| Message ID | 20240628105437.635079-1-mark.cave-ayland@ilande.co.uk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | hw/ide/macio.c: switch from using qemu_allocate_irq() to qdev input GPIOs | expand |
On Fri, 28 Jun 2024 at 11:55, Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> wrote: > > This prevents the IRQs from being leaked when the macio IDE device is used. > > Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> > --- > hw/ide/macio.c | 10 ++++++---- > include/hw/misc/macio/macio.h | 5 +++++ > 2 files changed, 11 insertions(+), 4 deletions(-) > > diff --git a/hw/ide/macio.c b/hw/ide/macio.c > index aca90d04f0..e84bf2c9f6 100644 > --- a/hw/ide/macio.c > +++ b/hw/ide/macio.c > @@ -420,7 +420,8 @@ static void macio_ide_realizefn(DeviceState *dev, Error **errp) > { > MACIOIDEState *s = MACIO_IDE(dev); > > - ide_bus_init_output_irq(&s->bus, s->ide_irq); > + ide_bus_init_output_irq(&s->bus, > + qdev_get_gpio_in(dev, MACIO_IDE_PMAC_IDE_IRQ)); > > /* Register DMA callbacks */ > s->dma.ops = &dbdma_ops; > @@ -456,8 +457,8 @@ static void macio_ide_initfn(Object *obj) > sysbus_init_mmio(d, &s->mem); > sysbus_init_irq(d, &s->real_ide_irq); > sysbus_init_irq(d, &s->real_dma_irq); > - s->dma_irq = qemu_allocate_irq(pmac_ide_irq, s, 0); > - s->ide_irq = qemu_allocate_irq(pmac_ide_irq, s, 1); > + > + qdev_init_gpio_in(DEVICE(obj), pmac_ide_irq, MACIO_IDE_PMAC_NIRQS); > > object_property_add_link(obj, "dbdma", TYPE_MAC_DBDMA, > (Object **) &s->dbdma, > @@ -508,7 +509,8 @@ void macio_ide_init_drives(MACIOIDEState *s, DriveInfo **hd_table) > > void macio_ide_register_dma(MACIOIDEState *s) > { > - DBDMA_register_channel(s->dbdma, s->channel, s->dma_irq, > + DBDMA_register_channel(s->dbdma, s->channel, > + qdev_get_gpio_in(DEVICE(s), MACIO_IDE_PMAC_DMA_IRQ), > pmac_ide_transfer, pmac_ide_flush, s); > } > > diff --git a/include/hw/misc/macio/macio.h b/include/hw/misc/macio/macio.h > index 2b54da6b31..869b66055b 100644 > --- a/include/hw/misc/macio/macio.h > +++ b/include/hw/misc/macio/macio.h > @@ -92,6 +92,11 @@ struct MACIOIDEState { > uint32_t irq_reg; > }; > > +#define MACIO_IDE_PMAC_NIRQS 2 > + > +#define MACIO_IDE_PMAC_DMA_IRQ 0 > +#define MACIO_IDE_PMAC_IDE_IRQ 1 > + > void macio_ide_init_drives(MACIOIDEState *ide, DriveInfo **hd_table); > void macio_ide_register_dma(MACIOIDEState *ide); Can we also now delete the dma_irq and ide_irq fields from the MACIOIDEState struct? Otherwise Reviewed-by: Peter Maydell <peter.maydell@linaro.org> thanks -- PMM
On 28/06/2024 16:28, Peter Maydell wrote: > On Fri, 28 Jun 2024 at 11:55, Mark Cave-Ayland > <mark.cave-ayland@ilande.co.uk> wrote: >> >> This prevents the IRQs from being leaked when the macio IDE device is used. >> >> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> >> --- >> hw/ide/macio.c | 10 ++++++---- >> include/hw/misc/macio/macio.h | 5 +++++ >> 2 files changed, 11 insertions(+), 4 deletions(-) >> >> diff --git a/hw/ide/macio.c b/hw/ide/macio.c >> index aca90d04f0..e84bf2c9f6 100644 >> --- a/hw/ide/macio.c >> +++ b/hw/ide/macio.c >> @@ -420,7 +420,8 @@ static void macio_ide_realizefn(DeviceState *dev, Error **errp) >> { >> MACIOIDEState *s = MACIO_IDE(dev); >> >> - ide_bus_init_output_irq(&s->bus, s->ide_irq); >> + ide_bus_init_output_irq(&s->bus, >> + qdev_get_gpio_in(dev, MACIO_IDE_PMAC_IDE_IRQ)); >> >> /* Register DMA callbacks */ >> s->dma.ops = &dbdma_ops; >> @@ -456,8 +457,8 @@ static void macio_ide_initfn(Object *obj) >> sysbus_init_mmio(d, &s->mem); >> sysbus_init_irq(d, &s->real_ide_irq); >> sysbus_init_irq(d, &s->real_dma_irq); >> - s->dma_irq = qemu_allocate_irq(pmac_ide_irq, s, 0); >> - s->ide_irq = qemu_allocate_irq(pmac_ide_irq, s, 1); >> + >> + qdev_init_gpio_in(DEVICE(obj), pmac_ide_irq, MACIO_IDE_PMAC_NIRQS); >> >> object_property_add_link(obj, "dbdma", TYPE_MAC_DBDMA, >> (Object **) &s->dbdma, >> @@ -508,7 +509,8 @@ void macio_ide_init_drives(MACIOIDEState *s, DriveInfo **hd_table) >> >> void macio_ide_register_dma(MACIOIDEState *s) >> { >> - DBDMA_register_channel(s->dbdma, s->channel, s->dma_irq, >> + DBDMA_register_channel(s->dbdma, s->channel, >> + qdev_get_gpio_in(DEVICE(s), MACIO_IDE_PMAC_DMA_IRQ), >> pmac_ide_transfer, pmac_ide_flush, s); >> } >> >> diff --git a/include/hw/misc/macio/macio.h b/include/hw/misc/macio/macio.h >> index 2b54da6b31..869b66055b 100644 >> --- a/include/hw/misc/macio/macio.h >> +++ b/include/hw/misc/macio/macio.h >> @@ -92,6 +92,11 @@ struct MACIOIDEState { >> uint32_t irq_reg; >> }; >> >> +#define MACIO_IDE_PMAC_NIRQS 2 >> + >> +#define MACIO_IDE_PMAC_DMA_IRQ 0 >> +#define MACIO_IDE_PMAC_IDE_IRQ 1 >> + >> void macio_ide_init_drives(MACIOIDEState *ide, DriveInfo **hd_table); >> void macio_ide_register_dma(MACIOIDEState *ide); > > Can we also now delete the dma_irq and ide_irq fields from the > MACIOIDEState struct? > > Otherwise > Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Ooops, yes. I'll update and send a v2 including your Reviewed-by tag. ATB, Mark.
diff --git a/hw/ide/macio.c b/hw/ide/macio.c index aca90d04f0..e84bf2c9f6 100644 --- a/hw/ide/macio.c +++ b/hw/ide/macio.c @@ -420,7 +420,8 @@ static void macio_ide_realizefn(DeviceState *dev, Error **errp) { MACIOIDEState *s = MACIO_IDE(dev); - ide_bus_init_output_irq(&s->bus, s->ide_irq); + ide_bus_init_output_irq(&s->bus, + qdev_get_gpio_in(dev, MACIO_IDE_PMAC_IDE_IRQ)); /* Register DMA callbacks */ s->dma.ops = &dbdma_ops; @@ -456,8 +457,8 @@ static void macio_ide_initfn(Object *obj) sysbus_init_mmio(d, &s->mem); sysbus_init_irq(d, &s->real_ide_irq); sysbus_init_irq(d, &s->real_dma_irq); - s->dma_irq = qemu_allocate_irq(pmac_ide_irq, s, 0); - s->ide_irq = qemu_allocate_irq(pmac_ide_irq, s, 1); + + qdev_init_gpio_in(DEVICE(obj), pmac_ide_irq, MACIO_IDE_PMAC_NIRQS); object_property_add_link(obj, "dbdma", TYPE_MAC_DBDMA, (Object **) &s->dbdma, @@ -508,7 +509,8 @@ void macio_ide_init_drives(MACIOIDEState *s, DriveInfo **hd_table) void macio_ide_register_dma(MACIOIDEState *s) { - DBDMA_register_channel(s->dbdma, s->channel, s->dma_irq, + DBDMA_register_channel(s->dbdma, s->channel, + qdev_get_gpio_in(DEVICE(s), MACIO_IDE_PMAC_DMA_IRQ), pmac_ide_transfer, pmac_ide_flush, s); } diff --git a/include/hw/misc/macio/macio.h b/include/hw/misc/macio/macio.h index 2b54da6b31..869b66055b 100644 --- a/include/hw/misc/macio/macio.h +++ b/include/hw/misc/macio/macio.h @@ -92,6 +92,11 @@ struct MACIOIDEState { uint32_t irq_reg; }; +#define MACIO_IDE_PMAC_NIRQS 2 + +#define MACIO_IDE_PMAC_DMA_IRQ 0 +#define MACIO_IDE_PMAC_IDE_IRQ 1 + void macio_ide_init_drives(MACIOIDEState *ide, DriveInfo **hd_table); void macio_ide_register_dma(MACIOIDEState *ide);
This prevents the IRQs from being leaked when the macio IDE device is used. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> --- hw/ide/macio.c | 10 ++++++---- include/hw/misc/macio/macio.h | 5 +++++ 2 files changed, 11 insertions(+), 4 deletions(-)