diff mbox series

[06/15] net: hbl_cn: debugfs support

Message ID 20240613082208.1439968-7-oshpigelman@habana.ai (mailing list archive)
State Changes Requested
Headers show
Series Introduce HabanaLabs network drivers | expand

Commit Message

Omer Shpigelman June 13, 2024, 8:21 a.m. UTC
Add debugfs files for advanced settings, debug options and testing.

Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Co-developed-by: Abhilash K V <kvabhilash@habana.ai>
Signed-off-by: Abhilash K V <kvabhilash@habana.ai>
Co-developed-by: Andrey Agranovich <aagranovich@habana.ai>
Signed-off-by: Andrey Agranovich <aagranovich@habana.ai>
Co-developed-by: Bharat Jauhari <bjauhari@habana.ai>
Signed-off-by: Bharat Jauhari <bjauhari@habana.ai>
Co-developed-by: David Meriin <dmeriin@habana.ai>
Signed-off-by: David Meriin <dmeriin@habana.ai>
Co-developed-by: Sagiv Ozeri <sozeri@habana.ai>
Signed-off-by: Sagiv Ozeri <sozeri@habana.ai>
Co-developed-by: Zvika Yehudai <zyehudai@habana.ai>
Signed-off-by: Zvika Yehudai <zyehudai@habana.ai>
---
 .../ABI/testing/debugfs-driver-habanalabs_cn  |  195 +++
 MAINTAINERS                                   |    1 +
 drivers/net/ethernet/intel/hbl_cn/Makefile    |    2 +
 .../net/ethernet/intel/hbl_cn/common/hbl_cn.c |    4 +
 .../net/ethernet/intel/hbl_cn/common/hbl_cn.h |   37 +
 .../intel/hbl_cn/common/hbl_cn_debugfs.c      | 1457 +++++++++++++++++
 .../ethernet/intel/hbl_cn/common/hbl_cn_drv.c |   19 +-
 7 files changed, 1714 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/ABI/testing/debugfs-driver-habanalabs_cn
 create mode 100644 drivers/net/ethernet/intel/hbl_cn/common/hbl_cn_debugfs.c

Comments

Sunil Kovvuri Goutham June 19, 2024, 6:35 p.m. UTC | #1
>+
>+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_disable_decap
>+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_inject_rx_err
>+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_mac_lane_remap

Don't think debugfs is the correct interface for all this configuration.
Debugfs should ideally be used for dumping runtime device state info for debug purposes.

>+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_mac_loopback

Why not use ethtool ?

>+
>+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_mmu_bypass

How does this work ?

Thanks,
Sunil.
Omer Shpigelman June 21, 2024, 10:17 a.m. UTC | #2
On 6/19/24 21:35, Sunil Kovvuri Goutham wrote:
> [Some people who received this message don't often get email from sgoutham@marvell.com. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
> 
>> +
>> +What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_disable_decap
>> +What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_inject_rx_err
>> +What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_mac_lane_remap
> 
> Don't think debugfs is the correct interface for all this configuration.
> Debugfs should ideally be used for dumping runtime device state info for debug purposes.
> 

I see other vendors have debugfs entries for debug configurations or
settings, not just for dumping debug info.

>> +What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_mac_loopback
> 
> Why not use ethtool ?
>

We have an ethtool option for that, but we have also internal NIC ports
that are not exposed as netdevices and for them the ethtool path is
irrelevant. Hence we need this debugfs option as well.
 
>> +
>> +What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_mmu_bypass
> 
> How does this work ?
> 

When this option is enabled the RDMA data buffers the user allocated on the
host memory are being accessed directly i.e. without MMU.
But now after you brought this up I see that it is not fully supported
anymore so I'll remove in the next version.

> Thanks,
> Sunil.
Sunil Kovvuri Goutham June 21, 2024, 10:30 a.m. UTC | #3
>>> +
>>> +What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_disable_decap
>>> +What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_inject_rx_err
>>> +What:
>/sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_mac_lane_remap
>>
>> Don't think debugfs is the correct interface for all this configuration.
>> Debugfs should ideally be used for dumping runtime device state info for debug
>purposes.
>>
>
>I see other vendors have debugfs entries for debug configurations or settings, not
>just for dumping debug info.
>

But disable_decap / mac_lane_remap seems configuration related which changes the way pkts are processed not debug.
Configurations are supported via devlink.

Thanks,
Sunil.
Andrew Lunn June 21, 2024, 3:33 p.m. UTC | #4
> I see other vendors have debugfs entries for debug configurations or
> settings, not just for dumping debug info.

Did you see any added in the last few years? This is also something
DaveM pushed back on. We want uniform APIs so that all devices look
alike. Please consider what you are exporting here, how it should
cleanly fit into ethtool, devlink, etc, and expand these APIs to cover
your needs.

> 
> >> +What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_mac_loopback
> > 
> > Why not use ethtool ?
> >
> 
> We have an ethtool option for that, but we have also internal NIC ports
> that are not exposed as netdevices and for them the ethtool path is
> irrelevant. Hence we need this debugfs option as well.

If there is no netdev, what is the point of putting it into loopback?
How do you send packets which are to be looped back? How do you
receive them to see if they were actually looped back?

	Andrew
Omer Shpigelman June 23, 2024, 6:57 a.m. UTC | #5
On 6/21/24 18:33, Andrew Lunn wrote:
>> I see other vendors have debugfs entries for debug configurations or
>> settings, not just for dumping debug info.
> 
> Did you see any added in the last few years? This is also something
> DaveM pushed back on. We want uniform APIs so that all devices look
> alike. Please consider what you are exporting here, how it should
> cleanly fit into ethtool, devlink, etc, and expand these APIs to cover
> your needs.
> 

If it's problematic then I'll try to stick to the ones which expose debug
info and maybe some other necessary debug options e.g. loopback. I'll try
to minimize by removing anything that is not mandatory.

>>
>>>> +What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_mac_loopback
>>>
>>> Why not use ethtool ?
>>>
>>
>> We have an ethtool option for that, but we have also internal NIC ports
>> that are not exposed as netdevices and for them the ethtool path is
>> irrelevant. Hence we need this debugfs option as well.
> 
> If there is no netdev, what is the point of putting it into loopback?
> How do you send packets which are to be looped back? How do you
> receive them to see if they were actually looped back?
> 
> 	Andrew

To run RDMA test in loopback. That's how we can pinpoint problems like
packet drops or performance degradation. For example, if packet drops were
seen on the port then it is crucial to know if these drops are
reproducible in loopback mode. If they are, then the root cause is
probably some internal HW failure or misconfiguration. If not, then the
packet drops might be related to the link quality.
We send these packets by setting a loopback bypass in the MAC layer. The
packets themselves and the NIC HW logic are agnostic to the loopback
setting (except of the packet's MAC address).
We receive and validate them and in the same way we receive and validate
regular packets - the loopback bypass is in the MAC layer which is in a
lower layer than our NIC HW logic.
Omer Shpigelman June 23, 2024, 7:25 a.m. UTC | #6
On 6/21/24 13:30, Sunil Kovvuri Goutham wrote:
>>>> +
>>>> +What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_disable_decap
>>>> +What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_inject_rx_err
>>>> +What:
>> /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_mac_lane_remap
>>>
>>> Don't think debugfs is the correct interface for all this configuration.
>>> Debugfs should ideally be used for dumping runtime device state info for debug
>> purposes.
>>>
>>
>> I see other vendors have debugfs entries for debug configurations or settings, not
>> just for dumping debug info.
>>
> 
> But disable_decap / mac_lane_remap seems configuration related which changes the way pkts are processed not debug.
> Configurations are supported via devlink.
> 

As I wrote to Andrew, I'll stick to the debugfs entries that are really
necessary for us.
BTW the entries you mentioned are not regular configurations but advanced
settings to augment debuggability. But yeah, if we can set these via
devlink then it is better to use it.
Let me revisit this for the next patch set version.

> Thanks,
> Sunil.
Andrew Lunn June 23, 2024, 3:02 p.m. UTC | #7
> > If there is no netdev, what is the point of putting it into loopback?
> > How do you send packets which are to be looped back? How do you
> > receive them to see if they were actually looped back?
> > 
> > 	Andrew
> 
> To run RDMA test in loopback.

What is special about your RDMA? Why do you need something which other
vendors don't? Please solve this problem for all RDMA devices, not
yours.

This all part of the same thing with respect to module
parameters. Vendors would add module parameters for something. Other
vendors would have the same concept, but give it a different name,
different values. It was all poorly documented. You had to read the
kernel sources to figure out what kernel module parameters do. Same
goes for debugfs, driver values in /proc, /sysfs or /debugfs. So for
years we have been pushing back on things like this.

If you have something which is unique to your hardware, no other
vendor is ever going to have the same, then you can make an argument
for something driver specific in /debugfs. But RDMA loopback tests is
clearly not specific to your driver. Extend the KAPI and tools to
cover this, document the KAPI, write the man page, and let other
vendors implement the little bit they need in their driver, so users
have a uniform way of doing things over a rather of devices.

You will get a lot of pushback on everything in /debugfs, so please
review them all with this in mind.

       Andrew
Omer Shpigelman June 24, 2024, 7:21 a.m. UTC | #8
On 6/23/24 18:02, Andrew Lunn wrote:
>>> If there is no netdev, what is the point of putting it into loopback?
>>> How do you send packets which are to be looped back? How do you
>>> receive them to see if they were actually looped back?
>>>
>>> 	Andrew
>>
>> To run RDMA test in loopback.
> 
> What is special about your RDMA? Why do you need something which other
> vendors don't? Please solve this problem for all RDMA devices, not
> yours.
> 
> This all part of the same thing with respect to module
> parameters. Vendors would add module parameters for something. Other
> vendors would have the same concept, but give it a different name,
> different values. It was all poorly documented. You had to read the
> kernel sources to figure out what kernel module parameters do. Same
> goes for debugfs, driver values in /proc, /sysfs or /debugfs. So for
> years we have been pushing back on things like this.
> 
> If you have something which is unique to your hardware, no other
> vendor is ever going to have the same, then you can make an argument
> for something driver specific in /debugfs. But RDMA loopback tests is
> clearly not specific to your driver. Extend the KAPI and tools to
> cover this, document the KAPI, write the man page, and let other
> vendors implement the little bit they need in their driver, so users
> have a uniform way of doing things over a rather of devices.
> 
> You will get a lot of pushback on everything in /debugfs, so please
> review them all with this in mind.
> 
>        Andrew

I see your point and I'll keep that in mind. For these kinds of
configurations we can use devlink instead of debugfs.
Leon Romanovsky June 24, 2024, 9:22 a.m. UTC | #9
On Sun, Jun 23, 2024 at 05:02:44PM +0200, Andrew Lunn wrote:
> > > If there is no netdev, what is the point of putting it into loopback?
> > > How do you send packets which are to be looped back? How do you
> > > receive them to see if they were actually looped back?
> > > 
> > > 	Andrew
> > 
> > To run RDMA test in loopback.
> 
> What is special about your RDMA? Why do you need something which other
> vendors don't? Please solve this problem for all RDMA devices, not
> yours.

I'm not aware of anything special here, which require special treatment.
All RDMA devices support loopback natively and can "put" traffic from
their TX directly to their RX. This is how we can run RDMA tests, which
are part of rdma-core https://github.com/linux-rdma/rdma-core/tree/master/tests.

Thanks
diff mbox series

Patch

diff --git a/Documentation/ABI/testing/debugfs-driver-habanalabs_cn b/Documentation/ABI/testing/debugfs-driver-habanalabs_cn
new file mode 100644
index 000000000000..5de689b0986d
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-driver-habanalabs_cn
@@ -0,0 +1,195 @@ 
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_accumulate_fec_duration
+Date:           May 2024
+KernelVersion:  N/A
+Contact:        kvabhilash@habana.ai
+Description:    Time (in ms) to accumulate FEC errors for. This is used as
+                divisor in calculation of pre & post FEC (Forward Error
+                Correction) SER (Symbol Error Rate).
+                Valid values are from 1 to ACCUMULATE_FEC_STATS_DURATION_MS_MAX.
+                Default value is ACCUMULATE_FEC_STATS_DURATION_MS.
+                Usage: echo <time_ms> > nic_accumulate_fec_duration
+                cat nic_accumulate_fec_duration
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_disable_decap
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        gkgurumurthy@habana.ai
+Description:    Allows the root user to enable/disable the decapsulation logic
+                on the RX path.
+                '1' disables the logic, '0' enables the logic.
+                The typical use case is to disable the decap on rx with encap
+                enabled on the tx, and run the RDMA traffic. This causes the
+                packets to be forwarded to ethernet ring which is ultimately
+                sent to linux kernel. The user can analyze the RDMA packet using
+                tcpdump and validate the encapsulation header.
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_inject_rx_err
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        akishore@habana.ai
+Description:    Allows the root user to force RX packet drop.
+                Usage: echo <drop_percent> > nic_inject_rx_err
+                       cat nic_inject_rx_err
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_mac_lane_remap
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        akishore@habana.ai
+Description:    Allows root user to change MAC to PHY lane mapping. User should
+                provide space separated bitmap for all lanes on all NIC macros.
+                Usage: echo macro0 macro1 macro2 ... macroX > nic_mac_lane_remap
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_mac_loopback
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        oshpigelman@habana.ai
+Description:    Allows the root user to disable/enable MAC loopback for each NIC
+                port. The ports will function as if a physical loopback
+                transceiver was connected. A bitmask should be provided where
+                each bit represents a port.
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_mmu_bypass
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        zyehudai@habana.ai
+Description:    Sets the NIC to use MMU bypass for its allocated data structure.
+                Value of "0" is for disable, otherwise enable.
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_nrz_tx_taps
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        sozeri@habana.ai
+Description:    Allows the root user to set and show the NRZ Tx taps for the
+                port lanes. The lanes indices are 0-47.
+                Acceptable input string form:
+                <lane> <tx_pre2> <tx_pre1> <tx_main> <tx_post1> <tx_post2>.
+                cat nic_nrz_tx_taps will dump all taps.
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_override_port_status
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        aagranovich@habana.ai
+Description:    Allows the root user to force set ports link status.
+                Usage: echo <port> <status> > nic_override_port_status
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_pam4_tx_taps
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        oshpigelman@habana.ai
+Description:    Allows the root user to set and show the PAM4 Tx taps for the
+                port lanes. The lanes indices are 0-47.
+                Acceptable input string form:
+                <lane> <tx_pre2> <tx_pre1> <tx_main> <tx_post1> <tx_post2>.
+                cat nic_pam4_tx_taps will dump all taps.
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_phy_calc_ber
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        sozeri@habana.ai
+Description:    Allows the root user to enable calculation of PHY BER during the
+                PHY power_up flow.
+                value "0" is for disable, otherwise enable.
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_phy_calc_ber_wait_sec
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        sozeri@habana.ai
+Description:    Allows the root user to set the waiting time in seconds before
+                BER calculating.
+                Usage: echo <time_in_seconds> > nic_phy_calc_ber_wait_sec
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_phy_dump_serdes_params
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        sozeri@habana.ai
+Description:    Allows the root user to dump serdes parameters for a given port.
+                Need to write the port and then read it in order to dump the
+                parameters.
+                Usage: echo <port> > nic_phy_dump_serdes_params
+                       cat nic_phy_dump_serdes_params
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_phy_force_first_tx_taps_cfg
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        sozeri@habana.ai
+Description:    Allows the root user to determine that every PHY power-up will
+                set the first Tx taps cfg instead of the current one.
+                Usage: echo 1 > nic_phy_force_first_tx_taps_cfg
+                cat nic_phy_force_first_tx_taps_cfg
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_phy_regs_print
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        sozeri@habana.ai
+Description:    Allows the root user to dump all PHY registers reads/writes
+                during the PHY power_up flow.
+                value "0" is for disable, otherwise enable.
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_phy_set_nrz
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        sozeri@habana.ai
+Description:    Allows the root user to set/unset NRZ mode (25Gbps speed).
+                Usage: echo 0/1 > nic_phy_set_nrz
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_polarity
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        oshpigelman@habana.ai
+Description:    Allows the root user to set the polarity for the port lanes.
+                The lanes indices are 0-47.
+                Acceptable input string form: <lane> <pol_tx> <pol_rx>.
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_print_fec_stats
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        sozeri@habana.ai
+Description:    Allows the root user to dump the FEC stats for all NIC ports to
+                dmesg.
+                Usage: cat nic_print_fec_stats
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_qp
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        oshpigelman@habana.ai
+Description:    Read a QP (Queue Pair) HW structure content. Need to write the
+                QP number, port, type and other flags to the file and then read
+                it in order to dump the QP content.
+                Input form: <port> <qpn> <is_req> <is_full_print> <force_read>.
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_rand_status
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        oshpigelman@habana.ai
+Description:    Enable randomization for the values returned in the NIC status
+                packet. Value of "0" is for disable, otherwise enable.
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_reset_cnt
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        oshpigelman@habana.ai
+Description:    Resets nic counters. Any decimal value is a valid input.
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_show_internal_ports_status
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        sozeri@habana.ai
+Description:    Allows the root user to read the link status of all internal
+                NIC ports.
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_wqe
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        zyehudai@habana.ai
+Description:    Read a WQE (Work Queue Entry) HW structure content. Need to
+                write the port, QP number, WQE index and it's type to the file
+                and then read it in order to dump the WQE content.
+                Input form: <port> <qpn> <wqe_idx> <is_tx>.
+
+What:           /sys/kernel/debug/habanalabs_cn/hbl_cn<n>/nic_wqe_index_checker
+Date:           May 2024
+KernelVersion:  6.9
+Contact:        dmeriin@habana.ai
+Description:    Allows the root user to enable/disable the WQE index checker.
+                value "0" is for disable, otherwise enable.
+                Usage: echo <enable> > nic_wqe_index_checker
diff --git a/MAINTAINERS b/MAINTAINERS
index e948e33e990d..906224204aba 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9610,6 +9610,7 @@  L:	netdev@vger.kernel.org
 L:	linux-rdma@vger.kernel.org
 S:	Supported
 W:	https://www.habana.ai
+F:	Documentation/ABI/testing/debugfs-driver-habanalabs_cn
 F:	Documentation/networking/device_drivers/ethernet/intel/hbl.rst
 F:	drivers/net/ethernet/intel/hbl_cn/
 F:	include/linux/habanalabs/
diff --git a/drivers/net/ethernet/intel/hbl_cn/Makefile b/drivers/net/ethernet/intel/hbl_cn/Makefile
index 84ee2a6d7c3b..c2c4142f18a0 100644
--- a/drivers/net/ethernet/intel/hbl_cn/Makefile
+++ b/drivers/net/ethernet/intel/hbl_cn/Makefile
@@ -7,3 +7,5 @@  obj-$(CONFIG_HABANA_CN) := habanalabs_cn.o
 
 include $(src)/common/Makefile
 habanalabs_cn-y += $(HBL_CN_COMMON_FILES)
+
+habanalabs_cn-$(CONFIG_DEBUG_FS) += common/hbl_cn_debugfs.o
diff --git a/drivers/net/ethernet/intel/hbl_cn/common/hbl_cn.c b/drivers/net/ethernet/intel/hbl_cn/common/hbl_cn.c
index 4e910b2cb8ac..fc7bd6474404 100644
--- a/drivers/net/ethernet/intel/hbl_cn/common/hbl_cn.c
+++ b/drivers/net/ethernet/intel/hbl_cn/common/hbl_cn.c
@@ -1842,6 +1842,8 @@  int hbl_cn_dev_init(struct hbl_cn_device *hdev)
 
 	hbl_cn_late_init(hdev);
 
+	hbl_cn_debugfs_dev_init(hdev);
+
 	hdev->is_initialized = true;
 
 	return 0;
@@ -1878,6 +1880,8 @@  void hbl_cn_dev_fini(struct hbl_cn_device *hdev)
 		hbl_cn_stop(hdev->cn_aux_dev);
 	}
 
+	hbl_cn_debugfs_dev_fini(hdev);
+
 	hbl_cn_late_fini(hdev);
 
 	hbl_cn_ib_aux_drv_fini(hdev);
diff --git a/drivers/net/ethernet/intel/hbl_cn/common/hbl_cn.h b/drivers/net/ethernet/intel/hbl_cn/common/hbl_cn.h
index 27139e93d990..0b96cd3db719 100644
--- a/drivers/net/ethernet/intel/hbl_cn/common/hbl_cn.h
+++ b/drivers/net/ethernet/intel/hbl_cn/common/hbl_cn.h
@@ -142,6 +142,34 @@ 
 #define hbl_cn_dma_pool_free(hdev, vaddr, dma_addr) \
 	__hbl_cn_dma_pool_free(hdev, vaddr, dma_addr, __func__)
 
+/* CN debugfs files enum */
+enum hbl_cn_debugfs_files_idx {
+	NIC_MAC_LOOPBACK = 0,
+	NIC_PAM4_TX_TAPS,
+	NIC_NRZ_TX_TAPS,
+	NIC_POLARITY,
+	NIC_QP,
+	NIC_WQE,
+	NIC_RESET_CNT,
+	NIC_MAC_LANE_REMAP,
+	NIC_RAND_STATUS,
+	NIC_MMU_BYPASS,
+	NIC_ETH_LOOPBACK,
+	NIC_PHY_REGS_PRINT,
+	NIC_SHOW_INTERNAL_PORTS_STATUS,
+	NIC_PRINT_FEC_STATS,
+	NIC_DISABLE_DECAP,
+	NIC_PHY_SET_NRZ,
+	NIC_PHY_DUMP_SERDES_PARAMS,
+	NIC_INJECT_RX_ERR,
+	NIC_PHY_CALC_BER,
+	NIC_PHY_CALC_BER_WAIT_SEC,
+	NIC_OVERRIDE_PORT_STATUS,
+	NIC_WQE_INDEX_CHECKER,
+	NIC_ACCUMULATE_FEC_DURATION,
+	NIC_PHY_FORCE_FIRST_TX_TAPS_CFG,
+};
+
 extern struct hbl_cn_stat hbl_cn_mac_fec_stats[];
 extern struct hbl_cn_stat hbl_cn_mac_stats_rx[];
 extern struct hbl_cn_stat hbl_cn_mac_stats_tx[];
@@ -1312,6 +1340,7 @@  struct hbl_cn_properties {
  * struct hbl_cn_device - habanalabs CN device structure.
  * @pdev: pointer to PCI device.
  * @dev: related kernel basic device structure.
+ * @cn_dentry: CN debugfs root dentry.
  * @cpucp_info: FW info.
  * @asic_funcs: ASIC specific functions that can be called from common code.
  * @phy_tx_taps: array that holds all PAM4 Tx taps of all lanes.
@@ -1341,6 +1370,7 @@  struct hbl_cn_properties {
  * @mac_loopback: enable MAC loopback on specific ports.
  * @dram_size: available DRAM size.
  * @mmap_type_flag: flag to indicate NIC MMAP type.
+ * @debugfs_supp_mask: mask of supported debugfs files.
  * @pol_tx_mask: bitmap of tx polarity for all lanes.
  * @pol_rx_mask: bitmap of rx polarity for all lanes.
  * @device_timeout: device access timeout in usec.
@@ -1411,6 +1441,7 @@  struct hbl_cn_properties {
 struct hbl_cn_device {
 	struct pci_dev *pdev;
 	struct device *dev;
+	struct dentry *cn_dentry;
 	struct hbl_cn_cpucp_info *cpucp_info;
 	struct hbl_cn_asic_funcs *asic_funcs;
 	struct hbl_cn_tx_taps *phy_tx_taps;
@@ -1441,6 +1472,7 @@  struct hbl_cn_device {
 	u64 mac_loopback;
 	u64 dram_size;
 	u64 mmap_type_flag;
+	u64 debugfs_supp_mask;
 	u64 pol_tx_mask;
 	u64 pol_rx_mask;
 	u32 device_timeout;
@@ -1534,6 +1566,8 @@  void hbl_cn_phy_set_port_status(struct hbl_cn_port *cn_port, bool up);
 int hbl_cn_read_spmu_counters(struct hbl_cn_port *cn_port, u64 out_data[], u32 *num_out_data);
 int hbl_cn_qp_modify(struct hbl_cn_port *cn_port, struct hbl_cn_qp *qp,
 		     enum hbl_cn_qp_state new_state, void *params);
+void hbl_cn_debugfs_dev_init(struct hbl_cn_device *hdev);
+void hbl_cn_debugfs_dev_fini(struct hbl_cn_device *hdev);
 u32 hbl_cn_get_max_qp_id(struct hbl_cn_port *cn_port);
 bool hbl_cn_is_port_open(struct hbl_cn_port *cn_port);
 u32 hbl_cn_get_pflags(struct hbl_cn_port *cn_port);
@@ -1614,6 +1648,9 @@  int __hbl_cn_ports_reopen(struct hbl_cn_device *hdev);
 void __hbl_cn_hard_reset_prepare(struct hbl_cn_device *hdev, bool fw_reset, bool in_teardown);
 void __hbl_cn_stop(struct hbl_cn_device *hdev);
 
+void __init hbl_cn_debugfs_init(void);
+void hbl_cn_debugfs_fini(void);
+
 /* DMA memory allocations */
 void *__hbl_cn_dma_alloc_coherent(struct hbl_cn_device *hdev, size_t size, dma_addr_t *dma_handle,
 				  gfp_t flag, const char *caller);
diff --git a/drivers/net/ethernet/intel/hbl_cn/common/hbl_cn_debugfs.c b/drivers/net/ethernet/intel/hbl_cn/common/hbl_cn_debugfs.c
new file mode 100644
index 000000000000..b13da28fdcb7
--- /dev/null
+++ b/drivers/net/ethernet/intel/hbl_cn/common/hbl_cn_debugfs.c
@@ -0,0 +1,1457 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright 2020-2024 HabanaLabs, Ltd.
+ * Copyright (C) 2023-2024, Intel Corporation.
+ * All Rights Reserved.
+ */
+
+#include "hbl_cn.h"
+
+#ifdef CONFIG_DEBUG_FS
+
+#include <linux/debugfs.h>
+#include <linux/module.h>
+#include <linux/nospec.h>
+
+#define POLARITY_KBUF_SIZE		8
+#define TX_TAPS_KBUF_SIZE		25
+#define KBUF_IN_SIZE			18
+#define KBUF_OUT_SIZE			BIT(12)
+#define KBUF_OUT_BIG_SIZE		BIT(14)
+#define MAC_LANE_REMAP_READ_SIZE	10
+#define MAX_INT_PORT_STS_KBUF_SIZE	20
+#define HBL_CN_DEBUGFS_CREATE_FILE(op, perm, dir, dev, fops) \
+	do { \
+		enum hbl_cn_debugfs_files_idx __op = op; \
+		if (hdev->debugfs_supp_mask & BIT(__op)) \
+			debugfs_create_file(hbl_cn_debugfs_names[__op], perm, dir, dev, fops); \
+	} while (0)
+
+#define HBL_CN_DEBUGFS_CREATE_U8(op, perm, dir, fops) \
+	do { \
+		enum hbl_cn_debugfs_files_idx __op = op; \
+		if (hdev->debugfs_supp_mask & BIT(__op)) \
+			debugfs_create_u8(hbl_cn_debugfs_names[__op], perm, dir, fops); \
+	} while (0)
+
+#define HBL_CN_DEBUGFS_CREATE_U16(op, perm, dir, fops) \
+	do { \
+		enum hbl_cn_debugfs_files_idx __op = op; \
+		if (hdev->debugfs_supp_mask & BIT(__op)) \
+			debugfs_create_u16(hbl_cn_debugfs_names[__op], perm, dir, fops); \
+	} while (0)
+
+static char hbl_cn_debugfs_names[][NAME_MAX] = {
+	[NIC_MAC_LOOPBACK] = "nic_mac_loopback",
+	[NIC_PAM4_TX_TAPS] = "nic_pam4_tx_taps",
+	[NIC_NRZ_TX_TAPS] = "nic_nrz_tx_taps",
+	[NIC_POLARITY] = "nic_polarity",
+	[NIC_QP] = "nic_qp",
+	[NIC_WQE] = "nic_wqe",
+	[NIC_RESET_CNT] = "nic_reset_cnt",
+	[NIC_MAC_LANE_REMAP] = "nic_mac_lane_remap",
+	[NIC_RAND_STATUS] = "nic_rand_status",
+	[NIC_MMU_BYPASS] = "nic_mmu_bypass",
+	[NIC_ETH_LOOPBACK] = "nic_eth_loopback",
+	[NIC_PHY_REGS_PRINT] = "nic_phy_regs_print",
+	[NIC_SHOW_INTERNAL_PORTS_STATUS] = "nic_show_internal_ports_status",
+	[NIC_PRINT_FEC_STATS] = "nic_print_fec_stats",
+	[NIC_DISABLE_DECAP] = "nic_disable_decap",
+	[NIC_PHY_SET_NRZ] = "nic_phy_set_nrz",
+	[NIC_PHY_DUMP_SERDES_PARAMS] = "nic_phy_dump_serdes_params",
+	[NIC_INJECT_RX_ERR] = "nic_inject_rx_err",
+	[NIC_PHY_CALC_BER] = "nic_phy_calc_ber",
+	[NIC_PHY_CALC_BER_WAIT_SEC] = "nic_phy_calc_ber_wait_sec",
+	[NIC_OVERRIDE_PORT_STATUS] = "nic_override_port_status",
+	[NIC_WQE_INDEX_CHECKER] = "nic_wqe_index_checker",
+	[NIC_ACCUMULATE_FEC_DURATION] = "nic_accumulate_fec_duration",
+	[NIC_PHY_FORCE_FIRST_TX_TAPS_CFG] = "nic_phy_force_first_tx_taps_cfg",
+};
+
+static struct dentry *hbl_cn_debug_root;
+
+static int hbl_device_hard_reset_sync(struct hbl_cn_device *hdev)
+{
+	struct hbl_cn_aux_ops *aux_ops;
+	struct hbl_aux_dev *aux_dev;
+	ktime_t timeout;
+
+	aux_dev = hdev->cn_aux_dev;
+	aux_ops = aux_dev->aux_ops;
+
+	aux_ops->device_reset(aux_dev);
+
+	timeout = ktime_add_ms(ktime_get(), hdev->pending_reset_long_timeout * 1000ull);
+	while (!hbl_cn_comp_device_operational(hdev) && !READ_ONCE(hdev->in_teardown)) {
+		ssleep(1);
+		if (ktime_compare(ktime_get(), timeout) > 0) {
+			dev_crit(hdev->dev, "Timed out waiting for hard reset to finish\n");
+			return -ETIMEDOUT;
+		}
+	}
+
+	return 0;
+}
+
+static ssize_t debugfs_print_value_to_buffer(void *buf, size_t count, loff_t *ppos, char *fmt,
+					     u32 val)
+{
+	size_t fmt_len = strlen(fmt);
+	char tmp_fmt[32] = {0};
+	char tmp[32] = {0};
+
+	if (*ppos)
+		return 0;
+
+	if (fmt_len > sizeof(tmp_fmt) - 2)
+		return -ENOMEM;
+
+	strscpy(tmp_fmt, fmt, sizeof(tmp_fmt));
+
+	tmp_fmt[fmt_len] = '\n';
+	tmp_fmt[fmt_len + 1] = '\0';
+
+	snprintf(tmp, sizeof(tmp), tmp_fmt, val);
+
+	return simple_read_from_buffer(buf, count, ppos, tmp, strlen(tmp) + 1);
+}
+
+static ssize_t debugfs_pam4_tx_taps_write(struct file *f, const char __user *buf, size_t count,
+					  loff_t *ppos)
+{
+	s32 tx_pre2, tx_pre1, tx_main, tx_post1, tx_post2, *taps;
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	char kbuf[TX_TAPS_KBUF_SIZE] = {0};
+	u32 lane, max_num_of_lanes;
+	char *c1, *c2;
+	ssize_t rc;
+
+	max_num_of_lanes = hdev->cn_props.max_num_of_lanes;
+
+	if (count > sizeof(kbuf) - 1)
+		goto err;
+	if (copy_from_user(kbuf, buf, count))
+		goto err;
+	kbuf[count] = '\0';
+
+	c1 = kbuf;
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtou32(c1, 10, &lane);
+	if (rc)
+		goto err;
+
+	if (lane >= max_num_of_lanes) {
+		dev_err(hdev->dev, "lane max value is %d\n", max_num_of_lanes - 1);
+		return -EINVAL;
+	}
+
+	/* Turn off speculation due to Spectre vulnerability */
+	lane = array_index_nospec(lane, max_num_of_lanes);
+
+	c1 = c2 + 1;
+
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtos32(c1, 10, &tx_pre2);
+	if (rc)
+		goto err;
+
+	c1 = c2 + 1;
+
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtos32(c1, 10, &tx_pre1);
+	if (rc)
+		goto err;
+
+	c1 = c2 + 1;
+
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtos32(c1, 10, &tx_main);
+	if (rc)
+		goto err;
+
+	c1 = c2 + 1;
+
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtos32(c1, 10, &tx_post1);
+	if (rc)
+		goto err;
+
+	c1 = c2 + 1;
+
+	rc = kstrtos32(c1, 10, &tx_post2);
+	if (rc)
+		goto err;
+
+	taps = hdev->phy_tx_taps[lane].pam4_taps;
+	taps[0] = tx_pre2;
+	taps[1] = tx_pre1;
+	taps[2] = tx_main;
+	taps[3] = tx_post1;
+	taps[4] = tx_post2;
+
+	return count;
+err:
+	dev_err(hdev->dev,
+		"usage: echo <lane> <tx_pre2> <tx_pre1> <tx_main> <tx_post1> <tx_post2> > nic_pam4_tx_taps\n");
+
+	return -EINVAL;
+}
+
+static ssize_t debugfs_pam4_tx_taps_read(struct file *f, char __user *buf, size_t count,
+					 loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	u32 lane, max_num_of_lanes;
+	ssize_t rc, len;
+	char *kbuf;
+	s32 *taps;
+
+	max_num_of_lanes = hdev->cn_props.max_num_of_lanes;
+
+	if (*ppos)
+		return 0;
+
+	kbuf = kzalloc(KBUF_OUT_SIZE, GFP_KERNEL);
+	if (!kbuf)
+		return -ENOMEM;
+
+	sprintf(kbuf + strlen(kbuf), "PAM4 tx taps:\n");
+
+	for (lane = 0; lane < max_num_of_lanes; lane++) {
+		taps = hdev->phy_tx_taps[lane].pam4_taps;
+		len = strlen(kbuf);
+		if ((KBUF_OUT_SIZE - len) <= 1) {
+			rc = -EFBIG;
+			goto out;
+		}
+		snprintf(kbuf + len, KBUF_OUT_SIZE - len, "lane %u: %d %d %d %d %d\n", lane,
+			 taps[0], taps[1], taps[2], taps[3], taps[4]);
+	}
+
+	rc = simple_read_from_buffer(buf, count, ppos, kbuf, strlen(kbuf) + 1);
+
+out:
+	kfree(kbuf);
+
+	return rc;
+}
+
+static const struct file_operations debugfs_pam4_tx_taps_fops = {
+	.owner = THIS_MODULE,
+	.write = debugfs_pam4_tx_taps_write,
+	.read = debugfs_pam4_tx_taps_read,
+};
+
+static ssize_t debugfs_nrz_tx_taps_write(struct file *f, const char __user *buf, size_t count,
+					 loff_t *ppos)
+{
+	s32 tx_pre2, tx_pre1, tx_main, tx_post1, tx_post2, *taps;
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	char kbuf[TX_TAPS_KBUF_SIZE] = {0};
+	u32 lane, max_num_of_lanes;
+	char *c1, *c2;
+	ssize_t rc;
+
+	max_num_of_lanes = hdev->cn_props.max_num_of_lanes;
+
+	if (count > sizeof(kbuf) - 1)
+		goto err;
+	if (copy_from_user(kbuf, buf, count))
+		goto err;
+	kbuf[count] = '\0';
+
+	c1 = kbuf;
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtou32(c1, 10, &lane);
+	if (rc)
+		goto err;
+
+	if (lane >= max_num_of_lanes) {
+		dev_err(hdev->dev, "lane max value is %d\n", max_num_of_lanes - 1);
+		return -EINVAL;
+	}
+
+	/* Turn off speculation due to Spectre vulnerability */
+	lane = array_index_nospec(lane, max_num_of_lanes);
+
+	c1 = c2 + 1;
+
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtos32(c1, 10, &tx_pre2);
+	if (rc)
+		goto err;
+
+	c1 = c2 + 1;
+
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtos32(c1, 10, &tx_pre1);
+	if (rc)
+		goto err;
+
+	c1 = c2 + 1;
+
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtos32(c1, 10, &tx_main);
+	if (rc)
+		goto err;
+
+	c1 = c2 + 1;
+
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtos32(c1, 10, &tx_post1);
+	if (rc)
+		goto err;
+
+	c1 = c2 + 1;
+
+	rc = kstrtos32(c1, 10, &tx_post2);
+	if (rc)
+		goto err;
+
+	taps = hdev->phy_tx_taps[lane].nrz_taps;
+	taps[0] = tx_pre2;
+	taps[1] = tx_pre1;
+	taps[2] = tx_main;
+	taps[3] = tx_post1;
+	taps[4] = tx_post2;
+
+	return count;
+err:
+	dev_err(hdev->dev,
+		"usage: echo <lane> <tx_pre2> <tx_pre1> <tx_main> <tx_post1> <tx_post2> > nic_nrz_tx_taps\n");
+
+	return -EINVAL;
+}
+
+static ssize_t debugfs_nrz_tx_taps_read(struct file *f, char __user *buf, size_t count,
+					loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	u32 lane, max_num_of_lanes;
+	ssize_t rc, len;
+	char *kbuf;
+	s32 *taps;
+
+	max_num_of_lanes = hdev->cn_props.max_num_of_lanes;
+
+	if (*ppos)
+		return 0;
+
+	kbuf = kzalloc(KBUF_OUT_SIZE, GFP_KERNEL);
+	if (!kbuf)
+		return -ENOMEM;
+
+	sprintf(kbuf + strlen(kbuf), "NRZ tx taps:\n");
+
+	for (lane = 0; lane < max_num_of_lanes; lane++) {
+		taps = hdev->phy_tx_taps[lane].nrz_taps;
+		len = strlen(kbuf);
+		if ((KBUF_OUT_SIZE - len) <= 1) {
+			rc = -EFBIG;
+			goto out;
+		}
+		snprintf(kbuf + len, KBUF_OUT_SIZE - len, "lane %u: %d %d %d %d %d\n", lane,
+			 taps[0], taps[1], taps[2], taps[3], taps[4]);
+	}
+
+	rc = simple_read_from_buffer(buf, count, ppos, kbuf, strlen(kbuf) + 1);
+
+out:
+	kfree(kbuf);
+
+	return rc;
+}
+
+static const struct file_operations debugfs_nrz_tx_taps_fops = {
+	.owner = THIS_MODULE,
+	.write = debugfs_nrz_tx_taps_write,
+	.read = debugfs_nrz_tx_taps_read,
+};
+
+static ssize_t debugfs_polarity_write(struct file *f, const char __user *buf, size_t count,
+				      loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	char kbuf[POLARITY_KBUF_SIZE] = {0};
+	u32 lane, max_num_of_lanes;
+	u8 pol_tx, pol_rx;
+	char *c1, *c2;
+	ssize_t rc;
+	u64 val;
+
+	max_num_of_lanes = hdev->cn_props.max_num_of_lanes;
+
+	if (count > sizeof(kbuf) - 1)
+		goto err;
+	if (copy_from_user(kbuf, buf, count))
+		goto err;
+	kbuf[count] = '\0';
+
+	c1 = kbuf;
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtou32(c1, 10, &lane);
+	if (rc)
+		goto err;
+
+	if (lane >= max_num_of_lanes) {
+		dev_err(hdev->dev, "lane max value is %d\n", max_num_of_lanes - 1);
+		return -EINVAL;
+	}
+
+	c1 = c2 + 1;
+
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtou8(c1, 10, &pol_tx);
+	if (rc)
+		goto err;
+
+	c1 = c2 + 1;
+
+	rc = kstrtou8(c1, 10, &pol_rx);
+	if (rc)
+		goto err;
+
+	if ((pol_tx & ~1) || (pol_rx & ~1)) {
+		dev_err(hdev->dev, "pol_tx and pol_rx should be 0 or 1\n");
+		goto err;
+	}
+
+	val = hdev->pol_tx_mask;
+	val &= ~BIT_ULL(lane);
+	val |= ((u64)pol_tx) << lane;
+	hdev->pol_tx_mask = val;
+
+	val = hdev->pol_rx_mask;
+	val &= ~BIT_ULL(lane);
+	val |= ((u64)pol_rx) << lane;
+	hdev->pol_rx_mask = val;
+
+	/* This flag is set to prevent overwriting the new values after reset */
+	hdev->skip_phy_pol_cfg = true;
+
+	return count;
+err:
+	dev_err(hdev->dev, "usage: echo <lane> <pol_tx> <pol_rx> > nic_polarity\n");
+
+	return -EINVAL;
+}
+
+static const struct file_operations debugfs_polarity_fops = {
+	.owner = THIS_MODULE,
+	.write = debugfs_polarity_write,
+};
+
+static ssize_t debugfs_qp_read(struct file *f, char __user *buf, size_t count, loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	struct hbl_cn_asic_funcs *asic_funcs;
+	char *kbuf;
+	ssize_t rc;
+
+	asic_funcs = hdev->asic_funcs;
+
+	if (*ppos)
+		return 0;
+
+	kbuf = kzalloc(KBUF_OUT_SIZE, GFP_KERNEL);
+	if (!kbuf)
+		return -ENOMEM;
+
+	rc = asic_funcs->qp_read(hdev, &hdev->qp_info, kbuf, KBUF_OUT_SIZE);
+	if (rc)
+		goto out;
+
+	rc = simple_read_from_buffer(buf, count, ppos, kbuf, strlen(kbuf) + 1);
+
+out:
+	kfree(kbuf);
+
+	return rc;
+}
+
+static ssize_t debugfs_qp_write(struct file *f, const char __user *buf, size_t count, loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	struct hbl_cn_qp_info *qp_info = &hdev->qp_info;
+	u32 port, qpn, max_num_of_ports;
+	u8 req, full_print, force_read;
+	char kbuf[KBUF_IN_SIZE] = {0};
+	char *c1, *c2;
+	ssize_t rc;
+
+	max_num_of_ports = hdev->cn_props.max_num_of_ports;
+
+	if (count > sizeof(kbuf) - 1)
+		goto err;
+	if (copy_from_user(kbuf, buf, count))
+		goto err;
+	kbuf[count] = '\0';
+
+	c1 = kbuf;
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtou32(c1, 10, &port);
+	if (rc)
+		goto err;
+
+	if (port >= max_num_of_ports) {
+		dev_err(hdev->dev, "port max value is %d\n", max_num_of_ports - 1);
+		return -EINVAL;
+	}
+
+	c1 = c2 + 1;
+
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtou32(c1, 10, &qpn);
+	if (rc)
+		goto err;
+
+	c1 = c2 + 1;
+
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtou8(c1, 10, &req);
+	if (rc)
+		goto err;
+
+	if (req & ~1) {
+		dev_err(hdev->dev, "req should be 0 or 1\n");
+		goto err;
+	}
+
+	c1 = c2 + 1;
+
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtou8(c1, 10, &full_print);
+	if (rc)
+		goto err;
+
+	if (full_print & ~1) {
+		dev_err(hdev->dev, "full_print should be 0 or 1\n");
+		goto err;
+	}
+
+	c1 = c2 + 1;
+
+	/* may not be the last element due to the optional params */
+	c2 = strchr(c1, ' ');
+	if (c2)
+		*c2 = '\0';
+
+	rc = kstrtou8(c1, 10, &force_read);
+	if (rc)
+		goto err;
+
+	if (force_read & ~1) {
+		dev_err(hdev->dev, "force_read should be 0 or 1\n");
+		goto err;
+	}
+
+	qp_info->port = port;
+	qp_info->qpn = qpn;
+	qp_info->req = req;
+	qp_info->full_print = full_print;
+	qp_info->force_read = force_read;
+
+	return count;
+err:
+	dev_err(hdev->dev,
+		"usage: echo <port> <qpn> <is_req> <is_full_print> <force_read> [<exts_print>] > nic_qp\n");
+
+	return -EINVAL;
+}
+
+static const struct file_operations debugfs_qp_fops = {
+	.owner = THIS_MODULE,
+	.read = debugfs_qp_read,
+	.write = debugfs_qp_write
+};
+
+static ssize_t debugfs_wqe_read(struct file *f, char __user *buf, size_t count, loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	struct hbl_cn_asic_funcs *asic_funcs;
+	char *kbuf;
+	ssize_t rc;
+
+	asic_funcs = hdev->asic_funcs;
+
+	if (*ppos)
+		return 0;
+
+	kbuf = kzalloc(KBUF_OUT_SIZE, GFP_KERNEL);
+	if (!kbuf)
+		return -ENOMEM;
+
+	rc = asic_funcs->wqe_read(hdev, kbuf, KBUF_OUT_SIZE);
+	if (rc)
+		goto out;
+
+	rc = simple_read_from_buffer(buf, count, ppos, kbuf, strlen(kbuf) + 1);
+
+out:
+	kfree(kbuf);
+
+	return rc;
+}
+
+static ssize_t debugfs_wqe_write(struct file *f, const char __user *buf, size_t count, loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	struct hbl_cn_wqe_info *wqe_info = &hdev->wqe_info;
+	u32 port, qpn, wqe_idx, max_num_of_lanes;
+	char kbuf[KBUF_IN_SIZE] = {0};
+	char *c1, *c2;
+	ssize_t rc;
+	u8 tx;
+
+	max_num_of_lanes = hdev->cn_props.max_num_of_lanes;
+
+	if (count > sizeof(kbuf) - 1)
+		goto err;
+	if (copy_from_user(kbuf, buf, count))
+		goto err;
+	kbuf[count] = '\0';
+
+	c1 = kbuf;
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtou32(c1, 10, &port);
+	if (rc)
+		goto err;
+
+	if (port >= max_num_of_lanes) {
+		dev_err(hdev->dev, "port max value is %d\n", max_num_of_lanes - 1);
+		return -EINVAL;
+	}
+
+	c1 = c2 + 1;
+
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtou32(c1, 10, &qpn);
+	if (rc)
+		goto err;
+
+	c1 = c2 + 1;
+
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtou32(c1, 10, &wqe_idx);
+	if (rc)
+		goto err;
+
+	c1 = c2 + 1;
+
+	rc = kstrtou8(c1, 10, &tx);
+	if (rc)
+		goto err;
+
+	if (tx & ~1) {
+		dev_err(hdev->dev, "tx should be 0 or 1\n");
+		goto err;
+	}
+
+	wqe_info->port = port;
+	wqe_info->qpn = qpn;
+	wqe_info->wqe_idx = wqe_idx;
+	wqe_info->tx = tx;
+
+	return count;
+err:
+	dev_err(hdev->dev, "usage: echo <port> <qpn> <wqe_idx> <is_tx> > nic_wqe\n");
+
+	return -EINVAL;
+}
+
+static const struct file_operations debugfs_wqe_fops = {
+	.owner = THIS_MODULE,
+	.read = debugfs_wqe_read,
+	.write = debugfs_wqe_write
+};
+
+static ssize_t debugfs_reset_cnt_write(struct file *f, const char __user *buf, size_t count,
+				       loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	ssize_t rc;
+	u32 val;
+
+	rc = kstrtou32_from_user(buf, count, 10, &val);
+	if (rc)
+		return rc;
+
+	hbl_cn_reset_ports_toggle_counters(hdev);
+	hbl_cn_reset_stats_counters(hdev);
+
+	return count;
+}
+
+static const struct file_operations debugfs_reset_cnt_fops = {
+	.owner = THIS_MODULE,
+	.write = debugfs_reset_cnt_write
+};
+
+static int parse_user_mac_lane_remap_data(u32 *dest_arr, int *dest_arr_cnt, char *buf, int count)
+{
+	int i = 0, j = 0, rc;
+	int offset;
+	u32 val;
+
+	while (i < count) {
+		offset = strcspn(&buf[i], " ");
+		buf[i + offset] = '\0';
+
+		rc = kstrtou32(&buf[i], 16, &val);
+		if (rc)
+			return rc;
+
+		dest_arr[j++] = val;
+		i += (offset + 1);
+	}
+
+	*dest_arr_cnt = j;
+
+	return 0;
+}
+
+static ssize_t debugfs_mac_lane_remap_write(struct file *f, const char __user *buf, size_t count,
+					    loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	struct hbl_cn_properties *cn_props;
+	u32 *mac_lane_remap_buf;
+	int rc, n_parsed = 0;
+	char *kbuf;
+
+	cn_props = &hdev->cn_props;
+
+	kbuf = kcalloc(count + 1, sizeof(*buf), GFP_KERNEL);
+	if (!kbuf)
+		return -ENOMEM;
+
+	mac_lane_remap_buf = kcalloc(cn_props->num_of_macros, sizeof(*mac_lane_remap_buf),
+				     GFP_KERNEL);
+	if (!mac_lane_remap_buf) {
+		rc = -ENOMEM;
+		goto err_free_kbuf;
+	}
+
+	rc = copy_from_user(kbuf, buf, count);
+	if (rc)
+		goto err_free_mac_lane_remap_buf;
+
+	/* Add trailing space to simplify parsing user data. */
+	kbuf[count] = ' ';
+
+	rc = parse_user_mac_lane_remap_data(mac_lane_remap_buf, &n_parsed, kbuf, count + 1);
+	if (rc || n_parsed != cn_props->num_of_macros) {
+		rc = -EINVAL;
+		goto err_parse;
+	}
+
+	memcpy(hdev->mac_lane_remap, mac_lane_remap_buf,
+	       sizeof(*mac_lane_remap_buf) * cn_props->num_of_macros);
+
+	rc = hbl_device_hard_reset_sync(hdev);
+	if (rc)
+		goto err_free_mac_lane_remap_buf;
+
+	kfree(mac_lane_remap_buf);
+	kfree(kbuf);
+
+	return count;
+err_parse:
+	dev_err_ratelimited(hdev->dev,
+			    "usage: echo macro0 macro1 macro2 ... macroX > mac_lane_remap\n");
+err_free_mac_lane_remap_buf:
+	kfree(mac_lane_remap_buf);
+err_free_kbuf:
+	kfree(kbuf);
+	return -EINVAL;
+}
+
+static ssize_t debugfs_mac_lane_remap_read(struct file *f, char __user *buf, size_t count,
+					   loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	char kbuf[MAC_LANE_REMAP_READ_SIZE];
+	struct hbl_cn_properties *cn_props;
+	int i, j;
+
+	cn_props = &hdev->cn_props;
+
+	if (*ppos)
+		return 0;
+
+	for (i = 0, j = 0; i < cn_props->num_of_macros; i++, j += MAC_LANE_REMAP_READ_SIZE) {
+		memset(kbuf, 0, MAC_LANE_REMAP_READ_SIZE);
+		sprintf(kbuf, "0x%x ", hdev->mac_lane_remap[i]);
+
+		if (copy_to_user(&buf[j], kbuf, MAC_LANE_REMAP_READ_SIZE)) {
+			dev_err(hdev->dev, "error in copying lane info to user\n");
+			return -EFAULT;
+		}
+
+		*ppos += MAC_LANE_REMAP_READ_SIZE;
+	}
+
+	return j + 1;
+}
+
+static const struct file_operations debugfs_mac_lane_remap_fops = {
+	.owner = THIS_MODULE,
+	.write = debugfs_mac_lane_remap_write,
+	.read = debugfs_mac_lane_remap_read,
+};
+
+static ssize_t debugfs_eth_loopback_write(struct file *f, const char __user *buf, size_t count,
+					  loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	u32 val = 0;
+	int rc;
+
+	rc = kstrtou32_from_user(buf, count, 10, &val);
+	if (rc)
+		return rc;
+
+	hdev->eth_loopback = !!val;
+
+	dev_info(hdev->dev, "%s eth_loopback\n", hdev->eth_loopback ? "enable" : "disable");
+
+	return count;
+}
+
+static ssize_t debugfs_eth_loopback_read(struct file *f, char __user *buf, size_t count,
+					 loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+
+	return debugfs_print_value_to_buffer(buf, count, ppos, "%u", hdev->eth_loopback);
+}
+
+static const struct file_operations debugfs_eth_loopback_fops = {
+	.owner = THIS_MODULE,
+	.write = debugfs_eth_loopback_write,
+	.read = debugfs_eth_loopback_read,
+};
+
+static ssize_t debugfs_phy_regs_print_write(struct file *f, const char __user *buf, size_t count,
+					    loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	u32 val = 0;
+	int rc;
+
+	rc = kstrtou32_from_user(buf, count, 10, &val);
+	if (rc)
+		return rc;
+
+	hdev->phy_regs_print = !!val;
+
+	dev_info(hdev->dev, "%s printing PHY registers\n",
+		 hdev->phy_regs_print ? "enable" : "disable");
+
+	return count;
+}
+
+static ssize_t debugfs_phy_regs_print_read(struct file *f, char __user *buf, size_t count,
+					   loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+
+	return debugfs_print_value_to_buffer(buf, count, ppos, "%u", hdev->phy_regs_print);
+}
+
+static const struct file_operations debugfs_phy_regs_print_fops = {
+	.owner = THIS_MODULE,
+	.write = debugfs_phy_regs_print_write,
+	.read = debugfs_phy_regs_print_read,
+};
+
+static ssize_t debugfs_show_internal_ports_status_read(struct file *f, char __user *buf,
+						       size_t count, loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	char kbuf[MAX_INT_PORT_STS_KBUF_SIZE];
+	struct hbl_cn_port *cn_port;
+	int i, cnt, total_cnt;
+
+	if (*ppos)
+		return 0;
+
+	total_cnt = 0;
+
+	for (i = 0; i < hdev->cn_props.max_num_of_ports; i++) {
+		if (!(hdev->ports_mask & BIT(i)) || (hdev->ext_ports_mask & BIT(i)))
+			continue;
+
+		cn_port = &hdev->cn_ports[i];
+
+		memset(kbuf, 0, MAX_INT_PORT_STS_KBUF_SIZE);
+		cnt = sprintf(kbuf, "Port %-2u: %s\n",
+			      cn_port->port, cn_port->pcs_link ? "UP" : "DOWN");
+
+		if (copy_to_user(&buf[total_cnt], kbuf, cnt)) {
+			dev_err(hdev->dev, "error in copying info to user\n");
+			return -EFAULT;
+		}
+
+		total_cnt += cnt;
+		*ppos += cnt;
+	}
+
+	if (!total_cnt) {
+		char *msg = "No internal ports found\n";
+
+		return simple_read_from_buffer(buf, count, ppos, msg, strlen(msg));
+	}
+
+	return total_cnt + 1;
+}
+
+static const struct file_operations debugfs_show_internal_ports_status_fops = {
+	.owner = THIS_MODULE,
+	.read = debugfs_show_internal_ports_status_read,
+};
+
+static ssize_t debugfs_print_fec_stats_read(struct file *f, char __user *buf, size_t count,
+					    loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	struct hbl_cn_asic_funcs *asic_funcs;
+	struct hbl_cn_port *cn_port;
+	char *kbuf;
+	int i, rc;
+
+	asic_funcs = hdev->asic_funcs;
+
+	if (*ppos)
+		return 0;
+
+	kbuf = kzalloc(KBUF_OUT_BIG_SIZE, GFP_KERNEL);
+	if (!kbuf)
+		return -ENOMEM;
+
+	sprintf(kbuf + strlen(kbuf), "Card %u FEC stats:\n", hdev->card_location);
+
+	for (i = 0; i < hdev->cn_props.max_num_of_ports; i++) {
+		if (!(hdev->ports_mask & BIT(i)))
+			continue;
+
+		cn_port = &hdev->cn_ports[i];
+
+		asic_funcs->port_funcs->collect_fec_stats(cn_port, kbuf, KBUF_OUT_BIG_SIZE);
+	}
+
+	rc = simple_read_from_buffer(buf, count, ppos, kbuf, strlen(kbuf) + 1);
+
+	kfree(kbuf);
+
+	return rc;
+}
+
+static const struct file_operations debugfs_print_fec_stats_fops = {
+	.owner = THIS_MODULE,
+	.read = debugfs_print_fec_stats_read,
+};
+
+static ssize_t debugfs_phy_set_nrz_write(struct file *f, const char __user *buf, size_t count,
+					 loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	bool val;
+	int rc;
+
+	rc = kstrtobool_from_user(buf, count, &val);
+	if (rc)
+		return rc;
+
+	if (val == hdev->phy_set_nrz)
+		return count;
+
+	hdev->phy_set_nrz = val;
+	hdev->skip_phy_default_tx_taps_cfg = 0;
+
+	dev_info(hdev->dev, "%s NRZ mode\n", hdev->phy_set_nrz ? "Enable" : "Disable");
+
+	rc = hbl_device_hard_reset_sync(hdev);
+	if (rc)
+		return -EINVAL;
+
+	return count;
+}
+
+static const struct file_operations debugfs_phy_set_nrz_fops = {
+	.owner = THIS_MODULE,
+	.write = debugfs_phy_set_nrz_write,
+};
+
+static ssize_t debugfs_phy_dump_serdes_params_read(struct file *f, char __user *buf, size_t count,
+						   loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	struct hbl_cn_asic_funcs *asic_funcs;
+	char *kbuf;
+	ssize_t rc;
+
+	asic_funcs = hdev->asic_funcs;
+
+	if (*ppos)
+		return 0;
+
+	/* For ASICs that don't support this feature, return an error */
+	if (!asic_funcs->phy_dump_serdes_params)
+		return -EINVAL;
+
+	kbuf = kzalloc(KBUF_OUT_BIG_SIZE, GFP_KERNEL);
+	if (!kbuf)
+		return -ENOMEM;
+
+	asic_funcs->phy_dump_serdes_params(hdev, kbuf, KBUF_OUT_BIG_SIZE);
+
+	rc = simple_read_from_buffer(buf, count, ppos, kbuf, strlen(kbuf) + 1);
+
+	kfree(kbuf);
+
+	return rc;
+}
+
+static ssize_t debugfs_phy_dump_serdes_params_write(struct file *f, const char __user *buf,
+						    size_t count, loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	struct hbl_cn_asic_funcs *asic_funcs;
+	u32 port;
+	int rc;
+
+	asic_funcs = hdev->asic_funcs;
+
+	/* For ASICs that don't support this feature, return an error */
+	if (!asic_funcs->phy_dump_serdes_params)
+		return -EINVAL;
+
+	rc = kstrtou32_from_user(buf, count, 10, &port);
+	if (rc)
+		return rc;
+
+	if (port >= hdev->cn_props.max_num_of_ports) {
+		dev_err(hdev->dev, "Invalid port number %u\n", port);
+		return -EINVAL;
+	}
+
+	hdev->phy_port_to_dump = port;
+
+	return count;
+}
+
+static const struct file_operations debugfs_phy_dump_serdes_params_fops = {
+	.owner = THIS_MODULE,
+	.read = debugfs_phy_dump_serdes_params_read,
+	.write = debugfs_phy_dump_serdes_params_write,
+};
+
+static ssize_t debugfs_inject_rx_err_read(struct file *f, char __user *buf, size_t count,
+					  loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+
+	return debugfs_print_value_to_buffer(buf, count, ppos, "%u", hdev->rx_drop_percent);
+}
+
+static ssize_t debugfs_inject_rx_err_write(struct file *f, const char __user *buf, size_t count,
+					   loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	struct hbl_cn_asic_funcs *asic_funcs;
+	u32 val;
+	int rc;
+
+	asic_funcs = hdev->asic_funcs;
+
+	if (*ppos)
+		return 0;
+
+	rc = kstrtou32_from_user(buf, count, 10, &val);
+	if (rc)
+		return rc;
+
+	if (val > 100) {
+		dev_dbg_ratelimited(hdev->dev, "Invalid drop percentage %d\n", val);
+		return -EINVAL;
+	}
+
+	asic_funcs->inject_rx_err(hdev, val);
+
+	return count;
+}
+
+static const struct file_operations debugfs_inject_rx_err_fops = {
+	.owner = THIS_MODULE,
+	.read = debugfs_inject_rx_err_read,
+	.write = debugfs_inject_rx_err_write,
+};
+
+static ssize_t debugfs_override_port_status_write(struct file *f, const char __user *buf,
+						  size_t count, loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	char kbuf[KBUF_IN_SIZE] = {0};
+	struct hbl_cn_port *cn_port;
+	u32 port, max_num_of_ports;
+	char *c1, *c2;
+	ssize_t rc;
+	u8 up;
+
+	max_num_of_ports = hdev->cn_props.max_num_of_ports;
+
+	if (count > sizeof(kbuf) - 1)
+		goto err;
+	if (copy_from_user(kbuf, buf, count))
+		goto err;
+	kbuf[count] = '\0';
+
+	c1 = kbuf;
+	c2 = strchr(c1, ' ');
+	if (!c2)
+		goto err;
+	*c2 = '\0';
+
+	rc = kstrtou32(c1, 10, &port);
+	if (rc)
+		goto err;
+
+	if (port >= max_num_of_ports) {
+		dev_err(hdev->dev, "port max value is %d\n", max_num_of_ports - 1);
+		return -EINVAL;
+	}
+
+	/* Turn off speculation due to Spectre vulnerability */
+	port = array_index_nospec(port, max_num_of_ports);
+
+	c1 = c2 + 1;
+
+	rc = kstrtou8(c1, 10, &up);
+	if (rc)
+		goto err;
+
+	if (hdev->ports_mask & BIT(port)) {
+		cn_port = &hdev->cn_ports[port];
+
+		cn_port->pcs_link = !!up;
+		hbl_cn_phy_set_port_status(cn_port, !!up);
+	}
+
+	return count;
+err:
+	dev_err(hdev->dev, "usage: echo <port> <status> > nic_override_port_status\n");
+
+	return -EINVAL;
+}
+
+static const struct file_operations debugfs_override_port_status_fops = {
+	.owner = THIS_MODULE,
+	.write = debugfs_override_port_status_write,
+};
+
+static ssize_t debugfs_write_wqe_index_checker(struct file *f, const char __user *buf, size_t count,
+					       loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	struct hbl_cn_asic_funcs *asic_funcs;
+	u32 val;
+	int rc;
+
+	asic_funcs = hdev->asic_funcs;
+
+	/* For ASICs that don't support this feature, return an error */
+	if (!asic_funcs->set_wqe_index_checker)
+		return -EINVAL;
+
+	rc = kstrtou32_from_user(buf, count, 10, &val);
+	if (rc)
+		return rc;
+
+	rc = asic_funcs->set_wqe_index_checker(hdev, !!val);
+	if (rc)
+		return rc;
+
+	return count;
+}
+
+static ssize_t debugfs_read_wqe_index_checker(struct file *f, char __user *buf, size_t count,
+					      loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	struct hbl_cn_asic_funcs *asic_funcs;
+	u32 index_checker;
+
+	asic_funcs = hdev->asic_funcs;
+
+	if (!asic_funcs->get_wqe_index_checker)
+		return -EINVAL;
+
+	index_checker = asic_funcs->get_wqe_index_checker(hdev);
+
+	return debugfs_print_value_to_buffer(buf, count, ppos, "%u", index_checker);
+}
+
+static const struct file_operations debugfs_wqe_index_checker_fops = {
+	.owner = THIS_MODULE,
+	.write = debugfs_write_wqe_index_checker,
+	.read = debugfs_read_wqe_index_checker,
+};
+
+static ssize_t debugfs_accumulate_fec_duration_write(struct file *f, const char __user *buf,
+						     size_t count, loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	u32 val = 0;
+	int rc;
+
+	rc = kstrtou32_from_user(buf, count, 10, &val);
+	if (rc)
+		return rc;
+
+	if (!val || val > ACCUMULATE_FEC_STATS_DURATION_MS_MAX)
+		return -EINVAL;
+
+	hdev->accumulate_fec_duration = val;
+
+	return count;
+}
+
+static ssize_t debugfs_accumulate_fec_duration_read(struct file *f, char __user *buf, size_t count,
+						    loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+
+	return debugfs_print_value_to_buffer(buf, count, ppos, "%u",
+					     hdev->accumulate_fec_duration);
+}
+
+static const struct file_operations debugfs_accumulate_fec_duration_fops = {
+	.owner = THIS_MODULE,
+	.write = debugfs_accumulate_fec_duration_write,
+	.read = debugfs_accumulate_fec_duration_read,
+};
+
+static ssize_t debugfs_mac_loopback_read(struct file *f, char __user *buf, size_t count,
+					 loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+
+	return debugfs_print_value_to_buffer(buf, count, ppos, "0x%llx", hdev->mac_loopback);
+}
+
+static ssize_t debugfs_mac_loopback_write(struct file *f, const char __user *buf, size_t count,
+					  loff_t *ppos)
+{
+	struct hbl_cn_device *hdev = file_inode(f)->i_private;
+	ssize_t ret;
+	u64 val;
+	int rc;
+
+	ret = kstrtoull_from_user(buf, count, 16, &val);
+	if (ret)
+		return ret;
+
+	if (val == hdev->mac_loopback)
+		return count;
+
+	hdev->mac_loopback = val;
+	rc = hbl_device_hard_reset_sync(hdev);
+	if (rc)
+		return rc;
+
+	return count;
+}
+
+static const struct file_operations debugfs_mac_loopback_fops = {
+	.owner = THIS_MODULE,
+	.read = debugfs_mac_loopback_read,
+	.write = debugfs_mac_loopback_write,
+};
+
+static void __hbl_cn_debugfs_dev_init(struct hbl_cn_device *hdev, struct dentry *root_dir)
+{
+	HBL_CN_DEBUGFS_CREATE_FILE(NIC_MAC_LOOPBACK, 0644, root_dir, hdev,
+				   &debugfs_mac_loopback_fops);
+
+	HBL_CN_DEBUGFS_CREATE_FILE(NIC_PAM4_TX_TAPS, 0444, root_dir, hdev,
+				   &debugfs_pam4_tx_taps_fops);
+
+	HBL_CN_DEBUGFS_CREATE_FILE(NIC_NRZ_TX_TAPS, 0444, root_dir, hdev,
+				   &debugfs_nrz_tx_taps_fops);
+
+	HBL_CN_DEBUGFS_CREATE_FILE(NIC_POLARITY, 0444, root_dir, hdev, &debugfs_polarity_fops);
+
+	HBL_CN_DEBUGFS_CREATE_FILE(NIC_QP, 0444, root_dir, hdev, &debugfs_qp_fops);
+
+	HBL_CN_DEBUGFS_CREATE_FILE(NIC_WQE, 0444, root_dir, hdev, &debugfs_wqe_fops);
+
+	HBL_CN_DEBUGFS_CREATE_FILE(NIC_RESET_CNT, 0444, root_dir, hdev,
+				   &debugfs_reset_cnt_fops);
+
+	HBL_CN_DEBUGFS_CREATE_FILE(NIC_MAC_LANE_REMAP, 0644, root_dir, hdev,
+				   &debugfs_mac_lane_remap_fops);
+
+	HBL_CN_DEBUGFS_CREATE_U8(NIC_RAND_STATUS, 0644, root_dir, &hdev->rand_status);
+
+	HBL_CN_DEBUGFS_CREATE_U8(NIC_MMU_BYPASS, 0644, root_dir, &hdev->mmu_bypass);
+
+	HBL_CN_DEBUGFS_CREATE_FILE(NIC_ETH_LOOPBACK, 0644, root_dir, hdev,
+				   &debugfs_eth_loopback_fops);
+
+	HBL_CN_DEBUGFS_CREATE_FILE(NIC_PHY_REGS_PRINT, 0444, root_dir, hdev,
+				   &debugfs_phy_regs_print_fops);
+
+	HBL_CN_DEBUGFS_CREATE_FILE(NIC_SHOW_INTERNAL_PORTS_STATUS, 0444, root_dir, hdev,
+				   &debugfs_show_internal_ports_status_fops);
+
+	HBL_CN_DEBUGFS_CREATE_FILE(NIC_PRINT_FEC_STATS, 0444, root_dir, hdev,
+				   &debugfs_print_fec_stats_fops);
+
+	HBL_CN_DEBUGFS_CREATE_U8(NIC_DISABLE_DECAP, 0644, root_dir, &hdev->is_decap_disabled);
+
+	HBL_CN_DEBUGFS_CREATE_FILE(NIC_PHY_SET_NRZ, 0444, root_dir, hdev,
+				   &debugfs_phy_set_nrz_fops);
+
+	HBL_CN_DEBUGFS_CREATE_FILE(NIC_PHY_DUMP_SERDES_PARAMS, 0444, root_dir, hdev,
+				   &debugfs_phy_dump_serdes_params_fops);
+
+	HBL_CN_DEBUGFS_CREATE_FILE(NIC_INJECT_RX_ERR, 0444, root_dir, hdev,
+				   &debugfs_inject_rx_err_fops);
+
+	HBL_CN_DEBUGFS_CREATE_U8(NIC_PHY_CALC_BER, 0644, root_dir, &hdev->phy_calc_ber);
+
+	HBL_CN_DEBUGFS_CREATE_U16(NIC_PHY_CALC_BER_WAIT_SEC, 0644, root_dir,
+				  &hdev->phy_calc_ber_wait_sec);
+
+	HBL_CN_DEBUGFS_CREATE_FILE(NIC_OVERRIDE_PORT_STATUS, 0200, root_dir, hdev,
+				   &debugfs_override_port_status_fops);
+
+	HBL_CN_DEBUGFS_CREATE_FILE(NIC_WQE_INDEX_CHECKER, 0644, root_dir, hdev,
+				   &debugfs_wqe_index_checker_fops);
+
+	HBL_CN_DEBUGFS_CREATE_FILE(NIC_ACCUMULATE_FEC_DURATION, 0644, root_dir, hdev,
+				   &debugfs_accumulate_fec_duration_fops);
+
+	HBL_CN_DEBUGFS_CREATE_U8(NIC_PHY_FORCE_FIRST_TX_TAPS_CFG, 0644, root_dir,
+				 &hdev->phy_force_first_tx_taps_cfg);
+}
+
+void hbl_cn_debugfs_dev_init(struct hbl_cn_device *hdev)
+{
+	char name[64] = {0};
+
+	snprintf(name, sizeof(name), "hbl_cn%d", hdev->id);
+	hdev->cn_dentry = debugfs_create_dir(name, hbl_cn_debug_root);
+	__hbl_cn_debugfs_dev_init(hdev, hdev->cn_dentry);
+}
+
+void hbl_cn_debugfs_dev_fini(struct hbl_cn_device *hdev)
+{
+	debugfs_remove_recursive(hdev->cn_dentry);
+}
+
+void __init hbl_cn_debugfs_init(void)
+{
+	hbl_cn_debug_root = debugfs_create_dir(module_name(THIS_MODULE), NULL);
+}
+
+void hbl_cn_debugfs_fini(void)
+{
+	debugfs_remove_recursive(hbl_cn_debug_root);
+}
+
+#else
+
+void hbl_cn_debugfs_dev_init(struct hbl_cn_device *hdev)
+{
+}
+
+void hbl_cn_debugfs_dev_fini(struct hbl_cn_device *hdev)
+{
+}
+
+void __init hbl_cn_debugfs_init(void)
+{
+}
+
+void hbl_cn_debugfs_fini(void)
+{
+}
+
+#endif /* CONFIG_DEBUG_FS */
diff --git a/drivers/net/ethernet/intel/hbl_cn/common/hbl_cn_drv.c b/drivers/net/ethernet/intel/hbl_cn/common/hbl_cn_drv.c
index 5ea690509592..1a26d9f3b9a4 100644
--- a/drivers/net/ethernet/intel/hbl_cn/common/hbl_cn_drv.c
+++ b/drivers/net/ethernet/intel/hbl_cn/common/hbl_cn_drv.c
@@ -207,15 +207,32 @@  static struct auxiliary_driver hbl_cn_driver = {
 
 static int __init hbl_cn_init(void)
 {
+	int rc;
+
 	pr_info("loading driver\n");
 
-	return auxiliary_driver_register(&hbl_cn_driver);
+	hbl_cn_debugfs_init();
+
+	rc = auxiliary_driver_register(&hbl_cn_driver);
+	if (rc) {
+		pr_err("Failed to register auxiliary driver\n");
+		goto remove_debugfs;
+	}
+
+	return 0;
+
+remove_debugfs:
+	hbl_cn_debugfs_fini();
+
+	return rc;
 }
 
 static void __exit hbl_cn_exit(void)
 {
 	auxiliary_driver_unregister(&hbl_cn_driver);
 
+	hbl_cn_debugfs_fini();
+
 	pr_info("driver removed\n");
 }