| Message ID | 20240627054011.26621-1-zajec5@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | dt-bindings: net: bluetooth: convert MT7622 Bluetooth to the json-schema | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Not a local patch |
On Thu, 27 Jun 2024 07:40:11 +0200, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > This helps validating DTS files. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- > .../bluetooth/mediatek,mt7622-bluetooth.yaml | 61 +++++++++++++++++++ > .../bindings/net/mediatek-bluetooth.txt | 36 ----------- > 2 files changed, 61 insertions(+), 36 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7622-bluetooth.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7622-bluetooth.example.dtb: serial@1100c000: reg: [[0, 285261824], [0, 4096]] is too long from schema $id: http://devicetree.org/schemas/serial/8250.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7622-bluetooth.example.dtb: serial@1100c000: Unevaluated properties are not allowed ('clock-names' was unexpected) from schema $id: http://devicetree.org/schemas/serial/8250.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240627054011.26621-1-zajec5@gmail.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On 27.06.2024 08:18, Rob Herring (Arm) wrote:> On Thu, 27 Jun 2024 07:40:11 +0200, Rafał Miłecki wrote: >> From: Rafał Miłecki <rafal@milecki.pl> >> >> This helps validating DTS files. >> >> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> >> --- >> .../bluetooth/mediatek,mt7622-bluetooth.yaml | 61 +++++++++++++++++++ >> .../bindings/net/mediatek-bluetooth.txt | 36 ----------- >> 2 files changed, 61 insertions(+), 36 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7622-bluetooth.yaml >> > > My bot found errors running 'make dt_binding_check' on your patch: > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7622-bluetooth.example.dtb: serial@1100c000: reg: [[0, 285261824], [0, 4096]] is too long > from schema $id: http://devicetree.org/schemas/serial/8250.yaml# > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7622-bluetooth.example.dtb: serial@1100c000: Unevaluated properties are not allowed ('clock-names' was unexpected) > from schema $id: http://devicetree.org/schemas/serial/8250.yaml# Oops, I really need to fix my yamllint $ make ARCH=arm64 dt_binding_check DT_SCHEMA_FILES=net/bluetooth/mediatek,mt7622-bluetooth.yaml SCHEMA Documentation/devicetree/bindings/processed-schema.json CHKDT Documentation/devicetree/bindings DTEX Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7622-bluetooth.example.dts DTC_CHK Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7622-bluetooth.example.dtb LINT Documentation/devicetree/bindings invalid config: unknown option "extra-allowed" for rule "quoted-strings" xargs: /usr/bin/yamllint: exited with status 255; aborting
On Thu, Jun 27, 2024 at 07:40:11AM +0200, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > This helps validating DTS files. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- > .../bluetooth/mediatek,mt7622-bluetooth.yaml | 61 +++++++++++++++++++ > .../bindings/net/mediatek-bluetooth.txt | 36 ----------- > 2 files changed, 61 insertions(+), 36 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7622-bluetooth.yaml > > diff --git a/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7622-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7622-bluetooth.yaml > new file mode 100644 > index 000000000000..cb8ff93c93eb > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7622-bluetooth.yaml > @@ -0,0 +1,61 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/bluetooth/mediatek,mt7622-bluetooth.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek SoC built-in Bluetooth > + > +description: > + This device is a serial attached device to BTIF device and thus it must be a > + child node of the serial node with BTIF. The dt-bindings details for BTIF > + device can be known via Documentation/devicetree/bindings/serial/8250.yaml. > + > +maintainers: > + - Sean Wang <sean.wang@mediatek.com> > + > +allOf: > + - $ref: bluetooth-controller.yaml# > + > +properties: > + compatible: > + const: mediatek,mt7622-bluetooth > + > + clocks: > + maxItems: 1 > + > + clock-names: > + const: ref > + > + power-domains: > + maxItems: 1 > + > +required: > + - clocks > + - clock-names > + - power-domains > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/mt7622-clk.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/power/mt7622-power.h> > + > + serial@1100c000 { > + compatible = "mediatek,mt7622-btif", "mediatek,mtk-btif"; > + reg = <0 0x1100c000 0 0x1000>; > + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&pericfg CLK_PERI_BTIF_PD>; > + clock-names = "main"; > + reg-shift = <2>; > + reg-io-width = <4>; Just drop all this. Not relevant to *this* example. You just need: serial { > + > + bluetooth { > + compatible = "mediatek,mt7622-bluetooth"; > + power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>; > + clocks = <&clk25m>; > + clock-names = "ref"; > + }; > + };
diff --git a/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7622-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7622-bluetooth.yaml new file mode 100644 index 000000000000..cb8ff93c93eb --- /dev/null +++ b/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7622-bluetooth.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/bluetooth/mediatek,mt7622-bluetooth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek SoC built-in Bluetooth + +description: + This device is a serial attached device to BTIF device and thus it must be a + child node of the serial node with BTIF. The dt-bindings details for BTIF + device can be known via Documentation/devicetree/bindings/serial/8250.yaml. + +maintainers: + - Sean Wang <sean.wang@mediatek.com> + +allOf: + - $ref: bluetooth-controller.yaml# + +properties: + compatible: + const: mediatek,mt7622-bluetooth + + clocks: + maxItems: 1 + + clock-names: + const: ref + + power-domains: + maxItems: 1 + +required: + - clocks + - clock-names + - power-domains + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt7622-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/mt7622-power.h> + + serial@1100c000 { + compatible = "mediatek,mt7622-btif", "mediatek,mtk-btif"; + reg = <0 0x1100c000 0 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_BTIF_PD>; + clock-names = "main"; + reg-shift = <2>; + reg-io-width = <4>; + + bluetooth { + compatible = "mediatek,mt7622-bluetooth"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>; + clocks = <&clk25m>; + clock-names = "ref"; + }; + }; diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt index 9ef5bacda8c1..988c72685cbf 100644 --- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt @@ -1,39 +1,3 @@ -MediaTek SoC built-in Bluetooth Devices -================================== - -This device is a serial attached device to BTIF device and thus it must be a -child node of the serial node with BTIF. The dt-bindings details for BTIF -device can be known via Documentation/devicetree/bindings/serial/8250.yaml. - -Required properties: - -- compatible: Must be - "mediatek,mt7622-bluetooth": for MT7622 SoC -- clocks: Should be the clock specifiers corresponding to the entry in - clock-names property. -- clock-names: Should contain "ref" entries. -- power-domains: Phandle to the power domain that the device is part of - -Example: - - btif: serial@1100c000 { - compatible = "mediatek,mt7622-btif", - "mediatek,mtk-btif"; - reg = <0 0x1100c000 0 0x1000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>; - clocks = <&pericfg CLK_PERI_BTIF_PD>; - clock-names = "main"; - reg-shift = <2>; - reg-io-width = <4>; - - bluetooth { - compatible = "mediatek,mt7622-bluetooth"; - power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>; - clocks = <&clk25m>; - clock-names = "ref"; - }; - }; - MediaTek UART based Bluetooth Devices ==================================