| Message ID | 20240626201502.1384123-3-jonas@kwiboo.se (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: rockchip: Add Radxa ROCK 3B | expand |
Hi, thank you very much for your effort! On 6/27/24 05:14, Jonas Karlman wrote: > The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form > factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community > version based on the RK3568 SoC and an industrial version based on the > RK3568J SoC. > > Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB. > > Signed-off-by: Jonas Karlman <jonas@kwiboo.se> > --- > v2: > - Use regulator-.* nodename for fixed regulators > - Drop rockchip,mic-in-differential prop > - Shorten Ethernet phy reset-deassert-us to 50 ms > - Fix pcie pinctrl > - Add keep-power-in-suspend to sdmmc2 > > Following issue is reported by dtbs_check and is fixed by series at [1]: > > pmic@20: '#sound-dai-cells', 'assigned-clock-parents', 'assigned-clocks', 'clock-names', 'clocks' > do not match any of the regexes: 'pinctrl-[0-9]+' > from schema $id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml# > > [1] https://lore.kernel.org/all/20240622-rk809-fixes-v2-0-c0db420d3639@collabora.com/ > --- > arch/arm64/boot/dts/rockchip/Makefile | 1 + > .../boot/dts/rockchip/rk3568-rock-3b.dts | 780 ++++++++++++++++++ > 2 files changed, 781 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts > > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile > index 90f5172f37e6..ae0ae02f51e9 100644 > --- a/arch/arm64/boot/dts/rockchip/Makefile > +++ b/arch/arm64/boot/dts/rockchip/Makefile > @@ -114,6 +114,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts433.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3b.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo > diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts > new file mode 100644 > index 000000000000..46c959f1c6ad > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts > @@ -0,0 +1,780 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/leds/common.h> > +#include <dt-bindings/pinctrl/rockchip.h> > +#include <dt-bindings/soc/rockchip,vop2.h> > +#include "rk3568.dtsi" > + > +/ { > + model = "Radxa ROCK 3B"; > + compatible = "radxa,rock-3b", "rockchip,rk3568"; > + > + aliases { > + ethernet0 = &gmac0; > + ethernet1 = &gmac1; > + mmc0 = &sdhci; > + mmc1 = &sdmmc0; > + mmc2 = &sdmmc2; > + }; > + > + chosen { > + stdout-path = "serial2:1500000n8"; > + }; > + > + hdmi-con { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_con_in: endpoint { > + remote-endpoint = <&hdmi_out_con>; > + }; > + }; > + }; > + > + ir-receiver { > + compatible = "gpio-ir-receiver"; > + gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pwm3_ir>; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + led-green { led-0 or just led (leds-gpio.yaml) Best regards, -- FUKAUMI Naoki Radxa Computer (Shenzhen) Co., Ltd. > + color = <LED_COLOR_ID_GREEN>; > + default-state = "on"; > + function = LED_FUNCTION_HEARTBEAT; > + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + pinctrl-names = "default"; > + pinctrl-0 = <&led>; > + }; > + }; > + > + /* pi6c pcie clock generator */ > + vcc3v3_pi6c_03: regulator-3v3-vcc-pi6c-03 { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie_pwren_h>; > + regulator-name = "vcc3v3_pi6c_03"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + startup-delay-us = <10000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc3v3_sys: regulator-3v3-vcc-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc3v3_sys2: regulator-3v3-vcc-sys2 { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_sys2"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc5v0_sys: regulator-5v0-vcc-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + vcc5v0_usb_host: regulator-5v0-vcc-usb-host { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb_host_pwren_h>; > + regulator-name = "vcc5v0_usb_host"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc5v0_usb_otg: regulator-5v0-vcc-usb-otg { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb_otg_pwren_h>; > + regulator-name = "vcc5v0_usb_otg"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + clocks = <&rk809 1>; > + clock-names = "ext_clock"; > + pinctrl-names = "default"; > + pinctrl-0 = <&wifi_reg_on_h>; > + post-power-on-delay-ms = <100>; > + power-off-delay-us = <5000000>; > + reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; > + }; > + > + sound { > + compatible = "simple-audio-card"; > + simple-audio-card,format = "i2s"; > + simple-audio-card,name = "Analog RK809"; > + simple-audio-card,mclk-fs = <256>; > + > + simple-audio-card,cpu { > + sound-dai = <&i2s1_8ch>; > + }; > + > + simple-audio-card,codec { > + sound-dai = <&rk809>; > + }; > + }; > +}; > + > +&combphy0 { > + status = "okay"; > +}; > + > +&combphy1 { > + status = "okay"; > +}; > + > +&combphy2 { > + status = "okay"; > +}; > + > +&cpu0 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&cpu1 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&cpu2 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&cpu3 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&gmac0 { > + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; > + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; > + clock_in_out = "input"; > + phy-handle = <&rgmii_phy0>; > + phy-mode = "rgmii-id"; > + phy-supply = <&vcc_3v3>; > + pinctrl-names = "default"; > + pinctrl-0 = <&gmac0_miim > + &gmac0_tx_bus2 > + &gmac0_rx_bus2 > + &gmac0_rgmii_clk > + &gmac0_rgmii_bus > + &gmac0_clkinout>; > + status = "okay"; > +}; > + > +&gmac1 { > + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; > + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; > + clock_in_out = "input"; > + phy-handle = <&rgmii_phy1>; > + phy-mode = "rgmii-id"; > + phy-supply = <&vcc_3v3>; > + pinctrl-names = "default"; > + pinctrl-0 = <&gmac1m1_miim > + &gmac1m1_tx_bus2 > + &gmac1m1_rx_bus2 > + &gmac1m1_rgmii_clk > + &gmac1m1_rgmii_bus > + &gmac1m1_clkinout>; > + status = "okay"; > +}; > + > +&gpu { > + mali-supply = <&vdd_gpu>; > + status = "okay"; > +}; > + > +&hdmi { > + avdd-0v9-supply = <&vdda0v9_image>; > + avdd-1v8-supply = <&vcca1v8_image>; > + status = "okay"; > +}; > + > +&hdmi_in { > + hdmi_in_vp0: endpoint { > + remote-endpoint = <&vp0_out_hdmi>; > + }; > +}; > + > +&hdmi_out { > + hdmi_out_con: endpoint { > + remote-endpoint = <&hdmi_con_in>; > + }; > +}; > + > +&hdmi_sound { > + status = "okay"; > +}; > + > +&i2c0 { > + status = "okay"; > + > + vdd_cpu: regulator@1c { > + compatible = "tcs,tcs4525"; > + reg = <0x1c>; > + fcs,suspend-voltage-selector = <1>; > + regulator-name = "vdd_cpu"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1150000>; > + regulator-ramp-delay = <2300>; > + vin-supply = <&vcc5v0_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + rk809: pmic@20 { > + compatible = "rockchip,rk809"; > + reg = <0x20>; > + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; > + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; > + #clock-cells = <1>; > + clocks = <&cru I2S1_MCLKOUT_TX>; > + clock-names = "mclk"; > + clock-output-names = "rk809-clkout1", "rk809-clkout2"; > + interrupt-parent = <&gpio0>; > + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; > + #sound-dai-cells = <0>; > + system-power-controller; > + wakeup-source; > + > + vcc1-supply = <&vcc3v3_sys>; > + vcc2-supply = <&vcc3v3_sys>; > + vcc3-supply = <&vcc3v3_sys>; > + vcc4-supply = <&vcc3v3_sys>; > + vcc5-supply = <&vcc3v3_sys>; > + vcc6-supply = <&vcc3v3_sys>; > + vcc7-supply = <&vcc3v3_sys>; > + vcc8-supply = <&vcc3v3_sys>; > + vcc9-supply = <&vcc3v3_sys>; > + > + regulators { > + vdd_logic: DCDC_REG1 { > + regulator-name = "vdd_logic"; > + regulator-always-on; > + regulator-boot-on; > + regulator-initial-mode = <0x2>; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_gpu: DCDC_REG2 { > + regulator-name = "vdd_gpu"; > + regulator-always-on; > + regulator-boot-on; > + regulator-initial-mode = <0x2>; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_ddr: DCDC_REG3 { > + regulator-name = "vcc_ddr"; > + regulator-always-on; > + regulator-boot-on; > + regulator-initial-mode = <0x2>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vdd_npu: DCDC_REG4 { > + regulator-name = "vdd_npu"; > + regulator-initial-mode = <0x2>; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v8: DCDC_REG5 { > + regulator-name = "vcc_1v8"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdda0v9_image: LDO_REG1 { > + regulator-name = "vdda0v9_image"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdda_0v9: LDO_REG2 { > + regulator-name = "vdda_0v9"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdda0v9_pmu: LDO_REG3 { > + regulator-name = "vdda0v9_pmu"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <900000>; > + }; > + }; > + > + vccio_acodec: LDO_REG4 { > + regulator-name = "vccio_acodec"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vccio_sd: LDO_REG5 { > + regulator-name = "vccio_sd"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v3_pmu: LDO_REG6 { > + regulator-name = "vcc3v3_pmu"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + }; > + }; > + > + vcca_1v8: LDO_REG7 { > + regulator-name = "vcca_1v8"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcca1v8_pmu: LDO_REG8 { > + regulator-name = "vcca1v8_pmu"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcca1v8_image: LDO_REG9 { > + regulator-name = "vcca1v8_image"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_3v3: SWITCH_REG1 { > + regulator-name = "vcc_3v3"; > + regulator-always-on; > + regulator-boot-on; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v3_sd: SWITCH_REG2 { > + regulator-name = "vcc3v3_sd"; > + regulator-always-on; > + regulator-boot-on; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + }; > + }; > +}; > + > +&i2c5 { > + status = "okay"; > + > + hym8563: rtc@51 { > + compatible = "haoyu,hym8563"; > + reg = <0x51>; > + interrupt-parent = <&gpio0>; > + interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; > + #clock-cells = <0>; > + clock-output-names = "rtcic_32kout"; > + pinctrl-names = "default"; > + pinctrl-0 = <&rtcic_int_l>; > + wakeup-source; > + }; > +}; > + > +&i2s0_8ch { > + status = "okay"; > +}; > + > +&i2s1_8ch { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2s1m0_sclktx > + &i2s1m0_lrcktx > + &i2s1m0_sdi0 > + &i2s1m0_sdo0>; > + rockchip,trcm-sync-tx-only; > + status = "okay"; > +}; > + > +&mdio0 { > + rgmii_phy0: ethernet-phy@1 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <1>; > + reset-assert-us = <20000>; > + reset-deassert-us = <50000>; > + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > + }; > +}; > + > +&mdio1 { > + rgmii_phy1: ethernet-phy@1 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <1>; > + reset-assert-us = <20000>; > + reset-deassert-us = <50000>; > + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; > + }; > +}; > + > +&pcie2x1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie20m1_pins>; > + reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; > + vpcie3v3-supply = <&vcc3v3_sys2>; > + status = "okay"; > +}; > + > +&pcie30phy { > + status = "okay"; > +}; > + > +&pcie3x2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie30x2m1_pins>; > + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +&pinctrl { > + bluetooth { > + bt_reg_on_h: bt-reg-on-h { > + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + bt_wake_host_h: bt-wake-host-h { > + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + host_wake_bt_h: host-wake-bt-h { > + rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + ir-receiver { > + pwm3_ir: pwm3-ir { > + rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + leds { > + led: led { > + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + pcie { > + pcie_pwren_h: pcie-pwren-h { > + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + pcie20 { > + pcie20m1_pins: pcie20m1-pins { > + rockchip,pins = > + <2 RK_PD0 4 &pcfg_pull_none>, > + <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>, > + <2 RK_PD1 4 &pcfg_pull_none>; > + }; > + }; > + > + pcie30x2 { > + pcie30x2m1_pins: pcie30x2m1-pins { > + rockchip,pins = > + <2 RK_PD4 4 &pcfg_pull_none>, > + <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>, > + <2 RK_PD5 4 &pcfg_pull_none>; > + }; > + }; > + > + pmic { > + pmic_int_l: pmic-int-l { > + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + rtc { > + rtcic_int_l: rtcic-int-l { > + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + usb { > + usb_host_pwren_h: usb-host-pwren-h { > + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + usb_otg_pwren_h: usb-otg-pwren-h { > + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + wifi { > + wifi_reg_on_h: wifi-reg-on-h { > + rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + wifi_wake_host_h: wifi-wake-host-h { > + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > +}; > + > +&pmu_io_domains { > + pmuio1-supply = <&vcc3v3_pmu>; > + pmuio2-supply = <&vcc3v3_pmu>; > + vccio1-supply = <&vccio_acodec>; > + vccio2-supply = <&vcc_1v8>; > + vccio3-supply = <&vccio_sd>; > + vccio4-supply = <&vcc_1v8>; > + vccio5-supply = <&vcc_3v3>; > + vccio6-supply = <&vcc_1v8>; > + vccio7-supply = <&vcc_3v3>; > + status = "okay"; > +}; > + > +&saradc { > + vref-supply = <&vcca_1v8>; > + status = "okay"; > +}; > + > +&sdhci { > + bus-width = <8>; > + max-frequency = <200000000>; > + mmc-hs200-1_8v; > + non-removable; > + pinctrl-names = "default"; > + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; > + vmmc-supply = <&vcc_3v3>; > + vqmmc-supply = <&vcc_1v8>; > + status = "okay"; > +}; > + > +&sdmmc0 { > + bus-width = <4>; > + cap-sd-highspeed; > + disable-wp; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > + vmmc-supply = <&vcc3v3_sd>; > + vqmmc-supply = <&vccio_sd>; > + status = "okay"; > +}; > + > +&sdmmc2 { > + bus-width = <4>; > + cap-sd-highspeed; > + cap-sdio-irq; > + keep-power-in-suspend; > + mmc-pwrseq = <&sdio_pwrseq>; > + non-removable; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_clk &sdmmc2m0_cmd>; > + sd-uhs-sdr104; > + vmmc-supply = <&vcc3v3_sys2>; > + vqmmc-supply = <&vcc_1v8>; > + status = "disabled"; > +}; > + > +&sfc { > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; > + > + flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + spi-max-frequency = <104000000>; > + spi-rx-bus-width = <4>; > + spi-tx-bus-width = <1>; > + }; > +}; > + > +&tsadc { > + rockchip,hw-tshut-mode = <1>; > + rockchip,hw-tshut-polarity = <0>; > + status = "okay"; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&uart8 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn &uart8m0_rtsn>; > + uart-has-rtscts; > + status = "disabled"; > +}; > + > +&usb_host0_ehci { > + status = "okay"; > +}; > + > +&usb_host0_ohci { > + status = "okay"; > +}; > + > +&usb_host0_xhci { > + extcon = <&usb2phy0>; > + status = "okay"; > +}; > + > +&usb_host1_xhci { > + status = "okay"; > +}; > + > +&usb2phy0 { > + status = "okay"; > +}; > + > +&usb2phy0_host { > + phy-supply = <&vcc5v0_usb_host>; > + status = "okay"; > +}; > + > +&usb2phy0_otg { > + phy-supply = <&vcc5v0_usb_otg>; > + status = "okay"; > +}; > + > +&usb2phy1 { > + status = "okay"; > +}; > + > +&usb2phy1_otg { > + phy-supply = <&vcc5v0_usb_host>; > + status = "okay"; > +}; > + > +&vop { > + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > + status = "okay"; > +}; > + > +&vop_mmu { > + status = "okay"; > +}; > + > +&vp0 { > + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > + reg = <ROCKCHIP_VOP2_EP_HDMI0>; > + remote-endpoint = <&hdmi_in_vp0>; > + }; > +};
Hi, On 2024-06-27 00:29, FUKAUMI Naoki wrote: > Hi, > > thank you very much for your effort! > > On 6/27/24 05:14, Jonas Karlman wrote: >> The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form >> factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community >> version based on the RK3568 SoC and an industrial version based on the >> RK3568J SoC. >> >> Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB. >> >> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> >> --- >> v2: >> - Use regulator-.* nodename for fixed regulators >> - Drop rockchip,mic-in-differential prop >> - Shorten Ethernet phy reset-deassert-us to 50 ms >> - Fix pcie pinctrl >> - Add keep-power-in-suspend to sdmmc2 >> >> Following issue is reported by dtbs_check and is fixed by series at [1]: >> >> pmic@20: '#sound-dai-cells', 'assigned-clock-parents', 'assigned-clocks', 'clock-names', 'clocks' >> do not match any of the regexes: 'pinctrl-[0-9]+' >> from schema $id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml# >> >> [1] https://lore.kernel.org/all/20240622-rk809-fixes-v2-0-c0db420d3639@collabora.com/ >> --- >> arch/arm64/boot/dts/rockchip/Makefile | 1 + >> .../boot/dts/rockchip/rk3568-rock-3b.dts | 780 ++++++++++++++++++ >> 2 files changed, 781 insertions(+) >> create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts >> >> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile >> index 90f5172f37e6..ae0ae02f51e9 100644 >> --- a/arch/arm64/boot/dts/rockchip/Makefile >> +++ b/arch/arm64/boot/dts/rockchip/Makefile >> @@ -114,6 +114,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts433.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb >> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3b.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo >> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts >> new file mode 100644 >> index 000000000000..46c959f1c6ad >> --- /dev/null >> +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts >> @@ -0,0 +1,780 @@ >> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) >> + >> +/dts-v1/; >> + >> +#include <dt-bindings/gpio/gpio.h> >> +#include <dt-bindings/leds/common.h> >> +#include <dt-bindings/pinctrl/rockchip.h> >> +#include <dt-bindings/soc/rockchip,vop2.h> >> +#include "rk3568.dtsi" >> + >> +/ { >> + model = "Radxa ROCK 3B"; >> + compatible = "radxa,rock-3b", "rockchip,rk3568"; >> + >> + aliases { >> + ethernet0 = &gmac0; >> + ethernet1 = &gmac1; >> + mmc0 = &sdhci; >> + mmc1 = &sdmmc0; >> + mmc2 = &sdmmc2; >> + }; >> + >> + chosen { >> + stdout-path = "serial2:1500000n8"; >> + }; >> + >> + hdmi-con { >> + compatible = "hdmi-connector"; >> + type = "a"; >> + >> + port { >> + hdmi_con_in: endpoint { >> + remote-endpoint = <&hdmi_out_con>; >> + }; >> + }; >> + }; >> + >> + ir-receiver { >> + compatible = "gpio-ir-receiver"; >> + gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pwm3_ir>; >> + }; >> + >> + leds { >> + compatible = "gpio-leds"; >> + >> + led-green { > > led-0 or just led (leds-gpio.yaml) Thanks, I will fix in v3. Regards, Jonas > > Best regards, > > -- > FUKAUMI Naoki > Radxa Computer (Shenzhen) Co., Ltd. > [snip]
Am 27.06.24 um 00:29 schrieb FUKAUMI Naoki: > Hi, > > thank you very much for your effort! > > On 6/27/24 05:14, Jonas Karlman wrote: >> The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form >> factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community >> version based on the RK3568 SoC and an industrial version based on the >> RK3568J SoC. >> >> Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB. >> >> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> >> --- >> v2: >> - Use regulator-.* nodename for fixed regulators >> - Drop rockchip,mic-in-differential prop >> - Shorten Ethernet phy reset-deassert-us to 50 ms >> - Fix pcie pinctrl >> - Add keep-power-in-suspend to sdmmc2 >> >> Following issue is reported by dtbs_check and is fixed by series at [1]: >> >> pmic@20: '#sound-dai-cells', 'assigned-clock-parents', >> 'assigned-clocks', 'clock-names', 'clocks' >> do not match any of the regexes: 'pinctrl-[0-9]+' >> from schema $id: >> http://devicetree.org/schemas/mfd/rockchip,rk809.yaml# >> >> [1] >> https://lore.kernel.org/all/20240622-rk809-fixes-v2-0-c0db420d3639@collabora.com/ >> --- >> arch/arm64/boot/dts/rockchip/Makefile | 1 + >> .../boot/dts/rockchip/rk3568-rock-3b.dts | 780 ++++++++++++++++++ >> 2 files changed, 781 insertions(+) >> create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts >> >> diff --git a/arch/arm64/boot/dts/rockchip/Makefile >> b/arch/arm64/boot/dts/rockchip/Makefile >> index 90f5172f37e6..ae0ae02f51e9 100644 >> --- a/arch/arm64/boot/dts/rockchip/Makefile >> +++ b/arch/arm64/boot/dts/rockchip/Makefile >> @@ -114,6 +114,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts433.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb >> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3b.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo >> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts >> b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts >> new file mode 100644 >> index 000000000000..46c959f1c6ad >> --- /dev/null >> +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts >> @@ -0,0 +1,780 @@ >> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) >> + >> +/dts-v1/; >> + >> +#include <dt-bindings/gpio/gpio.h> >> +#include <dt-bindings/leds/common.h> >> +#include <dt-bindings/pinctrl/rockchip.h> >> +#include <dt-bindings/soc/rockchip,vop2.h> >> +#include "rk3568.dtsi" >> + >> +/ { >> + model = "Radxa ROCK 3B"; >> + compatible = "radxa,rock-3b", "rockchip,rk3568"; >> + >> + aliases { >> + ethernet0 = &gmac0; >> + ethernet1 = &gmac1; >> + mmc0 = &sdhci; >> + mmc1 = &sdmmc0; >> + mmc2 = &sdmmc2; >> + }; >> + >> + chosen { >> + stdout-path = "serial2:1500000n8"; >> + }; >> + >> + hdmi-con { >> + compatible = "hdmi-connector"; >> + type = "a"; >> + >> + port { >> + hdmi_con_in: endpoint { >> + remote-endpoint = <&hdmi_out_con>; >> + }; >> + }; >> + }; >> + >> + ir-receiver { >> + compatible = "gpio-ir-receiver"; >> + gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pwm3_ir>; >> + }; >> + >> + leds { >> + compatible = "gpio-leds"; >> + >> + led-green { > > led-0 or just led (leds-gpio.yaml) > That's a misinterpretation of the pattern-properties regex: The "non-preferred" part of the regex does neither have a "^" nor an "$", thus it allows all nodes names which have "led" somewhere. > Best regards, > > -- > FUKAUMI Naoki
Hi Jonas,
kernel test robot noticed the following build warnings:
[auto build test WARNING on rockchip/for-next]
[also build test WARNING on krzk/for-next krzk-dt/for-next krzk-mem-ctrl/for-next linus/master v6.10-rc5 next-20240627]
[cannot apply to robh/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Jonas-Karlman/dt-bindings-arm-rockchip-Add-Radxa-ROCK-3B/20240627-160354
base: https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next
patch link: https://lore.kernel.org/r/20240626201502.1384123-3-jonas%40kwiboo.se
patch subject: [PATCH v2 2/2] arm64: dts: rockchip: Add Radxa ROCK 3B
config: arm64-randconfig-051-20240628 (https://download.01.org/0day-ci/archive/20240628/202406280948.sZf64ONz-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 13.2.0
dtschema version: 2024.6.dev2+g3b69bad
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240628/202406280948.sZf64ONz-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202406280948.sZf64ONz-lkp@intel.com/
dtcheck warnings: (new ones prefixed by >>)
>> arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dtb: pmic@20: '#sound-dai-cells', 'assigned-clock-parents', 'assigned-clocks', 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml#
Hi Jonas,
kernel test robot noticed the following build warnings:
[auto build test WARNING on rockchip/for-next]
[also build test WARNING on krzk/for-next krzk-dt/for-next krzk-mem-ctrl/for-next linus/master v6.10-rc5 next-20240627]
[cannot apply to robh/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Jonas-Karlman/dt-bindings-arm-rockchip-Add-Radxa-ROCK-3B/20240627-160354
base: https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next
patch link: https://lore.kernel.org/r/20240626201502.1384123-3-jonas%40kwiboo.se
patch subject: [PATCH v2 2/2] arm64: dts: rockchip: Add Radxa ROCK 3B
config: arm64-randconfig-051-20240628 (https://download.01.org/0day-ci/archive/20240628/202406282157.SmRgaZOQ-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 13.2.0
dtschema version: 2024.6.dev3+g650bf2d
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240628/202406282157.SmRgaZOQ-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202406282157.SmRgaZOQ-lkp@intel.com/
dtcheck warnings: (new ones prefixed by >>)
>> arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dtb: pmic@20: '#sound-dai-cells', 'assigned-clock-parents', 'assigned-clocks', 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml#
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 90f5172f37e6..ae0ae02f51e9 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -114,6 +114,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts433.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts new file mode 100644 index 000000000000..46c959f1c6ad --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts @@ -0,0 +1,780 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3568.dtsi" + +/ { + model = "Radxa ROCK 3B"; + compatible = "radxa,rock-3b", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + mmc0 = &sdhci; + mmc1 = &sdmmc0; + mmc2 = &sdmmc2; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_ir>; + }; + + leds { + compatible = "gpio-leds"; + + led-green { + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&led>; + }; + }; + + /* pi6c pcie clock generator */ + vcc3v3_pi6c_03: regulator-3v3-vcc-pi6c-03 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwren_h>; + regulator-name = "vcc3v3_pi6c_03"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <10000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_sys: regulator-3v3-vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_sys2: regulator-3v3-vcc-sys2 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys2"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: regulator-5v0-vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_usb_host: regulator-5v0-vcc-usb-host { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren_h>; + regulator-name = "vcc5v0_usb_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb_otg: regulator-5v0-vcc-usb-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_pwren_h>; + regulator-name = "vcc5v0_usb_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_h>; + post-power-on-delay-ms = <100>; + power-off-delay-us = <5000000>; + reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Analog RK809"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk809>; + }; + }; +}; + +&combphy0 { + status = "okay"; +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac0 { + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; + clock_in_out = "input"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus + &gmac0_clkinout>; + status = "okay"; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; + clock_in_out = "input"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_rgmii_bus + &gmac1m1_clkinout>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + #clock-cells = <1>; + clocks = <&cru I2S1_MCLKOUT_TX>; + clock-names = "mclk"; + clock-output-names = "rk809-clkout1", "rk809-clkout2"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; + #sound-dai-cells = <0>; + system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "rtcic_32kout"; + pinctrl-names = "default"; + pinctrl-0 = <&rtcic_int_l>; + wakeup-source; + }; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx + &i2s1m0_lrcktx + &i2s1m0_sdi0 + &i2s1m0_sdo0>; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-assert-us = <20000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + }; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-assert-us = <20000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; + }; +}; + +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie20m1_pins>; + reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_sys2>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x2m1_pins>; + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pinctrl { + bluetooth { + bt_reg_on_h: bt-reg-on-h { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host_h: bt-wake-host-h { + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + host_wake_bt_h: host-wake-bt-h { + rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + ir-receiver { + pwm3_ir: pwm3-ir { + rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led: led { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie_pwren_h: pcie-pwren-h { + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie20 { + pcie20m1_pins: pcie20m1-pins { + rockchip,pins = + <2 RK_PD0 4 &pcfg_pull_none>, + <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>, + <2 RK_PD1 4 &pcfg_pull_none>; + }; + }; + + pcie30x2 { + pcie30x2m1_pins: pcie30x2m1-pins { + rockchip,pins = + <2 RK_PD4 4 &pcfg_pull_none>, + <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>, + <2 RK_PD5 4 &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + rtc { + rtcic_int_l: rtcic-int-l { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + usb_host_pwren_h: usb-host-pwren-h { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_otg_pwren_h: usb-otg-pwren-h { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_reg_on_h: wifi-reg-on-h { + rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_wake_host_h: wifi-wake-host-h { + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + mmc-hs200-1_8v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdmmc2 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_clk &sdmmc2m0_cmd>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sys2>; + vqmmc-supply = <&vcc_1v8>; + status = "disabled"; +}; + +&sfc { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn &uart8m0_rtsn>; + uart-has-rtscts; + status = "disabled"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + extcon = <&usb2phy0>; + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +};
The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community version based on the RK3568 SoC and an industrial version based on the RK3568J SoC. Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- v2: - Use regulator-.* nodename for fixed regulators - Drop rockchip,mic-in-differential prop - Shorten Ethernet phy reset-deassert-us to 50 ms - Fix pcie pinctrl - Add keep-power-in-suspend to sdmmc2 Following issue is reported by dtbs_check and is fixed by series at [1]: pmic@20: '#sound-dai-cells', 'assigned-clock-parents', 'assigned-clocks', 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml# [1] https://lore.kernel.org/all/20240622-rk809-fixes-v2-0-c0db420d3639@collabora.com/ --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3568-rock-3b.dts | 780 ++++++++++++++++++ 2 files changed, 781 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts