee_remoteproc.c b/drivers/remoteproc/tee_remoteproc.c > new file mode 100644 > index 000000000000..9455fd9d0d2d > --- /dev/null > +++ b/drivers/remoteproc/tee_remoteproc.c > @@ -0,0 +1,451 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * Copyright (C) STMicroelectronics 2024 - All Rights Reserved > + * Author: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> > + */ > + > +#include <linux/firmware.h> > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/remoteproc.h> > +#include <linux/slab.h> > +#include <linux/tee_drv.h> > +#include <linux/tee_remoteproc.h> > + > +#include "remoteproc_internal.h" > + > +#define MAX_TEE_PARAM_ARRY_MEMBER 4 > + > +/* > + * Authentication of the firmware and load in the remote processor memory > + * > + * [in] params[0].value.a: unique 32bit identifier of the remote processor > + * [in] params[1].memref: buffer containing the image of the buffer > + */ > +#define TA_RPROC_FW_CMD_LOAD_FW 1 > + > +/* > + * Start the remote processor > + * > + * [in] params[0].value.a: unique 32bit identifier of the remote processor > + */ > +#define TA_RPROC_FW_CMD_START_FW 2 > + > +/* > + * Stop the remote processor > + * > + * [in] params[0].value.a: unique 32bit identifier of the remote processor > + */ > +#define TA_RPROC_FW_CMD_STOP_FW 3 > + > +/* > + * Return the address of the resource table, or 0 if not found > + * No check is done to verify that the address returned is accessible by > + * the non secure context. If the resource table is loaded in a protected > + * memory the access by the non secure context will lead to a data abort. > + * > + * [in] params[0].value.a: unique 32bit identifier of the remote processor > + * [out] params[1].value.a: 32bit LSB resource table memory address > + * [out] params[1].value.b: 32bit MSB resource table memory address > + * [out] params[2].value.a: 32bit LSB resource table memory size > + * [out] params[2].value.b: 32bit MSB resource table memory size > + */ > +#define TA_RPROC_FW_CMD_GET_RSC_TABLE 4 > + > +/* > + * Return the address of the core dump > + * > + * [in] params[0].value.a: unique 32bit identifier of the remote processor > + * [out] params[1].memref: address of the core dump image if exist, > + * else return Null > + */ > +#define TA_RPROC_FW_CMD_GET_COREDUMP 5 > + > +struct tee_rproc_context { > + struct list_head sessions; > + struct tee_context *tee_ctx; > + struct device *dev; > +}; > + > +static struct tee_rproc_context *tee_rproc_ctx; > + > +static void tee_rproc_prepare_args(struct tee_rproc *trproc, int cmd, > + struct tee_ioctl_invoke_arg *arg, > + struct tee_param *param, > + unsigned int num_params) > +{ > + memset(arg, 0, sizeof(*arg)); > + memset(param, 0, MAX_TEE_PARAM_ARRY_MEMBER * sizeof(*param)); > + > + arg->func = cmd; > + arg->session = trproc->session_id; > + arg->num_params = num_params + 1; > + > + param[0] = (struct tee_param) { > + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, > + .u.value.a = trproc->rproc_id, > + }; > +} > + > +int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw) > +{ > + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > + struct tee_rproc *trproc = rproc->tee_interface; > + struct tee_ioctl_invoke_arg arg; > + struct tee_shm *fw_shm; > + int ret; > + > + if (!trproc) > + return -EINVAL; > + > + fw_shm = tee_shm_register_kernel_buf(tee_rproc_ctx->tee_ctx, (void *)fw->data, fw->size); > + if (IS_ERR(fw_shm)) > + return PTR_ERR(fw_shm); > + > + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_LOAD_FW, &arg, param, 1); > + > + /* Provide the address of the firmware image */ > + param[1] = (struct tee_param) { > + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT, > + .u.memref = { > + .shm = fw_shm, > + .size = fw->size, > + .shm_offs = 0, > + }, > + }; > + > + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); > + if (ret < 0 || arg.ret != 0) { > + dev_err(tee_rproc_ctx->dev, > + "TA_RPROC_FW_CMD_LOAD_FW invoke failed TEE err: %x, ret:%x\n", > + arg.ret, ret); > + if (!ret) > + ret = -EIO; > + } > + > + tee_shm_free(fw_shm); > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(tee_rproc_load_fw); > + > +static int tee_rproc_get_loaded_rsc_table(struct rproc *rproc, phys_addr_t *rsc_pa, > + size_t *table_sz) > +{ > + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > + struct tee_rproc *trproc = rproc->tee_interface; > + struct tee_ioctl_invoke_arg arg; > + int ret; > + > + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_GET_RSC_TABLE, &arg, param, 2); > + > + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT; > + param[2].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT; > + > + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); > + if (ret < 0 || arg.ret != 0) { > + dev_err(tee_rproc_ctx->dev, > + "TA_RPROC_FW_CMD_GET_RSC_TABLE invoke failed TEE err: %x, ret:%x\n", > + arg.ret, ret); > + return -EIO; > + } > + > + *table_sz = param[2].u.value.a; > + > + if (*table_sz) > + *rsc_pa = param[1].u.value.a; > + else > + *rsc_pa = 0; > + > + return 0; > +} > + > +int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) > +{ > + phys_addr_t rsc_table; > + void __iomem *rsc_va; > + size_t table_sz; > + int ret; > + > + ret = tee_rproc_load_fw(rproc, fw); > + if (ret) > + return ret; > + > + ret = tee_rproc_get_loaded_rsc_table(rproc, &rsc_table, &table_sz); > + if (ret) > + return ret; > + > + /* > + * We assume here that the memory mapping is the same between the TEE and Linux kernel > + * contexts. Else a new TEE remoteproc service could be needed to get a copy of the > + * resource table > + */ > + rsc_va = ioremap_wc(rsc_table, table_sz); > + if (IS_ERR_OR_NULL(rsc_va)) { > + dev_err(tee_rproc_ctx->dev, "Unable to map memory region: %pa+%zx\n", > + &rsc_table, table_sz); > + return -ENOMEM; > + } > + > + /* > + * Create a copy of the resource table to have the same behavior as the elf loader. > + * This cached table will be used after the remoteproc stops to free resources, and for > + * crash recovery to reapply the settings. > + */ > + rproc->cached_table = kmemdup((__force void *)rsc_va, table_sz, GFP_KERNEL); > + if (!rproc->cached_table) { > + ret = -ENOMEM; > + goto out; > + } > + > + rproc->table_ptr = rproc->cached_table; > + rproc->table_sz = table_sz; > + > +out: > + iounmap(rsc_va); > + return ret; > +} > +EXPORT_SYMBOL_GPL(tee_rproc_parse_fw); > + > +struct resource_table *tee_rproc_find_loaded_rsc_table(struct rproc *rproc, > + const struct firmware *fw) > +{ > + struct tee_rproc *trproc = rproc->tee_interface; > + phys_addr_t rsc_table; > + size_t table_sz; > + int ret; > + > + if (!trproc) > + return ERR_PTR(-EINVAL); > + > + ret = tee_rproc_get_loaded_rsc_table(rproc, &rsc_table, &table_sz); > + if (ret) > + return ERR_PTR(ret); > + > + rproc->table_sz = table_sz; > + if (!table_sz) > + return NULL; > + > + /* > + * At this step the memory area that contains the resource table should have be declared > + * in the remote proc platform driver and allocated by rproc_alloc_registered_carveouts(). > + */ > + > + return (struct resource_table *)rproc_pa_to_va(rproc, rsc_table, table_sz, NULL); > +} > +EXPORT_SYMBOL_GPL(tee_rproc_find_loaded_rsc_table); > + > +int tee_rproc_start(struct rproc *rproc) > +{ > + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > + struct tee_rproc *trproc = rproc->tee_interface; > + struct tee_ioctl_invoke_arg arg; > + int ret = 0; > + > + if (!trproc) > + return -EINVAL; > + > + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_START_FW, &arg, param, 0); > + > + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); > + if (ret < 0 || arg.ret != 0) { > + dev_err(tee_rproc_ctx->dev, > + "TA_RPROC_FW_CMD_START_FW invoke failed TEE err: %x, ret:%x\n", > + arg.ret, ret); > + if (!ret) > + return -EIO; > + } > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(tee_rproc_start); > + > +int tee_rproc_stop(struct rproc *rproc) > +{ > + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > + struct tee_rproc *trproc = rproc->tee_interface; > + struct tee_ioctl_invoke_arg arg; > + int ret; > + > + if (!trproc) > + return -EINVAL; > + > + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_STOP_FW, &arg, param, 0); > + > + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); > + if (ret < 0 || arg.ret != 0) { > + dev_err(tee_rproc_ctx->dev, > + "TA_RPROC_FW_CMD_STOP_FW invoke failed TEE err: %x, ret:%x\n", > + arg.ret, ret); > + if (!ret) > + ret = -EIO; > + } > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(tee_rproc_stop); > + > +static const struct tee_client_device_id stm32_tee_rproc_id_table[] = { > + {UUID_INIT(0x80a4c275, 0x0a47, 0x4905, > + 0x82, 0x85, 0x14, 0x86, 0xa9, 0x77, 0x1a, 0x08)}, > + {} > +}; > + > +struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc, unsigned int rproc_id) > +{ > + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > + struct tee_ioctl_open_session_arg sess_arg; > + struct tee_client_device *tee_device; > + struct tee_rproc *trproc, *p_err; > + int ret; > + > + /* > + * Test if the device has been probed by the TEE bus. In case of failure, we ignore the > + * reason. The bus could be not yet probed or the service not available in the secure > + * firmware.The assumption in such a case is that the TEE remoteproc is not probed. > + */ > + if (!tee_rproc_ctx) > + return ERR_PTR(-EPROBE_DEFER); > + > + /* Prevent tee rproc module from being removed */ > + if (!try_module_get(THIS_MODULE)) { > + dev_err(tee_rproc_ctx->dev, "can't get owner\n"); > + p_err = ERR_PTR(-ENODEV); > + goto module_put; > + } > + > + trproc = devm_kzalloc(dev, sizeof(*trproc), GFP_KERNEL); > + if (!trproc) { > + p_err = ERR_PTR(-ENOMEM); > + goto module_put; > + } > + tee_device = to_tee_client_device(tee_rproc_ctx->dev); > + memset(&sess_arg, 0, sizeof(sess_arg)); > + > + memcpy(sess_arg.uuid, tee_device->id.uuid.b, TEE_IOCTL_UUID_LEN); > + > + sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL; > + sess_arg.num_params = 1; > + > + param[0] = (struct tee_param) { > + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, > + .u.value.a = rproc_id, > + }; > + > + ret = tee_client_open_session(tee_rproc_ctx->tee_ctx, &sess_arg, param); > + if (ret < 0 || sess_arg.ret != 0) { > + dev_err(dev, "tee_client_open_session failed, err: %x\n", sess_arg.ret); > + p_err = ERR_PTR(-EINVAL); > + goto module_put; > + } > + > + trproc->parent = dev; > + trproc->rproc_id = rproc_id; > + trproc->session_id = sess_arg.session; > + > + trproc->rproc = rproc; > + rproc->tee_interface = trproc; > + > + list_add_tail(&trproc->node, &tee_rproc_ctx->sessions); > + > + return trproc; > + > +module_put: > + module_put(THIS_MODULE); > + return p_err; > +} > +EXPORT_SYMBOL_GPL(tee_rproc_register); > + > +int tee_rproc_unregister(struct tee_rproc *trproc) > +{ > + struct rproc *rproc = trproc->rproc; > + int ret; > + > + ret = tee_client_close_session(tee_rproc_ctx->tee_ctx, trproc->session_id); > + if (ret < 0) > + dev_err(trproc->parent, "tee_client_close_session failed, err: %x\n", ret); > + > + list_del(&trproc->node); > + rproc->tee_interface = NULL; > + > + module_put(THIS_MODULE); > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(tee_rproc_unregister); > + > +static int tee_rproc_ctx_match(struct tee_ioctl_version_data *ver, const void *data) > +{ > + /* Today we support only the OP-TEE, could be extend to other tees */ > + return (ver->impl_id == TEE_IMPL_ID_OPTEE); > +} > + > +static int tee_rproc_probe(struct device *dev) > +{ > + struct tee_context *tee_ctx; > + int ret; > + > + /* Open context with TEE driver */ > + tee_ctx = tee_client_open_context(NULL, tee_rproc_ctx_match, NULL, NULL); > + if (IS_ERR(tee_ctx)) > + return PTR_ERR(tee_ctx); > + > + tee_rproc_ctx = devm_kzalloc(dev, sizeof(*tee_ctx), GFP_KERNEL); I started reviewing this set - aside from the above allocation that isn't right, I am definitely not sure about ops::pa_to_va(). There is a patchset from TI on the mailing list [1] that also needs to translate addresses only accessible to the remote processor and they simply enhanced their ops::da_to_va(). Perhaps I'll find an answer as I continue to review this set... [1]. [PATCH v10 0/8] TI K3 M4F support on AM62 and AM64 SoCs > + if (!tee_rproc_ctx) { > + ret = -ENOMEM; > + goto err; > + } > + > + tee_rproc_ctx->dev = dev; > + tee_rproc_ctx->tee_ctx = tee_ctx; > + INIT_LIST_HEAD(&tee_rproc_ctx->sessions); > + > + return 0; > +err: > + tee_client_close_context(tee_ctx); > + > + return ret; > +} > + > +static int tee_rproc_remove(struct device *dev) > +{ > + struct tee_rproc *entry, *tmp; > + > + list_for_each_entry_safe(entry, tmp, &tee_rproc_ctx->sessions, node) { > + tee_client_close_session(tee_rproc_ctx->tee_ctx, entry->session_id); > + list_del(&entry->node); > + kfree(entry); > + } > + > + tee_client_close_context(tee_rproc_ctx->tee_ctx); > + > + return 0; > +} > + > +MODULE_DEVICE_TABLE(tee, stm32_tee_rproc_id_table); > + > +static struct tee_client_driver tee_rproc_fw_driver = { > + .id_table = stm32_tee_rproc_id_table, > + .driver = { > + .name = KBUILD_MODNAME, > + .bus = &tee_bus_type, > + .probe = tee_rproc_probe, > + .remove = tee_rproc_remove, > + }, > +}; > + > +static int __init tee_rproc_fw_mod_init(void) > +{ > + return driver_register(&tee_rproc_fw_driver.driver); > +} > + > +static void __exit tee_rproc_fw_mod_exit(void) > +{ > + driver_unregister(&tee_rproc_fw_driver.driver); > +} > + > +module_init(tee_rproc_fw_mod_init); > +module_exit(tee_rproc_fw_mod_exit); > + > +MODULE_DESCRIPTION(" TEE remote processor control driver"); > +MODULE_LICENSE("GPL"); > diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h > index 28aa62a3b505..6168f778414f 100644 > --- a/include/linux/remoteproc.h > +++ b/include/linux/remoteproc.h > @@ -505,6 +505,8 @@ enum rproc_features { > RPROC_MAX_FEATURES, > }; > > +struct tee_rproc; > + > /** > * struct rproc - represents a physical remote processor device > * @node: list node of this rproc object > @@ -547,6 +549,7 @@ enum rproc_features { > * @cdev: character device of the rproc > * @cdev_put_on_release: flag to indicate if remoteproc should be shutdown on @char_dev release > * @features: indicate remoteproc features > + * @tee_interface: pointer to the remoteproc tee context > */ > struct rproc { > struct list_head node; > @@ -588,6 +591,7 @@ struct rproc { > struct cdev cdev; > bool cdev_put_on_release; > DECLARE_BITMAP(features, RPROC_MAX_FEATURES); > + struct tee_rproc *tee_interface; > }; > > /** > diff --git a/include/linux/tee_remoteproc.h b/include/linux/tee_remoteproc.h > new file mode 100644 > index 000000000000..c9ae4f60e844 > --- /dev/null > +++ b/include/linux/tee_remoteproc.h > @@ -0,0 +1,100 @@ > +/* SPDX-License-Identifier: GPL-2.0-or-later */ > +/* > + * Copyright(c) 2024 STMicroelectronics - All Rights Reserved > + */ > + > +#ifndef TEE_REMOTEPROC_H > +#define TEE_REMOTEPROC_H > + > +#include <linux/tee_drv.h> > +#include <linux/firmware.h> > +#include <linux/remoteproc.h> > + > +struct rproc; > + > +/** > + * struct tee_rproc - TEE remoteproc structure > + * @node: Reference in list > + * @rproc: Remoteproc reference > + * @parent: Parent device > + * @rproc_id: Identifier of the target firmware > + * @session_id: TEE session identifier > + */ > +struct tee_rproc { > + struct list_head node; > + struct rproc *rproc; > + struct device *parent; > + u32 rproc_id; > + u32 session_id; > +}; > + > +#if IS_REACHABLE(CONFIG_TEE_REMOTEPROC) > + > +struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc, > + unsigned int rproc_id); > +int tee_rproc_unregister(struct tee_rproc *trproc); > +int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw); > +int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw); > +struct resource_table *tee_rproc_find_loaded_rsc_table(struct rproc *rproc, > + const struct firmware *fw); > +int tee_rproc_start(struct rproc *rproc); > +int tee_rproc_stop(struct rproc *rproc); > + > +#else > + > +static inline struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc, > + unsigned int rproc_id) > +{ > + return ERR_PTR(-ENODEV); > +} > + > +static int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) > +{ > + /* This shouldn't be possible */ > + WARN_ON(1); > + > + return 0; > +} > + > +static inline int tee_rproc_unregister(struct tee_rproc *trproc) > +{ > + /* This shouldn't be possible */ > + WARN_ON(1); > + > + return 0; > +} > + > +static inline int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw) > +{ > + /* This shouldn't be possible */ > + WARN_ON(1); > + > + return 0; > +} > + > +static inline int tee_rproc_start(struct rproc *rproc) > +{ > + /* This shouldn't be possible */ > + WARN_ON(1); > + > + return 0; > +} > + > +static inline int tee_rproc_stop(struct rproc *rproc) > +{ > + /* This shouldn't be possible */ > + WARN_ON(1); > + > + return 0; > +} > + > +static inline struct resource_table * > +tee_rproc_find_loaded_rsc_table(struct rproc *rproc, const struct firmware *fw) > +{ > + /* This shouldn't be possible */ > + WARN_ON(1); > + > + return NULL; > +} > +#endif /* CONFIG_TEE_REMOTEPROC */ > +#endif /* TEE_REMOTEPROC_H */ > -- > 2.25.1 >
Hi, On 6/19/24 17:41, Mathieu Poirier wrote: > Hi, > > On Tue, Jun 11, 2024 at 09:39:01AM +0200, Arnaud Pouliquen wrote: >> Add a remoteproc TEE (Trusted Execution Environment) driver >> that will be probed by the TEE bus. If the associated Trusted >> application is supported on secure part this driver offers a client >> interface to load a firmware in the secure part. >> This firmware could be authenticated by the secure trusted application. >> >> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> >> --- >> update from V >> - Fix missing "{" in tee_rproc_find_loaded_rsc_table inline definition. >> >> update from V5 >> - make tee_rproc_get_loaded_rsc_table() local and replace this API by >> tee_rproc_find_loaded_rsc_table() >> - map and unmap the resource table in tee_rproc_parse_fw to make a cached copy >> - use the new rproc_pa_to_va() API to map the resource table memory declared in carevout >> - remove tee_rproc_release_loaded_rsc_table as no more used. >> --- >> drivers/remoteproc/Kconfig | 10 + >> drivers/remoteproc/Makefile | 1 + >> drivers/remoteproc/tee_remoteproc.c | 451 ++++++++++++++++++++++++++++ >> include/linux/remoteproc.h | 4 + >> include/linux/tee_remoteproc.h | 100 ++++++ >> 5 files changed, 566 insertions(+) >> create mode 100644 drivers/remoteproc/tee_remoteproc.c >> create mode 100644 include/linux/tee_remoteproc.h >> >> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig >> index 48845dc8fa85..6c1c07202276 100644 >> --- a/drivers/remoteproc/Kconfig >> +++ b/drivers/remoteproc/Kconfig >> @@ -365,6 +365,16 @@ config XLNX_R5_REMOTEPROC >> >> It's safe to say N if not interested in using RPU r5f cores. >> >> + >> +config TEE_REMOTEPROC >> + tristate "Remoteproc support by a TEE application" >> + depends on OPTEE >> + help >> + Support a remote processor with a TEE application. The Trusted >> + Execution Context is responsible for loading the trusted firmware >> + image and managing the remote processor's lifecycle. >> + This can be either built-in or a loadable module. >> + >> endif # REMOTEPROC >> >> endmenu >> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile >> index 91314a9b43ce..fa8daebce277 100644 >> --- a/drivers/remoteproc/Makefile >> +++ b/drivers/remoteproc/Makefile >> @@ -36,6 +36,7 @@ obj-$(CONFIG_RCAR_REMOTEPROC) += rcar_rproc.o >> obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o >> obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o >> obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o >> +obj-$(CONFIG_TEE_REMOTEPROC) += tee_remoteproc.o >> obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o >> obj-$(CONFIG_TI_K3_R5_REMOTEPROC) += ti_k3_r5_remoteproc.o >> obj-$(CONFIG_XLNX_R5_REMOTEPROC) += xlnx_r5_remoteproc.o >> diff --git a/drivers/remoteproc/tee_remoteproc.c b/drivers/remoteproc/tee_remoteproc.c >> new file mode 100644 >> index 000000000000..9455fd9d0d2d >> --- /dev/null >> +++ b/drivers/remoteproc/tee_remoteproc.c >> @@ -0,0 +1,451 @@ >> +// SPDX-License-Identifier: GPL-2.0-or-later >> +/* >> + * Copyright (C) STMicroelectronics 2024 - All Rights Reserved >> + * Author: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> >> + */ >> + >> +#include <linux/firmware.h> >> +#include <linux/io.h> >> +#include <linux/module.h> >> +#include <linux/remoteproc.h> >> +#include <linux/slab.h> >> +#include <linux/tee_drv.h> >> +#include <linux/tee_remoteproc.h> >> + >> +#include "remoteproc_internal.h" >> + >> +#define MAX_TEE_PARAM_ARRY_MEMBER 4 >> + >> +/* >> + * Authentication of the firmware and load in the remote processor memory >> + * >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor >> + * [in] params[1].memref: buffer containing the image of the buffer >> + */ >> +#define TA_RPROC_FW_CMD_LOAD_FW 1 >> + >> +/* >> + * Start the remote processor >> + * >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor >> + */ >> +#define TA_RPROC_FW_CMD_START_FW 2 >> + >> +/* >> + * Stop the remote processor >> + * >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor >> + */ >> +#define TA_RPROC_FW_CMD_STOP_FW 3 >> + >> +/* >> + * Return the address of the resource table, or 0 if not found >> + * No check is done to verify that the address returned is accessible by >> + * the non secure context. If the resource table is loaded in a protected >> + * memory the access by the non secure context will lead to a data abort. >> + * >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor >> + * [out] params[1].value.a: 32bit LSB resource table memory address >> + * [out] params[1].value.b: 32bit MSB resource table memory address >> + * [out] params[2].value.a: 32bit LSB resource table memory size >> + * [out] params[2].value.b: 32bit MSB resource table memory size >> + */ >> +#define TA_RPROC_FW_CMD_GET_RSC_TABLE 4 >> + >> +/* >> + * Return the address of the core dump >> + * >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor >> + * [out] params[1].memref: address of the core dump image if exist, >> + * else return Null >> + */ >> +#define TA_RPROC_FW_CMD_GET_COREDUMP 5 >> + >> +struct tee_rproc_context { >> + struct list_head sessions; >> + struct tee_context *tee_ctx; >> + struct device *dev; >> +}; >> + >> +static struct tee_rproc_context *tee_rproc_ctx; >> + >> +static void tee_rproc_prepare_args(struct tee_rproc *trproc, int cmd, >> + struct tee_ioctl_invoke_arg *arg, >> + struct tee_param *param, >> + unsigned int num_params) >> +{ >> + memset(arg, 0, sizeof(*arg)); >> + memset(param, 0, MAX_TEE_PARAM_ARRY_MEMBER * sizeof(*param)); >> + >> + arg->func = cmd; >> + arg->session = trproc->session_id; >> + arg->num_params = num_params + 1; >> + >> + param[0] = (struct tee_param) { >> + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, >> + .u.value.a = trproc->rproc_id, >> + }; >> +} >> + >> +int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw) >> +{ >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; >> + struct tee_rproc *trproc = rproc->tee_interface; >> + struct tee_ioctl_invoke_arg arg; >> + struct tee_shm *fw_shm; >> + int ret; >> + >> + if (!trproc) >> + return -EINVAL; >> + >> + fw_shm = tee_shm_register_kernel_buf(tee_rproc_ctx->tee_ctx, (void *)fw->data, fw->size); >> + if (IS_ERR(fw_shm)) >> + return PTR_ERR(fw_shm); >> + >> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_LOAD_FW, &arg, param, 1); >> + >> + /* Provide the address of the firmware image */ >> + param[1] = (struct tee_param) { >> + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT, >> + .u.memref = { >> + .shm = fw_shm, >> + .size = fw->size, >> + .shm_offs = 0, >> + }, >> + }; >> + >> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); >> + if (ret < 0 || arg.ret != 0) { >> + dev_err(tee_rproc_ctx->dev, >> + "TA_RPROC_FW_CMD_LOAD_FW invoke failed TEE err: %x, ret:%x\n", >> + arg.ret, ret); >> + if (!ret) >> + ret = -EIO; >> + } >> + >> + tee_shm_free(fw_shm); >> + >> + return ret; >> +} >> +EXPORT_SYMBOL_GPL(tee_rproc_load_fw); >> + >> +static int tee_rproc_get_loaded_rsc_table(struct rproc *rproc, phys_addr_t *rsc_pa, >> + size_t *table_sz) >> +{ >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; >> + struct tee_rproc *trproc = rproc->tee_interface; >> + struct tee_ioctl_invoke_arg arg; >> + int ret; >> + >> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_GET_RSC_TABLE, &arg, param, 2); >> + >> + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT; >> + param[2].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT; >> + >> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); >> + if (ret < 0 || arg.ret != 0) { >> + dev_err(tee_rproc_ctx->dev, >> + "TA_RPROC_FW_CMD_GET_RSC_TABLE invoke failed TEE err: %x, ret:%x\n", >> + arg.ret, ret); >> + return -EIO; >> + } >> + >> + *table_sz = param[2].u.value.a; >> + >> + if (*table_sz) >> + *rsc_pa = param[1].u.value.a; >> + else >> + *rsc_pa = 0; >> + >> + return 0; >> +} >> + >> +int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) >> +{ >> + phys_addr_t rsc_table; >> + void __iomem *rsc_va; >> + size_t table_sz; >> + int ret; >> + >> + ret = tee_rproc_load_fw(rproc, fw); >> + if (ret) >> + return ret; >> + >> + ret = tee_rproc_get_loaded_rsc_table(rproc, &rsc_table, &table_sz); >> + if (ret) >> + return ret; >> + >> + /* >> + * We assume here that the memory mapping is the same between the TEE and Linux kernel >> + * contexts. Else a new TEE remoteproc service could be needed to get a copy of the >> + * resource table >> + */ >> + rsc_va = ioremap_wc(rsc_table, table_sz); >> + if (IS_ERR_OR_NULL(rsc_va)) { >> + dev_err(tee_rproc_ctx->dev, "Unable to map memory region: %pa+%zx\n", >> + &rsc_table, table_sz); >> + return -ENOMEM; >> + } >> + >> + /* >> + * Create a copy of the resource table to have the same behavior as the elf loader. >> + * This cached table will be used after the remoteproc stops to free resources, and for >> + * crash recovery to reapply the settings. >> + */ >> + rproc->cached_table = kmemdup((__force void *)rsc_va, table_sz, GFP_KERNEL); >> + if (!rproc->cached_table) { >> + ret = -ENOMEM; >> + goto out; >> + } >> + >> + rproc->table_ptr = rproc->cached_table; >> + rproc->table_sz = table_sz; >> + >> +out: >> + iounmap(rsc_va); >> + return ret; >> +} >> +EXPORT_SYMBOL_GPL(tee_rproc_parse_fw); >> + >> +struct resource_table *tee_rproc_find_loaded_rsc_table(struct rproc *rproc, >> + const struct firmware *fw) >> +{ >> + struct tee_rproc *trproc = rproc->tee_interface; >> + phys_addr_t rsc_table; >> + size_t table_sz; >> + int ret; >> + >> + if (!trproc) >> + return ERR_PTR(-EINVAL); >> + >> + ret = tee_rproc_get_loaded_rsc_table(rproc, &rsc_table, &table_sz); >> + if (ret) >> + return ERR_PTR(ret); >> + >> + rproc->table_sz = table_sz; >> + if (!table_sz) >> + return NULL; >> + >> + /* >> + * At this step the memory area that contains the resource table should have be declared >> + * in the remote proc platform driver and allocated by rproc_alloc_registered_carveouts(). >> + */ >> + >> + return (struct resource_table *)rproc_pa_to_va(rproc, rsc_table, table_sz, NULL); >> +} >> +EXPORT_SYMBOL_GPL(tee_rproc_find_loaded_rsc_table); >> + >> +int tee_rproc_start(struct rproc *rproc) >> +{ >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; >> + struct tee_rproc *trproc = rproc->tee_interface; >> + struct tee_ioctl_invoke_arg arg; >> + int ret = 0; >> + >> + if (!trproc) >> + return -EINVAL; >> + >> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_START_FW, &arg, param, 0); >> + >> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); >> + if (ret < 0 || arg.ret != 0) { >> + dev_err(tee_rproc_ctx->dev, >> + "TA_RPROC_FW_CMD_START_FW invoke failed TEE err: %x, ret:%x\n", >> + arg.ret, ret); >> + if (!ret) >> + return -EIO; >> + } >> + >> + return 0; >> +} >> +EXPORT_SYMBOL_GPL(tee_rproc_start); >> + >> +int tee_rproc_stop(struct rproc *rproc) >> +{ >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; >> + struct tee_rproc *trproc = rproc->tee_interface; >> + struct tee_ioctl_invoke_arg arg; >> + int ret; >> + >> + if (!trproc) >> + return -EINVAL; >> + >> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_STOP_FW, &arg, param, 0); >> + >> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); >> + if (ret < 0 || arg.ret != 0) { >> + dev_err(tee_rproc_ctx->dev, >> + "TA_RPROC_FW_CMD_STOP_FW invoke failed TEE err: %x, ret:%x\n", >> + arg.ret, ret); >> + if (!ret) >> + ret = -EIO; >> + } >> + >> + return ret; >> +} >> +EXPORT_SYMBOL_GPL(tee_rproc_stop); >> + >> +static const struct tee_client_device_id stm32_tee_rproc_id_table[] = { >> + {UUID_INIT(0x80a4c275, 0x0a47, 0x4905, >> + 0x82, 0x85, 0x14, 0x86, 0xa9, 0x77, 0x1a, 0x08)}, >> + {} >> +}; >> + >> +struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc, unsigned int rproc_id) >> +{ >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; >> + struct tee_ioctl_open_session_arg sess_arg; >> + struct tee_client_device *tee_device; >> + struct tee_rproc *trproc, *p_err; >> + int ret; >> + >> + /* >> + * Test if the device has been probed by the TEE bus. In case of failure, we ignore the >> + * reason. The bus could be not yet probed or the service not available in the secure >> + * firmware.The assumption in such a case is that the TEE remoteproc is not probed. >> + */ >> + if (!tee_rproc_ctx) >> + return ERR_PTR(-EPROBE_DEFER); >> + >> + /* Prevent tee rproc module from being removed */ >> + if (!try_module_get(THIS_MODULE)) { >> + dev_err(tee_rproc_ctx->dev, "can't get owner\n"); >> + p_err = ERR_PTR(-ENODEV); >> + goto module_put; >> + } >> + >> + trproc = devm_kzalloc(dev, sizeof(*trproc), GFP_KERNEL); >> + if (!trproc) { >> + p_err = ERR_PTR(-ENOMEM); >> + goto module_put; >> + } >> + tee_device = to_tee_client_device(tee_rproc_ctx->dev); >> + memset(&sess_arg, 0, sizeof(sess_arg)); >> + >> + memcpy(sess_arg.uuid, tee_device->id.uuid.b, TEE_IOCTL_UUID_LEN); >> + >> + sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL; >> + sess_arg.num_params = 1; >> + >> + param[0] = (struct tee_param) { >> + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, >> + .u.value.a = rproc_id, >> + }; >> + >> + ret = tee_client_open_session(tee_rproc_ctx->tee_ctx, &sess_arg, param); >> + if (ret < 0 || sess_arg.ret != 0) { >> + dev_err(dev, "tee_client_open_session failed, err: %x\n", sess_arg.ret); >> + p_err = ERR_PTR(-EINVAL); >> + goto module_put; >> + } >> + >> + trproc->parent = dev; >> + trproc->rproc_id = rproc_id; >> + trproc->session_id = sess_arg.session; >> + >> + trproc->rproc = rproc; >> + rproc->tee_interface = trproc; >> + >> + list_add_tail(&trproc->node, &tee_rproc_ctx->sessions); >> + >> + return trproc; >> + >> +module_put: >> + module_put(THIS_MODULE); >> + return p_err; >> +} >> +EXPORT_SYMBOL_GPL(tee_rproc_register); >> + >> +int tee_rproc_unregister(struct tee_rproc *trproc) >> +{ >> + struct rproc *rproc = trproc->rproc; >> + int ret; >> + >> + ret = tee_client_close_session(tee_rproc_ctx->tee_ctx, trproc->session_id); >> + if (ret < 0) >> + dev_err(trproc->parent, "tee_client_close_session failed, err: %x\n", ret); >> + >> + list_del(&trproc->node); >> + rproc->tee_interface = NULL; >> + >> + module_put(THIS_MODULE); >> + >> + return ret; >> +} >> +EXPORT_SYMBOL_GPL(tee_rproc_unregister); >> + >> +static int tee_rproc_ctx_match(struct tee_ioctl_version_data *ver, const void *data) >> +{ >> + /* Today we support only the OP-TEE, could be extend to other tees */ >> + return (ver->impl_id == TEE_IMPL_ID_OPTEE); >> +} >> + >> +static int tee_rproc_probe(struct device *dev) >> +{ >> + struct tee_context *tee_ctx; >> + int ret; >> + >> + /* Open context with TEE driver */ >> + tee_ctx = tee_client_open_context(NULL, tee_rproc_ctx_match, NULL, NULL); >> + if (IS_ERR(tee_ctx)) >> + return PTR_ERR(tee_ctx); >> + >> + tee_rproc_ctx = devm_kzalloc(dev, sizeof(*tee_ctx), GFP_KERNEL); > > I started reviewing this set - aside from the above allocation that isn't right, > I am definitely not sure about ops::pa_to_va(). There is a patchset from TI on > the mailing list [1] that also needs to translate addresses only accessible to > the remote processor and they simply enhanced their ops::da_to_va(). Perhaps > I'll find an answer as I continue to review this set... The DA to PA conversion is handled by OP-TEE when loading the firmware. Therefore, I have assumed that Linux could not know how to convert from DA to PA. This question is also relevant for the "attach" use case, I guess. If we consider that the DA to VA conversion should always be supported by the remoteproc driver, we would need to obtain the DA from OP-TEE. The impact would be to update the TA_RPROC_FW_CMD_GET_RSC_TABLE API to also return the DA. This would require changes in the OP-TEE code by adding a new output parameter to retrieve the DA. Thanks, Arnaud > > [1]. [PATCH v10 0/8] TI K3 M4F support on AM62 and AM64 SoCs > >> + if (!tee_rproc_ctx) { >> + ret = -ENOMEM; >> + goto err; >> + } >> + >> + tee_rproc_ctx->dev = dev; >> + tee_rproc_ctx->tee_ctx = tee_ctx; >> + INIT_LIST_HEAD(&tee_rproc_ctx->sessions); >> + >> + return 0; >> +err: >> + tee_client_close_context(tee_ctx); >> + >> + return ret; >> +} >> + >> +static int tee_rproc_remove(struct device *dev) >> +{ >> + struct tee_rproc *entry, *tmp; >> + >> + list_for_each_entry_safe(entry, tmp, &tee_rproc_ctx->sessions, node) { >> + tee_client_close_session(tee_rproc_ctx->tee_ctx, entry->session_id); >> + list_del(&entry->node); >> + kfree(entry); >> + } >> + >> + tee_client_close_context(tee_rproc_ctx->tee_ctx); >> + >> + return 0; >> +} >> + >> +MODULE_DEVICE_TABLE(tee, stm32_tee_rproc_id_table); >> + >> +static struct tee_client_driver tee_rproc_fw_driver = { >> + .id_table = stm32_tee_rproc_id_table, >> + .driver = { >> + .name = KBUILD_MODNAME, >> + .bus = &tee_bus_type, >> + .probe = tee_rproc_probe, >> + .remove = tee_rproc_remove, >> + }, >> +}; >> + >> +static int __init tee_rproc_fw_mod_init(void) >> +{ >> + return driver_register(&tee_rproc_fw_driver.driver); >> +} >> + >> +static void __exit tee_rproc_fw_mod_exit(void) >> +{ >> + driver_unregister(&tee_rproc_fw_driver.driver); >> +} >> + >> +module_init(tee_rproc_fw_mod_init); >> +module_exit(tee_rproc_fw_mod_exit); >> + >> +MODULE_DESCRIPTION(" TEE remote processor control driver"); >> +MODULE_LICENSE("GPL"); >> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h >> index 28aa62a3b505..6168f778414f 100644 >> --- a/include/linux/remoteproc.h >> +++ b/include/linux/remoteproc.h >> @@ -505,6 +505,8 @@ enum rproc_features { >> RPROC_MAX_FEATURES, >> }; >> >> +struct tee_rproc; >> + >> /** >> * struct rproc - represents a physical remote processor device >> * @node: list node of this rproc object >> @@ -547,6 +549,7 @@ enum rproc_features { >> * @cdev: character device of the rproc >> * @cdev_put_on_release: flag to indicate if remoteproc should be shutdown on @char_dev release >> * @features: indicate remoteproc features >> + * @tee_interface: pointer to the remoteproc tee context >> */ >> struct rproc { >> struct list_head node; >> @@ -588,6 +591,7 @@ struct rproc { >> struct cdev cdev; >> bool cdev_put_on_release; >> DECLARE_BITMAP(features, RPROC_MAX_FEATURES); >> + struct tee_rproc *tee_interface; >> }; >> >> /** >> diff --git a/include/linux/tee_remoteproc.h b/include/linux/tee_remoteproc.h >> new file mode 100644 >> index 000000000000..c9ae4f60e844 >> --- /dev/null >> +++ b/include/linux/tee_remoteproc.h >> @@ -0,0 +1,100 @@ >> +/* SPDX-License-Identifier: GPL-2.0-or-later */ >> +/* >> + * Copyright(c) 2024 STMicroelectronics - All Rights Reserved >> + */ >> + >> +#ifndef TEE_REMOTEPROC_H >> +#define TEE_REMOTEPROC_H >> + >> +#include <linux/tee_drv.h> >> +#include <linux/firmware.h> >> +#include <linux/remoteproc.h> >> + >> +struct rproc; >> + >> +/** >> + * struct tee_rproc - TEE remoteproc structure >> + * @node: Reference in list >> + * @rproc: Remoteproc reference >> + * @parent: Parent device >> + * @rproc_id: Identifier of the target firmware >> + * @session_id: TEE session identifier >> + */ >> +struct tee_rproc { >> + struct list_head node; >> + struct rproc *rproc; >> + struct device *parent; >> + u32 rproc_id; >> + u32 session_id; >> +}; >> + >> +#if IS_REACHABLE(CONFIG_TEE_REMOTEPROC) >> + >> +struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc, >> + unsigned int rproc_id); >> +int tee_rproc_unregister(struct tee_rproc *trproc); >> +int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw); >> +int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw); >> +struct resource_table *tee_rproc_find_loaded_rsc_table(struct rproc *rproc, >> + const struct firmware *fw); >> +int tee_rproc_start(struct rproc *rproc); >> +int tee_rproc_stop(struct rproc *rproc); >> + >> +#else >> + >> +static inline struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc, >> + unsigned int rproc_id) >> +{ >> + return ERR_PTR(-ENODEV); >> +} >> + >> +static int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) >> +{ >> + /* This shouldn't be possible */ >> + WARN_ON(1); >> + >> + return 0; >> +} >> + >> +static inline int tee_rproc_unregister(struct tee_rproc *trproc) >> +{ >> + /* This shouldn't be possible */ >> + WARN_ON(1); >> + >> + return 0; >> +} >> + >> +static inline int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw) >> +{ >> + /* This shouldn't be possible */ >> + WARN_ON(1); >> + >> + return 0; >> +} >> + >> +static inline int tee_rproc_start(struct rproc *rproc) >> +{ >> + /* This shouldn't be possible */ >> + WARN_ON(1); >> + >> + return 0; >> +} >> + >> +static inline int tee_rproc_stop(struct rproc *rproc) >> +{ >> + /* This shouldn't be possible */ >> + WARN_ON(1); >> + >> + return 0; >> +} >> + >> +static inline struct resource_table * >> +tee_rproc_find_loaded_rsc_table(struct rproc *rproc, const struct firmware *fw) >> +{ >> + /* This shouldn't be possible */ >> + WARN_ON(1); >> + >> + return NULL; >> +} >> +#endif /* CONFIG_TEE_REMOTEPROC */ >> +#endif /* TEE_REMOTEPROC_H */ >> -- >> 2.25.1 >>
On Tue, Jun 11, 2024 at 09:39:01AM +0200, Arnaud Pouliquen wrote: > Add a remoteproc TEE (Trusted Execution Environment) driver > that will be probed by the TEE bus. If the associated Trusted > application is supported on secure part this driver offers a client > interface to load a firmware in the secure part. s/in/by > This firmware could be authenticated by the secure trusted application. > > Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> > --- > update from V > - Fix missing "{" in tee_rproc_find_loaded_rsc_table inline definition. > > update from V5 > - make tee_rproc_get_loaded_rsc_table() local and replace this API by > tee_rproc_find_loaded_rsc_table() > - map and unmap the resource table in tee_rproc_parse_fw to make a cached copy > - use the new rproc_pa_to_va() API to map the resource table memory declared in carevout > - remove tee_rproc_release_loaded_rsc_table as no more used. > --- > drivers/remoteproc/Kconfig | 10 + > drivers/remoteproc/Makefile | 1 + > drivers/remoteproc/tee_remoteproc.c | 451 ++++++++++++++++++++++++++++ > include/linux/remoteproc.h | 4 + > include/linux/tee_remoteproc.h | 100 ++++++ > 5 files changed, 566 insertions(+) > create mode 100644 drivers/remoteproc/tee_remoteproc.c > create mode 100644 include/linux/tee_remoteproc.h I think this is a core module and theredore should follow the remoteproc_xyz convention. I would rename these to remoteproc_tee.{c|h}. The names of the functions inside the files can remain unchanged. > > diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig > index 48845dc8fa85..6c1c07202276 100644 > --- a/drivers/remoteproc/Kconfig > +++ b/drivers/remoteproc/Kconfig > @@ -365,6 +365,16 @@ config XLNX_R5_REMOTEPROC > > It's safe to say N if not interested in using RPU r5f cores. > > + > +config TEE_REMOTEPROC > + tristate "Remoteproc support by a TEE application" > + depends on OPTEE > + help > + Support a remote processor with a TEE application. The Trusted > + Execution Context is responsible for loading the trusted firmware > + image and managing the remote processor's lifecycle. > + This can be either built-in or a loadable module. > + > endif # REMOTEPROC > > endmenu > diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile > index 91314a9b43ce..fa8daebce277 100644 > --- a/drivers/remoteproc/Makefile > +++ b/drivers/remoteproc/Makefile > @@ -36,6 +36,7 @@ obj-$(CONFIG_RCAR_REMOTEPROC) += rcar_rproc.o > obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o > obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o > obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o > +obj-$(CONFIG_TEE_REMOTEPROC) += tee_remoteproc.o > obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o > obj-$(CONFIG_TI_K3_R5_REMOTEPROC) += ti_k3_r5_remoteproc.o > obj-$(CONFIG_XLNX_R5_REMOTEPROC) += xlnx_r5_remoteproc.o > diff --git a/drivers/remoteproc/tee_remoteproc.c b/drivers/remoteproc/tee_remoteproc.c > new file mode 100644 > index 000000000000..9455fd9d0d2d > --- /dev/null > +++ b/drivers/remoteproc/tee_remoteproc.c > @@ -0,0 +1,451 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * Copyright (C) STMicroelectronics 2024 - All Rights Reserved > + * Author: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> > + */ > + > +#include <linux/firmware.h> > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/remoteproc.h> > +#include <linux/slab.h> > +#include <linux/tee_drv.h> > +#include <linux/tee_remoteproc.h> > + > +#include "remoteproc_internal.h" > + > +#define MAX_TEE_PARAM_ARRY_MEMBER 4 > + > +/* > + * Authentication of the firmware and load in the remote processor memory > + * > + * [in] params[0].value.a: unique 32bit identifier of the remote processor > + * [in] params[1].memref: buffer containing the image of the buffer > + */ > +#define TA_RPROC_FW_CMD_LOAD_FW 1 > + > +/* > + * Start the remote processor > + * > + * [in] params[0].value.a: unique 32bit identifier of the remote processor > + */ > +#define TA_RPROC_FW_CMD_START_FW 2 > + > +/* > + * Stop the remote processor > + * > + * [in] params[0].value.a: unique 32bit identifier of the remote processor > + */ > +#define TA_RPROC_FW_CMD_STOP_FW 3 > + > +/* > + * Return the address of the resource table, or 0 if not found > + * No check is done to verify that the address returned is accessible by > + * the non secure context. If the resource table is loaded in a protected > + * memory the access by the non secure context will lead to a data abort. > + * > + * [in] params[0].value.a: unique 32bit identifier of the remote processor > + * [out] params[1].value.a: 32bit LSB resource table memory address > + * [out] params[1].value.b: 32bit MSB resource table memory address > + * [out] params[2].value.a: 32bit LSB resource table memory size > + * [out] params[2].value.b: 32bit MSB resource table memory size > + */ > +#define TA_RPROC_FW_CMD_GET_RSC_TABLE 4 > + > +/* > + * Return the address of the core dump > + * > + * [in] params[0].value.a: unique 32bit identifier of the remote processor > + * [out] params[1].memref: address of the core dump image if exist, > + * else return Null > + */ > +#define TA_RPROC_FW_CMD_GET_COREDUMP 5 > + > +struct tee_rproc_context { > + struct list_head sessions; > + struct tee_context *tee_ctx; > + struct device *dev; > +}; > + > +static struct tee_rproc_context *tee_rproc_ctx; > + > +static void tee_rproc_prepare_args(struct tee_rproc *trproc, int cmd, > + struct tee_ioctl_invoke_arg *arg, > + struct tee_param *param, > + unsigned int num_params) > +{ > + memset(arg, 0, sizeof(*arg)); > + memset(param, 0, MAX_TEE_PARAM_ARRY_MEMBER * sizeof(*param)); > + > + arg->func = cmd; > + arg->session = trproc->session_id; > + arg->num_params = num_params + 1; > + > + param[0] = (struct tee_param) { > + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, > + .u.value.a = trproc->rproc_id, > + }; > +} > + > +int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw) > +{ > + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > + struct tee_rproc *trproc = rproc->tee_interface; > + struct tee_ioctl_invoke_arg arg; > + struct tee_shm *fw_shm; > + int ret; > + > + if (!trproc) > + return -EINVAL; > + > + fw_shm = tee_shm_register_kernel_buf(tee_rproc_ctx->tee_ctx, (void *)fw->data, fw->size); > + if (IS_ERR(fw_shm)) > + return PTR_ERR(fw_shm); > + > + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_LOAD_FW, &arg, param, 1); > + > + /* Provide the address of the firmware image */ > + param[1] = (struct tee_param) { > + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT, > + .u.memref = { > + .shm = fw_shm, > + .size = fw->size, > + .shm_offs = 0, > + }, > + }; > + > + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); > + if (ret < 0 || arg.ret != 0) { > + dev_err(tee_rproc_ctx->dev, > + "TA_RPROC_FW_CMD_LOAD_FW invoke failed TEE err: %x, ret:%x\n", > + arg.ret, ret); > + if (!ret) > + ret = -EIO; > + } > + > + tee_shm_free(fw_shm); > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(tee_rproc_load_fw); > + > +static int tee_rproc_get_loaded_rsc_table(struct rproc *rproc, phys_addr_t *rsc_pa, > + size_t *table_sz) > +{ > + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > + struct tee_rproc *trproc = rproc->tee_interface; > + struct tee_ioctl_invoke_arg arg; > + int ret; > + > + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_GET_RSC_TABLE, &arg, param, 2); > + > + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT; > + param[2].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT; > + > + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); > + if (ret < 0 || arg.ret != 0) { > + dev_err(tee_rproc_ctx->dev, > + "TA_RPROC_FW_CMD_GET_RSC_TABLE invoke failed TEE err: %x, ret:%x\n", > + arg.ret, ret); > + return -EIO; > + } > + > + *table_sz = param[2].u.value.a; > + > + if (*table_sz) > + *rsc_pa = param[1].u.value.a; > + else > + *rsc_pa = 0; > + > + return 0; > +} > + > +int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) > +{ > + phys_addr_t rsc_table; > + void __iomem *rsc_va; > + size_t table_sz; > + int ret; > + > + ret = tee_rproc_load_fw(rproc, fw); > + if (ret) > + return ret; > + > + ret = tee_rproc_get_loaded_rsc_table(rproc, &rsc_table, &table_sz); > + if (ret) > + return ret; > + > + /* > + * We assume here that the memory mapping is the same between the TEE and Linux kernel > + * contexts. Else a new TEE remoteproc service could be needed to get a copy of the > + * resource table > + */ > + rsc_va = ioremap_wc(rsc_table, table_sz); > + if (IS_ERR_OR_NULL(rsc_va)) { > + dev_err(tee_rproc_ctx->dev, "Unable to map memory region: %pa+%zx\n", > + &rsc_table, table_sz); > + return -ENOMEM; > + } > + > + /* > + * Create a copy of the resource table to have the same behavior as the elf loader. > + * This cached table will be used after the remoteproc stops to free resources, and for > + * crash recovery to reapply the settings. > + */ > + rproc->cached_table = kmemdup((__force void *)rsc_va, table_sz, GFP_KERNEL); > + if (!rproc->cached_table) { > + ret = -ENOMEM; > + goto out; > + } > + > + rproc->table_ptr = rproc->cached_table; > + rproc->table_sz = table_sz; > + > +out: > + iounmap(rsc_va); > + return ret; > +} > +EXPORT_SYMBOL_GPL(tee_rproc_parse_fw); > + > +struct resource_table *tee_rproc_find_loaded_rsc_table(struct rproc *rproc, > + const struct firmware *fw) > +{ > + struct tee_rproc *trproc = rproc->tee_interface; > + phys_addr_t rsc_table; > + size_t table_sz; > + int ret; > + > + if (!trproc) > + return ERR_PTR(-EINVAL); > + > + ret = tee_rproc_get_loaded_rsc_table(rproc, &rsc_table, &table_sz); > + if (ret) > + return ERR_PTR(ret); > + > + rproc->table_sz = table_sz; > + if (!table_sz) > + return NULL; > + > + /* > + * At this step the memory area that contains the resource table should have be declared > + * in the remote proc platform driver and allocated by rproc_alloc_registered_carveouts(). > + */ > + Extra newline > + return (struct resource_table *)rproc_pa_to_va(rproc, rsc_table, table_sz, NULL); > +} > +EXPORT_SYMBOL_GPL(tee_rproc_find_loaded_rsc_table); > + > +int tee_rproc_start(struct rproc *rproc) > +{ > + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > + struct tee_rproc *trproc = rproc->tee_interface; > + struct tee_ioctl_invoke_arg arg; > + int ret = 0; > + > + if (!trproc) > + return -EINVAL; > + > + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_START_FW, &arg, param, 0); > + > + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); > + if (ret < 0 || arg.ret != 0) { > + dev_err(tee_rproc_ctx->dev, > + "TA_RPROC_FW_CMD_START_FW invoke failed TEE err: %x, ret:%x\n", > + arg.ret, ret); > + if (!ret) > + return -EIO; > + } > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(tee_rproc_start); > + > +int tee_rproc_stop(struct rproc *rproc) > +{ > + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > + struct tee_rproc *trproc = rproc->tee_interface; > + struct tee_ioctl_invoke_arg arg; > + int ret; > + > + if (!trproc) > + return -EINVAL; > + > + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_STOP_FW, &arg, param, 0); > + > + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); > + if (ret < 0 || arg.ret != 0) { > + dev_err(tee_rproc_ctx->dev, > + "TA_RPROC_FW_CMD_STOP_FW invoke failed TEE err: %x, ret:%x\n", > + arg.ret, ret); > + if (!ret) > + ret = -EIO; > + } > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(tee_rproc_stop); > + > +static const struct tee_client_device_id stm32_tee_rproc_id_table[] = { This driver is supposed to be as generic as possible, and other backend in the secure world may wish to use it. As such this should probably be called tee_rproc_id_table. > + {UUID_INIT(0x80a4c275, 0x0a47, 0x4905, > + 0x82, 0x85, 0x14, 0x86, 0xa9, 0x77, 0x1a, 0x08)}, > + {} > +}; > + > +struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc, unsigned int rproc_id) > +{ > + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > + struct tee_ioctl_open_session_arg sess_arg; > + struct tee_client_device *tee_device; > + struct tee_rproc *trproc, *p_err; > + int ret; > + > + /* > + * Test if the device has been probed by the TEE bus. In case of failure, we ignore the > + * reason. The bus could be not yet probed or the service not available in the secure > + * firmware.The assumption in such a case is that the TEE remoteproc is not probed. > + */ > + if (!tee_rproc_ctx) > + return ERR_PTR(-EPROBE_DEFER); > + > + /* Prevent tee rproc module from being removed */ > + if (!try_module_get(THIS_MODULE)) { > + dev_err(tee_rproc_ctx->dev, "can't get owner\n"); > + p_err = ERR_PTR(-ENODEV); > + goto module_put; There is no point in calling module_put() if the get operation failed. > + } > + > + trproc = devm_kzalloc(dev, sizeof(*trproc), GFP_KERNEL); > + if (!trproc) { > + p_err = ERR_PTR(-ENOMEM); > + goto module_put; > + } > + tee_device = to_tee_client_device(tee_rproc_ctx->dev); > + memset(&sess_arg, 0, sizeof(sess_arg)); > + > + memcpy(sess_arg.uuid, tee_device->id.uuid.b, TEE_IOCTL_UUID_LEN); > + > + sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL; > + sess_arg.num_params = 1; > + > + param[0] = (struct tee_param) { > + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, > + .u.value.a = rproc_id, > + }; > + > + ret = tee_client_open_session(tee_rproc_ctx->tee_ctx, &sess_arg, param); > + if (ret < 0 || sess_arg.ret != 0) { > + dev_err(dev, "tee_client_open_session failed, err: %x\n", sess_arg.ret); > + p_err = ERR_PTR(-EINVAL); > + goto module_put; > + } > + > + trproc->parent = dev; Extra space > + trproc->rproc_id = rproc_id; > + trproc->session_id = sess_arg.session; > + > + trproc->rproc = rproc; > + rproc->tee_interface = trproc; > + > + list_add_tail(&trproc->node, &tee_rproc_ctx->sessions); > + > + return trproc; > + > +module_put: > + module_put(THIS_MODULE); > + return p_err; > +} > +EXPORT_SYMBOL_GPL(tee_rproc_register); > + > +int tee_rproc_unregister(struct tee_rproc *trproc) > +{ > + struct rproc *rproc = trproc->rproc; > + int ret; > + > + ret = tee_client_close_session(tee_rproc_ctx->tee_ctx, trproc->session_id); > + if (ret < 0) > + dev_err(trproc->parent, "tee_client_close_session failed, err: %x\n", ret); > + > + list_del(&trproc->node); > + rproc->tee_interface = NULL; > + > + module_put(THIS_MODULE); > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(tee_rproc_unregister); > + > +static int tee_rproc_ctx_match(struct tee_ioctl_version_data *ver, const void *data) > +{ > + /* Today we support only the OP-TEE, could be extend to other tees */ > + return (ver->impl_id == TEE_IMPL_ID_OPTEE); > +} > + > +static int tee_rproc_probe(struct device *dev) > +{ > + struct tee_context *tee_ctx; > + int ret; > + > + /* Open context with TEE driver */ > + tee_ctx = tee_client_open_context(NULL, tee_rproc_ctx_match, NULL, NULL); > + if (IS_ERR(tee_ctx)) > + return PTR_ERR(tee_ctx); > + > + tee_rproc_ctx = devm_kzalloc(dev, sizeof(*tee_ctx), GFP_KERNEL); > + if (!tee_rproc_ctx) { > + ret = -ENOMEM; > + goto err; > + } > + > + tee_rproc_ctx->dev = dev; > + tee_rproc_ctx->tee_ctx = tee_ctx; > + INIT_LIST_HEAD(&tee_rproc_ctx->sessions); > + > + return 0; > +err: > + tee_client_close_context(tee_ctx); > + > + return ret; > +} > + > +static int tee_rproc_remove(struct device *dev) > +{ > + struct tee_rproc *entry, *tmp; > + > + list_for_each_entry_safe(entry, tmp, &tee_rproc_ctx->sessions, node) { > + tee_client_close_session(tee_rproc_ctx->tee_ctx, entry->session_id); > + list_del(&entry->node); > + kfree(entry); > + } > + > + tee_client_close_context(tee_rproc_ctx->tee_ctx); > + > + return 0; > +} > + > +MODULE_DEVICE_TABLE(tee, stm32_tee_rproc_id_table); > + > +static struct tee_client_driver tee_rproc_fw_driver = { > + .id_table = stm32_tee_rproc_id_table, > + .driver = { > + .name = KBUILD_MODNAME, > + .bus = &tee_bus_type, > + .probe = tee_rproc_probe, > + .remove = tee_rproc_remove, > + }, > +}; > + > +static int __init tee_rproc_fw_mod_init(void) > +{ > + return driver_register(&tee_rproc_fw_driver.driver); > +} > + > +static void __exit tee_rproc_fw_mod_exit(void) > +{ > + driver_unregister(&tee_rproc_fw_driver.driver); > +} > + > +module_init(tee_rproc_fw_mod_init); > +module_exit(tee_rproc_fw_mod_exit); > + > +MODULE_DESCRIPTION(" TEE remote processor control driver"); > +MODULE_LICENSE("GPL"); > diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h > index 28aa62a3b505..6168f778414f 100644 > --- a/include/linux/remoteproc.h > +++ b/include/linux/remoteproc.h > @@ -505,6 +505,8 @@ enum rproc_features { > RPROC_MAX_FEATURES, > }; > > +struct tee_rproc; > + > /** > * struct rproc - represents a physical remote processor device > * @node: list node of this rproc object > @@ -547,6 +549,7 @@ enum rproc_features { > * @cdev: character device of the rproc > * @cdev_put_on_release: flag to indicate if remoteproc should be shutdown on @char_dev release > * @features: indicate remoteproc features > + * @tee_interface: pointer to the remoteproc tee context > */ > struct rproc { > struct list_head node; > @@ -588,6 +591,7 @@ struct rproc { > struct cdev cdev; > bool cdev_put_on_release; > DECLARE_BITMAP(features, RPROC_MAX_FEATURES); > + struct tee_rproc *tee_interface; > }; > > /** > diff --git a/include/linux/tee_remoteproc.h b/include/linux/tee_remoteproc.h > new file mode 100644 > index 000000000000..c9ae4f60e844 > --- /dev/null > +++ b/include/linux/tee_remoteproc.h > @@ -0,0 +1,100 @@ > +/* SPDX-License-Identifier: GPL-2.0-or-later */ > +/* > + * Copyright(c) 2024 STMicroelectronics - All Rights Reserved > + */ > + > +#ifndef TEE_REMOTEPROC_H > +#define TEE_REMOTEPROC_H > + > +#include <linux/tee_drv.h> > +#include <linux/firmware.h> > +#include <linux/remoteproc.h> > + > +struct rproc; > + > +/** > + * struct tee_rproc - TEE remoteproc structure > + * @node: Reference in list > + * @rproc: Remoteproc reference > + * @parent: Parent device > + * @rproc_id: Identifier of the target firmware > + * @session_id: TEE session identifier > + */ > +struct tee_rproc { > + struct list_head node; > + struct rproc *rproc; > + struct device *parent; > + u32 rproc_id; > + u32 session_id; > +}; > + > +#if IS_REACHABLE(CONFIG_TEE_REMOTEPROC) > + > +struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc, > + unsigned int rproc_id); > +int tee_rproc_unregister(struct tee_rproc *trproc); > +int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw); > +int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw); > +struct resource_table *tee_rproc_find_loaded_rsc_table(struct rproc *rproc, > + const struct firmware *fw); > +int tee_rproc_start(struct rproc *rproc); > +int tee_rproc_stop(struct rproc *rproc); > + > +#else > + > +static inline struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc, > + unsigned int rproc_id) > +{ > + return ERR_PTR(-ENODEV); > +} > + > +static int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) > +{ > + /* This shouldn't be possible */ > + WARN_ON(1); > + > + return 0; > +} > + > +static inline int tee_rproc_unregister(struct tee_rproc *trproc) > +{ > + /* This shouldn't be possible */ > + WARN_ON(1); > + > + return 0; > +} > + > +static inline int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw) > +{ > + /* This shouldn't be possible */ > + WARN_ON(1); > + > + return 0; > +} > + > +static inline int tee_rproc_start(struct rproc *rproc) > +{ > + /* This shouldn't be possible */ > + WARN_ON(1); > + > + return 0; > +} > + > +static inline int tee_rproc_stop(struct rproc *rproc) > +{ > + /* This shouldn't be possible */ > + WARN_ON(1); > + > + return 0; > +} > + > +static inline struct resource_table * > +tee_rproc_find_loaded_rsc_table(struct rproc *rproc, const struct firmware *fw) > +{ > + /* This shouldn't be possible */ > + WARN_ON(1); > + > + return NULL; > +} > +#endif /* CONFIG_TEE_REMOTEPROC */ > +#endif /* TEE_REMOTEPROC_H */ > -- > 2.25.1 >
On Wed, Jun 19, 2024 at 06:33:05PM +0200, Arnaud POULIQUEN wrote: > Hi, > > On 6/19/24 17:41, Mathieu Poirier wrote: > > Hi, > > > > On Tue, Jun 11, 2024 at 09:39:01AM +0200, Arnaud Pouliquen wrote: > >> Add a remoteproc TEE (Trusted Execution Environment) driver > >> that will be probed by the TEE bus. If the associated Trusted > >> application is supported on secure part this driver offers a client > >> interface to load a firmware in the secure part. > >> This firmware could be authenticated by the secure trusted application. > >> > >> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> > >> --- > >> update from V > >> - Fix missing "{" in tee_rproc_find_loaded_rsc_table inline definition. > >> > >> update from V5 > >> - make tee_rproc_get_loaded_rsc_table() local and replace this API by > >> tee_rproc_find_loaded_rsc_table() > >> - map and unmap the resource table in tee_rproc_parse_fw to make a cached copy > >> - use the new rproc_pa_to_va() API to map the resource table memory declared in carevout > >> - remove tee_rproc_release_loaded_rsc_table as no more used. > >> --- > >> drivers/remoteproc/Kconfig | 10 + > >> drivers/remoteproc/Makefile | 1 + > >> drivers/remoteproc/tee_remoteproc.c | 451 ++++++++++++++++++++++++++++ > >> include/linux/remoteproc.h | 4 + > >> include/linux/tee_remoteproc.h | 100 ++++++ > >> 5 files changed, 566 insertions(+) > >> create mode 100644 drivers/remoteproc/tee_remoteproc.c > >> create mode 100644 include/linux/tee_remoteproc.h > >> > >> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig > >> index 48845dc8fa85..6c1c07202276 100644 > >> --- a/drivers/remoteproc/Kconfig > >> +++ b/drivers/remoteproc/Kconfig > >> @@ -365,6 +365,16 @@ config XLNX_R5_REMOTEPROC > >> > >> It's safe to say N if not interested in using RPU r5f cores. > >> > >> + > >> +config TEE_REMOTEPROC > >> + tristate "Remoteproc support by a TEE application" > >> + depends on OPTEE > >> + help > >> + Support a remote processor with a TEE application. The Trusted > >> + Execution Context is responsible for loading the trusted firmware > >> + image and managing the remote processor's lifecycle. > >> + This can be either built-in or a loadable module. > >> + > >> endif # REMOTEPROC > >> > >> endmenu > >> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile > >> index 91314a9b43ce..fa8daebce277 100644 > >> --- a/drivers/remoteproc/Makefile > >> +++ b/drivers/remoteproc/Makefile > >> @@ -36,6 +36,7 @@ obj-$(CONFIG_RCAR_REMOTEPROC) += rcar_rproc.o > >> obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o > >> obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o > >> obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o > >> +obj-$(CONFIG_TEE_REMOTEPROC) += tee_remoteproc.o > >> obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o > >> obj-$(CONFIG_TI_K3_R5_REMOTEPROC) += ti_k3_r5_remoteproc.o > >> obj-$(CONFIG_XLNX_R5_REMOTEPROC) += xlnx_r5_remoteproc.o > >> diff --git a/drivers/remoteproc/tee_remoteproc.c b/drivers/remoteproc/tee_remoteproc.c > >> new file mode 100644 > >> index 000000000000..9455fd9d0d2d > >> --- /dev/null > >> +++ b/drivers/remoteproc/tee_remoteproc.c > >> @@ -0,0 +1,451 @@ > >> +// SPDX-License-Identifier: GPL-2.0-or-later > >> +/* > >> + * Copyright (C) STMicroelectronics 2024 - All Rights Reserved > >> + * Author: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> > >> + */ > >> + > >> +#include <linux/firmware.h> > >> +#include <linux/io.h> > >> +#include <linux/module.h> > >> +#include <linux/remoteproc.h> > >> +#include <linux/slab.h> > >> +#include <linux/tee_drv.h> > >> +#include <linux/tee_remoteproc.h> > >> + > >> +#include "remoteproc_internal.h" > >> + > >> +#define MAX_TEE_PARAM_ARRY_MEMBER 4 > >> + > >> +/* > >> + * Authentication of the firmware and load in the remote processor memory > >> + * > >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor > >> + * [in] params[1].memref: buffer containing the image of the buffer > >> + */ > >> +#define TA_RPROC_FW_CMD_LOAD_FW 1 > >> + > >> +/* > >> + * Start the remote processor > >> + * > >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor > >> + */ > >> +#define TA_RPROC_FW_CMD_START_FW 2 > >> + > >> +/* > >> + * Stop the remote processor > >> + * > >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor > >> + */ > >> +#define TA_RPROC_FW_CMD_STOP_FW 3 > >> + > >> +/* > >> + * Return the address of the resource table, or 0 if not found > >> + * No check is done to verify that the address returned is accessible by > >> + * the non secure context. If the resource table is loaded in a protected > >> + * memory the access by the non secure context will lead to a data abort. > >> + * > >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor > >> + * [out] params[1].value.a: 32bit LSB resource table memory address > >> + * [out] params[1].value.b: 32bit MSB resource table memory address > >> + * [out] params[2].value.a: 32bit LSB resource table memory size > >> + * [out] params[2].value.b: 32bit MSB resource table memory size > >> + */ > >> +#define TA_RPROC_FW_CMD_GET_RSC_TABLE 4 > >> + > >> +/* > >> + * Return the address of the core dump > >> + * > >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor > >> + * [out] params[1].memref: address of the core dump image if exist, > >> + * else return Null > >> + */ > >> +#define TA_RPROC_FW_CMD_GET_COREDUMP 5 > >> + > >> +struct tee_rproc_context { > >> + struct list_head sessions; > >> + struct tee_context *tee_ctx; > >> + struct device *dev; > >> +}; > >> + > >> +static struct tee_rproc_context *tee_rproc_ctx; > >> + > >> +static void tee_rproc_prepare_args(struct tee_rproc *trproc, int cmd, > >> + struct tee_ioctl_invoke_arg *arg, > >> + struct tee_param *param, > >> + unsigned int num_params) > >> +{ > >> + memset(arg, 0, sizeof(*arg)); > >> + memset(param, 0, MAX_TEE_PARAM_ARRY_MEMBER * sizeof(*param)); > >> + > >> + arg->func = cmd; > >> + arg->session = trproc->session_id; > >> + arg->num_params = num_params + 1; > >> + > >> + param[0] = (struct tee_param) { > >> + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, > >> + .u.value.a = trproc->rproc_id, > >> + }; > >> +} > >> + > >> +int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw) > >> +{ > >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > >> + struct tee_rproc *trproc = rproc->tee_interface; > >> + struct tee_ioctl_invoke_arg arg; > >> + struct tee_shm *fw_shm; > >> + int ret; > >> + > >> + if (!trproc) > >> + return -EINVAL; > >> + > >> + fw_shm = tee_shm_register_kernel_buf(tee_rproc_ctx->tee_ctx, (void *)fw->data, fw->size); > >> + if (IS_ERR(fw_shm)) > >> + return PTR_ERR(fw_shm); > >> + > >> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_LOAD_FW, &arg, param, 1); > >> + > >> + /* Provide the address of the firmware image */ > >> + param[1] = (struct tee_param) { > >> + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT, > >> + .u.memref = { > >> + .shm = fw_shm, > >> + .size = fw->size, > >> + .shm_offs = 0, > >> + }, > >> + }; > >> + > >> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); > >> + if (ret < 0 || arg.ret != 0) { > >> + dev_err(tee_rproc_ctx->dev, > >> + "TA_RPROC_FW_CMD_LOAD_FW invoke failed TEE err: %x, ret:%x\n", > >> + arg.ret, ret); > >> + if (!ret) > >> + ret = -EIO; > >> + } > >> + > >> + tee_shm_free(fw_shm); > >> + > >> + return ret; > >> +} > >> +EXPORT_SYMBOL_GPL(tee_rproc_load_fw); > >> + > >> +static int tee_rproc_get_loaded_rsc_table(struct rproc *rproc, phys_addr_t *rsc_pa, > >> + size_t *table_sz) > >> +{ > >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > >> + struct tee_rproc *trproc = rproc->tee_interface; > >> + struct tee_ioctl_invoke_arg arg; > >> + int ret; > >> + > >> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_GET_RSC_TABLE, &arg, param, 2); > >> + > >> + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT; > >> + param[2].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT; > >> + > >> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); > >> + if (ret < 0 || arg.ret != 0) { > >> + dev_err(tee_rproc_ctx->dev, > >> + "TA_RPROC_FW_CMD_GET_RSC_TABLE invoke failed TEE err: %x, ret:%x\n", > >> + arg.ret, ret); > >> + return -EIO; > >> + } > >> + > >> + *table_sz = param[2].u.value.a; > >> + > >> + if (*table_sz) > >> + *rsc_pa = param[1].u.value.a; > >> + else > >> + *rsc_pa = 0; > >> + > >> + return 0; > >> +} > >> + > >> +int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) > >> +{ > >> + phys_addr_t rsc_table; > >> + void __iomem *rsc_va; > >> + size_t table_sz; > >> + int ret; > >> + > >> + ret = tee_rproc_load_fw(rproc, fw); > >> + if (ret) > >> + return ret; > >> + > >> + ret = tee_rproc_get_loaded_rsc_table(rproc, &rsc_table, &table_sz); > >> + if (ret) > >> + return ret; > >> + > >> + /* > >> + * We assume here that the memory mapping is the same between the TEE and Linux kernel > >> + * contexts. Else a new TEE remoteproc service could be needed to get a copy of the > >> + * resource table > >> + */ > >> + rsc_va = ioremap_wc(rsc_table, table_sz); > >> + if (IS_ERR_OR_NULL(rsc_va)) { > >> + dev_err(tee_rproc_ctx->dev, "Unable to map memory region: %pa+%zx\n", > >> + &rsc_table, table_sz); > >> + return -ENOMEM; > >> + } > >> + > >> + /* > >> + * Create a copy of the resource table to have the same behavior as the elf loader. > >> + * This cached table will be used after the remoteproc stops to free resources, and for > >> + * crash recovery to reapply the settings. > >> + */ > >> + rproc->cached_table = kmemdup((__force void *)rsc_va, table_sz, GFP_KERNEL); > >> + if (!rproc->cached_table) { > >> + ret = -ENOMEM; > >> + goto out; > >> + } > >> + > >> + rproc->table_ptr = rproc->cached_table; > >> + rproc->table_sz = table_sz; > >> + > >> +out: > >> + iounmap(rsc_va); > >> + return ret; > >> +} > >> +EXPORT_SYMBOL_GPL(tee_rproc_parse_fw); > >> + > >> +struct resource_table *tee_rproc_find_loaded_rsc_table(struct rproc *rproc, > >> + const struct firmware *fw) > >> +{ > >> + struct tee_rproc *trproc = rproc->tee_interface; > >> + phys_addr_t rsc_table; > >> + size_t table_sz; > >> + int ret; > >> + > >> + if (!trproc) > >> + return ERR_PTR(-EINVAL); > >> + > >> + ret = tee_rproc_get_loaded_rsc_table(rproc, &rsc_table, &table_sz); > >> + if (ret) > >> + return ERR_PTR(ret); > >> + > >> + rproc->table_sz = table_sz; > >> + if (!table_sz) > >> + return NULL; > >> + > >> + /* > >> + * At this step the memory area that contains the resource table should have be declared > >> + * in the remote proc platform driver and allocated by rproc_alloc_registered_carveouts(). > >> + */ > >> + > >> + return (struct resource_table *)rproc_pa_to_va(rproc, rsc_table, table_sz, NULL); > >> +} > >> +EXPORT_SYMBOL_GPL(tee_rproc_find_loaded_rsc_table); > >> + > >> +int tee_rproc_start(struct rproc *rproc) > >> +{ > >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > >> + struct tee_rproc *trproc = rproc->tee_interface; > >> + struct tee_ioctl_invoke_arg arg; > >> + int ret = 0; > >> + > >> + if (!trproc) > >> + return -EINVAL; > >> + > >> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_START_FW, &arg, param, 0); > >> + > >> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); > >> + if (ret < 0 || arg.ret != 0) { > >> + dev_err(tee_rproc_ctx->dev, > >> + "TA_RPROC_FW_CMD_START_FW invoke failed TEE err: %x, ret:%x\n", > >> + arg.ret, ret); > >> + if (!ret) > >> + return -EIO; > >> + } > >> + > >> + return 0; > >> +} > >> +EXPORT_SYMBOL_GPL(tee_rproc_start); > >> + > >> +int tee_rproc_stop(struct rproc *rproc) > >> +{ > >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > >> + struct tee_rproc *trproc = rproc->tee_interface; > >> + struct tee_ioctl_invoke_arg arg; > >> + int ret; > >> + > >> + if (!trproc) > >> + return -EINVAL; > >> + > >> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_STOP_FW, &arg, param, 0); > >> + > >> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); > >> + if (ret < 0 || arg.ret != 0) { > >> + dev_err(tee_rproc_ctx->dev, > >> + "TA_RPROC_FW_CMD_STOP_FW invoke failed TEE err: %x, ret:%x\n", > >> + arg.ret, ret); > >> + if (!ret) > >> + ret = -EIO; > >> + } > >> + > >> + return ret; > >> +} > >> +EXPORT_SYMBOL_GPL(tee_rproc_stop); > >> + > >> +static const struct tee_client_device_id stm32_tee_rproc_id_table[] = { > >> + {UUID_INIT(0x80a4c275, 0x0a47, 0x4905, > >> + 0x82, 0x85, 0x14, 0x86, 0xa9, 0x77, 0x1a, 0x08)}, > >> + {} > >> +}; > >> + > >> +struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc, unsigned int rproc_id) > >> +{ > >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; > >> + struct tee_ioctl_open_session_arg sess_arg; > >> + struct tee_client_device *tee_device; > >> + struct tee_rproc *trproc, *p_err; > >> + int ret; > >> + > >> + /* > >> + * Test if the device has been probed by the TEE bus. In case of failure, we ignore the > >> + * reason. The bus could be not yet probed or the service not available in the secure > >> + * firmware.The assumption in such a case is that the TEE remoteproc is not probed. > >> + */ > >> + if (!tee_rproc_ctx) > >> + return ERR_PTR(-EPROBE_DEFER); > >> + > >> + /* Prevent tee rproc module from being removed */ > >> + if (!try_module_get(THIS_MODULE)) { > >> + dev_err(tee_rproc_ctx->dev, "can't get owner\n"); > >> + p_err = ERR_PTR(-ENODEV); > >> + goto module_put; > >> + } > >> + > >> + trproc = devm_kzalloc(dev, sizeof(*trproc), GFP_KERNEL); > >> + if (!trproc) { > >> + p_err = ERR_PTR(-ENOMEM); > >> + goto module_put; > >> + } > >> + tee_device = to_tee_client_device(tee_rproc_ctx->dev); > >> + memset(&sess_arg, 0, sizeof(sess_arg)); > >> + > >> + memcpy(sess_arg.uuid, tee_device->id.uuid.b, TEE_IOCTL_UUID_LEN); > >> + > >> + sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL; > >> + sess_arg.num_params = 1; > >> + > >> + param[0] = (struct tee_param) { > >> + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, > >> + .u.value.a = rproc_id, > >> + }; > >> + > >> + ret = tee_client_open_session(tee_rproc_ctx->tee_ctx, &sess_arg, param); > >> + if (ret < 0 || sess_arg.ret != 0) { > >> + dev_err(dev, "tee_client_open_session failed, err: %x\n", sess_arg.ret); > >> + p_err = ERR_PTR(-EINVAL); > >> + goto module_put; > >> + } > >> + > >> + trproc->parent = dev; > >> + trproc->rproc_id = rproc_id; > >> + trproc->session_id = sess_arg.session; > >> + > >> + trproc->rproc = rproc; > >> + rproc->tee_interface = trproc; > >> + > >> + list_add_tail(&trproc->node, &tee_rproc_ctx->sessions); > >> + > >> + return trproc; > >> + > >> +module_put: > >> + module_put(THIS_MODULE); > >> + return p_err; > >> +} > >> +EXPORT_SYMBOL_GPL(tee_rproc_register); > >> + > >> +int tee_rproc_unregister(struct tee_rproc *trproc) > >> +{ > >> + struct rproc *rproc = trproc->rproc; > >> + int ret; > >> + > >> + ret = tee_client_close_session(tee_rproc_ctx->tee_ctx, trproc->session_id); > >> + if (ret < 0) > >> + dev_err(trproc->parent, "tee_client_close_session failed, err: %x\n", ret); > >> + > >> + list_del(&trproc->node); > >> + rproc->tee_interface = NULL; > >> + > >> + module_put(THIS_MODULE); > >> + > >> + return ret; > >> +} > >> +EXPORT_SYMBOL_GPL(tee_rproc_unregister); > >> + > >> +static int tee_rproc_ctx_match(struct tee_ioctl_version_data *ver, const void *data) > >> +{ > >> + /* Today we support only the OP-TEE, could be extend to other tees */ > >> + return (ver->impl_id == TEE_IMPL_ID_OPTEE); > >> +} > >> + > >> +static int tee_rproc_probe(struct device *dev) > >> +{ > >> + struct tee_context *tee_ctx; > >> + int ret; > >> + > >> + /* Open context with TEE driver */ > >> + tee_ctx = tee_client_open_context(NULL, tee_rproc_ctx_match, NULL, NULL); > >> + if (IS_ERR(tee_ctx)) > >> + return PTR_ERR(tee_ctx); > >> + > >> + tee_rproc_ctx = devm_kzalloc(dev, sizeof(*tee_ctx), GFP_KERNEL); > > > > I started reviewing this set - aside from the above allocation that isn't right, > > I am definitely not sure about ops::pa_to_va(). There is a patchset from TI on > > the mailing list [1] that also needs to translate addresses only accessible to > > the remote processor and they simply enhanced their ops::da_to_va(). Perhaps > > I'll find an answer as I continue to review this set... > > > The DA to PA conversion is handled by OP-TEE when loading the firmware. > Therefore, I have assumed that Linux could not know how to convert from DA to > PA. This question is also relevant for the "attach" use case, I guess. > > If we consider that the DA to VA conversion should always be supported by the > remoteproc driver, we would need to obtain the DA from OP-TEE. > > The impact would be to update the TA_RPROC_FW_CMD_GET_RSC_TABLE API to also > return the DA. This would require changes in the OP-TEE code by adding a new > output parameter to retrieve the DA. I don't like all the alternate solutions to rproc_pa_to_va() that I come up with so let's keep it for now. > > Thanks, > Arnaud > > > > > > [1]. [PATCH v10 0/8] TI K3 M4F support on AM62 and AM64 SoCs > > > >> + if (!tee_rproc_ctx) { > >> + ret = -ENOMEM; > >> + goto err; > >> + } > >> + > >> + tee_rproc_ctx->dev = dev; > >> + tee_rproc_ctx->tee_ctx = tee_ctx; > >> + INIT_LIST_HEAD(&tee_rproc_ctx->sessions); > >> + > >> + return 0; > >> +err: > >> + tee_client_close_context(tee_ctx); > >> + > >> + return ret; > >> +} > >> + > >> +static int tee_rproc_remove(struct device *dev) > >> +{ > >> + struct tee_rproc *entry, *tmp; > >> + > >> + list_for_each_entry_safe(entry, tmp, &tee_rproc_ctx->sessions, node) { > >> + tee_client_close_session(tee_rproc_ctx->tee_ctx, entry->session_id); > >> + list_del(&entry->node); > >> + kfree(entry); > >> + } > >> + > >> + tee_client_close_context(tee_rproc_ctx->tee_ctx); > >> + > >> + return 0; > >> +} > >> + > >> +MODULE_DEVICE_TABLE(tee, stm32_tee_rproc_id_table); > >> + > >> +static struct tee_client_driver tee_rproc_fw_driver = { > >> + .id_table = stm32_tee_rproc_id_table, > >> + .driver = { > >> + .name = KBUILD_MODNAME, > >> + .bus = &tee_bus_type, > >> + .probe = tee_rproc_probe, > >> + .remove = tee_rproc_remove, > >> + }, > >> +}; > >> + > >> +static int __init tee_rproc_fw_mod_init(void) > >> +{ > >> + return driver_register(&tee_rproc_fw_driver.driver); > >> +} > >> + > >> +static void __exit tee_rproc_fw_mod_exit(void) > >> +{ > >> + driver_unregister(&tee_rproc_fw_driver.driver); > >> +} > >> + > >> +module_init(tee_rproc_fw_mod_init); > >> +module_exit(tee_rproc_fw_mod_exit); > >> + > >> +MODULE_DESCRIPTION(" TEE remote processor control driver"); > >> +MODULE_LICENSE("GPL"); > >> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h > >> index 28aa62a3b505..6168f778414f 100644 > >> --- a/include/linux/remoteproc.h > >> +++ b/include/linux/remoteproc.h > >> @@ -505,6 +505,8 @@ enum rproc_features { > >> RPROC_MAX_FEATURES, > >> }; > >> > >> +struct tee_rproc; > >> + > >> /** > >> * struct rproc - represents a physical remote processor device > >> * @node: list node of this rproc object > >> @@ -547,6 +549,7 @@ enum rproc_features { > >> * @cdev: character device of the rproc > >> * @cdev_put_on_release: flag to indicate if remoteproc should be shutdown on @char_dev release > >> * @features: indicate remoteproc features > >> + * @tee_interface: pointer to the remoteproc tee context > >> */ > >> struct rproc { > >> struct list_head node; > >> @@ -588,6 +591,7 @@ struct rproc { > >> struct cdev cdev; > >> bool cdev_put_on_release; > >> DECLARE_BITMAP(features, RPROC_MAX_FEATURES); > >> + struct tee_rproc *tee_interface; > >> }; > >> > >> /** > >> diff --git a/include/linux/tee_remoteproc.h b/include/linux/tee_remoteproc.h > >> new file mode 100644 > >> index 000000000000..c9ae4f60e844 > >> --- /dev/null > >> +++ b/include/linux/tee_remoteproc.h > >> @@ -0,0 +1,100 @@ > >> +/* SPDX-License-Identifier: GPL-2.0-or-later */ > >> +/* > >> + * Copyright(c) 2024 STMicroelectronics - All Rights Reserved > >> + */ > >> + > >> +#ifndef TEE_REMOTEPROC_H > >> +#define TEE_REMOTEPROC_H > >> + > >> +#include <linux/tee_drv.h> > >> +#include <linux/firmware.h> > >> +#include <linux/remoteproc.h> > >> + > >> +struct rproc; > >> + > >> +/** > >> + * struct tee_rproc - TEE remoteproc structure > >> + * @node: Reference in list > >> + * @rproc: Remoteproc reference > >> + * @parent: Parent device > >> + * @rproc_id: Identifier of the target firmware > >> + * @session_id: TEE session identifier > >> + */ > >> +struct tee_rproc { > >> + struct list_head node; > >> + struct rproc *rproc; > >> + struct device *parent; > >> + u32 rproc_id; > >> + u32 session_id; > >> +}; > >> + > >> +#if IS_REACHABLE(CONFIG_TEE_REMOTEPROC) > >> + > >> +struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc, > >> + unsigned int rproc_id); > >> +int tee_rproc_unregister(struct tee_rproc *trproc); > >> +int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw); > >> +int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw); > >> +struct resource_table *tee_rproc_find_loaded_rsc_table(struct rproc *rproc, > >> + const struct firmware *fw); > >> +int tee_rproc_start(struct rproc *rproc); > >> +int tee_rproc_stop(struct rproc *rproc); > >> + > >> +#else > >> + > >> +static inline struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc, > >> + unsigned int rproc_id) > >> +{ > >> + return ERR_PTR(-ENODEV); > >> +} > >> + > >> +static int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) > >> +{ > >> + /* This shouldn't be possible */ > >> + WARN_ON(1); > >> + > >> + return 0; > >> +} > >> + > >> +static inline int tee_rproc_unregister(struct tee_rproc *trproc) > >> +{ > >> + /* This shouldn't be possible */ > >> + WARN_ON(1); > >> + > >> + return 0; > >> +} > >> + > >> +static inline int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw) > >> +{ > >> + /* This shouldn't be possible */ > >> + WARN_ON(1); > >> + > >> + return 0; > >> +} > >> + > >> +static inline int tee_rproc_start(struct rproc *rproc) > >> +{ > >> + /* This shouldn't be possible */ > >> + WARN_ON(1); > >> + > >> + return 0; > >> +} > >> + > >> +static inline int tee_rproc_stop(struct rproc *rproc) > >> +{ > >> + /* This shouldn't be possible */ > >> + WARN_ON(1); > >> + > >> + return 0; > >> +} > >> + > >> +static inline struct resource_table * > >> +tee_rproc_find_loaded_rsc_table(struct rproc *rproc, const struct firmware *fw) > >> +{ > >> + /* This shouldn't be possible */ > >> + WARN_ON(1); > >> + > >> + return NULL; > >> +} > >> +#endif /* CONFIG_TEE_REMOTEPROC */ > >> +#endif /* TEE_REMOTEPROC_H */ > >> -- > >> 2.25.1 > >>
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index 48845dc8fa85..6c1c07202276 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -365,6 +365,16 @@ config XLNX_R5_REMOTEPROC It's safe to say N if not interested in using RPU r5f cores. + +config TEE_REMOTEPROC + tristate "Remoteproc support by a TEE application" + depends on OPTEE + help + Support a remote processor with a TEE application. The Trusted + Execution Context is responsible for loading the trusted firmware + image and managing the remote processor's lifecycle. + This can be either built-in or a loadable module. + endif # REMOTEPROC endmenu diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index 91314a9b43ce..fa8daebce277 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_RCAR_REMOTEPROC) += rcar_rproc.o obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o +obj-$(CONFIG_TEE_REMOTEPROC) += tee_remoteproc.o obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o obj-$(CONFIG_TI_K3_R5_REMOTEPROC) += ti_k3_r5_remoteproc.o obj-$(CONFIG_XLNX_R5_REMOTEPROC) += xlnx_r5_remoteproc.o diff --git a/drivers/remoteproc/tee_remoteproc.c b/drivers/remoteproc/tee_remoteproc.c new file mode 100644 index 000000000000..9455fd9d0d2d --- /dev/null +++ b/drivers/remoteproc/tee_remoteproc.c @@ -0,0 +1,451 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) STMicroelectronics 2024 - All Rights Reserved + * Author: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> + */ + +#include <linux/firmware.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/remoteproc.h> +#include <linux/slab.h> +#include <linux/tee_drv.h> +#include <linux/tee_remoteproc.h> + +#include "remoteproc_internal.h" + +#define MAX_TEE_PARAM_ARRY_MEMBER 4 + +/* + * Authentication of the firmware and load in the remote processor memory + * + * [in] params[0].value.a: unique 32bit identifier of the remote processor + * [in] params[1].memref: buffer containing the image of the buffer + */ +#define TA_RPROC_FW_CMD_LOAD_FW 1 + +/* + * Start the remote processor + * + * [in] params[0].value.a: unique 32bit identifier of the remote processor + */ +#define TA_RPROC_FW_CMD_START_FW 2 + +/* + * Stop the remote processor + * + * [in] params[0].value.a: unique 32bit identifier of the remote processor + */ +#define TA_RPROC_FW_CMD_STOP_FW 3 + +/* + * Return the address of the resource table, or 0 if not found + * No check is done to verify that the address returned is accessible by + * the non secure context. If the resource table is loaded in a protected + * memory the access by the non secure context will lead to a data abort. + * + * [in] params[0].value.a: unique 32bit identifier of the remote processor + * [out] params[1].value.a: 32bit LSB resource table memory address + * [out] params[1].value.b: 32bit MSB resource table memory address + * [out] params[2].value.a: 32bit LSB resource table memory size + * [out] params[2].value.b: 32bit MSB resource table memory size + */ +#define TA_RPROC_FW_CMD_GET_RSC_TABLE 4 + +/* + * Return the address of the core dump + * + * [in] params[0].value.a: unique 32bit identifier of the remote processor + * [out] params[1].memref: address of the core dump image if exist, + * else return Null + */ +#define TA_RPROC_FW_CMD_GET_COREDUMP 5 + +struct tee_rproc_context { + struct list_head sessions; + struct tee_context *tee_ctx; + struct device *dev; +}; + +static struct tee_rproc_context *tee_rproc_ctx; + +static void tee_rproc_prepare_args(struct tee_rproc *trproc, int cmd, + struct tee_ioctl_invoke_arg *arg, + struct tee_param *param, + unsigned int num_params) +{ + memset(arg, 0, sizeof(*arg)); + memset(param, 0, MAX_TEE_PARAM_ARRY_MEMBER * sizeof(*param)); + + arg->func = cmd; + arg->session = trproc->session_id; + arg->num_params = num_params + 1; + + param[0] = (struct tee_param) { + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + .u.value.a = trproc->rproc_id, + }; +} + +int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw) +{ + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; + struct tee_rproc *trproc = rproc->tee_interface; + struct tee_ioctl_invoke_arg arg; + struct tee_shm *fw_shm; + int ret; + + if (!trproc) + return -EINVAL; + + fw_shm = tee_shm_register_kernel_buf(tee_rproc_ctx->tee_ctx, (void *)fw->data, fw->size); + if (IS_ERR(fw_shm)) + return PTR_ERR(fw_shm); + + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_LOAD_FW, &arg, param, 1); + + /* Provide the address of the firmware image */ + param[1] = (struct tee_param) { + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT, + .u.memref = { + .shm = fw_shm, + .size = fw->size, + .shm_offs = 0, + }, + }; + + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); + if (ret < 0 || arg.ret != 0) { + dev_err(tee_rproc_ctx->dev, + "TA_RPROC_FW_CMD_LOAD_FW invoke failed TEE err: %x, ret:%x\n", + arg.ret, ret); + if (!ret) + ret = -EIO; + } + + tee_shm_free(fw_shm); + + return ret; +} +EXPORT_SYMBOL_GPL(tee_rproc_load_fw); + +static int tee_rproc_get_loaded_rsc_table(struct rproc *rproc, phys_addr_t *rsc_pa, + size_t *table_sz) +{ + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; + struct tee_rproc *trproc = rproc->tee_interface; + struct tee_ioctl_invoke_arg arg; + int ret; + + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_GET_RSC_TABLE, &arg, param, 2); + + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT; + param[2].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT; + + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); + if (ret < 0 || arg.ret != 0) { + dev_err(tee_rproc_ctx->dev, + "TA_RPROC_FW_CMD_GET_RSC_TABLE invoke failed TEE err: %x, ret:%x\n", + arg.ret, ret); + return -EIO; + } + + *table_sz = param[2].u.value.a; + + if (*table_sz) + *rsc_pa = param[1].u.value.a; + else + *rsc_pa = 0; + + return 0; +} + +int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) +{ + phys_addr_t rsc_table; + void __iomem *rsc_va; + size_t table_sz; + int ret; + + ret = tee_rproc_load_fw(rproc, fw); + if (ret) + return ret; + + ret = tee_rproc_get_loaded_rsc_table(rproc, &rsc_table, &table_sz); + if (ret) + return ret; + + /* + * We assume here that the memory mapping is the same between the TEE and Linux kernel + * contexts. Else a new TEE remoteproc service could be needed to get a copy of the + * resource table + */ + rsc_va = ioremap_wc(rsc_table, table_sz); + if (IS_ERR_OR_NULL(rsc_va)) { + dev_err(tee_rproc_ctx->dev, "Unable to map memory region: %pa+%zx\n", + &rsc_table, table_sz); + return -ENOMEM; + } + + /* + * Create a copy of the resource table to have the same behavior as the elf loader. + * This cached table will be used after the remoteproc stops to free resources, and for + * crash recovery to reapply the settings. + */ + rproc->cached_table = kmemdup((__force void *)rsc_va, table_sz, GFP_KERNEL); + if (!rproc->cached_table) { + ret = -ENOMEM; + goto out; + } + + rproc->table_ptr = rproc->cached_table; + rproc->table_sz = table_sz; + +out: + iounmap(rsc_va); + return ret; +} +EXPORT_SYMBOL_GPL(tee_rproc_parse_fw); + +struct resource_table *tee_rproc_find_loaded_rsc_table(struct rproc *rproc, + const struct firmware *fw) +{ + struct tee_rproc *trproc = rproc->tee_interface; + phys_addr_t rsc_table; + size_t table_sz; + int ret; + + if (!trproc) + return ERR_PTR(-EINVAL); + + ret = tee_rproc_get_loaded_rsc_table(rproc, &rsc_table, &table_sz); + if (ret) + return ERR_PTR(ret); + + rproc->table_sz = table_sz; + if (!table_sz) + return NULL; + + /* + * At this step the memory area that contains the resource table should have be declared + * in the remote proc platform driver and allocated by rproc_alloc_registered_carveouts(). + */ + + return (struct resource_table *)rproc_pa_to_va(rproc, rsc_table, table_sz, NULL); +} +EXPORT_SYMBOL_GPL(tee_rproc_find_loaded_rsc_table); + +int tee_rproc_start(struct rproc *rproc) +{ + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; + struct tee_rproc *trproc = rproc->tee_interface; + struct tee_ioctl_invoke_arg arg; + int ret = 0; + + if (!trproc) + return -EINVAL; + + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_START_FW, &arg, param, 0); + + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); + if (ret < 0 || arg.ret != 0) { + dev_err(tee_rproc_ctx->dev, + "TA_RPROC_FW_CMD_START_FW invoke failed TEE err: %x, ret:%x\n", + arg.ret, ret); + if (!ret) + return -EIO; + } + + return 0; +} +EXPORT_SYMBOL_GPL(tee_rproc_start); + +int tee_rproc_stop(struct rproc *rproc) +{ + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; + struct tee_rproc *trproc = rproc->tee_interface; + struct tee_ioctl_invoke_arg arg; + int ret; + + if (!trproc) + return -EINVAL; + + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_STOP_FW, &arg, param, 0); + + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param); + if (ret < 0 || arg.ret != 0) { + dev_err(tee_rproc_ctx->dev, + "TA_RPROC_FW_CMD_STOP_FW invoke failed TEE err: %x, ret:%x\n", + arg.ret, ret); + if (!ret) + ret = -EIO; + } + + return ret; +} +EXPORT_SYMBOL_GPL(tee_rproc_stop); + +static const struct tee_client_device_id stm32_tee_rproc_id_table[] = { + {UUID_INIT(0x80a4c275, 0x0a47, 0x4905, + 0x82, 0x85, 0x14, 0x86, 0xa9, 0x77, 0x1a, 0x08)}, + {} +}; + +struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc, unsigned int rproc_id) +{ + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER]; + struct tee_ioctl_open_session_arg sess_arg; + struct tee_client_device *tee_device; + struct tee_rproc *trproc, *p_err; + int ret; + + /* + * Test if the device has been probed by the TEE bus. In case of failure, we ignore the + * reason. The bus could be not yet probed or the service not available in the secure + * firmware.The assumption in such a case is that the TEE remoteproc is not probed. + */ + if (!tee_rproc_ctx) + return ERR_PTR(-EPROBE_DEFER); + + /* Prevent tee rproc module from being removed */ + if (!try_module_get(THIS_MODULE)) { + dev_err(tee_rproc_ctx->dev, "can't get owner\n"); + p_err = ERR_PTR(-ENODEV); + goto module_put; + } + + trproc = devm_kzalloc(dev, sizeof(*trproc), GFP_KERNEL); + if (!trproc) { + p_err = ERR_PTR(-ENOMEM); + goto module_put; + } + tee_device = to_tee_client_device(tee_rproc_ctx->dev); + memset(&sess_arg, 0, sizeof(sess_arg)); + + memcpy(sess_arg.uuid, tee_device->id.uuid.b, TEE_IOCTL_UUID_LEN); + + sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL; + sess_arg.num_params = 1; + + param[0] = (struct tee_param) { + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + .u.value.a = rproc_id, + }; + + ret = tee_client_open_session(tee_rproc_ctx->tee_ctx, &sess_arg, param); + if (ret < 0 || sess_arg.ret != 0) { + dev_err(dev, "tee_client_open_session failed, err: %x\n", sess_arg.ret); + p_err = ERR_PTR(-EINVAL); + goto module_put; + } + + trproc->parent = dev; + trproc->rproc_id = rproc_id; + trproc->session_id = sess_arg.session; + + trproc->rproc = rproc; + rproc->tee_interface = trproc; + + list_add_tail(&trproc->node, &tee_rproc_ctx->sessions); + + return trproc; + +module_put: + module_put(THIS_MODULE); + return p_err; +} +EXPORT_SYMBOL_GPL(tee_rproc_register); + +int tee_rproc_unregister(struct tee_rproc *trproc) +{ + struct rproc *rproc = trproc->rproc; + int ret; + + ret = tee_client_close_session(tee_rproc_ctx->tee_ctx, trproc->session_id); + if (ret < 0) + dev_err(trproc->parent, "tee_client_close_session failed, err: %x\n", ret); + + list_del(&trproc->node); + rproc->tee_interface = NULL; + + module_put(THIS_MODULE); + + return ret; +} +EXPORT_SYMBOL_GPL(tee_rproc_unregister); + +static int tee_rproc_ctx_match(struct tee_ioctl_version_data *ver, const void *data) +{ + /* Today we support only the OP-TEE, could be extend to other tees */ + return (ver->impl_id == TEE_IMPL_ID_OPTEE); +} + +static int tee_rproc_probe(struct device *dev) +{ + struct tee_context *tee_ctx; + int ret; + + /* Open context with TEE driver */ + tee_ctx = tee_client_open_context(NULL, tee_rproc_ctx_match, NULL, NULL); + if (IS_ERR(tee_ctx)) + return PTR_ERR(tee_ctx); + + tee_rproc_ctx = devm_kzalloc(dev, sizeof(*tee_ctx), GFP_KERNEL); + if (!tee_rproc_ctx) { + ret = -ENOMEM; + goto err; + } + + tee_rproc_ctx->dev = dev; + tee_rproc_ctx->tee_ctx = tee_ctx; + INIT_LIST_HEAD(&tee_rproc_ctx->sessions); + + return 0; +err: + tee_client_close_context(tee_ctx); + + return ret; +} + +static int tee_rproc_remove(struct device *dev) +{ + struct tee_rproc *entry, *tmp; + + list_for_each_entry_safe(entry, tmp, &tee_rproc_ctx->sessions, node) { + tee_client_close_session(tee_rproc_ctx->tee_ctx, entry->session_id); + list_del(&entry->node); + kfree(entry); + } + + tee_client_close_context(tee_rproc_ctx->tee_ctx); + + return 0; +} + +MODULE_DEVICE_TABLE(tee, stm32_tee_rproc_id_table); + +static struct tee_client_driver tee_rproc_fw_driver = { + .id_table = stm32_tee_rproc_id_table, + .driver = { + .name = KBUILD_MODNAME, + .bus = &tee_bus_type, + .probe = tee_rproc_probe, + .remove = tee_rproc_remove, + }, +}; + +static int __init tee_rproc_fw_mod_init(void) +{ + return driver_register(&tee_rproc_fw_driver.driver); +} + +static void __exit tee_rproc_fw_mod_exit(void) +{ + driver_unregister(&tee_rproc_fw_driver.driver); +} + +module_init(tee_rproc_fw_mod_init); +module_exit(tee_rproc_fw_mod_exit); + +MODULE_DESCRIPTION(" TEE remote processor control driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h index 28aa62a3b505..6168f778414f 100644 --- a/include/linux/remoteproc.h +++ b/include/linux/remoteproc.h @@ -505,6 +505,8 @@ enum rproc_features { RPROC_MAX_FEATURES, }; +struct tee_rproc; + /** * struct rproc - represents a physical remote processor device * @node: list node of this rproc object @@ -547,6 +549,7 @@ enum rproc_features { * @cdev: character device of the rproc * @cdev_put_on_release: flag to indicate if remoteproc should be shutdown on @char_dev release * @features: indicate remoteproc features + * @tee_interface: pointer to the remoteproc tee context */ struct rproc { struct list_head node; @@ -588,6 +591,7 @@ struct rproc { struct cdev cdev; bool cdev_put_on_release; DECLARE_BITMAP(features, RPROC_MAX_FEATURES); + struct tee_rproc *tee_interface; }; /** diff --git a/include/linux/tee_remoteproc.h b/include/linux/tee_remoteproc.h new file mode 100644 index 000000000000..c9ae4f60e844 --- /dev/null +++ b/include/linux/tee_remoteproc.h @@ -0,0 +1,100 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright(c) 2024 STMicroelectronics - All Rights Reserved + */ + +#ifndef TEE_REMOTEPROC_H +#define TEE_REMOTEPROC_H + +#include <linux/tee_drv.h> +#include <linux/firmware.h> +#include <linux/remoteproc.h> + +struct rproc; + +/** + * struct tee_rproc - TEE remoteproc structure + * @node: Reference in list + * @rproc: Remoteproc reference + * @parent: Parent device + * @rproc_id: Identifier of the target firmware + * @session_id: TEE session identifier + */ +struct tee_rproc { + struct list_head node; + struct rproc *rproc; + struct device *parent; + u32 rproc_id; + u32 session_id; +}; + +#if IS_REACHABLE(CONFIG_TEE_REMOTEPROC) + +struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc, + unsigned int rproc_id); +int tee_rproc_unregister(struct tee_rproc *trproc); +int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw); +int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw); +struct resource_table *tee_rproc_find_loaded_rsc_table(struct rproc *rproc, + const struct firmware *fw); +int tee_rproc_start(struct rproc *rproc); +int tee_rproc_stop(struct rproc *rproc); + +#else + +static inline struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc, + unsigned int rproc_id) +{ + return ERR_PTR(-ENODEV); +} + +static int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) +{ + /* This shouldn't be possible */ + WARN_ON(1); + + return 0; +} + +static inline int tee_rproc_unregister(struct tee_rproc *trproc) +{ + /* This shouldn't be possible */ + WARN_ON(1); + + return 0; +} + +static inline int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw) +{ + /* This shouldn't be possible */ + WARN_ON(1); + + return 0; +} + +static inline int tee_rproc_start(struct rproc *rproc) +{ + /* This shouldn't be possible */ + WARN_ON(1); + + return 0; +} + +static inline int tee_rproc_stop(struct rproc *rproc) +{ + /* This shouldn't be possible */ + WARN_ON(1); + + return 0; +} + +static inline struct resource_table * +tee_rproc_find_loaded_rsc_table(struct rproc *rproc, const struct firmware *fw) +{ + /* This shouldn't be possible */ + WARN_ON(1); + + return NULL; +} +#endif /* CONFIG_TEE_REMOTEPROC */ +#endif /* TEE_REMOTEPROC_H */
Add a remoteproc TEE (Trusted Execution Environment) driver that will be probed by the TEE bus. If the associated Trusted application is supported on secure part this driver offers a client interface to load a firmware in the secure part. This firmware could be authenticated by the secure trusted application. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> --- update from V - Fix missing "{" in tee_rproc_find_loaded_rsc_table inline definition. update from V5 - make tee_rproc_get_loaded_rsc_table() local and replace this API by tee_rproc_find_loaded_rsc_table() - map and unmap the resource table in tee_rproc_parse_fw to make a cached copy - use the new rproc_pa_to_va() API to map the resource table memory declared in carevout - remove tee_rproc_release_loaded_rsc_table as no more used. --- drivers/remoteproc/Kconfig | 10 + drivers/remoteproc/Makefile | 1 + drivers/remoteproc/tee_remoteproc.c | 451 ++++++++++++++++++++++++++++ include/linux/remoteproc.h | 4 + include/linux/tee_remoteproc.h | 100 ++++++ 5 files changed, 566 insertions(+) create mode 100644 drivers/remoteproc/tee_remoteproc.c create mode 100644 include/linux/tee_remoteproc.h