| Message ID | 20240628010715.438471-6-alexey.klimov@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | qrb4210-rb2: add HDMI audio playback support | expand |
On 28/06/2024 03:07, Alexey Klimov wrote: > Add the Low Power Audio SubSystem Low Power Island (LPASS LPI) > pin controller device node required for audio subsystem on > Qualcomm QRB4210 RB2. > > Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> > gcc: clock-controller@1400000 { > compatible = "qcom,gcc-sm6115"; > reg = <0x0 0x01400000 0x0 0x1f0000>; > @@ -3068,6 +3084,9 @@ cpufreq_hw: cpufreq@f521000 { > }; > }; > > + sound: sound { > + }; That's not really needed and does not bring much of benefits. Best regards, Krzysztof
On Fri, Jun 28, 2024 at 02:07:13AM GMT, Alexey Klimov wrote: > Add the Low Power Audio SubSystem Low Power Island (LPASS LPI) > pin controller device node required for audio subsystem on > Qualcomm QRB4210 RB2. > > Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm6115.dtsi | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi > index c49aca3d0772..3a9fb1780c90 100644 > --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi > @@ -15,6 +15,7 @@ > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/power/qcom-rpmpd.h> > #include <dt-bindings/soc/qcom,apr.h> > +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> > #include <dt-bindings/thermal/thermal.h> > > / { > @@ -809,6 +810,21 @@ data-pins { > }; > }; > > + lpass_tlmm: pinctrl@a7c0000 { > + compatible = "qcom,sm4250-lpass-lpi-pinctrl"; Is it so? Or should it be qcom,sm6115-lpass-lpi-pinctrl instead? > + reg = <0x0 0xa7c0000 0x0 0x20000>, > + <0x0 0xa950000 0x0 0x10000>; > + > + clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; > + clock-names = "audio"; > + > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&lpass_tlmm 0 0 26>; > + > + status = "disabled"; > + }; > + > gcc: clock-controller@1400000 { > compatible = "qcom,gcc-sm6115"; > reg = <0x0 0x01400000 0x0 0x1f0000>;
On 28/06/2024 09:43, Dmitry Baryshkov wrote: > On Fri, Jun 28, 2024 at 02:07:13AM GMT, Alexey Klimov wrote: >> Add the Low Power Audio SubSystem Low Power Island (LPASS LPI) >> pin controller device node required for audio subsystem on >> Qualcomm QRB4210 RB2. >> >> Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> >> --- >> arch/arm64/boot/dts/qcom/sm6115.dtsi | 19 +++++++++++++++++++ >> 1 file changed, 19 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi >> index c49aca3d0772..3a9fb1780c90 100644 >> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi >> @@ -15,6 +15,7 @@ >> #include <dt-bindings/interrupt-controller/arm-gic.h> >> #include <dt-bindings/power/qcom-rpmpd.h> >> #include <dt-bindings/soc/qcom,apr.h> >> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> >> #include <dt-bindings/thermal/thermal.h> >> >> / { >> @@ -809,6 +810,21 @@ data-pins { >> }; >> }; >> >> + lpass_tlmm: pinctrl@a7c0000 { >> + compatible = "qcom,sm4250-lpass-lpi-pinctrl"; > > Is it so? Or should it be qcom,sm6115-lpass-lpi-pinctrl instead? Eh, now I am confused as well... There was so much talk about Srini's patchset that I assumed it is the same device. Why were you testing sm4250? Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index c49aca3d0772..3a9fb1780c90 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,apr.h> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> #include <dt-bindings/thermal/thermal.h> / { @@ -809,6 +810,21 @@ data-pins { }; }; + lpass_tlmm: pinctrl@a7c0000 { + compatible = "qcom,sm4250-lpass-lpi-pinctrl"; + reg = <0x0 0xa7c0000 0x0 0x20000>, + <0x0 0xa950000 0x0 0x10000>; + + clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 26>; + + status = "disabled"; + }; + gcc: clock-controller@1400000 { compatible = "qcom,gcc-sm6115"; reg = <0x0 0x01400000 0x0 0x1f0000>; @@ -3068,6 +3084,9 @@ cpufreq_hw: cpufreq@f521000 { }; }; + sound: sound { + }; + thermal-zones { mapss-thermal { polling-delay-passive = <0>;
Add the Low Power Audio SubSystem Low Power Island (LPASS LPI) pin controller device node required for audio subsystem on Qualcomm QRB4210 RB2. Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> --- arch/arm64/boot/dts/qcom/sm6115.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)