diff mbox series

[v3,8/9] soc: qcom: cpr3: Add IPQ9574 definitions

Message ID 20240626104002.420535-9-quic_varada@quicinc.com (mailing list archive)
State Handled Elsewhere, archived
Headers show
Series Enable CPR for IPQ9574 | expand

Commit Message

Varadarajan Narayanan June 26, 2024, 10:40 a.m. UTC 
From: Praveenkumar I <quic_ipkumar@quicinc.com>

Add thread, scaling factor, CPR descriptor defines to enable CPR
on IPQ9574.

Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
v3: Fix patch author
    Included below information in cover letter
v2: Fix Signed-off-by order
Depends:
	[1] https://lore.kernel.org/lkml/20230217-topic-cpr3h-v14-0-9fd23241493d@linaro.org/T/
	[2] https://github.com/quic-varada/cpr/commits/konrad/
---
 drivers/pmdomain/qcom/cpr3.c | 137 +++++++++++++++++++++++++++++++++++
 1 file changed, 137 insertions(+)

Comments

Dmitry Baryshkov June 26, 2024, 6:27 p.m. UTC | #1 
On Wed, Jun 26, 2024 at 04:10:01PM GMT, Varadarajan Narayanan wrote:
> From: Praveenkumar I <quic_ipkumar@quicinc.com>
> 
> Add thread, scaling factor, CPR descriptor defines to enable CPR
> on IPQ9574.
> 
> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
> v3: Fix patch author
>     Included below information in cover letter
> v2: Fix Signed-off-by order
> Depends:
> 	[1] https://lore.kernel.org/lkml/20230217-topic-cpr3h-v14-0-9fd23241493d@linaro.org/T/
> 	[2] https://github.com/quic-varada/cpr/commits/konrad/
> ---
>  drivers/pmdomain/qcom/cpr3.c | 137 +++++++++++++++++++++++++++++++++++
>  1 file changed, 137 insertions(+)
> 
> diff --git a/drivers/pmdomain/qcom/cpr3.c b/drivers/pmdomain/qcom/cpr3.c
> index c28028be50d8..66c8a4bd9adc 100644
> --- a/drivers/pmdomain/qcom/cpr3.c
> +++ b/drivers/pmdomain/qcom/cpr3.c

> +
> +static const struct cpr_desc ipq9574_cpr_desc = {
> +	.cpr_type = CTRL_TYPE_CPR4,

So, is it CPR4 or CPRh?

> +	.num_threads = 1,
> +	.apm_threshold = 850000,
> +	.apm_crossover = 880000,
> +	.apm_hysteresis = 0,
> +	.cpr_base_voltage = 700000,
> +	.cpr_max_voltage = 1100000,
> +	.timer_delay_us = 5000,
> +	.timer_cons_up = 0,
> +	.timer_cons_down = 0,
> +	.up_threshold = 2,
> +	.down_threshold = 2,
> +	.idle_clocks = 15,
> +	.count_mode = CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN,
> +	.count_repeat = 1,
> +	.gcnt_us = 1,
> +	.vreg_step_fixed = 12500,
> +	.vreg_step_up_limit = 1,
> +	.vreg_step_down_limit = 1,
> +	.vdd_settle_time_us = 34,
> +	.corner_settle_time_us = 6,
> +	.reduce_to_corner_uV = true,
> +	.hw_closed_loop_en = false,
> +	.threads = (const struct cpr_thread_desc *[]) {
> +		&ipq9574_thread_silver,

If it's silver, where is gold or bronze?

> +	},
> +};
> +
> +static const struct cpr_acc_desc ipq9574_cpr_acc_desc = {
> +	.cpr_desc = &ipq9574_cpr_desc,
> +};
> +
>  static const int sdm630_gold_scaling_factor[][CPR3_RO_COUNT] = {
>  	/* Same RO factors for all fuse corners */
>  	{
> @@ -2828,6 +2964,7 @@ static void cpr_remove(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id cpr3_match_table[] = {
> +	{ .compatible = "qcom,ipq9574-cprh", .data = &ipq9574_cpr_acc_desc },
>  	{ .compatible = "qcom,msm8998-cprh", .data = &msm8998_cpr_acc_desc },
>  	{ .compatible = "qcom,sdm630-cprh", .data = &sdm630_cpr_acc_desc },
>  	{ }
> -- 
> 2.34.1
>
Varadarajan Narayanan June 27, 2024, 7:23 a.m. UTC | #2 
On Wed, Jun 26, 2024 at 09:27:53PM +0300, Dmitry Baryshkov wrote:
> On Wed, Jun 26, 2024 at 04:10:01PM GMT, Varadarajan Narayanan wrote:
> > From: Praveenkumar I <quic_ipkumar@quicinc.com>
> >
> > Add thread, scaling factor, CPR descriptor defines to enable CPR
> > on IPQ9574.
> >
> > Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> > ---
> > v3: Fix patch author
> >     Included below information in cover letter
> > v2: Fix Signed-off-by order
> > Depends:
> > 	[1] https://lore.kernel.org/lkml/20230217-topic-cpr3h-v14-0-9fd23241493d@linaro.org/T/
> > 	[2] https://github.com/quic-varada/cpr/commits/konrad/
> > ---
> >  drivers/pmdomain/qcom/cpr3.c | 137 +++++++++++++++++++++++++++++++++++
> >  1 file changed, 137 insertions(+)
> >
> > diff --git a/drivers/pmdomain/qcom/cpr3.c b/drivers/pmdomain/qcom/cpr3.c
> > index c28028be50d8..66c8a4bd9adc 100644
> > --- a/drivers/pmdomain/qcom/cpr3.c
> > +++ b/drivers/pmdomain/qcom/cpr3.c
>
> > +
> > +static const struct cpr_desc ipq9574_cpr_desc = {
> > +	.cpr_type = CTRL_TYPE_CPR4,
>
> So, is it CPR4 or CPRh?

CPR4.

> > +	.num_threads = 1,
> > +	.apm_threshold = 850000,
> > +	.apm_crossover = 880000,
> > +	.apm_hysteresis = 0,
> > +	.cpr_base_voltage = 700000,
> > +	.cpr_max_voltage = 1100000,
> > +	.timer_delay_us = 5000,
> > +	.timer_cons_up = 0,
> > +	.timer_cons_down = 0,
> > +	.up_threshold = 2,
> > +	.down_threshold = 2,
> > +	.idle_clocks = 15,
> > +	.count_mode = CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN,
> > +	.count_repeat = 1,
> > +	.gcnt_us = 1,
> > +	.vreg_step_fixed = 12500,
> > +	.vreg_step_up_limit = 1,
> > +	.vreg_step_down_limit = 1,
> > +	.vdd_settle_time_us = 34,
> > +	.corner_settle_time_us = 6,
> > +	.reduce_to_corner_uV = true,
> > +	.hw_closed_loop_en = false,
> > +	.threads = (const struct cpr_thread_desc *[]) {
> > +		&ipq9574_thread_silver,
>
> If it's silver, where is gold or bronze?

Will rename this as "ipq9574_thread"

Thanks
Varada

> > +	},
> > +};
> > +
> > +static const struct cpr_acc_desc ipq9574_cpr_acc_desc = {
> > +	.cpr_desc = &ipq9574_cpr_desc,
> > +};
> > +
> >  static const int sdm630_gold_scaling_factor[][CPR3_RO_COUNT] = {
> >  	/* Same RO factors for all fuse corners */
> >  	{
> > @@ -2828,6 +2964,7 @@ static void cpr_remove(struct platform_device *pdev)
> >  }
> >
> >  static const struct of_device_id cpr3_match_table[] = {
> > +	{ .compatible = "qcom,ipq9574-cprh", .data = &ipq9574_cpr_acc_desc },
> >  	{ .compatible = "qcom,msm8998-cprh", .data = &msm8998_cpr_acc_desc },
> >  	{ .compatible = "qcom,sdm630-cprh", .data = &sdm630_cpr_acc_desc },
> >  	{ }
> > --
> > 2.34.1
> >
>
> --
> With best wishes
> Dmitry
Dmitry Baryshkov June 27, 2024, 1:46 p.m. UTC | #3 
On Thu, Jun 27, 2024 at 12:53:18PM GMT, Varadarajan Narayanan wrote:
> On Wed, Jun 26, 2024 at 09:27:53PM +0300, Dmitry Baryshkov wrote:
> > On Wed, Jun 26, 2024 at 04:10:01PM GMT, Varadarajan Narayanan wrote:
> > > From: Praveenkumar I <quic_ipkumar@quicinc.com>
> > >
> > > Add thread, scaling factor, CPR descriptor defines to enable CPR
> > > on IPQ9574.
> > >
> > > Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> > > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> > > ---
> > > v3: Fix patch author
> > >     Included below information in cover letter
> > > v2: Fix Signed-off-by order
> > > Depends:
> > > 	[1] https://lore.kernel.org/lkml/20230217-topic-cpr3h-v14-0-9fd23241493d@linaro.org/T/
> > > 	[2] https://github.com/quic-varada/cpr/commits/konrad/
> > > ---
> > >  drivers/pmdomain/qcom/cpr3.c | 137 +++++++++++++++++++++++++++++++++++
> > >  1 file changed, 137 insertions(+)
> > >
> > > diff --git a/drivers/pmdomain/qcom/cpr3.c b/drivers/pmdomain/qcom/cpr3.c
> > > index c28028be50d8..66c8a4bd9adc 100644
> > > --- a/drivers/pmdomain/qcom/cpr3.c
> > > +++ b/drivers/pmdomain/qcom/cpr3.c
> >
> > > +
> > > +static const struct cpr_desc ipq9574_cpr_desc = {
> > > +	.cpr_type = CTRL_TYPE_CPR4,
> >
> > So, is it CPR4 or CPRh?
> 
> CPR4.

Then why do you have cprh in the compatible?

> 
> > > +	.num_threads = 1,
> > > +	.apm_threshold = 850000,
> > > +	.apm_crossover = 880000,
> > > +	.apm_hysteresis = 0,
> > > +	.cpr_base_voltage = 700000,
> > > +	.cpr_max_voltage = 1100000,
> > > +	.timer_delay_us = 5000,
> > > +	.timer_cons_up = 0,
> > > +	.timer_cons_down = 0,
> > > +	.up_threshold = 2,
> > > +	.down_threshold = 2,
> > > +	.idle_clocks = 15,
> > > +	.count_mode = CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN,
> > > +	.count_repeat = 1,
> > > +	.gcnt_us = 1,
> > > +	.vreg_step_fixed = 12500,
> > > +	.vreg_step_up_limit = 1,
> > > +	.vreg_step_down_limit = 1,
> > > +	.vdd_settle_time_us = 34,
> > > +	.corner_settle_time_us = 6,
> > > +	.reduce_to_corner_uV = true,
> > > +	.hw_closed_loop_en = false,
> > > +	.threads = (const struct cpr_thread_desc *[]) {
> > > +		&ipq9574_thread_silver,
> >
> > If it's silver, where is gold or bronze?
> 
> Will rename this as "ipq9574_thread"
> 
> Thanks
> Varada
> 
> > > +	},
> > > +};
> > > +
> > > +static const struct cpr_acc_desc ipq9574_cpr_acc_desc = {
> > > +	.cpr_desc = &ipq9574_cpr_desc,
> > > +};
> > > +
> > >  static const int sdm630_gold_scaling_factor[][CPR3_RO_COUNT] = {
> > >  	/* Same RO factors for all fuse corners */
> > >  	{
> > > @@ -2828,6 +2964,7 @@ static void cpr_remove(struct platform_device *pdev)
> > >  }
> > >
> > >  static const struct of_device_id cpr3_match_table[] = {
> > > +	{ .compatible = "qcom,ipq9574-cprh", .data = &ipq9574_cpr_acc_desc },
> > >  	{ .compatible = "qcom,msm8998-cprh", .data = &msm8998_cpr_acc_desc },
> > >  	{ .compatible = "qcom,sdm630-cprh", .data = &sdm630_cpr_acc_desc },
> > >  	{ }
> > > --
> > > 2.34.1
> > >
> >
> > --
> > With best wishes
> > Dmitry
Varadarajan Narayanan June 28, 2024, 11:53 a.m. UTC | #4 
On Thu, Jun 27, 2024 at 04:46:05PM +0300, Dmitry Baryshkov wrote:
> On Thu, Jun 27, 2024 at 12:53:18PM GMT, Varadarajan Narayanan wrote:
> > On Wed, Jun 26, 2024 at 09:27:53PM +0300, Dmitry Baryshkov wrote:
> > > On Wed, Jun 26, 2024 at 04:10:01PM GMT, Varadarajan Narayanan wrote:
> > > > From: Praveenkumar I <quic_ipkumar@quicinc.com>
> > > >
> > > > Add thread, scaling factor, CPR descriptor defines to enable CPR
> > > > on IPQ9574.
> > > >
> > > > Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> > > > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> > > > ---
> > > > v3: Fix patch author
> > > >     Included below information in cover letter
> > > > v2: Fix Signed-off-by order
> > > > Depends:
> > > > 	[1] https://lore.kernel.org/lkml/20230217-topic-cpr3h-v14-0-9fd23241493d@linaro.org/T/
> > > > 	[2] https://github.com/quic-varada/cpr/commits/konrad/
> > > > ---
> > > >  drivers/pmdomain/qcom/cpr3.c | 137 +++++++++++++++++++++++++++++++++++
> > > >  1 file changed, 137 insertions(+)
> > > >
> > > > diff --git a/drivers/pmdomain/qcom/cpr3.c b/drivers/pmdomain/qcom/cpr3.c
> > > > index c28028be50d8..66c8a4bd9adc 100644
> > > > --- a/drivers/pmdomain/qcom/cpr3.c
> > > > +++ b/drivers/pmdomain/qcom/cpr3.c
> > >
> > > > +
> > > > +static const struct cpr_desc ipq9574_cpr_desc = {
> > > > +	.cpr_type = CTRL_TYPE_CPR4,
> > >
> > > So, is it CPR4 or CPRh?
> >
> > CPR4.
>
> Then why do you have cprh in the compatible?

Sorry, copy-paste from msm8998. Will fix that in the next version.

Thanks
Varada

> > > > +	.num_threads = 1,
> > > > +	.apm_threshold = 850000,
> > > > +	.apm_crossover = 880000,
> > > > +	.apm_hysteresis = 0,
> > > > +	.cpr_base_voltage = 700000,
> > > > +	.cpr_max_voltage = 1100000,
> > > > +	.timer_delay_us = 5000,
> > > > +	.timer_cons_up = 0,
> > > > +	.timer_cons_down = 0,
> > > > +	.up_threshold = 2,
> > > > +	.down_threshold = 2,
> > > > +	.idle_clocks = 15,
> > > > +	.count_mode = CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN,
> > > > +	.count_repeat = 1,
> > > > +	.gcnt_us = 1,
> > > > +	.vreg_step_fixed = 12500,
> > > > +	.vreg_step_up_limit = 1,
> > > > +	.vreg_step_down_limit = 1,
> > > > +	.vdd_settle_time_us = 34,
> > > > +	.corner_settle_time_us = 6,
> > > > +	.reduce_to_corner_uV = true,
> > > > +	.hw_closed_loop_en = false,
> > > > +	.threads = (const struct cpr_thread_desc *[]) {
> > > > +		&ipq9574_thread_silver,
> > >
> > > If it's silver, where is gold or bronze?
> >
> > Will rename this as "ipq9574_thread"
> >
> > Thanks
> > Varada
> >
> > > > +	},
> > > > +};
> > > > +
> > > > +static const struct cpr_acc_desc ipq9574_cpr_acc_desc = {
> > > > +	.cpr_desc = &ipq9574_cpr_desc,
> > > > +};
> > > > +
> > > >  static const int sdm630_gold_scaling_factor[][CPR3_RO_COUNT] = {
> > > >  	/* Same RO factors for all fuse corners */
> > > >  	{
> > > > @@ -2828,6 +2964,7 @@ static void cpr_remove(struct platform_device *pdev)
> > > >  }
> > > >
> > > >  static const struct of_device_id cpr3_match_table[] = {
> > > > +	{ .compatible = "qcom,ipq9574-cprh", .data = &ipq9574_cpr_acc_desc },
> > > >  	{ .compatible = "qcom,msm8998-cprh", .data = &msm8998_cpr_acc_desc },
> > > >  	{ .compatible = "qcom,sdm630-cprh", .data = &sdm630_cpr_acc_desc },
> > > >  	{ }
> > > > --
> > > > 2.34.1
> > > >
> > >
> > > --
> > > With best wishes
> > > Dmitry
>
> --
> With best wishes
> Dmitry
diff mbox series

Patch

diff --git a/drivers/pmdomain/qcom/cpr3.c b/drivers/pmdomain/qcom/cpr3.c
index c28028be50d8..66c8a4bd9adc 100644
--- a/drivers/pmdomain/qcom/cpr3.c
+++ b/drivers/pmdomain/qcom/cpr3.c
@@ -2056,6 +2056,142 @@  static const struct cpr_acc_desc msm8998_cpr_acc_desc = {
 	.cpr_desc = &msm8998_cpr_desc,
 };
 
+static const int ipq9574_silver_scaling_factor[][CPR3_RO_COUNT] = {
+	/* Fuse Corner 0 */
+	{
+		2383, 2112, 2250, 1502, 2269, 2055, 2046, 1949,
+		2128, 1945, 2282, 2061, 2010, 2216, 2054, 2332
+	},
+	/* Fuse Corner 1 */
+	{
+		2383, 2112, 2250, 1502, 2269, 2055, 2046, 1949,
+		2128, 1945, 2282, 2061, 2010, 2216, 2054, 2332
+	},
+	/* Fuse Corner 2 */
+	{
+		2383, 2112, 2250, 1502, 2269, 2055, 2046, 1949,
+		2128, 1945, 2282, 2061, 2010, 2216, 2054, 2332
+	},
+	/* Fuse Corner 3 */
+	{
+		2383, 2112, 2250, 1502, 2269, 2055, 2046, 1949,
+		2128, 1945, 2282, 2061, 2010, 2216, 2054, 2332
+	},
+};
+
+static const struct cpr_thread_desc ipq9574_thread_silver = {
+	.controller_id = 0,
+	.hw_tid = 0,
+	.ro_scaling_factor = ipq9574_silver_scaling_factor,
+	.sensor_range_start = 0,
+	.sensor_range_end = 6,
+	.init_voltage_step = 10000,
+	.init_voltage_width = 6,
+	.step_quot_init_min = 0,
+	.step_quot_init_max = 15,
+	.num_fuse_corners = 4,
+	.fuse_corner_data = (struct fuse_corner_data[]){
+		/* fuse corner 0 */
+		{
+			.ref_uV = 725000,
+			.max_uV = 725000,
+			.min_uV = 725000,
+			.range_uV = 0,
+			.volt_cloop_adjust = 0,
+			.volt_oloop_adjust = 0,
+			.max_volt_scale = 4,
+			.max_quot_scale = 10,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+		},
+		/* fuse corner 1 */
+		{
+			.ref_uV = 862500,
+			.max_uV = 862500,
+			.min_uV = 725000,
+			.range_uV = 0,
+			.volt_cloop_adjust = 0,
+			.volt_oloop_adjust = 0,
+			.max_volt_scale = 500,
+			.max_quot_scale = 800,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+		},
+		/* fuse corner 2 */
+		{
+			.ref_uV = 987500,
+			.max_uV = 987500,
+			.min_uV = 787500,
+			.range_uV = 0,
+			.volt_cloop_adjust = 0,
+			.volt_oloop_adjust = 0,
+			.max_volt_scale = 280,
+			.max_quot_scale = 650,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+
+		},
+		/* fuse corner 3 */
+		{
+			.ref_uV = 1062500,
+			.max_uV = 1062500,
+			.min_uV = 850000,
+			.range_uV = 0,
+			.volt_cloop_adjust = 0,
+			.volt_oloop_adjust = 0,
+			.max_volt_scale = 430,
+			.max_quot_scale = 800,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+		},
+	},
+};
+
+static const struct cpr_desc ipq9574_cpr_desc = {
+	.cpr_type = CTRL_TYPE_CPR4,
+	.num_threads = 1,
+	.apm_threshold = 850000,
+	.apm_crossover = 880000,
+	.apm_hysteresis = 0,
+	.cpr_base_voltage = 700000,
+	.cpr_max_voltage = 1100000,
+	.timer_delay_us = 5000,
+	.timer_cons_up = 0,
+	.timer_cons_down = 0,
+	.up_threshold = 2,
+	.down_threshold = 2,
+	.idle_clocks = 15,
+	.count_mode = CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN,
+	.count_repeat = 1,
+	.gcnt_us = 1,
+	.vreg_step_fixed = 12500,
+	.vreg_step_up_limit = 1,
+	.vreg_step_down_limit = 1,
+	.vdd_settle_time_us = 34,
+	.corner_settle_time_us = 6,
+	.reduce_to_corner_uV = true,
+	.hw_closed_loop_en = false,
+	.threads = (const struct cpr_thread_desc *[]) {
+		&ipq9574_thread_silver,
+	},
+};
+
+static const struct cpr_acc_desc ipq9574_cpr_acc_desc = {
+	.cpr_desc = &ipq9574_cpr_desc,
+};
+
 static const int sdm630_gold_scaling_factor[][CPR3_RO_COUNT] = {
 	/* Same RO factors for all fuse corners */
 	{
@@ -2828,6 +2964,7 @@  static void cpr_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id cpr3_match_table[] = {
+	{ .compatible = "qcom,ipq9574-cprh", .data = &ipq9574_cpr_acc_desc },
 	{ .compatible = "qcom,msm8998-cprh", .data = &msm8998_cpr_acc_desc },
 	{ .compatible = "qcom,sdm630-cprh", .data = &sdm630_cpr_acc_desc },
 	{ }