diff mbox series

[1/3] arm64: dts: exynos: gs101: add syscon-poweroff and syscon-reboot nodes

Message ID 20240626194300.302327-2-peter.griffin@linaro.org (mailing list archive)
State Not Applicable, archived
Headers show
Series Add syscon-reboot and syscon-poweroff support for gs101/Pixel 6 | expand

Commit Message

Peter Griffin June 26, 2024, 7:42 p.m. UTC
Reboot of gs101 SoC can be handled by setting the
bit(SWRESET_SYSTEM[1]) of SYSTEM_CONFIGURATION register(PMU + 0x3a00).

Poweroff of gs101 SoC can be handled by setting bit(DATA[8]) of
PAD_CTRL_PWR_HOLD register (PMU + 0x3e9c).

Tested using "reboot" and "poweroff -p" commands.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
This feature has a runtime dependency on the following series
https://lore.kernel.org/linux-arm-kernel/20240621115544.1655458-1-peter.griffin@linaro.org/
and also the exynos-pmu and clk-gs101 patches in this series to be functional.
---
 arch/arm64/boot/dts/exynos/google/gs101.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

Comments

William McVicker June 26, 2024, 11:36 p.m. UTC | #1
On 06/26/2024, Peter Griffin wrote:
> Reboot of gs101 SoC can be handled by setting the
> bit(SWRESET_SYSTEM[1]) of SYSTEM_CONFIGURATION register(PMU + 0x3a00).
> 
> Poweroff of gs101 SoC can be handled by setting bit(DATA[8]) of
> PAD_CTRL_PWR_HOLD register (PMU + 0x3e9c).
> 
> Tested using "reboot" and "poweroff -p" commands.
> 
> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>

Tested-by: Will McVicker <willmcvicker@google.com>

Thanks Peter. I verified the device reboots and powers off with these updates.

--Will
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index a66e996666b8..ce24b80985a2 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -1394,6 +1394,21 @@  sysreg_apm: syscon@174204e0 {
 		pmu_system_controller: system-controller@17460000 {
 			compatible = "google,gs101-pmu", "syscon";
 			reg = <0x17460000 0x10000>;
+
+			poweroff: syscon-poweroff {
+				compatible = "syscon-poweroff";
+				regmap = <&pmu_system_controller>;
+				offset = <0x3e9c>; /* PAD_CTRL_PWR_HOLD */
+				mask = <0x100>; /* reset value */
+			};
+
+			reboot: syscon-reboot {
+				compatible = "syscon-reboot";
+				regmap = <&pmu_system_controller>;
+				offset = <0x3a00>; /* SYSTEM_CONFIGURATION */
+				mask = <0x2>; /* SWRESET_SYSTEM */
+				value = <0x2>; /* reset value */
+			};
 		};
 
 		pinctrl_gpio_alive: pinctrl@174d0000 {