| Message ID | 20240624153229.68882-3-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Add SD/MMC support for Renesas RZ/V2H(P) SoC | expand |
On 24.06.2024 18:32, Prabhakar wrote: > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Use the mmc_regulator_enable_vqmmc() and mmc_regulator_disable_vqmmc() APIs > to enable/disable the vqmmc regulator. > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>\ Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S > --- > v2->v3 > - Included RB tags > > v1->v2 > - New patch > --- > drivers/mmc/host/tmio_mmc_core.c | 7 +++---- > 1 file changed, 3 insertions(+), 4 deletions(-) > > diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c > index 93e912afd3ae..2ec1a74c85bc 100644 > --- a/drivers/mmc/host/tmio_mmc_core.c > +++ b/drivers/mmc/host/tmio_mmc_core.c > @@ -897,8 +897,8 @@ static void tmio_mmc_power_on(struct tmio_mmc_host *host, unsigned short vdd) > * It seems, VccQ should be switched on after Vcc, this is also what the > * omap_hsmmc.c driver does. > */ > - if (!IS_ERR(mmc->supply.vqmmc) && !ret) { > - ret = regulator_enable(mmc->supply.vqmmc); > + if (!ret) { > + ret = mmc_regulator_enable_vqmmc(mmc); > usleep_range(200, 300); > } > > @@ -911,8 +911,7 @@ static void tmio_mmc_power_off(struct tmio_mmc_host *host) > { > struct mmc_host *mmc = host->mmc; > > - if (!IS_ERR(mmc->supply.vqmmc)) > - regulator_disable(mmc->supply.vqmmc); > + mmc_regulator_disable_vqmmc(mmc); > > if (!IS_ERR(mmc->supply.vmmc)) > mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c index 93e912afd3ae..2ec1a74c85bc 100644 --- a/drivers/mmc/host/tmio_mmc_core.c +++ b/drivers/mmc/host/tmio_mmc_core.c @@ -897,8 +897,8 @@ static void tmio_mmc_power_on(struct tmio_mmc_host *host, unsigned short vdd) * It seems, VccQ should be switched on after Vcc, this is also what the * omap_hsmmc.c driver does. */ - if (!IS_ERR(mmc->supply.vqmmc) && !ret) { - ret = regulator_enable(mmc->supply.vqmmc); + if (!ret) { + ret = mmc_regulator_enable_vqmmc(mmc); usleep_range(200, 300); } @@ -911,8 +911,7 @@ static void tmio_mmc_power_off(struct tmio_mmc_host *host) { struct mmc_host *mmc = host->mmc; - if (!IS_ERR(mmc->supply.vqmmc)) - regulator_disable(mmc->supply.vqmmc); + mmc_regulator_disable_vqmmc(mmc); if (!IS_ERR(mmc->supply.vmmc)) mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);