@@ -47,6 +47,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8974pro-oneplus-bacon.dtb \
qcom-msm8974pro-samsung-klte.dtb \
qcom-msm8974pro-samsung-kltechn.dtb \
+ qcom-msm8974pro-sony-xperia-shinano-aries.dtb \
qcom-msm8974pro-sony-xperia-shinano-castor.dtb \
qcom-msm8974pro-sony-xperia-shinano-leo.dtb \
qcom-mdm9615-wp8548-mangoh-green.dtb \
new file mode 100644
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi"
+
+/ {
+ model = "Sony Xperia Z3 Compact";
+ compatible = "sony,xperia-aries", "qcom,msm8974pro", "qcom,msm8974";
+ chassis-type = "handset";
+
+ gpio-keys {
+ key-camera-snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_CAMERA>;
+ debounce-interval = <15>;
+ };
+
+ key-camera-focus {
+ label = "camera_focus";
+ gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ debounce-interval = <15>;
+ };
+ };
+};
+
+&gpio_keys_pin_a {
+ pins = "gpio2", "gpio3", "gpio4", "gpio5";
+};
+
+&smbb {
+ usb-charge-current-limit = <1500000>;
+ qcom,fast-charge-safe-current = <2100000>;
+ qcom,fast-charge-current-limit = <1800000>;
+ qcom,fast-charge-safe-voltage = <4400000>;
+ qcom,fast-charge-high-threshold-voltage = <4350000>;
+ qcom,auto-recharge-threshold-voltage = <4280000>;
+ qcom,minimum-input-voltage = <4200000>;
+
+ status = "okay";
+};
+
+&synaptics_touchscreen {
+ vio-supply = <&pm8941_s3>;
+};
Add the dts for the Z3 Compact. This is currently almost the same as the plain Z3 as they share almost the same hardware and nothing device-specific is currently supported. Signed-off-by: Valeriy Klimin <vdos63@gmail.com> --- arch/arm/boot/dts/qcom/Makefile | 1 + .../qcom-msm8974pro-sony-xperia-shinano-aries.dts | 44 ++++++++++++++++++++++ 2 files changed, 45 insertions(+)