| Message ID | 20240624-x1e-swr-reset-v1-3-da326d0733d4@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | arm64: dts: qcom: x1e80100: Add soundwire controller resets | expand |
On Mon, Jun 24, 2024 at 11:55:32AM GMT, Srinivas Kandagatla wrote: > Soundwire controllers (WSA, WSA2, RX, TX) require reset lines to enable > switching clock control from hardware to software. > > Add them along with the reset control providers. > > Without this reset we might hit fifo under/over run when we try to write to > soundwire device registers. > > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > --- > arch/arm64/boot/dts/qcom/x1e80100.dtsi | 23 +++++++++++++++++++++++ > 1 file changed, 23 insertions(+) I doesn't look like this was tested against the bindings.
On 24/06/2024 12:09, Dmitry Baryshkov wrote: > On Mon, Jun 24, 2024 at 11:55:32AM GMT, Srinivas Kandagatla wrote: >> Soundwire controllers (WSA, WSA2, RX, TX) require reset lines to enable >> switching clock control from hardware to software. >> >> Add them along with the reset control providers. >> >> Without this reset we might hit fifo under/over run when we try to write to >> soundwire device registers. >> >> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> >> --- >> arch/arm64/boot/dts/qcom/x1e80100.dtsi | 23 +++++++++++++++++++++++ >> 1 file changed, 23 insertions(+) > > I doesn't look like this was tested against the bindings. True, let me do that and send a new version. --srini >
Hi Srinivas,
kernel test robot noticed the following build warnings:
[auto build test WARNING on 781025f172e19ca5682d7bfc5243e7aa74c4977f]
url: https://github.com/intel-lab-lkp/linux/commits/Srinivas-Kandagatla/dt-bindings-clock-Add-x1e80100-LPASS-AUDIOCC-reset-controller/20240625-210534
base: 781025f172e19ca5682d7bfc5243e7aa74c4977f
patch link: https://lore.kernel.org/r/20240624-x1e-swr-reset-v1-3-da326d0733d4%40linaro.org
patch subject: [PATCH 3/3] arm64: dts: qcom: x1e80100: add soundwire controller resets
config: arm64-randconfig-051-20240627 (https://download.01.org/0day-ci/archive/20240627/202406271923.v945xTG8-lkp@intel.com/config)
compiler: clang version 19.0.0git (https://github.com/llvm/llvm-project 326ba38a991250a8587a399a260b0f7af2c9166a)
dtschema version: 2024.6.dev1+g833054f
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240627/202406271923.v945xTG8-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202406271923.v945xTG8-lkp@intel.com/
dtcheck warnings: (new ones prefixed by >>)
arch/arm64/boot/dts/qcom/x1e80100-crd.dtb: domain-idle-states: cluster-sleep-0: 'idle-state-name' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
arch/arm64/boot/dts/qcom/x1e80100-crd.dtb: domain-idle-states: cluster-sleep-1: 'idle-state-name' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
arch/arm64/boot/dts/qcom/x1e80100-crd.dtb: /soc@0/thermal-sensor@c271000: failed to match any schema with compatible: ['qcom,x1e80100-tsens', 'qcom,tsens-v2']
arch/arm64/boot/dts/qcom/x1e80100-crd.dtb: /soc@0/thermal-sensor@c272000: failed to match any schema with compatible: ['qcom,x1e80100-tsens', 'qcom,tsens-v2']
arch/arm64/boot/dts/qcom/x1e80100-crd.dtb: /soc@0/thermal-sensor@c273000: failed to match any schema with compatible: ['qcom,x1e80100-tsens', 'qcom,tsens-v2']
arch/arm64/boot/dts/qcom/x1e80100-crd.dtb: /soc@0/thermal-sensor@c274000: failed to match any schema with compatible: ['qcom,x1e80100-tsens', 'qcom,tsens-v2']
arch/arm64/boot/dts/qcom/x1e80100-crd.dtb: pci@1bf8000: Unevaluated properties are not allowed ('vddpe-3v3-supply' was unexpected)
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml#
>> arch/arm64/boot/dts/qcom/x1e80100-crd.dtb: clock-controller@6b6c000: compatible: ['qcom,x1e80100-lpassaudiocc', 'qcom,sc8280xp-lpassaudiocc'] is too long
from schema $id: http://devicetree.org/schemas/clock/qcom,sc8280xp-lpasscc.yaml#
>> arch/arm64/boot/dts/qcom/x1e80100-crd.dtb: clock-controller@6ea0000: compatible: ['qcom,x1e80100-lpasscc', 'qcom,sc8280xp-lpasscc'] is too long
from schema $id: http://devicetree.org/schemas/clock/qcom,sc8280xp-lpasscc.yaml#
arch/arm64/boot/dts/qcom/x1e80100-crd.dtb: usb@a2f8800: interrupt-names: ['pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short
from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm64/boot/dts/qcom/x1e80100-crd.dtb: /soc@0/arbiter@c400000/spmi@c42d000/pmic@3: failed to match any schema with compatible: ['qcom,pmc8380', 'qcom,spmi-pmic']
arch/arm64/boot/dts/qcom/x1e80100-crd.dtb: /soc@0/arbiter@c400000/spmi@c42d000/pmic@3/gpio@8800: failed to match any schema with compatible: ['qcom,pmc8380-gpio', 'qcom,spmi-gpio']
arch/arm64/boot/dts/qcom/x1e80100-crd.dtb: /soc@0/arbiter@c400000/spmi@c42d000/pmic@4: failed to match any schema with compatible: ['qcom,pmc8380', 'qcom,spmi-pmic']
arch/arm64/boot/dts/qcom/x1e80100-crd.dtb: /soc@0/arbiter@c400000/spmi@c42d000/pmic@4/gpio@8800: failed to match any schema with compatible: ['qcom,pmc8380-gpio', 'qcom,spmi-gpio']
arch/arm64/boot/dts/qcom/x1e80100-crd.dtb: /soc@0/arbiter@c400000/spmi@c42d000/pmic@5: failed to match any schema with compatible: ['qcom,pmc8380', 'qcom,spmi-pmic']
arch/arm64/boot/dts/qcom/x1e80100-crd.dtb: /soc@0/arbiter@c400000/spmi@c42d000/pmic@5/gpio@8800: failed to match any schema with compatible: ['qcom,pmc8380-gpio', 'qcom,spmi-gpio']
arch/arm64/boot/dts/qcom/x1e80100-crd.dtb: /soc@0/arbiter@c400000/spmi@c42d000/pmic@6: failed to match any schema with compatible: ['qcom,pmc8380', 'qcom,spmi-pmic']
--
arch/arm64/boot/dts/qcom/x1e80100-qcp.dtb: domain-idle-states: cluster-sleep-0: 'idle-state-name' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
arch/arm64/boot/dts/qcom/x1e80100-qcp.dtb: domain-idle-states: cluster-sleep-1: 'idle-state-name' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
arch/arm64/boot/dts/qcom/x1e80100-qcp.dtb: /soc@0/thermal-sensor@c271000: failed to match any schema with compatible: ['qcom,x1e80100-tsens', 'qcom,tsens-v2']
arch/arm64/boot/dts/qcom/x1e80100-qcp.dtb: /soc@0/thermal-sensor@c272000: failed to match any schema with compatible: ['qcom,x1e80100-tsens', 'qcom,tsens-v2']
arch/arm64/boot/dts/qcom/x1e80100-qcp.dtb: /soc@0/thermal-sensor@c273000: failed to match any schema with compatible: ['qcom,x1e80100-tsens', 'qcom,tsens-v2']
arch/arm64/boot/dts/qcom/x1e80100-qcp.dtb: /soc@0/thermal-sensor@c274000: failed to match any schema with compatible: ['qcom,x1e80100-tsens', 'qcom,tsens-v2']
arch/arm64/boot/dts/qcom/x1e80100-qcp.dtb: pci@1bf8000: Unevaluated properties are not allowed ('vddpe-3v3-supply' was unexpected)
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml#
>> arch/arm64/boot/dts/qcom/x1e80100-qcp.dtb: clock-controller@6b6c000: compatible: ['qcom,x1e80100-lpassaudiocc', 'qcom,sc8280xp-lpassaudiocc'] is too long
from schema $id: http://devicetree.org/schemas/clock/qcom,sc8280xp-lpasscc.yaml#
>> arch/arm64/boot/dts/qcom/x1e80100-qcp.dtb: clock-controller@6ea0000: compatible: ['qcom,x1e80100-lpasscc', 'qcom,sc8280xp-lpasscc'] is too long
from schema $id: http://devicetree.org/schemas/clock/qcom,sc8280xp-lpasscc.yaml#
arch/arm64/boot/dts/qcom/x1e80100-qcp.dtb: usb@a2f8800: interrupt-names: ['pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short
from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm64/boot/dts/qcom/x1e80100-qcp.dtb: /soc@0/arbiter@c400000/spmi@c42d000/pmic@3: failed to match any schema with compatible: ['qcom,pmc8380', 'qcom,spmi-pmic']
arch/arm64/boot/dts/qcom/x1e80100-qcp.dtb: /soc@0/arbiter@c400000/spmi@c42d000/pmic@3/gpio@8800: failed to match any schema with compatible: ['qcom,pmc8380-gpio', 'qcom,spmi-gpio']
arch/arm64/boot/dts/qcom/x1e80100-qcp.dtb: /soc@0/arbiter@c400000/spmi@c42d000/pmic@4: failed to match any schema with compatible: ['qcom,pmc8380', 'qcom,spmi-pmic']
arch/arm64/boot/dts/qcom/x1e80100-qcp.dtb: /soc@0/arbiter@c400000/spmi@c42d000/pmic@4/gpio@8800: failed to match any schema with compatible: ['qcom,pmc8380-gpio', 'qcom,spmi-gpio']
arch/arm64/boot/dts/qcom/x1e80100-qcp.dtb: /soc@0/arbiter@c400000/spmi@c42d000/pmic@5: failed to match any schema with compatible: ['qcom,pmc8380', 'qcom,spmi-pmic']
arch/arm64/boot/dts/qcom/x1e80100-qcp.dtb: /soc@0/arbiter@c400000/spmi@c42d000/pmic@5/gpio@8800: failed to match any schema with compatible: ['qcom,pmc8380-gpio', 'qcom,spmi-gpio']
arch/arm64/boot/dts/qcom/x1e80100-qcp.dtb: /soc@0/arbiter@c400000/spmi@c42d000/pmic@6: failed to match any schema with compatible: ['qcom,pmc8380', 'qcom,spmi-pmic']
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index 09fd6c8e53bb..fa28dbdd1419 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h> #include <dt-bindings/clock/qcom,x1e80100-dispcc.h> #include <dt-bindings/clock/qcom,x1e80100-gcc.h> #include <dt-bindings/clock/qcom,x1e80100-tcsr.h> @@ -3177,6 +3178,8 @@ swr3: soundwire@6ab0000 { pinctrl-0 = <&wsa2_swr_active>; pinctrl-names = "default"; + resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA2_CGCR>; + reset-names = "swr_audio_cgcr"; qcom,din-ports = <4>; qcom,dout-ports = <9>; @@ -3225,6 +3228,8 @@ swr1: soundwire@6ad0000 { pinctrl-0 = <&rx_swr_active>; pinctrl-names = "default"; + resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; + reset-names = "swr_audio_cgcr"; qcom,din-ports = <1>; qcom,dout-ports = <11>; @@ -3289,6 +3294,8 @@ swr0: soundwire@6b10000 { pinctrl-0 = <&wsa_swr_active>; pinctrl-names = "default"; + resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>; + reset-names = "swr_audio_cgcr"; qcom,din-ports = <4>; qcom,dout-ports = <9>; @@ -3309,6 +3316,13 @@ swr0: soundwire@6b10000 { status = "disabled"; }; + lpass_audiocc: clock-controller@6b6c000 { + compatible = "qcom,x1e80100-lpassaudiocc", "qcom,sc8280xp-lpassaudiocc"; + reg = <0 0x06b6c000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + swr2: soundwire@6d30000 { compatible = "qcom,soundwire-v2.0.0"; reg = <0 0x06d30000 0 0x10000>; @@ -3318,6 +3332,8 @@ swr2: soundwire@6d30000 { <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "core", "wakeup"; label = "TX"; + resets = <&lpasscc LPASS_AUDIO_SWR_TX_CGCR>; + reset-names = "swr_audio_cgcr"; pinctrl-0 = <&tx_swr_active>; pinctrl-names = "default"; @@ -3474,6 +3490,13 @@ data-pins { }; }; + lpasscc: clock-controller@6ea0000 { + compatible = "qcom,x1e80100-lpasscc", "qcom,sc8280xp-lpasscc"; + reg = <0 0x06ea0000 0 0x12000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + lpass_ag_noc: interconnect@7e40000 { compatible = "qcom,x1e80100-lpass-ag-noc"; reg = <0 0x7e40000 0 0xE080>;
Soundwire controllers (WSA, WSA2, RX, TX) require reset lines to enable switching clock control from hardware to software. Add them along with the reset control providers. Without this reset we might hit fifo under/over run when we try to write to soundwire device registers. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- arch/arm64/boot/dts/qcom/x1e80100.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)