diff mbox series

[v9,3/8] remoteproc: qcom: Add support for split q6 + m3 wlan firmware

Message ID 20240621114659.2958170-4-quic_gokulsri@quicinc.com (mailing list archive)
State New
Headers show
Series remoteproc: qcom: q6v5-wcss: Add support for secure pil | expand

Commit Message

Gokul Sriram Palanisamy June 21, 2024, 11:46 a.m. UTC
IPQ8074 supports split firmware for q6 and m3 as well.
So add support for loading the m3 firmware before q6.
Now the drivers works fine for both split and unified
firmwares.

Signed-off-by: Nikhil Prakash V <quic_nprakash@quicinc.com>
Signed-off-by: Sricharan R <quic_srichara@quicinc.com>
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
---
 drivers/remoteproc/qcom_q6v5_wcss.c | 33 +++++++++++++++++++++++++----
 1 file changed, 29 insertions(+), 4 deletions(-)

Comments

Dmitry Baryshkov June 27, 2024, 11:11 a.m. UTC | #1
On Fri, Jun 21, 2024 at 05:16:54PM GMT, Gokul Sriram Palanisamy wrote:
> IPQ8074 supports split firmware for q6 and m3 as well.
> So add support for loading the m3 firmware before q6.
> Now the drivers works fine for both split and unified
> firmwares.

Right now linux-firmware ships both q6 and m3 firmware files. The driver
loads just the q6 firmware. Is it enough for the hardware to get working
WiFi?

> 
> Signed-off-by: Nikhil Prakash V <quic_nprakash@quicinc.com>
> Signed-off-by: Sricharan R <quic_srichara@quicinc.com>
> Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>

Who is the original author of the patch?

> ---
>  drivers/remoteproc/qcom_q6v5_wcss.c | 33 +++++++++++++++++++++++++----
>  1 file changed, 29 insertions(+), 4 deletions(-)
>
diff mbox series

Patch

diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
index e45e79d80238..d8b79765d5c6 100644
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -139,6 +139,7 @@  struct q6v5_wcss {
 	u32 version;
 	bool requires_force_stop;
 	bool need_mem_protection;
+	const char *m3_firmware_name;
 
 	struct qcom_rproc_glink glink_subdev;
 	struct qcom_rproc_ssr ssr_subdev;
@@ -147,7 +148,8 @@  struct q6v5_wcss {
 struct wcss_data {
 	int (*init_clock)(struct q6v5_wcss *wcss);
 	int (*init_regulator)(struct q6v5_wcss *wcss);
-	const char *firmware_name;
+	const char *q6_firmware_name;
+	const char *m3_firmware_name;
 	unsigned int crash_reason_smem;
 	u32 version;
 	bool aon_reset_required;
@@ -789,8 +791,29 @@  static void *q6v5_wcss_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *i
 static int q6v5_wcss_load(struct rproc *rproc, const struct firmware *fw)
 {
 	struct q6v5_wcss *wcss = rproc->priv;
+	const struct firmware *m3_fw;
 	int ret;
 
+	if (wcss->m3_firmware_name) {
+		ret = request_firmware(&m3_fw, wcss->m3_firmware_name,
+				       wcss->dev);
+		if (ret)
+			goto skip_m3;
+
+		ret = qcom_mdt_load_no_init(wcss->dev, m3_fw,
+					    wcss->m3_firmware_name, 0,
+					    wcss->mem_region, wcss->mem_phys,
+					    wcss->mem_size, &wcss->mem_reloc);
+
+		release_firmware(m3_fw);
+
+		if (ret) {
+			dev_err(wcss->dev, "can't load m3_fw.bXX\n");
+			return ret;
+		}
+	}
+
+skip_m3:
 	if (wcss->need_mem_protection)
 		ret = qcom_mdt_load(wcss->dev, fw, rproc->firmware,
 				    WCNSS_PAS_ID, wcss->mem_region,
@@ -1071,7 +1094,7 @@  static int q6v5_wcss_probe(struct platform_device *pdev)
 		return -EPROBE_DEFER;
 
 	rproc = devm_rproc_alloc(&pdev->dev, pdev->name, desc->ops,
-				 desc->firmware_name, sizeof(*wcss));
+				 desc->q6_firmware_name, sizeof(*wcss));
 	if (!rproc) {
 		dev_err(&pdev->dev, "failed to allocate rproc\n");
 		return -ENOMEM;
@@ -1084,6 +1107,7 @@  static int q6v5_wcss_probe(struct platform_device *pdev)
 	wcss->version = desc->version;
 	wcss->requires_force_stop = desc->requires_force_stop;
 	wcss->need_mem_protection = desc->need_mem_protection;
+	wcss->m3_firmware_name = desc->m3_firmware_name;
 
 	ret = q6v5_wcss_init_mmio(wcss, pdev);
 	if (ret)
@@ -1141,7 +1165,8 @@  static void q6v5_wcss_remove(struct platform_device *pdev)
 
 static const struct wcss_data wcss_ipq8074_res_init = {
 	.init_clock = ipq8074_init_clock,
-	.firmware_name = "IPQ8074/q6_fw.mdt",
+	.q6_firmware_name = "IPQ8074/q6_fw.mdt",
+	.m3_firmware_name = "IPQ8074/m3_fw.mdt",
 	.crash_reason_smem = WCSS_CRASH_REASON,
 	.aon_reset_required = true,
 	.wcss_q6_reset_required = true,
@@ -1154,7 +1179,7 @@  static const struct wcss_data wcss_qcs404_res_init = {
 	.init_clock = qcs404_init_clock,
 	.init_regulator = qcs404_init_regulator,
 	.crash_reason_smem = WCSS_CRASH_REASON,
-	.firmware_name = "wcnss.mdt",
+	.q6_firmware_name = "wcnss.mdt",
 	.version = WCSS_QCS404,
 	.aon_reset_required = false,
 	.wcss_q6_reset_required = false,