| Message ID | 20240529152858.183799-11-dan.scally@ideasonboard.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add Arm Mali-C55 Image Signal Processor Driver | expand |
Hi Dan, Thank you for the patch. On Wed, May 29, 2024 at 04:28:52PM +0100, Daniel Scally wrote: > Add a new code file to govern the 3a statistics capture node. > > Acked-by: Nayden Kanchev <nayden.kanchev@arm.com> > Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> > Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> > Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> > --- > Changes in v5: > > - New patch > > drivers/media/platform/arm/mali-c55/Makefile | 3 +- > .../platform/arm/mali-c55/mali-c55-common.h | 28 ++ > .../platform/arm/mali-c55/mali-c55-core.c | 15 + > .../platform/arm/mali-c55/mali-c55-isp.c | 1 + > .../arm/mali-c55/mali-c55-registers.h | 3 + > .../platform/arm/mali-c55/mali-c55-stats.c | 350 ++++++++++++++++++ > 6 files changed, 399 insertions(+), 1 deletion(-) > create mode 100644 drivers/media/platform/arm/mali-c55/mali-c55-stats.c > > diff --git a/drivers/media/platform/arm/mali-c55/Makefile b/drivers/media/platform/arm/mali-c55/Makefile > index 77dcb2fbf0f4..cd5a64bf0c62 100644 > --- a/drivers/media/platform/arm/mali-c55/Makefile > +++ b/drivers/media/platform/arm/mali-c55/Makefile > @@ -4,6 +4,7 @@ mali-c55-y := mali-c55-capture.o \ > mali-c55-core.o \ > mali-c55-isp.o \ > mali-c55-tpg.o \ > - mali-c55-resizer.o > + mali-c55-resizer.o \ > + mali-c55-stats.o > > obj-$(CONFIG_VIDEO_MALI_C55) += mali-c55.o > diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-common.h b/drivers/media/platform/arm/mali-c55/mali-c55-common.h > index 2d0c4d152beb..44119e04009b 100644 > --- a/drivers/media/platform/arm/mali-c55/mali-c55-common.h > +++ b/drivers/media/platform/arm/mali-c55/mali-c55-common.h > @@ -79,6 +79,7 @@ enum mali_c55_isp_pads { > MALI_C55_ISP_PAD_SINK_VIDEO, > MALI_C55_ISP_PAD_SOURCE, > MALI_C55_ISP_PAD_SOURCE_BYPASS, > + MALI_C55_ISP_PAD_SOURCE_3A, Functions and structures are named with a "stats" suffix, let's call this MALI_C55_ISP_PAD_SOURCE_STATS. > MALI_C55_ISP_NUM_PADS, > }; > > @@ -194,6 +195,28 @@ struct mali_c55_cap_dev { > bool streaming; > }; > > +struct mali_c55_stats_buf { > + struct vb2_v4l2_buffer vb; > + spinlock_t lock; All locks require a comment to document what they protect. Same below. > + unsigned int segments_remaining; > + struct list_head queue; > + bool failed; > +}; > + > +struct mali_c55_stats { > + struct mali_c55 *mali_c55; > + struct video_device vdev; > + struct dma_chan *channel; > + struct vb2_queue queue; > + struct media_pad pad; > + struct mutex lock; > + > + struct { > + spinlock_t lock; > + struct list_head queue; > + } buffers; > +}; > + > enum mali_c55_config_spaces { > MALI_C55_CONFIG_PING, > MALI_C55_CONFIG_PONG, > @@ -224,6 +247,7 @@ struct mali_c55 { > struct mali_c55_isp isp; > struct mali_c55_resizer resizers[MALI_C55_NUM_RZRS]; > struct mali_c55_cap_dev cap_devs[MALI_C55_NUM_CAP_DEVS]; > + struct mali_c55_stats stats; > > struct list_head contexts; > enum mali_c55_config_spaces next_config; > @@ -245,6 +269,8 @@ int mali_c55_register_resizers(struct mali_c55 *mali_c55); > void mali_c55_unregister_resizers(struct mali_c55 *mali_c55); > int mali_c55_register_capture_devs(struct mali_c55 *mali_c55); > void mali_c55_unregister_capture_devs(struct mali_c55 *mali_c55); > +int mali_c55_register_stats(struct mali_c55 *mali_c55); > +void mali_c55_unregister_stats(struct mali_c55 *mali_c55); > struct mali_c55_ctx *mali_c55_get_active_context(struct mali_c55 *mali_c55); > void mali_c55_set_plane_done(struct mali_c55_cap_dev *cap_dev, > enum mali_c55_planes plane); > @@ -262,5 +288,7 @@ mali_c55_isp_fmt_next(const struct mali_c55_isp_fmt *fmt); > bool mali_c55_isp_is_format_supported(unsigned int mbus_code); > #define for_each_mali_isp_fmt(fmt)\ > for ((fmt) = NULL; ((fmt) = mali_c55_isp_fmt_next((fmt)));) > +void mali_c55_stats_fill_buffer(struct mali_c55 *mali_c55, > + enum mali_c55_config_spaces cfg_space); > > #endif /* _MALI_C55_COMMON_H */ > diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c > index 50caf5ee7474..9ea70010876c 100644 > --- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c > +++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c > @@ -337,6 +337,16 @@ static int mali_c55_create_links(struct mali_c55 *mali_c55) > } > } > > + ret = media_create_pad_link(&mali_c55->isp.sd.entity, > + MALI_C55_ISP_PAD_SOURCE_3A, > + &mali_c55->stats.vdev.entity, 0, > + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); > + if (ret) { > + dev_err(mali_c55->dev, > + "failed to link ISP and 3a stats node\n"); s/3a stats/stats/ > + goto err_remove_links; > + } > + > return 0; > > err_remove_links: > @@ -350,6 +360,7 @@ static void mali_c55_unregister_entities(struct mali_c55 *mali_c55) > mali_c55_unregister_isp(mali_c55); > mali_c55_unregister_resizers(mali_c55); > mali_c55_unregister_capture_devs(mali_c55); > + mali_c55_unregister_stats(mali_c55); > } > > static int mali_c55_register_entities(struct mali_c55 *mali_c55) > @@ -372,6 +383,10 @@ static int mali_c55_register_entities(struct mali_c55 *mali_c55) > if (ret) > goto err_unregister_entities; > > + ret = mali_c55_register_stats(mali_c55); > + if (ret) > + goto err_unregister_entities; > + > ret = mali_c55_create_links(mali_c55); > if (ret) > goto err_unregister_entities; > diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-isp.c b/drivers/media/platform/arm/mali-c55/mali-c55-isp.c > index ea8b7b866e7a..94876fba3353 100644 > --- a/drivers/media/platform/arm/mali-c55/mali-c55-isp.c > +++ b/drivers/media/platform/arm/mali-c55/mali-c55-isp.c > @@ -564,6 +564,7 @@ int mali_c55_register_isp(struct mali_c55 *mali_c55) > isp->pads[MALI_C55_ISP_PAD_SINK_VIDEO].flags = MEDIA_PAD_FL_SINK; > isp->pads[MALI_C55_ISP_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; > isp->pads[MALI_C55_ISP_PAD_SOURCE_BYPASS].flags = MEDIA_PAD_FL_SOURCE; > + isp->pads[MALI_C55_ISP_PAD_SOURCE_3A].flags = MEDIA_PAD_FL_SOURCE; > > ret = media_entity_pads_init(&sd->entity, MALI_C55_ISP_NUM_PADS, > isp->pads); > diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h > index cb27abde2aa5..eb3719245ec3 100644 > --- a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h > +++ b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h > @@ -68,6 +68,9 @@ > #define MALI_C55_VC_START(v) ((v) & 0xffff) > #define MALI_C55_VC_SIZE(v) (((v) & 0xffff) << 16) > > +#define MALI_C55_REG_1024BIN_HIST 0x054a8 > +#define MALI_C55_1024BIN_HIST_SIZE 4096 > + > /* Ping/Pong Configuration Space */ > #define MALI_C55_REG_BASE_ADDR 0x18e88 > #define MALI_C55_REG_BYPASS_0 0x18eac > diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-stats.c b/drivers/media/platform/arm/mali-c55/mali-c55-stats.c > new file mode 100644 > index 000000000000..aa40480ed814 > --- /dev/null > +++ b/drivers/media/platform/arm/mali-c55/mali-c55-stats.c > @@ -0,0 +1,350 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * ARM Mali-C55 ISP Driver - 3A Statistics capture device > + * > + * Copyright (C) 2023 Ideas on Board Oy > + */ > + > +#include <linux/dmaengine.h> > +#include <linux/media/arm/mali-c55-config.h> > +#include <linux/spinlock.h> You're missing some headers here, for container_of() dev_err() list_*() mutex_init() strscpy() strscpy() > + > +#include <media/media-entity.h> > +#include <media/v4l2-dev.h> > +#include <media/v4l2-event.h> > +#include <media/v4l2-fh.h> > +#include <media/v4l2-ioctl.h> > +#include <media/videobuf2-core.h> > +#include <media/videobuf2-dma-contig.h> > + > +#include "mali-c55-common.h" > +#include "mali-c55-registers.h" > + > +static unsigned int metering_space_addrs[] = { const > + [MALI_C55_CONFIG_PING] = 0x095AC, > + [MALI_C55_CONFIG_PONG] = 0x2156C, Lower-case hex constants. > +}; > + > +static int mali_c55_stats_enum_fmt_meta_cap(struct file *file, void *fh, > + struct v4l2_fmtdesc *f) > +{ > + if (f->index || f->type != V4L2_BUF_TYPE_META_CAPTURE) > + return -EINVAL; > + > + f->pixelformat = V4L2_META_FMT_MALI_C55_3A_STATS; The format could be called V4L2_META_FMT_MALI_C55_STATS. While most statistics are related to one of the 3A algorithms, I think it would be better to name this generically. It's name bikeshedding only of course. > + > + return 0; > +} > + > +static int mali_c55_stats_g_fmt_meta_cap(struct file *file, void *fh, > + struct v4l2_format *f) > +{ > + static const struct v4l2_meta_format mfmt = { > + .dataformat = V4L2_META_FMT_MALI_C55_3A_STATS, > + .buffersize = sizeof(struct mali_c55_stats_buffer) > + }; > + > + if (f->type != V4L2_BUF_TYPE_META_CAPTURE) > + return -EINVAL; > + > + f->fmt.meta = mfmt; > + > + return 0; > +} > + > +static int mali_c55_stats_querycap(struct file *file, > + void *priv, struct v4l2_capability *cap) > +{ > + strscpy(cap->driver, MALI_C55_DRIVER_NAME, sizeof(cap->driver)); > + strscpy(cap->card, "ARM Mali-C55 ISP", sizeof(cap->card)); > + > + return 0; > +} > + > +static const struct v4l2_ioctl_ops mali_c55_stats_v4l2_ioctl_ops = { > + .vidioc_reqbufs = vb2_ioctl_reqbufs, > + .vidioc_querybuf = vb2_ioctl_querybuf, > + .vidioc_create_bufs = vb2_ioctl_create_bufs, > + .vidioc_qbuf = vb2_ioctl_qbuf, > + .vidioc_expbuf = vb2_ioctl_expbuf, > + .vidioc_dqbuf = vb2_ioctl_dqbuf, > + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, > + .vidioc_streamon = vb2_ioctl_streamon, > + .vidioc_streamoff = vb2_ioctl_streamoff, > + .vidioc_enum_fmt_meta_cap = mali_c55_stats_enum_fmt_meta_cap, > + .vidioc_g_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, > + .vidioc_s_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, > + .vidioc_try_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, > + .vidioc_querycap = mali_c55_stats_querycap, > + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, > + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, > +}; > + > +static const struct v4l2_file_operations mali_c55_stats_v4l2_fops = { > + .owner = THIS_MODULE, > + .unlocked_ioctl = video_ioctl2, > + .open = v4l2_fh_open, > + .release = vb2_fop_release, > + .poll = vb2_fop_poll, > + .mmap = vb2_fop_mmap, > +}; > + > +static int > +mali_c55_stats_queue_setup(struct vb2_queue *q, unsigned int *num_buffers, > + unsigned int *num_planes, unsigned int sizes[], > + struct device *alloc_devs[]) > +{ > + struct mali_c55_stats *stats = vb2_get_drv_priv(q); > + > + if (*num_planes && *num_planes > 1) > + return -EINVAL; > + > + if (sizes[0] && sizes[0] != sizeof(struct mali_c55_stats_buffer)) > + return -EINVAL; > + > + *num_planes = 1; > + sizes[0] = sizeof(struct mali_c55_stats_buffer); > + > + if (stats->channel) > + alloc_devs[0] = stats->channel->device->dev; > + > + return 0; > +} > + > +static void mali_c55_stats_buf_queue(struct vb2_buffer *vb) > +{ > + struct mali_c55_stats *stats = vb2_get_drv_priv(vb->vb2_queue); > + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); > + struct mali_c55_stats_buf *buf = container_of(vbuf, > + struct mali_c55_stats_buf, vb); > + > + vb2_set_plane_payload(vb, 0, sizeof(struct mali_c55_stats_buffer)); > + buf->segments_remaining = 2; > + buf->failed = false; > + > + spin_lock(&stats->buffers.lock); Isn't the DMA completion handler run from IRQ context ? If so you'll need to use spin_lock_irq() here and in the other function that are not called with interrupts disabled. > + list_add_tail(&buf->queue, &stats->buffers.queue); > + spin_unlock(&stats->buffers.lock); > +} > + > +static void mali_c55_stats_stop_streaming(struct vb2_queue *q) > +{ > + struct mali_c55_stats *stats = vb2_get_drv_priv(q); > + struct mali_c55_stats_buf *buf, *tmp; > + > + spin_lock(&stats->buffers.lock); > + > + list_for_each_entry_safe(buf, tmp, &stats->buffers.queue, queue) { > + list_del(&buf->queue); > + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); > + } > + > + spin_unlock(&stats->buffers.lock); > +} > + > +static const struct vb2_ops mali_c55_stats_vb2_ops = { > + .queue_setup = mali_c55_stats_queue_setup, > + .buf_queue = mali_c55_stats_buf_queue, > + .wait_prepare = vb2_ops_wait_prepare, > + .wait_finish = vb2_ops_wait_finish, > + .stop_streaming = mali_c55_stats_stop_streaming, > +}; > + > +static void > +mali_c55_stats_metering_complete(void *param, > + const struct dmaengine_result *result) > +{ > + struct mali_c55_stats_buf *buf = param; > + > + spin_lock(&buf->lock); I wonder if this is needed. Can the DMA engine call the completion handlers of two sequential DMA transfers in parallel ? > + > + if (buf->failed) > + goto out_unlock; > + > + buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns(); > + > + if (result->result != DMA_TRANS_NOERROR) { > + buf->failed = true; > + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); This will possibly return the buffer to userspace after the first DMA transfer. Userspace could then requeue the buffer to the kernel before the completion of the second DMA transfer. That will cause trouble. I think you should instead do something like spin_lock(&buf->lock); if (result->result != DMA_TRANS_NOERROR) buf->failed = true; if (!--buf->segments_remaining) { buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns(); vb2_buffer_done(&buf->vb.vb2_buf, buf->failed ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE); } spin_unlock(&buf->lock); The buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns(); line could also be moved to mali_c55_stats_fill_buffer(), which would make sure the timestamp is filled in case of DMA submission failures. > + goto out_unlock; > + } > + > + if (!--buf->segments_remaining) > + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); > + > +out_unlock: > + spin_unlock(&buf->lock); > +} > + > +static int mali_c55_stats_dma_xfer(struct mali_c55_stats *stats, dma_addr_t src, > + dma_addr_t dst, > + struct mali_c55_stats_buf *buf, > + size_t length, > + void (*callback)(void *, const struct dmaengine_result *result)) The same callback is used for both invocations of this function, you can drop the parameter and hardcode it below. > +{ > + struct dma_async_tx_descriptor *tx; > + dma_cookie_t cookie; > + > + tx = dmaengine_prep_dma_memcpy(stats->channel, dst, src, length, 0); > + if (!tx) { > + dev_err(stats->mali_c55->dev, "failed to prep stats DMA\n"); > + return -EIO; > + } > + > + tx->callback_result = callback; > + tx->callback_param = buf; > + > + cookie = dmaengine_submit(tx); > + if (dma_submit_error(cookie)) { > + dev_err(stats->mali_c55->dev, "failed to submit stats DMA\n"); > + return -EIO; > + } > + > + dma_async_issue_pending(stats->channel); > + return 0; > +} > + > +void mali_c55_stats_fill_buffer(struct mali_c55 *mali_c55, > + enum mali_c55_config_spaces cfg_space) > +{ > + struct mali_c55_ctx *ctx = mali_c55_get_active_context(mali_c55); > + struct mali_c55_stats *stats = &mali_c55->stats; > + struct mali_c55_stats_buf *buf = NULL; > + dma_addr_t src, dst; > + int ret; > + > + spin_lock(&stats->buffers.lock); > + if (!list_empty(&stats->buffers.queue)) { > + buf = list_first_entry(&stats->buffers.queue, > + struct mali_c55_stats_buf, queue); > + list_del(&buf->queue); > + } > + spin_unlock(&stats->buffers.lock); > + > + if (!buf) > + return; > + > + buf->vb.sequence = mali_c55->isp.frame_sequence; > + > + /* > + * There are infact two noncontiguous sections of the ISP's s/infact/in fact/ > + * memory space that hold statistics for 3a algorithms to use. A s/use. A/use: a/ > + * section in each config space and a global section holding > + * histograms which is double buffered and so holds data for the > + * last frame. We need to read both. > + */ > + src = ctx->base + MALI_C55_REG_1024BIN_HIST; > + dst = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); > + > + ret = mali_c55_stats_dma_xfer(stats, src, dst, buf, > + MALI_C55_1024BIN_HIST_SIZE, > + mali_c55_stats_metering_complete); > + if (ret) > + goto err_fail_buffer; > + > + src = ctx->base + metering_space_addrs[cfg_space]; > + dst += MALI_C55_1024BIN_HIST_SIZE; > + > + ret = mali_c55_stats_dma_xfer( > + stats, src, dst, buf, > + sizeof(struct mali_c55_stats_buffer) - MALI_C55_1024BIN_HIST_SIZE, > + mali_c55_stats_metering_complete); > + if (ret) { > + dmaengine_terminate_sync(stats->channel); > + goto err_fail_buffer; > + } I think you will need to terminate DMA transfers at stream off time. > + > + return; > + > +err_fail_buffer: > + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); > +} > + > +void mali_c55_unregister_stats(struct mali_c55 *mali_c55) > +{ > + struct mali_c55_stats *stats = &mali_c55->stats; > + > + if (!video_is_registered(&stats->vdev)) > + return; > + > + vb2_video_unregister_device(&stats->vdev); > + media_entity_cleanup(&stats->vdev.entity); > + dma_release_channel(stats->channel); > + mutex_destroy(&stats->lock); > +} > + > +int mali_c55_register_stats(struct mali_c55 *mali_c55) > +{ > + struct mali_c55_stats *stats = &mali_c55->stats; > + struct video_device *vdev = &stats->vdev; > + struct vb2_queue *vb2q = &stats->queue; > + dma_cap_mask_t mask; > + int ret; > + > + mutex_init(&stats->lock); > + INIT_LIST_HEAD(&stats->buffers.queue); > + > + dma_cap_zero(mask); > + dma_cap_set(DMA_MEMCPY, mask); > + > + stats->channel = dma_request_channel(mask, 0, NULL); Do we need a CPU fallback in case no DMA is available ? I'm still very curious to know how long it takes to perform the DMA transfer, compared to copying the data with the CPU, and especially compared to the frame duration. > + if (!stats->channel) { > + ret = -ENODEV; > + goto err_destroy_mutex; > + } > + > + stats->pad.flags = MEDIA_PAD_FL_SINK; > + ret = media_entity_pads_init(&stats->vdev.entity, 1, &stats->pad); > + if (ret) > + goto err_release_dma_channel; > + > + vb2q->type = V4L2_BUF_TYPE_META_CAPTURE; > + vb2q->io_modes = VB2_MMAP | VB2_DMABUF; > + vb2q->drv_priv = stats; > + vb2q->mem_ops = &vb2_dma_contig_memops; > + vb2q->ops = &mali_c55_stats_vb2_ops; > + vb2q->buf_struct_size = sizeof(struct mali_c55_stats_buf); > + vb2q->min_queued_buffers = 1; > + vb2q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; > + vb2q->lock = &stats->lock; > + vb2q->dev = mali_c55->dev; That's not the right device. The device that performs the DMA operation is the DMA engine, and that's what you need to pass to vb2. Otherwise the DMA address returned by vb2_dma_contig_plane_dma_addr() will be mapped to the ISP device, not the DMA engine. In practice, if neither are behind an IOMMU, things will likely work, but when that's not the case, run into problems. > + > + ret = vb2_queue_init(vb2q); > + if (ret) { > + dev_err(mali_c55->dev, "stats vb2 queue init failed\n"); > + goto err_cleanup_entity; > + } > + > + strscpy(stats->vdev.name, "mali-c55 3a stats", sizeof(stats->vdev.name)); s/3a // > + vdev->release = video_device_release_empty; That's never right. You should refcount the data structures to ensure proper lifetime management. > + vdev->fops = &mali_c55_stats_v4l2_fops; > + vdev->ioctl_ops = &mali_c55_stats_v4l2_ioctl_ops; > + vdev->lock = &stats->lock; > + vdev->v4l2_dev = &mali_c55->v4l2_dev; > + vdev->queue = &stats->queue; > + vdev->device_caps = V4L2_CAP_META_CAPTURE | V4L2_CAP_STREAMING; > + vdev->vfl_dir = VFL_DIR_RX; > + video_set_drvdata(vdev, stats); > + > + ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1); > + if (ret) { > + dev_err(mali_c55->dev, > + "failed to register stats video device\n"); > + goto err_release_vb2q; > + } > + > + stats->mali_c55 = mali_c55; > + > + return 0; > + > +err_release_vb2q: > + vb2_queue_release(vb2q); > +err_cleanup_entity: > + media_entity_cleanup(&stats->vdev.entity); > +err_release_dma_channel: > + dma_release_channel(stats->channel); > +err_destroy_mutex: > + mutex_destroy(&stats->lock); > + > + return ret; > +}
Hi Laurent On 16/06/2024 22:19, Laurent Pinchart wrote: > Hi Dan, > > Thank you for the patch. > > On Wed, May 29, 2024 at 04:28:52PM +0100, Daniel Scally wrote: >> Add a new code file to govern the 3a statistics capture node. >> >> Acked-by: Nayden Kanchev <nayden.kanchev@arm.com> >> Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> >> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> >> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> >> --- >> Changes in v5: >> >> - New patch >> >> drivers/media/platform/arm/mali-c55/Makefile | 3 +- >> .../platform/arm/mali-c55/mali-c55-common.h | 28 ++ >> .../platform/arm/mali-c55/mali-c55-core.c | 15 + >> .../platform/arm/mali-c55/mali-c55-isp.c | 1 + >> .../arm/mali-c55/mali-c55-registers.h | 3 + >> .../platform/arm/mali-c55/mali-c55-stats.c | 350 ++++++++++++++++++ >> 6 files changed, 399 insertions(+), 1 deletion(-) >> create mode 100644 drivers/media/platform/arm/mali-c55/mali-c55-stats.c >> >> diff --git a/drivers/media/platform/arm/mali-c55/Makefile b/drivers/media/platform/arm/mali-c55/Makefile >> index 77dcb2fbf0f4..cd5a64bf0c62 100644 >> --- a/drivers/media/platform/arm/mali-c55/Makefile >> +++ b/drivers/media/platform/arm/mali-c55/Makefile >> @@ -4,6 +4,7 @@ mali-c55-y := mali-c55-capture.o \ >> mali-c55-core.o \ >> mali-c55-isp.o \ >> mali-c55-tpg.o \ >> - mali-c55-resizer.o >> + mali-c55-resizer.o \ >> + mali-c55-stats.o >> >> obj-$(CONFIG_VIDEO_MALI_C55) += mali-c55.o >> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-common.h b/drivers/media/platform/arm/mali-c55/mali-c55-common.h >> index 2d0c4d152beb..44119e04009b 100644 >> --- a/drivers/media/platform/arm/mali-c55/mali-c55-common.h >> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-common.h >> @@ -79,6 +79,7 @@ enum mali_c55_isp_pads { >> MALI_C55_ISP_PAD_SINK_VIDEO, >> MALI_C55_ISP_PAD_SOURCE, >> MALI_C55_ISP_PAD_SOURCE_BYPASS, >> + MALI_C55_ISP_PAD_SOURCE_3A, > Functions and structures are named with a "stats" suffix, let's call > this MALI_C55_ISP_PAD_SOURCE_STATS. > >> MALI_C55_ISP_NUM_PADS, >> }; >> >> @@ -194,6 +195,28 @@ struct mali_c55_cap_dev { >> bool streaming; >> }; >> >> +struct mali_c55_stats_buf { >> + struct vb2_v4l2_buffer vb; >> + spinlock_t lock; > All locks require a comment to document what they protect. Same below. > >> + unsigned int segments_remaining; >> + struct list_head queue; >> + bool failed; >> +}; >> + >> +struct mali_c55_stats { >> + struct mali_c55 *mali_c55; >> + struct video_device vdev; >> + struct dma_chan *channel; >> + struct vb2_queue queue; >> + struct media_pad pad; >> + struct mutex lock; >> + >> + struct { >> + spinlock_t lock; >> + struct list_head queue; >> + } buffers; >> +}; >> + >> enum mali_c55_config_spaces { >> MALI_C55_CONFIG_PING, >> MALI_C55_CONFIG_PONG, >> @@ -224,6 +247,7 @@ struct mali_c55 { >> struct mali_c55_isp isp; >> struct mali_c55_resizer resizers[MALI_C55_NUM_RZRS]; >> struct mali_c55_cap_dev cap_devs[MALI_C55_NUM_CAP_DEVS]; >> + struct mali_c55_stats stats; >> >> struct list_head contexts; >> enum mali_c55_config_spaces next_config; >> @@ -245,6 +269,8 @@ int mali_c55_register_resizers(struct mali_c55 *mali_c55); >> void mali_c55_unregister_resizers(struct mali_c55 *mali_c55); >> int mali_c55_register_capture_devs(struct mali_c55 *mali_c55); >> void mali_c55_unregister_capture_devs(struct mali_c55 *mali_c55); >> +int mali_c55_register_stats(struct mali_c55 *mali_c55); >> +void mali_c55_unregister_stats(struct mali_c55 *mali_c55); >> struct mali_c55_ctx *mali_c55_get_active_context(struct mali_c55 *mali_c55); >> void mali_c55_set_plane_done(struct mali_c55_cap_dev *cap_dev, >> enum mali_c55_planes plane); >> @@ -262,5 +288,7 @@ mali_c55_isp_fmt_next(const struct mali_c55_isp_fmt *fmt); >> bool mali_c55_isp_is_format_supported(unsigned int mbus_code); >> #define for_each_mali_isp_fmt(fmt)\ >> for ((fmt) = NULL; ((fmt) = mali_c55_isp_fmt_next((fmt)));) >> +void mali_c55_stats_fill_buffer(struct mali_c55 *mali_c55, >> + enum mali_c55_config_spaces cfg_space); >> >> #endif /* _MALI_C55_COMMON_H */ >> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c >> index 50caf5ee7474..9ea70010876c 100644 >> --- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c >> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c >> @@ -337,6 +337,16 @@ static int mali_c55_create_links(struct mali_c55 *mali_c55) >> } >> } >> >> + ret = media_create_pad_link(&mali_c55->isp.sd.entity, >> + MALI_C55_ISP_PAD_SOURCE_3A, >> + &mali_c55->stats.vdev.entity, 0, >> + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); >> + if (ret) { >> + dev_err(mali_c55->dev, >> + "failed to link ISP and 3a stats node\n"); > s/3a stats/stats/ > >> + goto err_remove_links; >> + } >> + >> return 0; >> >> err_remove_links: >> @@ -350,6 +360,7 @@ static void mali_c55_unregister_entities(struct mali_c55 *mali_c55) >> mali_c55_unregister_isp(mali_c55); >> mali_c55_unregister_resizers(mali_c55); >> mali_c55_unregister_capture_devs(mali_c55); >> + mali_c55_unregister_stats(mali_c55); >> } >> >> static int mali_c55_register_entities(struct mali_c55 *mali_c55) >> @@ -372,6 +383,10 @@ static int mali_c55_register_entities(struct mali_c55 *mali_c55) >> if (ret) >> goto err_unregister_entities; >> >> + ret = mali_c55_register_stats(mali_c55); >> + if (ret) >> + goto err_unregister_entities; >> + >> ret = mali_c55_create_links(mali_c55); >> if (ret) >> goto err_unregister_entities; >> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-isp.c b/drivers/media/platform/arm/mali-c55/mali-c55-isp.c >> index ea8b7b866e7a..94876fba3353 100644 >> --- a/drivers/media/platform/arm/mali-c55/mali-c55-isp.c >> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-isp.c >> @@ -564,6 +564,7 @@ int mali_c55_register_isp(struct mali_c55 *mali_c55) >> isp->pads[MALI_C55_ISP_PAD_SINK_VIDEO].flags = MEDIA_PAD_FL_SINK; >> isp->pads[MALI_C55_ISP_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; >> isp->pads[MALI_C55_ISP_PAD_SOURCE_BYPASS].flags = MEDIA_PAD_FL_SOURCE; >> + isp->pads[MALI_C55_ISP_PAD_SOURCE_3A].flags = MEDIA_PAD_FL_SOURCE; >> >> ret = media_entity_pads_init(&sd->entity, MALI_C55_ISP_NUM_PADS, >> isp->pads); >> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h >> index cb27abde2aa5..eb3719245ec3 100644 >> --- a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h >> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h >> @@ -68,6 +68,9 @@ >> #define MALI_C55_VC_START(v) ((v) & 0xffff) >> #define MALI_C55_VC_SIZE(v) (((v) & 0xffff) << 16) >> >> +#define MALI_C55_REG_1024BIN_HIST 0x054a8 >> +#define MALI_C55_1024BIN_HIST_SIZE 4096 >> + >> /* Ping/Pong Configuration Space */ >> #define MALI_C55_REG_BASE_ADDR 0x18e88 >> #define MALI_C55_REG_BYPASS_0 0x18eac >> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-stats.c b/drivers/media/platform/arm/mali-c55/mali-c55-stats.c >> new file mode 100644 >> index 000000000000..aa40480ed814 >> --- /dev/null >> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-stats.c >> @@ -0,0 +1,350 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * ARM Mali-C55 ISP Driver - 3A Statistics capture device >> + * >> + * Copyright (C) 2023 Ideas on Board Oy >> + */ >> + >> +#include <linux/dmaengine.h> >> +#include <linux/media/arm/mali-c55-config.h> >> +#include <linux/spinlock.h> > You're missing some headers here, for > > container_of() > dev_err() > list_*() > mutex_init() > strscpy() > strscpy() > >> + >> +#include <media/media-entity.h> >> +#include <media/v4l2-dev.h> >> +#include <media/v4l2-event.h> >> +#include <media/v4l2-fh.h> >> +#include <media/v4l2-ioctl.h> >> +#include <media/videobuf2-core.h> >> +#include <media/videobuf2-dma-contig.h> >> + >> +#include "mali-c55-common.h" >> +#include "mali-c55-registers.h" >> + >> +static unsigned int metering_space_addrs[] = { > const > >> + [MALI_C55_CONFIG_PING] = 0x095AC, >> + [MALI_C55_CONFIG_PONG] = 0x2156C, > Lower-case hex constants. > >> +}; >> + >> +static int mali_c55_stats_enum_fmt_meta_cap(struct file *file, void *fh, >> + struct v4l2_fmtdesc *f) >> +{ >> + if (f->index || f->type != V4L2_BUF_TYPE_META_CAPTURE) >> + return -EINVAL; >> + >> + f->pixelformat = V4L2_META_FMT_MALI_C55_3A_STATS; > The format could be called V4L2_META_FMT_MALI_C55_STATS. While most > statistics are related to one of the 3A algorithms, I think it would be > better to name this generically. It's name bikeshedding only of course. > >> + >> + return 0; >> +} >> + >> +static int mali_c55_stats_g_fmt_meta_cap(struct file *file, void *fh, >> + struct v4l2_format *f) >> +{ >> + static const struct v4l2_meta_format mfmt = { >> + .dataformat = V4L2_META_FMT_MALI_C55_3A_STATS, >> + .buffersize = sizeof(struct mali_c55_stats_buffer) >> + }; >> + >> + if (f->type != V4L2_BUF_TYPE_META_CAPTURE) >> + return -EINVAL; >> + >> + f->fmt.meta = mfmt; >> + >> + return 0; >> +} >> + >> +static int mali_c55_stats_querycap(struct file *file, >> + void *priv, struct v4l2_capability *cap) >> +{ >> + strscpy(cap->driver, MALI_C55_DRIVER_NAME, sizeof(cap->driver)); >> + strscpy(cap->card, "ARM Mali-C55 ISP", sizeof(cap->card)); >> + >> + return 0; >> +} >> + >> +static const struct v4l2_ioctl_ops mali_c55_stats_v4l2_ioctl_ops = { >> + .vidioc_reqbufs = vb2_ioctl_reqbufs, >> + .vidioc_querybuf = vb2_ioctl_querybuf, >> + .vidioc_create_bufs = vb2_ioctl_create_bufs, >> + .vidioc_qbuf = vb2_ioctl_qbuf, >> + .vidioc_expbuf = vb2_ioctl_expbuf, >> + .vidioc_dqbuf = vb2_ioctl_dqbuf, >> + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, >> + .vidioc_streamon = vb2_ioctl_streamon, >> + .vidioc_streamoff = vb2_ioctl_streamoff, >> + .vidioc_enum_fmt_meta_cap = mali_c55_stats_enum_fmt_meta_cap, >> + .vidioc_g_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, >> + .vidioc_s_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, >> + .vidioc_try_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, >> + .vidioc_querycap = mali_c55_stats_querycap, >> + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, >> + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, >> +}; >> + >> +static const struct v4l2_file_operations mali_c55_stats_v4l2_fops = { >> + .owner = THIS_MODULE, >> + .unlocked_ioctl = video_ioctl2, >> + .open = v4l2_fh_open, >> + .release = vb2_fop_release, >> + .poll = vb2_fop_poll, >> + .mmap = vb2_fop_mmap, >> +}; >> + >> +static int >> +mali_c55_stats_queue_setup(struct vb2_queue *q, unsigned int *num_buffers, >> + unsigned int *num_planes, unsigned int sizes[], >> + struct device *alloc_devs[]) >> +{ >> + struct mali_c55_stats *stats = vb2_get_drv_priv(q); >> + >> + if (*num_planes && *num_planes > 1) >> + return -EINVAL; >> + >> + if (sizes[0] && sizes[0] != sizeof(struct mali_c55_stats_buffer)) >> + return -EINVAL; >> + >> + *num_planes = 1; >> + sizes[0] = sizeof(struct mali_c55_stats_buffer); >> + >> + if (stats->channel) >> + alloc_devs[0] = stats->channel->device->dev; >> + >> + return 0; >> +} >> + >> +static void mali_c55_stats_buf_queue(struct vb2_buffer *vb) >> +{ >> + struct mali_c55_stats *stats = vb2_get_drv_priv(vb->vb2_queue); >> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); >> + struct mali_c55_stats_buf *buf = container_of(vbuf, >> + struct mali_c55_stats_buf, vb); >> + >> + vb2_set_plane_payload(vb, 0, sizeof(struct mali_c55_stats_buffer)); >> + buf->segments_remaining = 2; >> + buf->failed = false; >> + >> + spin_lock(&stats->buffers.lock); > Isn't the DMA completion handler run from IRQ context ? If so you'll need to use spin_lock_irq() here and in the other function that are not > called with interrupts disabled. They're run in the bottom half of the interrupt handler; I'm under the impression that that means the interrupts aren't disabled, and it's safe to do...is that mistaken? > >> + list_add_tail(&buf->queue, &stats->buffers.queue); >> + spin_unlock(&stats->buffers.lock); >> +} >> + >> +static void mali_c55_stats_stop_streaming(struct vb2_queue *q) >> +{ >> + struct mali_c55_stats *stats = vb2_get_drv_priv(q); >> + struct mali_c55_stats_buf *buf, *tmp; >> + >> + spin_lock(&stats->buffers.lock); >> + >> + list_for_each_entry_safe(buf, tmp, &stats->buffers.queue, queue) { >> + list_del(&buf->queue); >> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); >> + } >> + >> + spin_unlock(&stats->buffers.lock); >> +} >> + >> +static const struct vb2_ops mali_c55_stats_vb2_ops = { >> + .queue_setup = mali_c55_stats_queue_setup, >> + .buf_queue = mali_c55_stats_buf_queue, >> + .wait_prepare = vb2_ops_wait_prepare, >> + .wait_finish = vb2_ops_wait_finish, >> + .stop_streaming = mali_c55_stats_stop_streaming, >> +}; >> + >> +static void >> +mali_c55_stats_metering_complete(void *param, >> + const struct dmaengine_result *result) >> +{ >> + struct mali_c55_stats_buf *buf = param; >> + >> + spin_lock(&buf->lock); > I wonder if this is needed. Can the DMA engine call the completion > handlers of two sequential DMA transfers in parallel ? The DMA engine that's on the system we have can't...I wasn't sure whether that was generically true. > >> + >> + if (buf->failed) >> + goto out_unlock; >> + >> + buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns(); >> + >> + if (result->result != DMA_TRANS_NOERROR) { >> + buf->failed = true; >> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); > This will possibly return the buffer to userspace after the first DMA > transfer. Userspace could then requeue the buffer to the kernel before > the completion of the second DMA transfer. That will cause trouble. I > think you should instead do something like > > spin_lock(&buf->lock); > > if (result->result != DMA_TRANS_NOERROR) > buf->failed = true; > > if (!--buf->segments_remaining) { > buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns(); > vb2_buffer_done(&buf->vb.vb2_buf, buf->failed ? > VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE); > } > > spin_unlock(&buf->lock); > > The > > buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns(); > > line could also be moved to mali_c55_stats_fill_buffer(), which would > make sure the timestamp is filled in case of DMA submission failures. Okedokey > >> + goto out_unlock; >> + } >> + >> + if (!--buf->segments_remaining) >> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); >> + >> +out_unlock: >> + spin_unlock(&buf->lock); >> +} >> + >> +static int mali_c55_stats_dma_xfer(struct mali_c55_stats *stats, dma_addr_t src, >> + dma_addr_t dst, >> + struct mali_c55_stats_buf *buf, >> + size_t length, >> + void (*callback)(void *, const struct dmaengine_result *result)) > The same callback is used for both invocations of this function, you can > drop the parameter and hardcode it below. Yeah, not even sure now why I had a parameter. >> +{ >> + struct dma_async_tx_descriptor *tx; >> + dma_cookie_t cookie; >> + >> + tx = dmaengine_prep_dma_memcpy(stats->channel, dst, src, length, 0); >> + if (!tx) { >> + dev_err(stats->mali_c55->dev, "failed to prep stats DMA\n"); >> + return -EIO; >> + } >> + >> + tx->callback_result = callback; >> + tx->callback_param = buf; >> + >> + cookie = dmaengine_submit(tx); >> + if (dma_submit_error(cookie)) { >> + dev_err(stats->mali_c55->dev, "failed to submit stats DMA\n"); >> + return -EIO; >> + } >> + >> + dma_async_issue_pending(stats->channel); >> + return 0; >> +} >> + >> +void mali_c55_stats_fill_buffer(struct mali_c55 *mali_c55, >> + enum mali_c55_config_spaces cfg_space) >> +{ >> + struct mali_c55_ctx *ctx = mali_c55_get_active_context(mali_c55); >> + struct mali_c55_stats *stats = &mali_c55->stats; >> + struct mali_c55_stats_buf *buf = NULL; >> + dma_addr_t src, dst; >> + int ret; >> + >> + spin_lock(&stats->buffers.lock); >> + if (!list_empty(&stats->buffers.queue)) { >> + buf = list_first_entry(&stats->buffers.queue, >> + struct mali_c55_stats_buf, queue); >> + list_del(&buf->queue); >> + } >> + spin_unlock(&stats->buffers.lock); >> + >> + if (!buf) >> + return; >> + >> + buf->vb.sequence = mali_c55->isp.frame_sequence; >> + >> + /* >> + * There are infact two noncontiguous sections of the ISP's > s/infact/in fact/ > >> + * memory space that hold statistics for 3a algorithms to use. A > s/use. A/use: a/ > >> + * section in each config space and a global section holding >> + * histograms which is double buffered and so holds data for the >> + * last frame. We need to read both. >> + */ >> + src = ctx->base + MALI_C55_REG_1024BIN_HIST; >> + dst = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); >> + >> + ret = mali_c55_stats_dma_xfer(stats, src, dst, buf, >> + MALI_C55_1024BIN_HIST_SIZE, >> + mali_c55_stats_metering_complete); >> + if (ret) >> + goto err_fail_buffer; >> + >> + src = ctx->base + metering_space_addrs[cfg_space]; >> + dst += MALI_C55_1024BIN_HIST_SIZE; >> + >> + ret = mali_c55_stats_dma_xfer( >> + stats, src, dst, buf, >> + sizeof(struct mali_c55_stats_buffer) - MALI_C55_1024BIN_HIST_SIZE, >> + mali_c55_stats_metering_complete); >> + if (ret) { >> + dmaengine_terminate_sync(stats->channel); >> + goto err_fail_buffer; >> + } > I think you will need to terminate DMA transfers at stream off time. > >> + >> + return; >> + >> +err_fail_buffer: >> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); >> +} >> + >> +void mali_c55_unregister_stats(struct mali_c55 *mali_c55) >> +{ >> + struct mali_c55_stats *stats = &mali_c55->stats; >> + >> + if (!video_is_registered(&stats->vdev)) >> + return; >> + >> + vb2_video_unregister_device(&stats->vdev); >> + media_entity_cleanup(&stats->vdev.entity); >> + dma_release_channel(stats->channel); >> + mutex_destroy(&stats->lock); >> +} >> + >> +int mali_c55_register_stats(struct mali_c55 *mali_c55) >> +{ >> + struct mali_c55_stats *stats = &mali_c55->stats; >> + struct video_device *vdev = &stats->vdev; >> + struct vb2_queue *vb2q = &stats->queue; >> + dma_cap_mask_t mask; >> + int ret; >> + >> + mutex_init(&stats->lock); >> + INIT_LIST_HEAD(&stats->buffers.queue); >> + >> + dma_cap_zero(mask); >> + dma_cap_set(DMA_MEMCPY, mask); >> + >> + stats->channel = dma_request_channel(mask, 0, NULL); > Do we need a CPU fallback in case no DMA is available ? Yes, actually. > > I'm still very curious to know how long it takes to perform the DMA > transfer, compared to copying the data with the CPU, and especially > compared to the frame duration. On my list of things to test and report :) > >> + if (!stats->channel) { >> + ret = -ENODEV; >> + goto err_destroy_mutex; >> + } >> + >> + stats->pad.flags = MEDIA_PAD_FL_SINK; >> + ret = media_entity_pads_init(&stats->vdev.entity, 1, &stats->pad); >> + if (ret) >> + goto err_release_dma_channel; >> + >> + vb2q->type = V4L2_BUF_TYPE_META_CAPTURE; >> + vb2q->io_modes = VB2_MMAP | VB2_DMABUF; >> + vb2q->drv_priv = stats; >> + vb2q->mem_ops = &vb2_dma_contig_memops; >> + vb2q->ops = &mali_c55_stats_vb2_ops; >> + vb2q->buf_struct_size = sizeof(struct mali_c55_stats_buf); >> + vb2q->min_queued_buffers = 1; >> + vb2q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; >> + vb2q->lock = &stats->lock; >> + vb2q->dev = mali_c55->dev; > That's not the right device. The device that performs the DMA operation > is the DMA engine, and that's what you need to pass to vb2. Otherwise > the DMA address returned by vb2_dma_contig_plane_dma_addr() will be > mapped to the ISP device, not the DMA engine. In practice, if neither > are behind an IOMMU, things will likely work, but when that's not the > case, run into problems. > >> + >> + ret = vb2_queue_init(vb2q); >> + if (ret) { >> + dev_err(mali_c55->dev, "stats vb2 queue init failed\n"); >> + goto err_cleanup_entity; >> + } >> + >> + strscpy(stats->vdev.name, "mali-c55 3a stats", sizeof(stats->vdev.name)); > s/3a // > >> + vdev->release = video_device_release_empty; > That's never right. You should refcount the data structures to ensure > proper lifetime management. > >> + vdev->fops = &mali_c55_stats_v4l2_fops; >> + vdev->ioctl_ops = &mali_c55_stats_v4l2_ioctl_ops; >> + vdev->lock = &stats->lock; >> + vdev->v4l2_dev = &mali_c55->v4l2_dev; >> + vdev->queue = &stats->queue; >> + vdev->device_caps = V4L2_CAP_META_CAPTURE | V4L2_CAP_STREAMING; >> + vdev->vfl_dir = VFL_DIR_RX; >> + video_set_drvdata(vdev, stats); >> + >> + ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1); >> + if (ret) { >> + dev_err(mali_c55->dev, >> + "failed to register stats video device\n"); >> + goto err_release_vb2q; >> + } >> + >> + stats->mali_c55 = mali_c55; >> + >> + return 0; >> + >> +err_release_vb2q: >> + vb2_queue_release(vb2q); >> +err_cleanup_entity: >> + media_entity_cleanup(&stats->vdev.entity); >> +err_release_dma_channel: >> + dma_release_channel(stats->channel); >> +err_destroy_mutex: >> + mutex_destroy(&stats->lock); >> + >> + return ret; >> +}
Hi Dan, On Thu, Jun 20, 2024 at 04:10:01PM +0100, Daniel Scally wrote: > On 16/06/2024 22:19, Laurent Pinchart wrote: > > On Wed, May 29, 2024 at 04:28:52PM +0100, Daniel Scally wrote: > >> Add a new code file to govern the 3a statistics capture node. > >> > >> Acked-by: Nayden Kanchev <nayden.kanchev@arm.com> > >> Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> > >> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> > >> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> > >> --- > >> Changes in v5: > >> > >> - New patch > >> > >> drivers/media/platform/arm/mali-c55/Makefile | 3 +- > >> .../platform/arm/mali-c55/mali-c55-common.h | 28 ++ > >> .../platform/arm/mali-c55/mali-c55-core.c | 15 + > >> .../platform/arm/mali-c55/mali-c55-isp.c | 1 + > >> .../arm/mali-c55/mali-c55-registers.h | 3 + > >> .../platform/arm/mali-c55/mali-c55-stats.c | 350 ++++++++++++++++++ > >> 6 files changed, 399 insertions(+), 1 deletion(-) > >> create mode 100644 drivers/media/platform/arm/mali-c55/mali-c55-stats.c > >> > >> diff --git a/drivers/media/platform/arm/mali-c55/Makefile b/drivers/media/platform/arm/mali-c55/Makefile > >> index 77dcb2fbf0f4..cd5a64bf0c62 100644 > >> --- a/drivers/media/platform/arm/mali-c55/Makefile > >> +++ b/drivers/media/platform/arm/mali-c55/Makefile > >> @@ -4,6 +4,7 @@ mali-c55-y := mali-c55-capture.o \ > >> mali-c55-core.o \ > >> mali-c55-isp.o \ > >> mali-c55-tpg.o \ > >> - mali-c55-resizer.o > >> + mali-c55-resizer.o \ > >> + mali-c55-stats.o > >> > >> obj-$(CONFIG_VIDEO_MALI_C55) += mali-c55.o > >> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-common.h b/drivers/media/platform/arm/mali-c55/mali-c55-common.h > >> index 2d0c4d152beb..44119e04009b 100644 > >> --- a/drivers/media/platform/arm/mali-c55/mali-c55-common.h > >> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-common.h > >> @@ -79,6 +79,7 @@ enum mali_c55_isp_pads { > >> MALI_C55_ISP_PAD_SINK_VIDEO, > >> MALI_C55_ISP_PAD_SOURCE, > >> MALI_C55_ISP_PAD_SOURCE_BYPASS, > >> + MALI_C55_ISP_PAD_SOURCE_3A, > > > > Functions and structures are named with a "stats" suffix, let's call > > this MALI_C55_ISP_PAD_SOURCE_STATS. > > > >> MALI_C55_ISP_NUM_PADS, > >> }; > >> > >> @@ -194,6 +195,28 @@ struct mali_c55_cap_dev { > >> bool streaming; > >> }; > >> > >> +struct mali_c55_stats_buf { > >> + struct vb2_v4l2_buffer vb; > >> + spinlock_t lock; > > > > All locks require a comment to document what they protect. Same below. > > > >> + unsigned int segments_remaining; > >> + struct list_head queue; > >> + bool failed; > >> +}; > >> + > >> +struct mali_c55_stats { > >> + struct mali_c55 *mali_c55; > >> + struct video_device vdev; > >> + struct dma_chan *channel; > >> + struct vb2_queue queue; > >> + struct media_pad pad; > >> + struct mutex lock; > >> + > >> + struct { > >> + spinlock_t lock; > >> + struct list_head queue; > >> + } buffers; > >> +}; > >> + > >> enum mali_c55_config_spaces { > >> MALI_C55_CONFIG_PING, > >> MALI_C55_CONFIG_PONG, > >> @@ -224,6 +247,7 @@ struct mali_c55 { > >> struct mali_c55_isp isp; > >> struct mali_c55_resizer resizers[MALI_C55_NUM_RZRS]; > >> struct mali_c55_cap_dev cap_devs[MALI_C55_NUM_CAP_DEVS]; > >> + struct mali_c55_stats stats; > >> > >> struct list_head contexts; > >> enum mali_c55_config_spaces next_config; > >> @@ -245,6 +269,8 @@ int mali_c55_register_resizers(struct mali_c55 *mali_c55); > >> void mali_c55_unregister_resizers(struct mali_c55 *mali_c55); > >> int mali_c55_register_capture_devs(struct mali_c55 *mali_c55); > >> void mali_c55_unregister_capture_devs(struct mali_c55 *mali_c55); > >> +int mali_c55_register_stats(struct mali_c55 *mali_c55); > >> +void mali_c55_unregister_stats(struct mali_c55 *mali_c55); > >> struct mali_c55_ctx *mali_c55_get_active_context(struct mali_c55 *mali_c55); > >> void mali_c55_set_plane_done(struct mali_c55_cap_dev *cap_dev, > >> enum mali_c55_planes plane); > >> @@ -262,5 +288,7 @@ mali_c55_isp_fmt_next(const struct mali_c55_isp_fmt *fmt); > >> bool mali_c55_isp_is_format_supported(unsigned int mbus_code); > >> #define for_each_mali_isp_fmt(fmt)\ > >> for ((fmt) = NULL; ((fmt) = mali_c55_isp_fmt_next((fmt)));) > >> +void mali_c55_stats_fill_buffer(struct mali_c55 *mali_c55, > >> + enum mali_c55_config_spaces cfg_space); > >> > >> #endif /* _MALI_C55_COMMON_H */ > >> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c > >> index 50caf5ee7474..9ea70010876c 100644 > >> --- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c > >> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c > >> @@ -337,6 +337,16 @@ static int mali_c55_create_links(struct mali_c55 *mali_c55) > >> } > >> } > >> > >> + ret = media_create_pad_link(&mali_c55->isp.sd.entity, > >> + MALI_C55_ISP_PAD_SOURCE_3A, > >> + &mali_c55->stats.vdev.entity, 0, > >> + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); > >> + if (ret) { > >> + dev_err(mali_c55->dev, > >> + "failed to link ISP and 3a stats node\n"); > > > > s/3a stats/stats/ > > > >> + goto err_remove_links; > >> + } > >> + > >> return 0; > >> > >> err_remove_links: > >> @@ -350,6 +360,7 @@ static void mali_c55_unregister_entities(struct mali_c55 *mali_c55) > >> mali_c55_unregister_isp(mali_c55); > >> mali_c55_unregister_resizers(mali_c55); > >> mali_c55_unregister_capture_devs(mali_c55); > >> + mali_c55_unregister_stats(mali_c55); > >> } > >> > >> static int mali_c55_register_entities(struct mali_c55 *mali_c55) > >> @@ -372,6 +383,10 @@ static int mali_c55_register_entities(struct mali_c55 *mali_c55) > >> if (ret) > >> goto err_unregister_entities; > >> > >> + ret = mali_c55_register_stats(mali_c55); > >> + if (ret) > >> + goto err_unregister_entities; > >> + > >> ret = mali_c55_create_links(mali_c55); > >> if (ret) > >> goto err_unregister_entities; > >> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-isp.c b/drivers/media/platform/arm/mali-c55/mali-c55-isp.c > >> index ea8b7b866e7a..94876fba3353 100644 > >> --- a/drivers/media/platform/arm/mali-c55/mali-c55-isp.c > >> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-isp.c > >> @@ -564,6 +564,7 @@ int mali_c55_register_isp(struct mali_c55 *mali_c55) > >> isp->pads[MALI_C55_ISP_PAD_SINK_VIDEO].flags = MEDIA_PAD_FL_SINK; > >> isp->pads[MALI_C55_ISP_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; > >> isp->pads[MALI_C55_ISP_PAD_SOURCE_BYPASS].flags = MEDIA_PAD_FL_SOURCE; > >> + isp->pads[MALI_C55_ISP_PAD_SOURCE_3A].flags = MEDIA_PAD_FL_SOURCE; > >> > >> ret = media_entity_pads_init(&sd->entity, MALI_C55_ISP_NUM_PADS, > >> isp->pads); > >> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h > >> index cb27abde2aa5..eb3719245ec3 100644 > >> --- a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h > >> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h > >> @@ -68,6 +68,9 @@ > >> #define MALI_C55_VC_START(v) ((v) & 0xffff) > >> #define MALI_C55_VC_SIZE(v) (((v) & 0xffff) << 16) > >> > >> +#define MALI_C55_REG_1024BIN_HIST 0x054a8 > >> +#define MALI_C55_1024BIN_HIST_SIZE 4096 > >> + > >> /* Ping/Pong Configuration Space */ > >> #define MALI_C55_REG_BASE_ADDR 0x18e88 > >> #define MALI_C55_REG_BYPASS_0 0x18eac > >> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-stats.c b/drivers/media/platform/arm/mali-c55/mali-c55-stats.c > >> new file mode 100644 > >> index 000000000000..aa40480ed814 > >> --- /dev/null > >> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-stats.c > >> @@ -0,0 +1,350 @@ > >> +// SPDX-License-Identifier: GPL-2.0 > >> +/* > >> + * ARM Mali-C55 ISP Driver - 3A Statistics capture device > >> + * > >> + * Copyright (C) 2023 Ideas on Board Oy > >> + */ > >> + > >> +#include <linux/dmaengine.h> > >> +#include <linux/media/arm/mali-c55-config.h> > >> +#include <linux/spinlock.h> > > > > You're missing some headers here, for > > > > container_of() > > dev_err() > > list_*() > > mutex_init() > > strscpy() > > strscpy() > > > >> + > >> +#include <media/media-entity.h> > >> +#include <media/v4l2-dev.h> > >> +#include <media/v4l2-event.h> > >> +#include <media/v4l2-fh.h> > >> +#include <media/v4l2-ioctl.h> > >> +#include <media/videobuf2-core.h> > >> +#include <media/videobuf2-dma-contig.h> > >> + > >> +#include "mali-c55-common.h" > >> +#include "mali-c55-registers.h" > >> + > >> +static unsigned int metering_space_addrs[] = { > > > > const > > > >> + [MALI_C55_CONFIG_PING] = 0x095AC, > >> + [MALI_C55_CONFIG_PONG] = 0x2156C, > > > > Lower-case hex constants. > > > >> +}; > >> + > >> +static int mali_c55_stats_enum_fmt_meta_cap(struct file *file, void *fh, > >> + struct v4l2_fmtdesc *f) > >> +{ > >> + if (f->index || f->type != V4L2_BUF_TYPE_META_CAPTURE) > >> + return -EINVAL; > >> + > >> + f->pixelformat = V4L2_META_FMT_MALI_C55_3A_STATS; > > > > The format could be called V4L2_META_FMT_MALI_C55_STATS. While most > > statistics are related to one of the 3A algorithms, I think it would be > > better to name this generically. It's name bikeshedding only of course. > > > >> + > >> + return 0; > >> +} > >> + > >> +static int mali_c55_stats_g_fmt_meta_cap(struct file *file, void *fh, > >> + struct v4l2_format *f) > >> +{ > >> + static const struct v4l2_meta_format mfmt = { > >> + .dataformat = V4L2_META_FMT_MALI_C55_3A_STATS, > >> + .buffersize = sizeof(struct mali_c55_stats_buffer) > >> + }; > >> + > >> + if (f->type != V4L2_BUF_TYPE_META_CAPTURE) > >> + return -EINVAL; > >> + > >> + f->fmt.meta = mfmt; > >> + > >> + return 0; > >> +} > >> + > >> +static int mali_c55_stats_querycap(struct file *file, > >> + void *priv, struct v4l2_capability *cap) > >> +{ > >> + strscpy(cap->driver, MALI_C55_DRIVER_NAME, sizeof(cap->driver)); > >> + strscpy(cap->card, "ARM Mali-C55 ISP", sizeof(cap->card)); > >> + > >> + return 0; > >> +} > >> + > >> +static const struct v4l2_ioctl_ops mali_c55_stats_v4l2_ioctl_ops = { > >> + .vidioc_reqbufs = vb2_ioctl_reqbufs, > >> + .vidioc_querybuf = vb2_ioctl_querybuf, > >> + .vidioc_create_bufs = vb2_ioctl_create_bufs, > >> + .vidioc_qbuf = vb2_ioctl_qbuf, > >> + .vidioc_expbuf = vb2_ioctl_expbuf, > >> + .vidioc_dqbuf = vb2_ioctl_dqbuf, > >> + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, > >> + .vidioc_streamon = vb2_ioctl_streamon, > >> + .vidioc_streamoff = vb2_ioctl_streamoff, > >> + .vidioc_enum_fmt_meta_cap = mali_c55_stats_enum_fmt_meta_cap, > >> + .vidioc_g_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, > >> + .vidioc_s_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, > >> + .vidioc_try_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, > >> + .vidioc_querycap = mali_c55_stats_querycap, > >> + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, > >> + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, > >> +}; > >> + > >> +static const struct v4l2_file_operations mali_c55_stats_v4l2_fops = { > >> + .owner = THIS_MODULE, > >> + .unlocked_ioctl = video_ioctl2, > >> + .open = v4l2_fh_open, > >> + .release = vb2_fop_release, > >> + .poll = vb2_fop_poll, > >> + .mmap = vb2_fop_mmap, > >> +}; > >> + > >> +static int > >> +mali_c55_stats_queue_setup(struct vb2_queue *q, unsigned int *num_buffers, > >> + unsigned int *num_planes, unsigned int sizes[], > >> + struct device *alloc_devs[]) > >> +{ > >> + struct mali_c55_stats *stats = vb2_get_drv_priv(q); > >> + > >> + if (*num_planes && *num_planes > 1) > >> + return -EINVAL; > >> + > >> + if (sizes[0] && sizes[0] != sizeof(struct mali_c55_stats_buffer)) > >> + return -EINVAL; > >> + > >> + *num_planes = 1; > >> + sizes[0] = sizeof(struct mali_c55_stats_buffer); > >> + > >> + if (stats->channel) > >> + alloc_devs[0] = stats->channel->device->dev; > >> + > >> + return 0; > >> +} > >> + > >> +static void mali_c55_stats_buf_queue(struct vb2_buffer *vb) > >> +{ > >> + struct mali_c55_stats *stats = vb2_get_drv_priv(vb->vb2_queue); > >> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); > >> + struct mali_c55_stats_buf *buf = container_of(vbuf, > >> + struct mali_c55_stats_buf, vb); > >> + > >> + vb2_set_plane_payload(vb, 0, sizeof(struct mali_c55_stats_buffer)); > >> + buf->segments_remaining = 2; > >> + buf->failed = false; > >> + > >> + spin_lock(&stats->buffers.lock); > > > > Isn't the DMA completion handler run from IRQ context ? If so you'll > > need to use spin_lock_irq() here and in the other function that are > > not called with interrupts disabled. > > They're run in the bottom half of the interrupt handler; I'm under the > impression that that means the interrupts aren't disabled, and it's > safe to do...is that mistaken? I'm talking about the DMA completion handler, called by the DMA engine subsystem, not the IRQs of the C55 itself. > >> + list_add_tail(&buf->queue, &stats->buffers.queue); > >> + spin_unlock(&stats->buffers.lock); > >> +} > >> + > >> +static void mali_c55_stats_stop_streaming(struct vb2_queue *q) > >> +{ > >> + struct mali_c55_stats *stats = vb2_get_drv_priv(q); > >> + struct mali_c55_stats_buf *buf, *tmp; > >> + > >> + spin_lock(&stats->buffers.lock); > >> + > >> + list_for_each_entry_safe(buf, tmp, &stats->buffers.queue, queue) { > >> + list_del(&buf->queue); > >> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); > >> + } > >> + > >> + spin_unlock(&stats->buffers.lock); > >> +} > >> + > >> +static const struct vb2_ops mali_c55_stats_vb2_ops = { > >> + .queue_setup = mali_c55_stats_queue_setup, > >> + .buf_queue = mali_c55_stats_buf_queue, > >> + .wait_prepare = vb2_ops_wait_prepare, > >> + .wait_finish = vb2_ops_wait_finish, > >> + .stop_streaming = mali_c55_stats_stop_streaming, > >> +}; > >> + > >> +static void > >> +mali_c55_stats_metering_complete(void *param, > >> + const struct dmaengine_result *result) > >> +{ > >> + struct mali_c55_stats_buf *buf = param; > >> + > >> + spin_lock(&buf->lock); > > > > I wonder if this is needed. Can the DMA engine call the completion > > handlers of two sequential DMA transfers in parallel ? > > The DMA engine that's on the system we have can't...I wasn't sure > whether that was generically true. I think it is, but please double-check. > >> + > >> + if (buf->failed) > >> + goto out_unlock; > >> + > >> + buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns(); > >> + > >> + if (result->result != DMA_TRANS_NOERROR) { > >> + buf->failed = true; > >> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); > > > > This will possibly return the buffer to userspace after the first DMA > > transfer. Userspace could then requeue the buffer to the kernel before > > the completion of the second DMA transfer. That will cause trouble. I > > think you should instead do something like > > > > spin_lock(&buf->lock); > > > > if (result->result != DMA_TRANS_NOERROR) > > buf->failed = true; > > > > if (!--buf->segments_remaining) { > > buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns(); > > vb2_buffer_done(&buf->vb.vb2_buf, buf->failed ? > > VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE); > > } > > > > spin_unlock(&buf->lock); > > > > The > > > > buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns(); > > > > line could also be moved to mali_c55_stats_fill_buffer(), which would > > make sure the timestamp is filled in case of DMA submission failures. > > Okedokey > > > > >> + goto out_unlock; > >> + } > >> + > >> + if (!--buf->segments_remaining) > >> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); > >> + > >> +out_unlock: > >> + spin_unlock(&buf->lock); > >> +} > >> + > >> +static int mali_c55_stats_dma_xfer(struct mali_c55_stats *stats, dma_addr_t src, > >> + dma_addr_t dst, > >> + struct mali_c55_stats_buf *buf, > >> + size_t length, > >> + void (*callback)(void *, const struct dmaengine_result *result)) > > > > The same callback is used for both invocations of this function, you can > > drop the parameter and hardcode it below. > > Yeah, not even sure now why I had a parameter. > > >> +{ > >> + struct dma_async_tx_descriptor *tx; > >> + dma_cookie_t cookie; > >> + > >> + tx = dmaengine_prep_dma_memcpy(stats->channel, dst, src, length, 0); > >> + if (!tx) { > >> + dev_err(stats->mali_c55->dev, "failed to prep stats DMA\n"); > >> + return -EIO; > >> + } > >> + > >> + tx->callback_result = callback; > >> + tx->callback_param = buf; > >> + > >> + cookie = dmaengine_submit(tx); > >> + if (dma_submit_error(cookie)) { > >> + dev_err(stats->mali_c55->dev, "failed to submit stats DMA\n"); > >> + return -EIO; > >> + } > >> + > >> + dma_async_issue_pending(stats->channel); > >> + return 0; > >> +} > >> + > >> +void mali_c55_stats_fill_buffer(struct mali_c55 *mali_c55, > >> + enum mali_c55_config_spaces cfg_space) > >> +{ > >> + struct mali_c55_ctx *ctx = mali_c55_get_active_context(mali_c55); > >> + struct mali_c55_stats *stats = &mali_c55->stats; > >> + struct mali_c55_stats_buf *buf = NULL; > >> + dma_addr_t src, dst; > >> + int ret; > >> + > >> + spin_lock(&stats->buffers.lock); > >> + if (!list_empty(&stats->buffers.queue)) { > >> + buf = list_first_entry(&stats->buffers.queue, > >> + struct mali_c55_stats_buf, queue); > >> + list_del(&buf->queue); > >> + } > >> + spin_unlock(&stats->buffers.lock); > >> + > >> + if (!buf) > >> + return; > >> + > >> + buf->vb.sequence = mali_c55->isp.frame_sequence; > >> + > >> + /* > >> + * There are infact two noncontiguous sections of the ISP's > > > > s/infact/in fact/ > > > >> + * memory space that hold statistics for 3a algorithms to use. A > > > > s/use. A/use: a/ > > > >> + * section in each config space and a global section holding > >> + * histograms which is double buffered and so holds data for the > >> + * last frame. We need to read both. > >> + */ > >> + src = ctx->base + MALI_C55_REG_1024BIN_HIST; > >> + dst = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); > >> + > >> + ret = mali_c55_stats_dma_xfer(stats, src, dst, buf, > >> + MALI_C55_1024BIN_HIST_SIZE, > >> + mali_c55_stats_metering_complete); > >> + if (ret) > >> + goto err_fail_buffer; > >> + > >> + src = ctx->base + metering_space_addrs[cfg_space]; > >> + dst += MALI_C55_1024BIN_HIST_SIZE; > >> + > >> + ret = mali_c55_stats_dma_xfer( > >> + stats, src, dst, buf, > >> + sizeof(struct mali_c55_stats_buffer) - MALI_C55_1024BIN_HIST_SIZE, > >> + mali_c55_stats_metering_complete); > >> + if (ret) { > >> + dmaengine_terminate_sync(stats->channel); > >> + goto err_fail_buffer; > >> + } > > > > I think you will need to terminate DMA transfers at stream off time. > > > >> + > >> + return; > >> + > >> +err_fail_buffer: > >> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); > >> +} > >> + > >> +void mali_c55_unregister_stats(struct mali_c55 *mali_c55) > >> +{ > >> + struct mali_c55_stats *stats = &mali_c55->stats; > >> + > >> + if (!video_is_registered(&stats->vdev)) > >> + return; > >> + > >> + vb2_video_unregister_device(&stats->vdev); > >> + media_entity_cleanup(&stats->vdev.entity); > >> + dma_release_channel(stats->channel); > >> + mutex_destroy(&stats->lock); > >> +} > >> + > >> +int mali_c55_register_stats(struct mali_c55 *mali_c55) > >> +{ > >> + struct mali_c55_stats *stats = &mali_c55->stats; > >> + struct video_device *vdev = &stats->vdev; > >> + struct vb2_queue *vb2q = &stats->queue; > >> + dma_cap_mask_t mask; > >> + int ret; > >> + > >> + mutex_init(&stats->lock); > >> + INIT_LIST_HEAD(&stats->buffers.queue); > >> + > >> + dma_cap_zero(mask); > >> + dma_cap_set(DMA_MEMCPY, mask); > >> + > >> + stats->channel = dma_request_channel(mask, 0, NULL); > > > > Do we need a CPU fallback in case no DMA is available ? > > Yes, actually. > > > I'm still very curious to know how long it takes to perform the DMA > > transfer, compared to copying the data with the CPU, and especially > > compared to the frame duration. > > On my list of things to test and report :) Looking forward to it :-) > >> + if (!stats->channel) { > >> + ret = -ENODEV; > >> + goto err_destroy_mutex; > >> + } > >> + > >> + stats->pad.flags = MEDIA_PAD_FL_SINK; > >> + ret = media_entity_pads_init(&stats->vdev.entity, 1, &stats->pad); > >> + if (ret) > >> + goto err_release_dma_channel; > >> + > >> + vb2q->type = V4L2_BUF_TYPE_META_CAPTURE; > >> + vb2q->io_modes = VB2_MMAP | VB2_DMABUF; > >> + vb2q->drv_priv = stats; > >> + vb2q->mem_ops = &vb2_dma_contig_memops; > >> + vb2q->ops = &mali_c55_stats_vb2_ops; > >> + vb2q->buf_struct_size = sizeof(struct mali_c55_stats_buf); > >> + vb2q->min_queued_buffers = 1; > >> + vb2q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; > >> + vb2q->lock = &stats->lock; > >> + vb2q->dev = mali_c55->dev; > > > > That's not the right device. The device that performs the DMA operation > > is the DMA engine, and that's what you need to pass to vb2. Otherwise > > the DMA address returned by vb2_dma_contig_plane_dma_addr() will be > > mapped to the ISP device, not the DMA engine. In practice, if neither > > are behind an IOMMU, things will likely work, but when that's not the > > case, run into problems. > > > >> + > >> + ret = vb2_queue_init(vb2q); > >> + if (ret) { > >> + dev_err(mali_c55->dev, "stats vb2 queue init failed\n"); > >> + goto err_cleanup_entity; > >> + } > >> + > >> + strscpy(stats->vdev.name, "mali-c55 3a stats", sizeof(stats->vdev.name)); > > > > s/3a // > > > >> + vdev->release = video_device_release_empty; > > > > That's never right. You should refcount the data structures to ensure > > proper lifetime management. > > > >> + vdev->fops = &mali_c55_stats_v4l2_fops; > >> + vdev->ioctl_ops = &mali_c55_stats_v4l2_ioctl_ops; > >> + vdev->lock = &stats->lock; > >> + vdev->v4l2_dev = &mali_c55->v4l2_dev; > >> + vdev->queue = &stats->queue; > >> + vdev->device_caps = V4L2_CAP_META_CAPTURE | V4L2_CAP_STREAMING; > >> + vdev->vfl_dir = VFL_DIR_RX; > >> + video_set_drvdata(vdev, stats); > >> + > >> + ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1); > >> + if (ret) { > >> + dev_err(mali_c55->dev, > >> + "failed to register stats video device\n"); > >> + goto err_release_vb2q; > >> + } > >> + > >> + stats->mali_c55 = mali_c55; > >> + > >> + return 0; > >> + > >> +err_release_vb2q: > >> + vb2_queue_release(vb2q); > >> +err_cleanup_entity: > >> + media_entity_cleanup(&stats->vdev.entity); > >> +err_release_dma_channel: > >> + dma_release_channel(stats->channel); > >> +err_destroy_mutex: > >> + mutex_destroy(&stats->lock); > >> + > >> + return ret; > >> +}
Hi Laurent On 29/06/2024 16:04, Laurent Pinchart wrote: > Hi Dan, > > On Thu, Jun 20, 2024 at 04:10:01PM +0100, Daniel Scally wrote: >> On 16/06/2024 22:19, Laurent Pinchart wrote: >>> On Wed, May 29, 2024 at 04:28:52PM +0100, Daniel Scally wrote: >>>> Add a new code file to govern the 3a statistics capture node. >>>> >>>> Acked-by: Nayden Kanchev <nayden.kanchev@arm.com> >>>> Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> >>>> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> >>>> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> >>>> --- >>>> Changes in v5: >>>> >>>> - New patch >>>> >>>> drivers/media/platform/arm/mali-c55/Makefile | 3 +- >>>> .../platform/arm/mali-c55/mali-c55-common.h | 28 ++ >>>> .../platform/arm/mali-c55/mali-c55-core.c | 15 + >>>> .../platform/arm/mali-c55/mali-c55-isp.c | 1 + >>>> .../arm/mali-c55/mali-c55-registers.h | 3 + >>>> .../platform/arm/mali-c55/mali-c55-stats.c | 350 ++++++++++++++++++ >>>> 6 files changed, 399 insertions(+), 1 deletion(-) >>>> create mode 100644 drivers/media/platform/arm/mali-c55/mali-c55-stats.c >>>> >>>> diff --git a/drivers/media/platform/arm/mali-c55/Makefile b/drivers/media/platform/arm/mali-c55/Makefile >>>> index 77dcb2fbf0f4..cd5a64bf0c62 100644 >>>> --- a/drivers/media/platform/arm/mali-c55/Makefile >>>> +++ b/drivers/media/platform/arm/mali-c55/Makefile >>>> @@ -4,6 +4,7 @@ mali-c55-y := mali-c55-capture.o \ >>>> mali-c55-core.o \ >>>> mali-c55-isp.o \ >>>> mali-c55-tpg.o \ >>>> - mali-c55-resizer.o >>>> + mali-c55-resizer.o \ >>>> + mali-c55-stats.o >>>> >>>> obj-$(CONFIG_VIDEO_MALI_C55) += mali-c55.o >>>> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-common.h b/drivers/media/platform/arm/mali-c55/mali-c55-common.h >>>> index 2d0c4d152beb..44119e04009b 100644 >>>> --- a/drivers/media/platform/arm/mali-c55/mali-c55-common.h >>>> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-common.h >>>> @@ -79,6 +79,7 @@ enum mali_c55_isp_pads { >>>> MALI_C55_ISP_PAD_SINK_VIDEO, >>>> MALI_C55_ISP_PAD_SOURCE, >>>> MALI_C55_ISP_PAD_SOURCE_BYPASS, >>>> + MALI_C55_ISP_PAD_SOURCE_3A, >>> Functions and structures are named with a "stats" suffix, let's call >>> this MALI_C55_ISP_PAD_SOURCE_STATS. >>> >>>> MALI_C55_ISP_NUM_PADS, >>>> }; >>>> >>>> @@ -194,6 +195,28 @@ struct mali_c55_cap_dev { >>>> bool streaming; >>>> }; >>>> >>>> +struct mali_c55_stats_buf { >>>> + struct vb2_v4l2_buffer vb; >>>> + spinlock_t lock; >>> All locks require a comment to document what they protect. Same below. >>> >>>> + unsigned int segments_remaining; >>>> + struct list_head queue; >>>> + bool failed; >>>> +}; >>>> + >>>> +struct mali_c55_stats { >>>> + struct mali_c55 *mali_c55; >>>> + struct video_device vdev; >>>> + struct dma_chan *channel; >>>> + struct vb2_queue queue; >>>> + struct media_pad pad; >>>> + struct mutex lock; >>>> + >>>> + struct { >>>> + spinlock_t lock; >>>> + struct list_head queue; >>>> + } buffers; >>>> +}; >>>> + >>>> enum mali_c55_config_spaces { >>>> MALI_C55_CONFIG_PING, >>>> MALI_C55_CONFIG_PONG, >>>> @@ -224,6 +247,7 @@ struct mali_c55 { >>>> struct mali_c55_isp isp; >>>> struct mali_c55_resizer resizers[MALI_C55_NUM_RZRS]; >>>> struct mali_c55_cap_dev cap_devs[MALI_C55_NUM_CAP_DEVS]; >>>> + struct mali_c55_stats stats; >>>> >>>> struct list_head contexts; >>>> enum mali_c55_config_spaces next_config; >>>> @@ -245,6 +269,8 @@ int mali_c55_register_resizers(struct mali_c55 *mali_c55); >>>> void mali_c55_unregister_resizers(struct mali_c55 *mali_c55); >>>> int mali_c55_register_capture_devs(struct mali_c55 *mali_c55); >>>> void mali_c55_unregister_capture_devs(struct mali_c55 *mali_c55); >>>> +int mali_c55_register_stats(struct mali_c55 *mali_c55); >>>> +void mali_c55_unregister_stats(struct mali_c55 *mali_c55); >>>> struct mali_c55_ctx *mali_c55_get_active_context(struct mali_c55 *mali_c55); >>>> void mali_c55_set_plane_done(struct mali_c55_cap_dev *cap_dev, >>>> enum mali_c55_planes plane); >>>> @@ -262,5 +288,7 @@ mali_c55_isp_fmt_next(const struct mali_c55_isp_fmt *fmt); >>>> bool mali_c55_isp_is_format_supported(unsigned int mbus_code); >>>> #define for_each_mali_isp_fmt(fmt)\ >>>> for ((fmt) = NULL; ((fmt) = mali_c55_isp_fmt_next((fmt)));) >>>> +void mali_c55_stats_fill_buffer(struct mali_c55 *mali_c55, >>>> + enum mali_c55_config_spaces cfg_space); >>>> >>>> #endif /* _MALI_C55_COMMON_H */ >>>> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c >>>> index 50caf5ee7474..9ea70010876c 100644 >>>> --- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c >>>> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c >>>> @@ -337,6 +337,16 @@ static int mali_c55_create_links(struct mali_c55 *mali_c55) >>>> } >>>> } >>>> >>>> + ret = media_create_pad_link(&mali_c55->isp.sd.entity, >>>> + MALI_C55_ISP_PAD_SOURCE_3A, >>>> + &mali_c55->stats.vdev.entity, 0, >>>> + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); >>>> + if (ret) { >>>> + dev_err(mali_c55->dev, >>>> + "failed to link ISP and 3a stats node\n"); >>> s/3a stats/stats/ >>> >>>> + goto err_remove_links; >>>> + } >>>> + >>>> return 0; >>>> >>>> err_remove_links: >>>> @@ -350,6 +360,7 @@ static void mali_c55_unregister_entities(struct mali_c55 *mali_c55) >>>> mali_c55_unregister_isp(mali_c55); >>>> mali_c55_unregister_resizers(mali_c55); >>>> mali_c55_unregister_capture_devs(mali_c55); >>>> + mali_c55_unregister_stats(mali_c55); >>>> } >>>> >>>> static int mali_c55_register_entities(struct mali_c55 *mali_c55) >>>> @@ -372,6 +383,10 @@ static int mali_c55_register_entities(struct mali_c55 *mali_c55) >>>> if (ret) >>>> goto err_unregister_entities; >>>> >>>> + ret = mali_c55_register_stats(mali_c55); >>>> + if (ret) >>>> + goto err_unregister_entities; >>>> + >>>> ret = mali_c55_create_links(mali_c55); >>>> if (ret) >>>> goto err_unregister_entities; >>>> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-isp.c b/drivers/media/platform/arm/mali-c55/mali-c55-isp.c >>>> index ea8b7b866e7a..94876fba3353 100644 >>>> --- a/drivers/media/platform/arm/mali-c55/mali-c55-isp.c >>>> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-isp.c >>>> @@ -564,6 +564,7 @@ int mali_c55_register_isp(struct mali_c55 *mali_c55) >>>> isp->pads[MALI_C55_ISP_PAD_SINK_VIDEO].flags = MEDIA_PAD_FL_SINK; >>>> isp->pads[MALI_C55_ISP_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; >>>> isp->pads[MALI_C55_ISP_PAD_SOURCE_BYPASS].flags = MEDIA_PAD_FL_SOURCE; >>>> + isp->pads[MALI_C55_ISP_PAD_SOURCE_3A].flags = MEDIA_PAD_FL_SOURCE; >>>> >>>> ret = media_entity_pads_init(&sd->entity, MALI_C55_ISP_NUM_PADS, >>>> isp->pads); >>>> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h >>>> index cb27abde2aa5..eb3719245ec3 100644 >>>> --- a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h >>>> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h >>>> @@ -68,6 +68,9 @@ >>>> #define MALI_C55_VC_START(v) ((v) & 0xffff) >>>> #define MALI_C55_VC_SIZE(v) (((v) & 0xffff) << 16) >>>> >>>> +#define MALI_C55_REG_1024BIN_HIST 0x054a8 >>>> +#define MALI_C55_1024BIN_HIST_SIZE 4096 >>>> + >>>> /* Ping/Pong Configuration Space */ >>>> #define MALI_C55_REG_BASE_ADDR 0x18e88 >>>> #define MALI_C55_REG_BYPASS_0 0x18eac >>>> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-stats.c b/drivers/media/platform/arm/mali-c55/mali-c55-stats.c >>>> new file mode 100644 >>>> index 000000000000..aa40480ed814 >>>> --- /dev/null >>>> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-stats.c >>>> @@ -0,0 +1,350 @@ >>>> +// SPDX-License-Identifier: GPL-2.0 >>>> +/* >>>> + * ARM Mali-C55 ISP Driver - 3A Statistics capture device >>>> + * >>>> + * Copyright (C) 2023 Ideas on Board Oy >>>> + */ >>>> + >>>> +#include <linux/dmaengine.h> >>>> +#include <linux/media/arm/mali-c55-config.h> >>>> +#include <linux/spinlock.h> >>> You're missing some headers here, for >>> >>> container_of() >>> dev_err() >>> list_*() >>> mutex_init() >>> strscpy() >>> strscpy() >>> >>>> + >>>> +#include <media/media-entity.h> >>>> +#include <media/v4l2-dev.h> >>>> +#include <media/v4l2-event.h> >>>> +#include <media/v4l2-fh.h> >>>> +#include <media/v4l2-ioctl.h> >>>> +#include <media/videobuf2-core.h> >>>> +#include <media/videobuf2-dma-contig.h> >>>> + >>>> +#include "mali-c55-common.h" >>>> +#include "mali-c55-registers.h" >>>> + >>>> +static unsigned int metering_space_addrs[] = { >>> const >>> >>>> + [MALI_C55_CONFIG_PING] = 0x095AC, >>>> + [MALI_C55_CONFIG_PONG] = 0x2156C, >>> Lower-case hex constants. >>> >>>> +}; >>>> + >>>> +static int mali_c55_stats_enum_fmt_meta_cap(struct file *file, void *fh, >>>> + struct v4l2_fmtdesc *f) >>>> +{ >>>> + if (f->index || f->type != V4L2_BUF_TYPE_META_CAPTURE) >>>> + return -EINVAL; >>>> + >>>> + f->pixelformat = V4L2_META_FMT_MALI_C55_3A_STATS; >>> The format could be called V4L2_META_FMT_MALI_C55_STATS. While most >>> statistics are related to one of the 3A algorithms, I think it would be >>> better to name this generically. It's name bikeshedding only of course. >>> >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int mali_c55_stats_g_fmt_meta_cap(struct file *file, void *fh, >>>> + struct v4l2_format *f) >>>> +{ >>>> + static const struct v4l2_meta_format mfmt = { >>>> + .dataformat = V4L2_META_FMT_MALI_C55_3A_STATS, >>>> + .buffersize = sizeof(struct mali_c55_stats_buffer) >>>> + }; >>>> + >>>> + if (f->type != V4L2_BUF_TYPE_META_CAPTURE) >>>> + return -EINVAL; >>>> + >>>> + f->fmt.meta = mfmt; >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int mali_c55_stats_querycap(struct file *file, >>>> + void *priv, struct v4l2_capability *cap) >>>> +{ >>>> + strscpy(cap->driver, MALI_C55_DRIVER_NAME, sizeof(cap->driver)); >>>> + strscpy(cap->card, "ARM Mali-C55 ISP", sizeof(cap->card)); >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static const struct v4l2_ioctl_ops mali_c55_stats_v4l2_ioctl_ops = { >>>> + .vidioc_reqbufs = vb2_ioctl_reqbufs, >>>> + .vidioc_querybuf = vb2_ioctl_querybuf, >>>> + .vidioc_create_bufs = vb2_ioctl_create_bufs, >>>> + .vidioc_qbuf = vb2_ioctl_qbuf, >>>> + .vidioc_expbuf = vb2_ioctl_expbuf, >>>> + .vidioc_dqbuf = vb2_ioctl_dqbuf, >>>> + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, >>>> + .vidioc_streamon = vb2_ioctl_streamon, >>>> + .vidioc_streamoff = vb2_ioctl_streamoff, >>>> + .vidioc_enum_fmt_meta_cap = mali_c55_stats_enum_fmt_meta_cap, >>>> + .vidioc_g_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, >>>> + .vidioc_s_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, >>>> + .vidioc_try_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, >>>> + .vidioc_querycap = mali_c55_stats_querycap, >>>> + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, >>>> + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, >>>> +}; >>>> + >>>> +static const struct v4l2_file_operations mali_c55_stats_v4l2_fops = { >>>> + .owner = THIS_MODULE, >>>> + .unlocked_ioctl = video_ioctl2, >>>> + .open = v4l2_fh_open, >>>> + .release = vb2_fop_release, >>>> + .poll = vb2_fop_poll, >>>> + .mmap = vb2_fop_mmap, >>>> +}; >>>> + >>>> +static int >>>> +mali_c55_stats_queue_setup(struct vb2_queue *q, unsigned int *num_buffers, >>>> + unsigned int *num_planes, unsigned int sizes[], >>>> + struct device *alloc_devs[]) >>>> +{ >>>> + struct mali_c55_stats *stats = vb2_get_drv_priv(q); >>>> + >>>> + if (*num_planes && *num_planes > 1) >>>> + return -EINVAL; >>>> + >>>> + if (sizes[0] && sizes[0] != sizeof(struct mali_c55_stats_buffer)) >>>> + return -EINVAL; >>>> + >>>> + *num_planes = 1; >>>> + sizes[0] = sizeof(struct mali_c55_stats_buffer); >>>> + >>>> + if (stats->channel) >>>> + alloc_devs[0] = stats->channel->device->dev; >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static void mali_c55_stats_buf_queue(struct vb2_buffer *vb) >>>> +{ >>>> + struct mali_c55_stats *stats = vb2_get_drv_priv(vb->vb2_queue); >>>> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); >>>> + struct mali_c55_stats_buf *buf = container_of(vbuf, >>>> + struct mali_c55_stats_buf, vb); >>>> + >>>> + vb2_set_plane_payload(vb, 0, sizeof(struct mali_c55_stats_buffer)); >>>> + buf->segments_remaining = 2; >>>> + buf->failed = false; >>>> + >>>> + spin_lock(&stats->buffers.lock); >>> Isn't the DMA completion handler run from IRQ context ? If so you'll >>> need to use spin_lock_irq() here and in the other function that are >>> not called with interrupts disabled. >> They're run in the bottom half of the interrupt handler; I'm under the >> impression that that means the interrupts aren't disabled, and it's >> safe to do...is that mistaken? > I'm talking about the DMA completion handler, called by the DMA engine > subsystem, not the IRQs of the C55 itself. Ah! I follow you now sorry. Hm, that's an interesting thought...I think for the PL330 the answer is no; the interrupt handler wakes a thread that runs the callbacks for any DMA transfers that are completed...I don't know that that's a design rule we can rely on though so possibly it's better to be safe. Is there a disadvantage to using spin_lock_irq() outside of IRQ context? > >>>> + list_add_tail(&buf->queue, &stats->buffers.queue); >>>> + spin_unlock(&stats->buffers.lock); >>>> +} >>>> + >>>> +static void mali_c55_stats_stop_streaming(struct vb2_queue *q) >>>> +{ >>>> + struct mali_c55_stats *stats = vb2_get_drv_priv(q); >>>> + struct mali_c55_stats_buf *buf, *tmp; >>>> + >>>> + spin_lock(&stats->buffers.lock); >>>> + >>>> + list_for_each_entry_safe(buf, tmp, &stats->buffers.queue, queue) { >>>> + list_del(&buf->queue); >>>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); >>>> + } >>>> + >>>> + spin_unlock(&stats->buffers.lock); >>>> +} >>>> + >>>> +static const struct vb2_ops mali_c55_stats_vb2_ops = { >>>> + .queue_setup = mali_c55_stats_queue_setup, >>>> + .buf_queue = mali_c55_stats_buf_queue, >>>> + .wait_prepare = vb2_ops_wait_prepare, >>>> + .wait_finish = vb2_ops_wait_finish, >>>> + .stop_streaming = mali_c55_stats_stop_streaming, >>>> +}; >>>> + >>>> +static void >>>> +mali_c55_stats_metering_complete(void *param, >>>> + const struct dmaengine_result *result) >>>> +{ >>>> + struct mali_c55_stats_buf *buf = param; >>>> + >>>> + spin_lock(&buf->lock); >>> I wonder if this is needed. Can the DMA engine call the completion >>> handlers of two sequential DMA transfers in parallel ? >> The DMA engine that's on the system we have can't...I wasn't sure >> whether that was generically true. > I think it is, but please double-check. > >>>> + >>>> + if (buf->failed) >>>> + goto out_unlock; >>>> + >>>> + buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns(); >>>> + >>>> + if (result->result != DMA_TRANS_NOERROR) { >>>> + buf->failed = true; >>>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); >>> This will possibly return the buffer to userspace after the first DMA >>> transfer. Userspace could then requeue the buffer to the kernel before >>> the completion of the second DMA transfer. That will cause trouble. I >>> think you should instead do something like >>> >>> spin_lock(&buf->lock); >>> >>> if (result->result != DMA_TRANS_NOERROR) >>> buf->failed = true; >>> >>> if (!--buf->segments_remaining) { >>> buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns(); >>> vb2_buffer_done(&buf->vb.vb2_buf, buf->failed ? >>> VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE); >>> } >>> >>> spin_unlock(&buf->lock); >>> >>> The >>> >>> buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns(); >>> >>> line could also be moved to mali_c55_stats_fill_buffer(), which would >>> make sure the timestamp is filled in case of DMA submission failures. >> Okedokey >> >>>> + goto out_unlock; >>>> + } >>>> + >>>> + if (!--buf->segments_remaining) >>>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); >>>> + >>>> +out_unlock: >>>> + spin_unlock(&buf->lock); >>>> +} >>>> + >>>> +static int mali_c55_stats_dma_xfer(struct mali_c55_stats *stats, dma_addr_t src, >>>> + dma_addr_t dst, >>>> + struct mali_c55_stats_buf *buf, >>>> + size_t length, >>>> + void (*callback)(void *, const struct dmaengine_result *result)) >>> The same callback is used for both invocations of this function, you can >>> drop the parameter and hardcode it below. >> Yeah, not even sure now why I had a parameter. >> >>>> +{ >>>> + struct dma_async_tx_descriptor *tx; >>>> + dma_cookie_t cookie; >>>> + >>>> + tx = dmaengine_prep_dma_memcpy(stats->channel, dst, src, length, 0); >>>> + if (!tx) { >>>> + dev_err(stats->mali_c55->dev, "failed to prep stats DMA\n"); >>>> + return -EIO; >>>> + } >>>> + >>>> + tx->callback_result = callback; >>>> + tx->callback_param = buf; >>>> + >>>> + cookie = dmaengine_submit(tx); >>>> + if (dma_submit_error(cookie)) { >>>> + dev_err(stats->mali_c55->dev, "failed to submit stats DMA\n"); >>>> + return -EIO; >>>> + } >>>> + >>>> + dma_async_issue_pending(stats->channel); >>>> + return 0; >>>> +} >>>> + >>>> +void mali_c55_stats_fill_buffer(struct mali_c55 *mali_c55, >>>> + enum mali_c55_config_spaces cfg_space) >>>> +{ >>>> + struct mali_c55_ctx *ctx = mali_c55_get_active_context(mali_c55); >>>> + struct mali_c55_stats *stats = &mali_c55->stats; >>>> + struct mali_c55_stats_buf *buf = NULL; >>>> + dma_addr_t src, dst; >>>> + int ret; >>>> + >>>> + spin_lock(&stats->buffers.lock); >>>> + if (!list_empty(&stats->buffers.queue)) { >>>> + buf = list_first_entry(&stats->buffers.queue, >>>> + struct mali_c55_stats_buf, queue); >>>> + list_del(&buf->queue); >>>> + } >>>> + spin_unlock(&stats->buffers.lock); >>>> + >>>> + if (!buf) >>>> + return; >>>> + >>>> + buf->vb.sequence = mali_c55->isp.frame_sequence; >>>> + >>>> + /* >>>> + * There are infact two noncontiguous sections of the ISP's >>> s/infact/in fact/ >>> >>>> + * memory space that hold statistics for 3a algorithms to use. A >>> s/use. A/use: a/ >>> >>>> + * section in each config space and a global section holding >>>> + * histograms which is double buffered and so holds data for the >>>> + * last frame. We need to read both. >>>> + */ >>>> + src = ctx->base + MALI_C55_REG_1024BIN_HIST; >>>> + dst = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); >>>> + >>>> + ret = mali_c55_stats_dma_xfer(stats, src, dst, buf, >>>> + MALI_C55_1024BIN_HIST_SIZE, >>>> + mali_c55_stats_metering_complete); >>>> + if (ret) >>>> + goto err_fail_buffer; >>>> + >>>> + src = ctx->base + metering_space_addrs[cfg_space]; >>>> + dst += MALI_C55_1024BIN_HIST_SIZE; >>>> + >>>> + ret = mali_c55_stats_dma_xfer( >>>> + stats, src, dst, buf, >>>> + sizeof(struct mali_c55_stats_buffer) - MALI_C55_1024BIN_HIST_SIZE, >>>> + mali_c55_stats_metering_complete); >>>> + if (ret) { >>>> + dmaengine_terminate_sync(stats->channel); >>>> + goto err_fail_buffer; >>>> + } >>> I think you will need to terminate DMA transfers at stream off time. >>> >>>> + >>>> + return; >>>> + >>>> +err_fail_buffer: >>>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); >>>> +} >>>> + >>>> +void mali_c55_unregister_stats(struct mali_c55 *mali_c55) >>>> +{ >>>> + struct mali_c55_stats *stats = &mali_c55->stats; >>>> + >>>> + if (!video_is_registered(&stats->vdev)) >>>> + return; >>>> + >>>> + vb2_video_unregister_device(&stats->vdev); >>>> + media_entity_cleanup(&stats->vdev.entity); >>>> + dma_release_channel(stats->channel); >>>> + mutex_destroy(&stats->lock); >>>> +} >>>> + >>>> +int mali_c55_register_stats(struct mali_c55 *mali_c55) >>>> +{ >>>> + struct mali_c55_stats *stats = &mali_c55->stats; >>>> + struct video_device *vdev = &stats->vdev; >>>> + struct vb2_queue *vb2q = &stats->queue; >>>> + dma_cap_mask_t mask; >>>> + int ret; >>>> + >>>> + mutex_init(&stats->lock); >>>> + INIT_LIST_HEAD(&stats->buffers.queue); >>>> + >>>> + dma_cap_zero(mask); >>>> + dma_cap_set(DMA_MEMCPY, mask); >>>> + >>>> + stats->channel = dma_request_channel(mask, 0, NULL); >>> Do we need a CPU fallback in case no DMA is available ? >> Yes, actually. >> >>> I'm still very curious to know how long it takes to perform the DMA >>> transfer, compared to copying the data with the CPU, and especially >>> compared to the frame duration. >> On my list of things to test and report :) > Looking forward to it :-) > >>>> + if (!stats->channel) { >>>> + ret = -ENODEV; >>>> + goto err_destroy_mutex; >>>> + } >>>> + >>>> + stats->pad.flags = MEDIA_PAD_FL_SINK; >>>> + ret = media_entity_pads_init(&stats->vdev.entity, 1, &stats->pad); >>>> + if (ret) >>>> + goto err_release_dma_channel; >>>> + >>>> + vb2q->type = V4L2_BUF_TYPE_META_CAPTURE; >>>> + vb2q->io_modes = VB2_MMAP | VB2_DMABUF; >>>> + vb2q->drv_priv = stats; >>>> + vb2q->mem_ops = &vb2_dma_contig_memops; >>>> + vb2q->ops = &mali_c55_stats_vb2_ops; >>>> + vb2q->buf_struct_size = sizeof(struct mali_c55_stats_buf); >>>> + vb2q->min_queued_buffers = 1; >>>> + vb2q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; >>>> + vb2q->lock = &stats->lock; >>>> + vb2q->dev = mali_c55->dev; >>> That's not the right device. The device that performs the DMA operation >>> is the DMA engine, and that's what you need to pass to vb2. Otherwise >>> the DMA address returned by vb2_dma_contig_plane_dma_addr() will be >>> mapped to the ISP device, not the DMA engine. In practice, if neither >>> are behind an IOMMU, things will likely work, but when that's not the >>> case, run into problems. >>> >>>> + >>>> + ret = vb2_queue_init(vb2q); >>>> + if (ret) { >>>> + dev_err(mali_c55->dev, "stats vb2 queue init failed\n"); >>>> + goto err_cleanup_entity; >>>> + } >>>> + >>>> + strscpy(stats->vdev.name, "mali-c55 3a stats", sizeof(stats->vdev.name)); >>> s/3a // >>> >>>> + vdev->release = video_device_release_empty; >>> That's never right. You should refcount the data structures to ensure >>> proper lifetime management. >>> >>>> + vdev->fops = &mali_c55_stats_v4l2_fops; >>>> + vdev->ioctl_ops = &mali_c55_stats_v4l2_ioctl_ops; >>>> + vdev->lock = &stats->lock; >>>> + vdev->v4l2_dev = &mali_c55->v4l2_dev; >>>> + vdev->queue = &stats->queue; >>>> + vdev->device_caps = V4L2_CAP_META_CAPTURE | V4L2_CAP_STREAMING; >>>> + vdev->vfl_dir = VFL_DIR_RX; >>>> + video_set_drvdata(vdev, stats); >>>> + >>>> + ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1); >>>> + if (ret) { >>>> + dev_err(mali_c55->dev, >>>> + "failed to register stats video device\n"); >>>> + goto err_release_vb2q; >>>> + } >>>> + >>>> + stats->mali_c55 = mali_c55; >>>> + >>>> + return 0; >>>> + >>>> +err_release_vb2q: >>>> + vb2_queue_release(vb2q); >>>> +err_cleanup_entity: >>>> + media_entity_cleanup(&stats->vdev.entity); >>>> +err_release_dma_channel: >>>> + dma_release_channel(stats->channel); >>>> +err_destroy_mutex: >>>> + mutex_destroy(&stats->lock); >>>> + >>>> + return ret; >>>> +}
Morning Laurent On 01/07/2024 16:12, Dan Scally wrote: > Hi Laurent > > On 29/06/2024 16:04, Laurent Pinchart wrote: >> Hi Dan, >> >> On Thu, Jun 20, 2024 at 04:10:01PM +0100, Daniel Scally wrote: >>> On 16/06/2024 22:19, Laurent Pinchart wrote: >>>> On Wed, May 29, 2024 at 04:28:52PM +0100, Daniel Scally wrote: >>>>> Add a new code file to govern the 3a statistics capture node. >>>>> >>>>> Acked-by: Nayden Kanchev <nayden.kanchev@arm.com> >>>>> Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> >>>>> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> >>>>> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> >>>>> --- >>>>> Changes in v5: >>>>> >>>>> - New patch >>>>> >>>>> drivers/media/platform/arm/mali-c55/Makefile | 3 +- >>>>> .../platform/arm/mali-c55/mali-c55-common.h | 28 ++ >>>>> .../platform/arm/mali-c55/mali-c55-core.c | 15 + >>>>> .../platform/arm/mali-c55/mali-c55-isp.c | 1 + >>>>> .../arm/mali-c55/mali-c55-registers.h | 3 + >>>>> .../platform/arm/mali-c55/mali-c55-stats.c | 350 ++++++++++++++++++ >>>>> 6 files changed, 399 insertions(+), 1 deletion(-) >>>>> create mode 100644 drivers/media/platform/arm/mali-c55/mali-c55-stats.c >>>>> >>>>> diff --git a/drivers/media/platform/arm/mali-c55/Makefile >>>>> b/drivers/media/platform/arm/mali-c55/Makefile >>>>> index 77dcb2fbf0f4..cd5a64bf0c62 100644 >>>>> --- a/drivers/media/platform/arm/mali-c55/Makefile >>>>> +++ b/drivers/media/platform/arm/mali-c55/Makefile >>>>> @@ -4,6 +4,7 @@ mali-c55-y := mali-c55-capture.o \ >>>>> mali-c55-core.o \ >>>>> mali-c55-isp.o \ >>>>> mali-c55-tpg.o \ >>>>> - mali-c55-resizer.o >>>>> + mali-c55-resizer.o \ >>>>> + mali-c55-stats.o >>>>> obj-$(CONFIG_VIDEO_MALI_C55) += mali-c55.o >>>>> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-common.h >>>>> b/drivers/media/platform/arm/mali-c55/mali-c55-common.h >>>>> index 2d0c4d152beb..44119e04009b 100644 >>>>> --- a/drivers/media/platform/arm/mali-c55/mali-c55-common.h >>>>> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-common.h >>>>> @@ -79,6 +79,7 @@ enum mali_c55_isp_pads { >>>>> MALI_C55_ISP_PAD_SINK_VIDEO, >>>>> MALI_C55_ISP_PAD_SOURCE, >>>>> MALI_C55_ISP_PAD_SOURCE_BYPASS, >>>>> + MALI_C55_ISP_PAD_SOURCE_3A, >>>> Functions and structures are named with a "stats" suffix, let's call >>>> this MALI_C55_ISP_PAD_SOURCE_STATS. >>>> >>>>> MALI_C55_ISP_NUM_PADS, >>>>> }; >>>>> @@ -194,6 +195,28 @@ struct mali_c55_cap_dev { >>>>> bool streaming; >>>>> }; >>>>> +struct mali_c55_stats_buf { >>>>> + struct vb2_v4l2_buffer vb; >>>>> + spinlock_t lock; >>>> All locks require a comment to document what they protect. Same below. >>>> >>>>> + unsigned int segments_remaining; >>>>> + struct list_head queue; >>>>> + bool failed; >>>>> +}; >>>>> + >>>>> +struct mali_c55_stats { >>>>> + struct mali_c55 *mali_c55; >>>>> + struct video_device vdev; >>>>> + struct dma_chan *channel; >>>>> + struct vb2_queue queue; >>>>> + struct media_pad pad; >>>>> + struct mutex lock; >>>>> + >>>>> + struct { >>>>> + spinlock_t lock; >>>>> + struct list_head queue; >>>>> + } buffers; >>>>> +}; >>>>> + >>>>> enum mali_c55_config_spaces { >>>>> MALI_C55_CONFIG_PING, >>>>> MALI_C55_CONFIG_PONG, >>>>> @@ -224,6 +247,7 @@ struct mali_c55 { >>>>> struct mali_c55_isp isp; >>>>> struct mali_c55_resizer resizers[MALI_C55_NUM_RZRS]; >>>>> struct mali_c55_cap_dev cap_devs[MALI_C55_NUM_CAP_DEVS]; >>>>> + struct mali_c55_stats stats; >>>>> struct list_head contexts; >>>>> enum mali_c55_config_spaces next_config; >>>>> @@ -245,6 +269,8 @@ int mali_c55_register_resizers(struct mali_c55 *mali_c55); >>>>> void mali_c55_unregister_resizers(struct mali_c55 *mali_c55); >>>>> int mali_c55_register_capture_devs(struct mali_c55 *mali_c55); >>>>> void mali_c55_unregister_capture_devs(struct mali_c55 *mali_c55); >>>>> +int mali_c55_register_stats(struct mali_c55 *mali_c55); >>>>> +void mali_c55_unregister_stats(struct mali_c55 *mali_c55); >>>>> struct mali_c55_ctx *mali_c55_get_active_context(struct mali_c55 *mali_c55); >>>>> void mali_c55_set_plane_done(struct mali_c55_cap_dev *cap_dev, >>>>> enum mali_c55_planes plane); >>>>> @@ -262,5 +288,7 @@ mali_c55_isp_fmt_next(const struct mali_c55_isp_fmt *fmt); >>>>> bool mali_c55_isp_is_format_supported(unsigned int mbus_code); >>>>> #define for_each_mali_isp_fmt(fmt)\ >>>>> for ((fmt) = NULL; ((fmt) = mali_c55_isp_fmt_next((fmt)));) >>>>> +void mali_c55_stats_fill_buffer(struct mali_c55 *mali_c55, >>>>> + enum mali_c55_config_spaces cfg_space); >>>>> #endif /* _MALI_C55_COMMON_H */ >>>>> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c >>>>> b/drivers/media/platform/arm/mali-c55/mali-c55-core.c >>>>> index 50caf5ee7474..9ea70010876c 100644 >>>>> --- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c >>>>> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c >>>>> @@ -337,6 +337,16 @@ static int mali_c55_create_links(struct mali_c55 *mali_c55) >>>>> } >>>>> } >>>>> + ret = media_create_pad_link(&mali_c55->isp.sd.entity, >>>>> + MALI_C55_ISP_PAD_SOURCE_3A, >>>>> + &mali_c55->stats.vdev.entity, 0, >>>>> + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); >>>>> + if (ret) { >>>>> + dev_err(mali_c55->dev, >>>>> + "failed to link ISP and 3a stats node\n"); >>>> s/3a stats/stats/ >>>> >>>>> + goto err_remove_links; >>>>> + } >>>>> + >>>>> return 0; >>>>> err_remove_links: >>>>> @@ -350,6 +360,7 @@ static void mali_c55_unregister_entities(struct mali_c55 *mali_c55) >>>>> mali_c55_unregister_isp(mali_c55); >>>>> mali_c55_unregister_resizers(mali_c55); >>>>> mali_c55_unregister_capture_devs(mali_c55); >>>>> + mali_c55_unregister_stats(mali_c55); >>>>> } >>>>> static int mali_c55_register_entities(struct mali_c55 *mali_c55) >>>>> @@ -372,6 +383,10 @@ static int mali_c55_register_entities(struct mali_c55 *mali_c55) >>>>> if (ret) >>>>> goto err_unregister_entities; >>>>> + ret = mali_c55_register_stats(mali_c55); >>>>> + if (ret) >>>>> + goto err_unregister_entities; >>>>> + >>>>> ret = mali_c55_create_links(mali_c55); >>>>> if (ret) >>>>> goto err_unregister_entities; >>>>> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-isp.c >>>>> b/drivers/media/platform/arm/mali-c55/mali-c55-isp.c >>>>> index ea8b7b866e7a..94876fba3353 100644 >>>>> --- a/drivers/media/platform/arm/mali-c55/mali-c55-isp.c >>>>> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-isp.c >>>>> @@ -564,6 +564,7 @@ int mali_c55_register_isp(struct mali_c55 *mali_c55) >>>>> isp->pads[MALI_C55_ISP_PAD_SINK_VIDEO].flags = MEDIA_PAD_FL_SINK; >>>>> isp->pads[MALI_C55_ISP_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; >>>>> isp->pads[MALI_C55_ISP_PAD_SOURCE_BYPASS].flags = MEDIA_PAD_FL_SOURCE; >>>>> + isp->pads[MALI_C55_ISP_PAD_SOURCE_3A].flags = MEDIA_PAD_FL_SOURCE; >>>>> ret = media_entity_pads_init(&sd->entity, MALI_C55_ISP_NUM_PADS, >>>>> isp->pads); >>>>> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h >>>>> b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h >>>>> index cb27abde2aa5..eb3719245ec3 100644 >>>>> --- a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h >>>>> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h >>>>> @@ -68,6 +68,9 @@ >>>>> #define MALI_C55_VC_START(v) ((v) & 0xffff) >>>>> #define MALI_C55_VC_SIZE(v) (((v) & 0xffff) << 16) >>>>> +#define MALI_C55_REG_1024BIN_HIST 0x054a8 >>>>> +#define MALI_C55_1024BIN_HIST_SIZE 4096 >>>>> + >>>>> /* Ping/Pong Configuration Space */ >>>>> #define MALI_C55_REG_BASE_ADDR 0x18e88 >>>>> #define MALI_C55_REG_BYPASS_0 0x18eac >>>>> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-stats.c >>>>> b/drivers/media/platform/arm/mali-c55/mali-c55-stats.c >>>>> new file mode 100644 >>>>> index 000000000000..aa40480ed814 >>>>> --- /dev/null >>>>> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-stats.c >>>>> @@ -0,0 +1,350 @@ >>>>> +// SPDX-License-Identifier: GPL-2.0 >>>>> +/* >>>>> + * ARM Mali-C55 ISP Driver - 3A Statistics capture device >>>>> + * >>>>> + * Copyright (C) 2023 Ideas on Board Oy >>>>> + */ >>>>> + >>>>> +#include <linux/dmaengine.h> >>>>> +#include <linux/media/arm/mali-c55-config.h> >>>>> +#include <linux/spinlock.h> >>>> You're missing some headers here, for >>>> >>>> container_of() >>>> dev_err() >>>> list_*() >>>> mutex_init() >>>> strscpy() >>>> strscpy() >>>> >>>>> + >>>>> +#include <media/media-entity.h> >>>>> +#include <media/v4l2-dev.h> >>>>> +#include <media/v4l2-event.h> >>>>> +#include <media/v4l2-fh.h> >>>>> +#include <media/v4l2-ioctl.h> >>>>> +#include <media/videobuf2-core.h> >>>>> +#include <media/videobuf2-dma-contig.h> >>>>> + >>>>> +#include "mali-c55-common.h" >>>>> +#include "mali-c55-registers.h" >>>>> + >>>>> +static unsigned int metering_space_addrs[] = { >>>> const >>>> >>>>> + [MALI_C55_CONFIG_PING] = 0x095AC, >>>>> + [MALI_C55_CONFIG_PONG] = 0x2156C, >>>> Lower-case hex constants. >>>> >>>>> +}; >>>>> + >>>>> +static int mali_c55_stats_enum_fmt_meta_cap(struct file *file, void *fh, >>>>> + struct v4l2_fmtdesc *f) >>>>> +{ >>>>> + if (f->index || f->type != V4L2_BUF_TYPE_META_CAPTURE) >>>>> + return -EINVAL; >>>>> + >>>>> + f->pixelformat = V4L2_META_FMT_MALI_C55_3A_STATS; >>>> The format could be called V4L2_META_FMT_MALI_C55_STATS. While most >>>> statistics are related to one of the 3A algorithms, I think it would be >>>> better to name this generically. It's name bikeshedding only of course. >>>> >>>>> + >>>>> + return 0; >>>>> +} >>>>> + >>>>> +static int mali_c55_stats_g_fmt_meta_cap(struct file *file, void *fh, >>>>> + struct v4l2_format *f) >>>>> +{ >>>>> + static const struct v4l2_meta_format mfmt = { >>>>> + .dataformat = V4L2_META_FMT_MALI_C55_3A_STATS, >>>>> + .buffersize = sizeof(struct mali_c55_stats_buffer) >>>>> + }; >>>>> + >>>>> + if (f->type != V4L2_BUF_TYPE_META_CAPTURE) >>>>> + return -EINVAL; >>>>> + >>>>> + f->fmt.meta = mfmt; >>>>> + >>>>> + return 0; >>>>> +} >>>>> + >>>>> +static int mali_c55_stats_querycap(struct file *file, >>>>> + void *priv, struct v4l2_capability *cap) >>>>> +{ >>>>> + strscpy(cap->driver, MALI_C55_DRIVER_NAME, sizeof(cap->driver)); >>>>> + strscpy(cap->card, "ARM Mali-C55 ISP", sizeof(cap->card)); >>>>> + >>>>> + return 0; >>>>> +} >>>>> + >>>>> +static const struct v4l2_ioctl_ops mali_c55_stats_v4l2_ioctl_ops = { >>>>> + .vidioc_reqbufs = vb2_ioctl_reqbufs, >>>>> + .vidioc_querybuf = vb2_ioctl_querybuf, >>>>> + .vidioc_create_bufs = vb2_ioctl_create_bufs, >>>>> + .vidioc_qbuf = vb2_ioctl_qbuf, >>>>> + .vidioc_expbuf = vb2_ioctl_expbuf, >>>>> + .vidioc_dqbuf = vb2_ioctl_dqbuf, >>>>> + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, >>>>> + .vidioc_streamon = vb2_ioctl_streamon, >>>>> + .vidioc_streamoff = vb2_ioctl_streamoff, >>>>> + .vidioc_enum_fmt_meta_cap = mali_c55_stats_enum_fmt_meta_cap, >>>>> + .vidioc_g_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, >>>>> + .vidioc_s_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, >>>>> + .vidioc_try_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, >>>>> + .vidioc_querycap = mali_c55_stats_querycap, >>>>> + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, >>>>> + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, >>>>> +}; >>>>> + >>>>> +static const struct v4l2_file_operations mali_c55_stats_v4l2_fops = { >>>>> + .owner = THIS_MODULE, >>>>> + .unlocked_ioctl = video_ioctl2, >>>>> + .open = v4l2_fh_open, >>>>> + .release = vb2_fop_release, >>>>> + .poll = vb2_fop_poll, >>>>> + .mmap = vb2_fop_mmap, >>>>> +}; >>>>> + >>>>> +static int >>>>> +mali_c55_stats_queue_setup(struct vb2_queue *q, unsigned int *num_buffers, >>>>> + unsigned int *num_planes, unsigned int sizes[], >>>>> + struct device *alloc_devs[]) >>>>> +{ >>>>> + struct mali_c55_stats *stats = vb2_get_drv_priv(q); >>>>> + >>>>> + if (*num_planes && *num_planes > 1) >>>>> + return -EINVAL; >>>>> + >>>>> + if (sizes[0] && sizes[0] != sizeof(struct mali_c55_stats_buffer)) >>>>> + return -EINVAL; >>>>> + >>>>> + *num_planes = 1; >>>>> + sizes[0] = sizeof(struct mali_c55_stats_buffer); >>>>> + >>>>> + if (stats->channel) >>>>> + alloc_devs[0] = stats->channel->device->dev; >>>>> + >>>>> + return 0; >>>>> +} >>>>> + >>>>> +static void mali_c55_stats_buf_queue(struct vb2_buffer *vb) >>>>> +{ >>>>> + struct mali_c55_stats *stats = vb2_get_drv_priv(vb->vb2_queue); >>>>> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); >>>>> + struct mali_c55_stats_buf *buf = container_of(vbuf, >>>>> + struct mali_c55_stats_buf, vb); >>>>> + >>>>> + vb2_set_plane_payload(vb, 0, sizeof(struct mali_c55_stats_buffer)); >>>>> + buf->segments_remaining = 2; >>>>> + buf->failed = false; >>>>> + >>>>> + spin_lock(&stats->buffers.lock); >>>> Isn't the DMA completion handler run from IRQ context ? If so you'll >>>> need to use spin_lock_irq() here and in the other function that are >>>> not called with interrupts disabled. >>> They're run in the bottom half of the interrupt handler; I'm under the >>> impression that that means the interrupts aren't disabled, and it's >>> safe to do...is that mistaken? >> I'm talking about the DMA completion handler, called by the DMA engine >> subsystem, not the IRQs of the C55 itself. > > > Ah! I follow you now sorry. Hm, that's an interesting thought...I think for the PL330 the answer > is no; the interrupt handler wakes a thread that runs the callbacks for any DMA transfers that are > completed...I don't know that that's a design rule we can rely on though so possibly it's better > to be safe. Is there a disadvantage to using spin_lock_irq() outside of IRQ context? Actually I think from [1] that the answer is they're not run from interrupt context, the page says "Note that callbacks will always be invoked from the DMA engine's tasklet, never from interrupt context". [1] Documentation/driver-api/dmaengine/client.rst > >> >>>>> + list_add_tail(&buf->queue, &stats->buffers.queue); >>>>> + spin_unlock(&stats->buffers.lock); >>>>> +} >>>>> + >>>>> +static void mali_c55_stats_stop_streaming(struct vb2_queue *q) >>>>> +{ >>>>> + struct mali_c55_stats *stats = vb2_get_drv_priv(q); >>>>> + struct mali_c55_stats_buf *buf, *tmp; >>>>> + >>>>> + spin_lock(&stats->buffers.lock); >>>>> + >>>>> + list_for_each_entry_safe(buf, tmp, &stats->buffers.queue, queue) { >>>>> + list_del(&buf->queue); >>>>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); >>>>> + } >>>>> + >>>>> + spin_unlock(&stats->buffers.lock); >>>>> +} >>>>> + >>>>> +static const struct vb2_ops mali_c55_stats_vb2_ops = { >>>>> + .queue_setup = mali_c55_stats_queue_setup, >>>>> + .buf_queue = mali_c55_stats_buf_queue, >>>>> + .wait_prepare = vb2_ops_wait_prepare, >>>>> + .wait_finish = vb2_ops_wait_finish, >>>>> + .stop_streaming = mali_c55_stats_stop_streaming, >>>>> +}; >>>>> + >>>>> +static void >>>>> +mali_c55_stats_metering_complete(void *param, >>>>> + const struct dmaengine_result *result) >>>>> +{ >>>>> + struct mali_c55_stats_buf *buf = param; >>>>> + >>>>> + spin_lock(&buf->lock); >>>> I wonder if this is needed. Can the DMA engine call the completion >>>> handlers of two sequential DMA transfers in parallel ? >>> The DMA engine that's on the system we have can't...I wasn't sure >>> whether that was generically true. >> I think it is, but please double-check. >> >>>>> + >>>>> + if (buf->failed) >>>>> + goto out_unlock; >>>>> + >>>>> + buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns(); >>>>> + >>>>> + if (result->result != DMA_TRANS_NOERROR) { >>>>> + buf->failed = true; >>>>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); >>>> This will possibly return the buffer to userspace after the first DMA >>>> transfer. Userspace could then requeue the buffer to the kernel before >>>> the completion of the second DMA transfer. That will cause trouble. I >>>> think you should instead do something like >>>> >>>> spin_lock(&buf->lock); >>>> >>>> if (result->result != DMA_TRANS_NOERROR) >>>> buf->failed = true; >>>> >>>> if (!--buf->segments_remaining) { >>>> buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns(); >>>> vb2_buffer_done(&buf->vb.vb2_buf, buf->failed ? >>>> VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE); >>>> } >>>> >>>> spin_unlock(&buf->lock); >>>> >>>> The >>>> >>>> buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns(); >>>> >>>> line could also be moved to mali_c55_stats_fill_buffer(), which would >>>> make sure the timestamp is filled in case of DMA submission failures. >>> Okedokey >>> >>>>> + goto out_unlock; >>>>> + } >>>>> + >>>>> + if (!--buf->segments_remaining) >>>>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); >>>>> + >>>>> +out_unlock: >>>>> + spin_unlock(&buf->lock); >>>>> +} >>>>> + >>>>> +static int mali_c55_stats_dma_xfer(struct mali_c55_stats *stats, dma_addr_t src, >>>>> + dma_addr_t dst, >>>>> + struct mali_c55_stats_buf *buf, >>>>> + size_t length, >>>>> + void (*callback)(void *, const struct dmaengine_result *result)) >>>> The same callback is used for both invocations of this function, you can >>>> drop the parameter and hardcode it below. >>> Yeah, not even sure now why I had a parameter. >>> >>>>> +{ >>>>> + struct dma_async_tx_descriptor *tx; >>>>> + dma_cookie_t cookie; >>>>> + >>>>> + tx = dmaengine_prep_dma_memcpy(stats->channel, dst, src, length, 0); >>>>> + if (!tx) { >>>>> + dev_err(stats->mali_c55->dev, "failed to prep stats DMA\n"); >>>>> + return -EIO; >>>>> + } >>>>> + >>>>> + tx->callback_result = callback; >>>>> + tx->callback_param = buf; >>>>> + >>>>> + cookie = dmaengine_submit(tx); >>>>> + if (dma_submit_error(cookie)) { >>>>> + dev_err(stats->mali_c55->dev, "failed to submit stats DMA\n"); >>>>> + return -EIO; >>>>> + } >>>>> + >>>>> + dma_async_issue_pending(stats->channel); >>>>> + return 0; >>>>> +} >>>>> + >>>>> +void mali_c55_stats_fill_buffer(struct mali_c55 *mali_c55, >>>>> + enum mali_c55_config_spaces cfg_space) >>>>> +{ >>>>> + struct mali_c55_ctx *ctx = mali_c55_get_active_context(mali_c55); >>>>> + struct mali_c55_stats *stats = &mali_c55->stats; >>>>> + struct mali_c55_stats_buf *buf = NULL; >>>>> + dma_addr_t src, dst; >>>>> + int ret; >>>>> + >>>>> + spin_lock(&stats->buffers.lock); >>>>> + if (!list_empty(&stats->buffers.queue)) { >>>>> + buf = list_first_entry(&stats->buffers.queue, >>>>> + struct mali_c55_stats_buf, queue); >>>>> + list_del(&buf->queue); >>>>> + } >>>>> + spin_unlock(&stats->buffers.lock); >>>>> + >>>>> + if (!buf) >>>>> + return; >>>>> + >>>>> + buf->vb.sequence = mali_c55->isp.frame_sequence; >>>>> + >>>>> + /* >>>>> + * There are infact two noncontiguous sections of the ISP's >>>> s/infact/in fact/ >>>> >>>>> + * memory space that hold statistics for 3a algorithms to use. A >>>> s/use. A/use: a/ >>>> >>>>> + * section in each config space and a global section holding >>>>> + * histograms which is double buffered and so holds data for the >>>>> + * last frame. We need to read both. >>>>> + */ >>>>> + src = ctx->base + MALI_C55_REG_1024BIN_HIST; >>>>> + dst = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); >>>>> + >>>>> + ret = mali_c55_stats_dma_xfer(stats, src, dst, buf, >>>>> + MALI_C55_1024BIN_HIST_SIZE, >>>>> + mali_c55_stats_metering_complete); >>>>> + if (ret) >>>>> + goto err_fail_buffer; >>>>> + >>>>> + src = ctx->base + metering_space_addrs[cfg_space]; >>>>> + dst += MALI_C55_1024BIN_HIST_SIZE; >>>>> + >>>>> + ret = mali_c55_stats_dma_xfer( >>>>> + stats, src, dst, buf, >>>>> + sizeof(struct mali_c55_stats_buffer) - MALI_C55_1024BIN_HIST_SIZE, >>>>> + mali_c55_stats_metering_complete); >>>>> + if (ret) { >>>>> + dmaengine_terminate_sync(stats->channel); >>>>> + goto err_fail_buffer; >>>>> + } >>>> I think you will need to terminate DMA transfers at stream off time. >>>> >>>>> + >>>>> + return; >>>>> + >>>>> +err_fail_buffer: >>>>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); >>>>> +} >>>>> + >>>>> +void mali_c55_unregister_stats(struct mali_c55 *mali_c55) >>>>> +{ >>>>> + struct mali_c55_stats *stats = &mali_c55->stats; >>>>> + >>>>> + if (!video_is_registered(&stats->vdev)) >>>>> + return; >>>>> + >>>>> + vb2_video_unregister_device(&stats->vdev); >>>>> + media_entity_cleanup(&stats->vdev.entity); >>>>> + dma_release_channel(stats->channel); >>>>> + mutex_destroy(&stats->lock); >>>>> +} >>>>> + >>>>> +int mali_c55_register_stats(struct mali_c55 *mali_c55) >>>>> +{ >>>>> + struct mali_c55_stats *stats = &mali_c55->stats; >>>>> + struct video_device *vdev = &stats->vdev; >>>>> + struct vb2_queue *vb2q = &stats->queue; >>>>> + dma_cap_mask_t mask; >>>>> + int ret; >>>>> + >>>>> + mutex_init(&stats->lock); >>>>> + INIT_LIST_HEAD(&stats->buffers.queue); >>>>> + >>>>> + dma_cap_zero(mask); >>>>> + dma_cap_set(DMA_MEMCPY, mask); >>>>> + >>>>> + stats->channel = dma_request_channel(mask, 0, NULL); >>>> Do we need a CPU fallback in case no DMA is available ? >>> Yes, actually. >>> >>>> I'm still very curious to know how long it takes to perform the DMA >>>> transfer, compared to copying the data with the CPU, and especially >>>> compared to the frame duration. >>> On my list of things to test and report :) >> Looking forward to it :-) >> >>>>> + if (!stats->channel) { >>>>> + ret = -ENODEV; >>>>> + goto err_destroy_mutex; >>>>> + } >>>>> + >>>>> + stats->pad.flags = MEDIA_PAD_FL_SINK; >>>>> + ret = media_entity_pads_init(&stats->vdev.entity, 1, &stats->pad); >>>>> + if (ret) >>>>> + goto err_release_dma_channel; >>>>> + >>>>> + vb2q->type = V4L2_BUF_TYPE_META_CAPTURE; >>>>> + vb2q->io_modes = VB2_MMAP | VB2_DMABUF; >>>>> + vb2q->drv_priv = stats; >>>>> + vb2q->mem_ops = &vb2_dma_contig_memops; >>>>> + vb2q->ops = &mali_c55_stats_vb2_ops; >>>>> + vb2q->buf_struct_size = sizeof(struct mali_c55_stats_buf); >>>>> + vb2q->min_queued_buffers = 1; >>>>> + vb2q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; >>>>> + vb2q->lock = &stats->lock; >>>>> + vb2q->dev = mali_c55->dev; >>>> That's not the right device. The device that performs the DMA operation >>>> is the DMA engine, and that's what you need to pass to vb2. Otherwise >>>> the DMA address returned by vb2_dma_contig_plane_dma_addr() will be >>>> mapped to the ISP device, not the DMA engine. In practice, if neither >>>> are behind an IOMMU, things will likely work, but when that's not the >>>> case, run into problems. >>>> >>>>> + >>>>> + ret = vb2_queue_init(vb2q); >>>>> + if (ret) { >>>>> + dev_err(mali_c55->dev, "stats vb2 queue init failed\n"); >>>>> + goto err_cleanup_entity; >>>>> + } >>>>> + >>>>> + strscpy(stats->vdev.name, "mali-c55 3a stats", sizeof(stats->vdev.name)); >>>> s/3a // >>>> >>>>> + vdev->release = video_device_release_empty; >>>> That's never right. You should refcount the data structures to ensure >>>> proper lifetime management. >>>> >>>>> + vdev->fops = &mali_c55_stats_v4l2_fops; >>>>> + vdev->ioctl_ops = &mali_c55_stats_v4l2_ioctl_ops; >>>>> + vdev->lock = &stats->lock; >>>>> + vdev->v4l2_dev = &mali_c55->v4l2_dev; >>>>> + vdev->queue = &stats->queue; >>>>> + vdev->device_caps = V4L2_CAP_META_CAPTURE | V4L2_CAP_STREAMING; >>>>> + vdev->vfl_dir = VFL_DIR_RX; >>>>> + video_set_drvdata(vdev, stats); >>>>> + >>>>> + ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1); >>>>> + if (ret) { >>>>> + dev_err(mali_c55->dev, >>>>> + "failed to register stats video device\n"); >>>>> + goto err_release_vb2q; >>>>> + } >>>>> + >>>>> + stats->mali_c55 = mali_c55; >>>>> + >>>>> + return 0; >>>>> + >>>>> +err_release_vb2q: >>>>> + vb2_queue_release(vb2q); >>>>> +err_cleanup_entity: >>>>> + media_entity_cleanup(&stats->vdev.entity); >>>>> +err_release_dma_channel: >>>>> + dma_release_channel(stats->channel); >>>>> +err_destroy_mutex: >>>>> + mutex_destroy(&stats->lock); >>>>> + >>>>> + return ret; >>>>> +}
Hi Dan, On Tue, Jul 02, 2024 at 08:00:27AM +0100, Daniel Scally wrote: > On 01/07/2024 16:12, Dan Scally wrote: > > On 29/06/2024 16:04, Laurent Pinchart wrote: > >> On Thu, Jun 20, 2024 at 04:10:01PM +0100, Daniel Scally wrote: > >>> On 16/06/2024 22:19, Laurent Pinchart wrote: > >>>> On Wed, May 29, 2024 at 04:28:52PM +0100, Daniel Scally wrote: > >>>>> Add a new code file to govern the 3a statistics capture node. > >>>>> > >>>>> Acked-by: Nayden Kanchev <nayden.kanchev@arm.com> > >>>>> Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> > >>>>> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> > >>>>> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> > >>>>> --- > >>>>> Changes in v5: > >>>>> > >>>>> - New patch > >>>>> > >>>>> drivers/media/platform/arm/mali-c55/Makefile | 3 +- > >>>>> .../platform/arm/mali-c55/mali-c55-common.h | 28 ++ > >>>>> .../platform/arm/mali-c55/mali-c55-core.c | 15 + > >>>>> .../platform/arm/mali-c55/mali-c55-isp.c | 1 + > >>>>> .../arm/mali-c55/mali-c55-registers.h | 3 + > >>>>> .../platform/arm/mali-c55/mali-c55-stats.c | 350 ++++++++++++++++++ > >>>>> 6 files changed, 399 insertions(+), 1 deletion(-) > >>>>> create mode 100644 drivers/media/platform/arm/mali-c55/mali-c55-stats.c > >>>>> > >>>>> diff --git a/drivers/media/platform/arm/mali-c55/Makefile > >>>>> b/drivers/media/platform/arm/mali-c55/Makefile > >>>>> index 77dcb2fbf0f4..cd5a64bf0c62 100644 > >>>>> --- a/drivers/media/platform/arm/mali-c55/Makefile > >>>>> +++ b/drivers/media/platform/arm/mali-c55/Makefile > >>>>> @@ -4,6 +4,7 @@ mali-c55-y := mali-c55-capture.o \ > >>>>> mali-c55-core.o \ > >>>>> mali-c55-isp.o \ > >>>>> mali-c55-tpg.o \ > >>>>> - mali-c55-resizer.o > >>>>> + mali-c55-resizer.o \ > >>>>> + mali-c55-stats.o > >>>>> obj-$(CONFIG_VIDEO_MALI_C55) += mali-c55.o > >>>>> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-common.h > >>>>> b/drivers/media/platform/arm/mali-c55/mali-c55-common.h > >>>>> index 2d0c4d152beb..44119e04009b 100644 > >>>>> --- a/drivers/media/platform/arm/mali-c55/mali-c55-common.h > >>>>> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-common.h > >>>>> @@ -79,6 +79,7 @@ enum mali_c55_isp_pads { > >>>>> MALI_C55_ISP_PAD_SINK_VIDEO, > >>>>> MALI_C55_ISP_PAD_SOURCE, > >>>>> MALI_C55_ISP_PAD_SOURCE_BYPASS, > >>>>> + MALI_C55_ISP_PAD_SOURCE_3A, > >>>> Functions and structures are named with a "stats" suffix, let's call > >>>> this MALI_C55_ISP_PAD_SOURCE_STATS. > >>>> > >>>>> MALI_C55_ISP_NUM_PADS, > >>>>> }; > >>>>> @@ -194,6 +195,28 @@ struct mali_c55_cap_dev { > >>>>> bool streaming; > >>>>> }; > >>>>> +struct mali_c55_stats_buf { > >>>>> + struct vb2_v4l2_buffer vb; > >>>>> + spinlock_t lock; > >>>> All locks require a comment to document what they protect. Same below. > >>>> > >>>>> + unsigned int segments_remaining; > >>>>> + struct list_head queue; > >>>>> + bool failed; > >>>>> +}; > >>>>> + > >>>>> +struct mali_c55_stats { > >>>>> + struct mali_c55 *mali_c55; > >>>>> + struct video_device vdev; > >>>>> + struct dma_chan *channel; > >>>>> + struct vb2_queue queue; > >>>>> + struct media_pad pad; > >>>>> + struct mutex lock; > >>>>> + > >>>>> + struct { > >>>>> + spinlock_t lock; > >>>>> + struct list_head queue; > >>>>> + } buffers; > >>>>> +}; > >>>>> + > >>>>> enum mali_c55_config_spaces { > >>>>> MALI_C55_CONFIG_PING, > >>>>> MALI_C55_CONFIG_PONG, > >>>>> @@ -224,6 +247,7 @@ struct mali_c55 { > >>>>> struct mali_c55_isp isp; > >>>>> struct mali_c55_resizer resizers[MALI_C55_NUM_RZRS]; > >>>>> struct mali_c55_cap_dev cap_devs[MALI_C55_NUM_CAP_DEVS]; > >>>>> + struct mali_c55_stats stats; > >>>>> struct list_head contexts; > >>>>> enum mali_c55_config_spaces next_config; > >>>>> @@ -245,6 +269,8 @@ int mali_c55_register_resizers(struct mali_c55 *mali_c55); > >>>>> void mali_c55_unregister_resizers(struct mali_c55 *mali_c55); > >>>>> int mali_c55_register_capture_devs(struct mali_c55 *mali_c55); > >>>>> void mali_c55_unregister_capture_devs(struct mali_c55 *mali_c55); > >>>>> +int mali_c55_register_stats(struct mali_c55 *mali_c55); > >>>>> +void mali_c55_unregister_stats(struct mali_c55 *mali_c55); > >>>>> struct mali_c55_ctx *mali_c55_get_active_context(struct mali_c55 *mali_c55); > >>>>> void mali_c55_set_plane_done(struct mali_c55_cap_dev *cap_dev, > >>>>> enum mali_c55_planes plane); > >>>>> @@ -262,5 +288,7 @@ mali_c55_isp_fmt_next(const struct mali_c55_isp_fmt *fmt); > >>>>> bool mali_c55_isp_is_format_supported(unsigned int mbus_code); > >>>>> #define for_each_mali_isp_fmt(fmt)\ > >>>>> for ((fmt) = NULL; ((fmt) = mali_c55_isp_fmt_next((fmt)));) > >>>>> +void mali_c55_stats_fill_buffer(struct mali_c55 *mali_c55, > >>>>> + enum mali_c55_config_spaces cfg_space); > >>>>> #endif /* _MALI_C55_COMMON_H */ > >>>>> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c > >>>>> b/drivers/media/platform/arm/mali-c55/mali-c55-core.c > >>>>> index 50caf5ee7474..9ea70010876c 100644 > >>>>> --- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c > >>>>> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c > >>>>> @@ -337,6 +337,16 @@ static int mali_c55_create_links(struct mali_c55 *mali_c55) > >>>>> } > >>>>> } > >>>>> + ret = media_create_pad_link(&mali_c55->isp.sd.entity, > >>>>> + MALI_C55_ISP_PAD_SOURCE_3A, > >>>>> + &mali_c55->stats.vdev.entity, 0, > >>>>> + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); > >>>>> + if (ret) { > >>>>> + dev_err(mali_c55->dev, > >>>>> + "failed to link ISP and 3a stats node\n"); > >>>> s/3a stats/stats/ > >>>> > >>>>> + goto err_remove_links; > >>>>> + } > >>>>> + > >>>>> return 0; > >>>>> err_remove_links: > >>>>> @@ -350,6 +360,7 @@ static void mali_c55_unregister_entities(struct mali_c55 *mali_c55) > >>>>> mali_c55_unregister_isp(mali_c55); > >>>>> mali_c55_unregister_resizers(mali_c55); > >>>>> mali_c55_unregister_capture_devs(mali_c55); > >>>>> + mali_c55_unregister_stats(mali_c55); > >>>>> } > >>>>> static int mali_c55_register_entities(struct mali_c55 *mali_c55) > >>>>> @@ -372,6 +383,10 @@ static int mali_c55_register_entities(struct mali_c55 *mali_c55) > >>>>> if (ret) > >>>>> goto err_unregister_entities; > >>>>> + ret = mali_c55_register_stats(mali_c55); > >>>>> + if (ret) > >>>>> + goto err_unregister_entities; > >>>>> + > >>>>> ret = mali_c55_create_links(mali_c55); > >>>>> if (ret) > >>>>> goto err_unregister_entities; > >>>>> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-isp.c > >>>>> b/drivers/media/platform/arm/mali-c55/mali-c55-isp.c > >>>>> index ea8b7b866e7a..94876fba3353 100644 > >>>>> --- a/drivers/media/platform/arm/mali-c55/mali-c55-isp.c > >>>>> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-isp.c > >>>>> @@ -564,6 +564,7 @@ int mali_c55_register_isp(struct mali_c55 *mali_c55) > >>>>> isp->pads[MALI_C55_ISP_PAD_SINK_VIDEO].flags = MEDIA_PAD_FL_SINK; > >>>>> isp->pads[MALI_C55_ISP_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; > >>>>> isp->pads[MALI_C55_ISP_PAD_SOURCE_BYPASS].flags = MEDIA_PAD_FL_SOURCE; > >>>>> + isp->pads[MALI_C55_ISP_PAD_SOURCE_3A].flags = MEDIA_PAD_FL_SOURCE; > >>>>> ret = media_entity_pads_init(&sd->entity, MALI_C55_ISP_NUM_PADS, > >>>>> isp->pads); > >>>>> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h > >>>>> b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h > >>>>> index cb27abde2aa5..eb3719245ec3 100644 > >>>>> --- a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h > >>>>> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h > >>>>> @@ -68,6 +68,9 @@ > >>>>> #define MALI_C55_VC_START(v) ((v) & 0xffff) > >>>>> #define MALI_C55_VC_SIZE(v) (((v) & 0xffff) << 16) > >>>>> +#define MALI_C55_REG_1024BIN_HIST 0x054a8 > >>>>> +#define MALI_C55_1024BIN_HIST_SIZE 4096 > >>>>> + > >>>>> /* Ping/Pong Configuration Space */ > >>>>> #define MALI_C55_REG_BASE_ADDR 0x18e88 > >>>>> #define MALI_C55_REG_BYPASS_0 0x18eac > >>>>> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-stats.c > >>>>> b/drivers/media/platform/arm/mali-c55/mali-c55-stats.c > >>>>> new file mode 100644 > >>>>> index 000000000000..aa40480ed814 > >>>>> --- /dev/null > >>>>> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-stats.c > >>>>> @@ -0,0 +1,350 @@ > >>>>> +// SPDX-License-Identifier: GPL-2.0 > >>>>> +/* > >>>>> + * ARM Mali-C55 ISP Driver - 3A Statistics capture device > >>>>> + * > >>>>> + * Copyright (C) 2023 Ideas on Board Oy > >>>>> + */ > >>>>> + > >>>>> +#include <linux/dmaengine.h> > >>>>> +#include <linux/media/arm/mali-c55-config.h> > >>>>> +#include <linux/spinlock.h> > >>>> You're missing some headers here, for > >>>> > >>>> container_of() > >>>> dev_err() > >>>> list_*() > >>>> mutex_init() > >>>> strscpy() > >>>> strscpy() > >>>> > >>>>> + > >>>>> +#include <media/media-entity.h> > >>>>> +#include <media/v4l2-dev.h> > >>>>> +#include <media/v4l2-event.h> > >>>>> +#include <media/v4l2-fh.h> > >>>>> +#include <media/v4l2-ioctl.h> > >>>>> +#include <media/videobuf2-core.h> > >>>>> +#include <media/videobuf2-dma-contig.h> > >>>>> + > >>>>> +#include "mali-c55-common.h" > >>>>> +#include "mali-c55-registers.h" > >>>>> + > >>>>> +static unsigned int metering_space_addrs[] = { > >>>> const > >>>> > >>>>> + [MALI_C55_CONFIG_PING] = 0x095AC, > >>>>> + [MALI_C55_CONFIG_PONG] = 0x2156C, > >>>> Lower-case hex constants. > >>>> > >>>>> +}; > >>>>> + > >>>>> +static int mali_c55_stats_enum_fmt_meta_cap(struct file *file, void *fh, > >>>>> + struct v4l2_fmtdesc *f) > >>>>> +{ > >>>>> + if (f->index || f->type != V4L2_BUF_TYPE_META_CAPTURE) > >>>>> + return -EINVAL; > >>>>> + > >>>>> + f->pixelformat = V4L2_META_FMT_MALI_C55_3A_STATS; > >>>> The format could be called V4L2_META_FMT_MALI_C55_STATS. While most > >>>> statistics are related to one of the 3A algorithms, I think it would be > >>>> better to name this generically. It's name bikeshedding only of course. > >>>> > >>>>> + > >>>>> + return 0; > >>>>> +} > >>>>> + > >>>>> +static int mali_c55_stats_g_fmt_meta_cap(struct file *file, void *fh, > >>>>> + struct v4l2_format *f) > >>>>> +{ > >>>>> + static const struct v4l2_meta_format mfmt = { > >>>>> + .dataformat = V4L2_META_FMT_MALI_C55_3A_STATS, > >>>>> + .buffersize = sizeof(struct mali_c55_stats_buffer) > >>>>> + }; > >>>>> + > >>>>> + if (f->type != V4L2_BUF_TYPE_META_CAPTURE) > >>>>> + return -EINVAL; > >>>>> + > >>>>> + f->fmt.meta = mfmt; > >>>>> + > >>>>> + return 0; > >>>>> +} > >>>>> + > >>>>> +static int mali_c55_stats_querycap(struct file *file, > >>>>> + void *priv, struct v4l2_capability *cap) > >>>>> +{ > >>>>> + strscpy(cap->driver, MALI_C55_DRIVER_NAME, sizeof(cap->driver)); > >>>>> + strscpy(cap->card, "ARM Mali-C55 ISP", sizeof(cap->card)); > >>>>> + > >>>>> + return 0; > >>>>> +} > >>>>> + > >>>>> +static const struct v4l2_ioctl_ops mali_c55_stats_v4l2_ioctl_ops = { > >>>>> + .vidioc_reqbufs = vb2_ioctl_reqbufs, > >>>>> + .vidioc_querybuf = vb2_ioctl_querybuf, > >>>>> + .vidioc_create_bufs = vb2_ioctl_create_bufs, > >>>>> + .vidioc_qbuf = vb2_ioctl_qbuf, > >>>>> + .vidioc_expbuf = vb2_ioctl_expbuf, > >>>>> + .vidioc_dqbuf = vb2_ioctl_dqbuf, > >>>>> + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, > >>>>> + .vidioc_streamon = vb2_ioctl_streamon, > >>>>> + .vidioc_streamoff = vb2_ioctl_streamoff, > >>>>> + .vidioc_enum_fmt_meta_cap = mali_c55_stats_enum_fmt_meta_cap, > >>>>> + .vidioc_g_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, > >>>>> + .vidioc_s_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, > >>>>> + .vidioc_try_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, > >>>>> + .vidioc_querycap = mali_c55_stats_querycap, > >>>>> + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, > >>>>> + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, > >>>>> +}; > >>>>> + > >>>>> +static const struct v4l2_file_operations mali_c55_stats_v4l2_fops = { > >>>>> + .owner = THIS_MODULE, > >>>>> + .unlocked_ioctl = video_ioctl2, > >>>>> + .open = v4l2_fh_open, > >>>>> + .release = vb2_fop_release, > >>>>> + .poll = vb2_fop_poll, > >>>>> + .mmap = vb2_fop_mmap, > >>>>> +}; > >>>>> + > >>>>> +static int > >>>>> +mali_c55_stats_queue_setup(struct vb2_queue *q, unsigned int *num_buffers, > >>>>> + unsigned int *num_planes, unsigned int sizes[], > >>>>> + struct device *alloc_devs[]) > >>>>> +{ > >>>>> + struct mali_c55_stats *stats = vb2_get_drv_priv(q); > >>>>> + > >>>>> + if (*num_planes && *num_planes > 1) > >>>>> + return -EINVAL; > >>>>> + > >>>>> + if (sizes[0] && sizes[0] != sizeof(struct mali_c55_stats_buffer)) > >>>>> + return -EINVAL; > >>>>> + > >>>>> + *num_planes = 1; > >>>>> + sizes[0] = sizeof(struct mali_c55_stats_buffer); > >>>>> + > >>>>> + if (stats->channel) > >>>>> + alloc_devs[0] = stats->channel->device->dev; > >>>>> + > >>>>> + return 0; > >>>>> +} > >>>>> + > >>>>> +static void mali_c55_stats_buf_queue(struct vb2_buffer *vb) > >>>>> +{ > >>>>> + struct mali_c55_stats *stats = vb2_get_drv_priv(vb->vb2_queue); > >>>>> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); > >>>>> + struct mali_c55_stats_buf *buf = container_of(vbuf, > >>>>> + struct mali_c55_stats_buf, vb); > >>>>> + > >>>>> + vb2_set_plane_payload(vb, 0, sizeof(struct mali_c55_stats_buffer)); > >>>>> + buf->segments_remaining = 2; > >>>>> + buf->failed = false; > >>>>> + > >>>>> + spin_lock(&stats->buffers.lock); > >>>> > >>>> Isn't the DMA completion handler run from IRQ context ? If so you'll > >>>> need to use spin_lock_irq() here and in the other function that are > >>>> not called with interrupts disabled. > >>> > >>> They're run in the bottom half of the interrupt handler; I'm under the > >>> impression that that means the interrupts aren't disabled, and it's > >>> safe to do...is that mistaken? > >> > >> I'm talking about the DMA completion handler, called by the DMA engine > >> subsystem, not the IRQs of the C55 itself. > > > > Ah! I follow you now sorry. Hm, that's an interesting thought...I think for the PL330 the answer > > is no; the interrupt handler wakes a thread that runs the callbacks for any DMA transfers that are > > completed...I don't know that that's a design rule we can rely on though so possibly it's better > > to be safe. Is there a disadvantage to using spin_lock_irq() outside of IRQ context? spin_lock_irq() isn't meant for IRQ contexts. spin_lock_irq() means "disable IRQs on this CPU and acquire the spinlock". spin_unlock_irq() means "release the spinlock and enable IRQs on this CPU". IRQs are not reentrant in Linux (RT support changes this a bit, but API-wise the following explanation still holds), the kernel disables interrupts on the local CPU before running an interrupt handler. This means that, if the CPU has acquired a spinlock, and an interrupt occurs on the same CPU, with the interrupt handler trying to acquire the same spinlock, the kernel will deadlock as control will never be returned to the context that holds the lock. For this reason, when a spinlock can be acquired from an interrupt handler, the *other* (non-IRQ) contexts need to call spin_lock_irq() to disable interrupts on the local CPU before acquiring the lock. spin_unlock_irq() will release the lock and reenable interrupts, allowing the interrupt handler to proceed. While spin_lock_irq() can technically be called from both IRQ and non-IRQ context (as disabling interrupts if they're already disabled is a no-op), calling spin_unlock_irq() from interrupt context means that IRQs will be reenabled while the IRQ handler is still running. That will lead to disaster sooner or later, so it's important that the interrupt handler uses spin_lock() and spin_unlock(). In cases where the same code can be called from both IRQ context and non-IRQ context, you should use spin_lock_irqsave() and spin_unlock_irqrestore(). The former will save the IRQ state and disable IRQs, while the latter will restore the IRQ state. Using spin_lock_irqsave() and spin_lock_irqrestore() unconditionally is the safest option as you don't have to think about contexts. The downside is a small overhead due to the IRQ state save/restore. The summary is that you can use the _irq{save,restore} variants everywhere, but if you want to optimize the code, you need to - Use spin_lock() and spin_unlock() in contexts where interrupts are disabled (IRQ handlers, or code sections that are covered by another spinlock already) - Use spin_lock() and spin_unlock() in contexts where interrupts are enabled *if* the same lock can never be acquired *on the same CPU* from an IRQ-disabled context - Use spin_lock_irq() and spin_unlock_irq() in contexts where interrupts are enabled *if* the same lock can be acquired *on the same CPU* from an IRQ-disabled context - Use spin_lock_irqsave() and spin_unlock_irqrestore() in contexts where you can't guarantee the IRQ state (such as helper functions that can be called from different contexts) > Actually I think from [1] that the answer is they're not run from interrupt context, the page says > "Note that callbacks will always be invoked from the DMA engine's tasklet, never from interrupt > context". I'll leave as an exercise for the reader to determine if that context is interruptible or not :-) You'll also need to check if the caller is allowed to hold a spinlock while calling the callback. > [1] Documentation/driver-api/dmaengine/client.rst > > >>>>> + list_add_tail(&buf->queue, &stats->buffers.queue); > >>>>> + spin_unlock(&stats->buffers.lock); > >>>>> +} > >>>>> + > >>>>> +static void mali_c55_stats_stop_streaming(struct vb2_queue *q) > >>>>> +{ > >>>>> + struct mali_c55_stats *stats = vb2_get_drv_priv(q); > >>>>> + struct mali_c55_stats_buf *buf, *tmp; > >>>>> + > >>>>> + spin_lock(&stats->buffers.lock); > >>>>> + > >>>>> + list_for_each_entry_safe(buf, tmp, &stats->buffers.queue, queue) { > >>>>> + list_del(&buf->queue); > >>>>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); > >>>>> + } > >>>>> + > >>>>> + spin_unlock(&stats->buffers.lock); > >>>>> +} > >>>>> + > >>>>> +static const struct vb2_ops mali_c55_stats_vb2_ops = { > >>>>> + .queue_setup = mali_c55_stats_queue_setup, > >>>>> + .buf_queue = mali_c55_stats_buf_queue, > >>>>> + .wait_prepare = vb2_ops_wait_prepare, > >>>>> + .wait_finish = vb2_ops_wait_finish, > >>>>> + .stop_streaming = mali_c55_stats_stop_streaming, > >>>>> +}; > >>>>> + > >>>>> +static void > >>>>> +mali_c55_stats_metering_complete(void *param, > >>>>> + const struct dmaengine_result *result) > >>>>> +{ > >>>>> + struct mali_c55_stats_buf *buf = param; > >>>>> + > >>>>> + spin_lock(&buf->lock); > >>>> I wonder if this is needed. Can the DMA engine call the completion > >>>> handlers of two sequential DMA transfers in parallel ? > >>> The DMA engine that's on the system we have can't...I wasn't sure > >>> whether that was generically true. > >> I think it is, but please double-check. > >> > >>>>> + > >>>>> + if (buf->failed) > >>>>> + goto out_unlock; > >>>>> + > >>>>> + buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns(); > >>>>> + > >>>>> + if (result->result != DMA_TRANS_NOERROR) { > >>>>> + buf->failed = true; > >>>>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); > >>>> This will possibly return the buffer to userspace after the first DMA > >>>> transfer. Userspace could then requeue the buffer to the kernel before > >>>> the completion of the second DMA transfer. That will cause trouble. I > >>>> think you should instead do something like > >>>> > >>>> spin_lock(&buf->lock); > >>>> > >>>> if (result->result != DMA_TRANS_NOERROR) > >>>> buf->failed = true; > >>>> > >>>> if (!--buf->segments_remaining) { > >>>> buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns(); > >>>> vb2_buffer_done(&buf->vb.vb2_buf, buf->failed ? > >>>> VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE); > >>>> } > >>>> > >>>> spin_unlock(&buf->lock); > >>>> > >>>> The > >>>> > >>>> buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns(); > >>>> > >>>> line could also be moved to mali_c55_stats_fill_buffer(), which would > >>>> make sure the timestamp is filled in case of DMA submission failures. > >>> Okedokey > >>> > >>>>> + goto out_unlock; > >>>>> + } > >>>>> + > >>>>> + if (!--buf->segments_remaining) > >>>>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); > >>>>> + > >>>>> +out_unlock: > >>>>> + spin_unlock(&buf->lock); > >>>>> +} > >>>>> + > >>>>> +static int mali_c55_stats_dma_xfer(struct mali_c55_stats *stats, dma_addr_t src, > >>>>> + dma_addr_t dst, > >>>>> + struct mali_c55_stats_buf *buf, > >>>>> + size_t length, > >>>>> + void (*callback)(void *, const struct dmaengine_result *result)) > >>>> The same callback is used for both invocations of this function, you can > >>>> drop the parameter and hardcode it below. > >>> Yeah, not even sure now why I had a parameter. > >>> > >>>>> +{ > >>>>> + struct dma_async_tx_descriptor *tx; > >>>>> + dma_cookie_t cookie; > >>>>> + > >>>>> + tx = dmaengine_prep_dma_memcpy(stats->channel, dst, src, length, 0); > >>>>> + if (!tx) { > >>>>> + dev_err(stats->mali_c55->dev, "failed to prep stats DMA\n"); > >>>>> + return -EIO; > >>>>> + } > >>>>> + > >>>>> + tx->callback_result = callback; > >>>>> + tx->callback_param = buf; > >>>>> + > >>>>> + cookie = dmaengine_submit(tx); > >>>>> + if (dma_submit_error(cookie)) { > >>>>> + dev_err(stats->mali_c55->dev, "failed to submit stats DMA\n"); > >>>>> + return -EIO; > >>>>> + } > >>>>> + > >>>>> + dma_async_issue_pending(stats->channel); > >>>>> + return 0; > >>>>> +} > >>>>> + > >>>>> +void mali_c55_stats_fill_buffer(struct mali_c55 *mali_c55, > >>>>> + enum mali_c55_config_spaces cfg_space) > >>>>> +{ > >>>>> + struct mali_c55_ctx *ctx = mali_c55_get_active_context(mali_c55); > >>>>> + struct mali_c55_stats *stats = &mali_c55->stats; > >>>>> + struct mali_c55_stats_buf *buf = NULL; > >>>>> + dma_addr_t src, dst; > >>>>> + int ret; > >>>>> + > >>>>> + spin_lock(&stats->buffers.lock); > >>>>> + if (!list_empty(&stats->buffers.queue)) { > >>>>> + buf = list_first_entry(&stats->buffers.queue, > >>>>> + struct mali_c55_stats_buf, queue); > >>>>> + list_del(&buf->queue); > >>>>> + } > >>>>> + spin_unlock(&stats->buffers.lock); > >>>>> + > >>>>> + if (!buf) > >>>>> + return; > >>>>> + > >>>>> + buf->vb.sequence = mali_c55->isp.frame_sequence; > >>>>> + > >>>>> + /* > >>>>> + * There are infact two noncontiguous sections of the ISP's > >>>> s/infact/in fact/ > >>>> > >>>>> + * memory space that hold statistics for 3a algorithms to use. A > >>>> s/use. A/use: a/ > >>>> > >>>>> + * section in each config space and a global section holding > >>>>> + * histograms which is double buffered and so holds data for the > >>>>> + * last frame. We need to read both. > >>>>> + */ > >>>>> + src = ctx->base + MALI_C55_REG_1024BIN_HIST; > >>>>> + dst = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); > >>>>> + > >>>>> + ret = mali_c55_stats_dma_xfer(stats, src, dst, buf, > >>>>> + MALI_C55_1024BIN_HIST_SIZE, > >>>>> + mali_c55_stats_metering_complete); > >>>>> + if (ret) > >>>>> + goto err_fail_buffer; > >>>>> + > >>>>> + src = ctx->base + metering_space_addrs[cfg_space]; > >>>>> + dst += MALI_C55_1024BIN_HIST_SIZE; > >>>>> + > >>>>> + ret = mali_c55_stats_dma_xfer( > >>>>> + stats, src, dst, buf, > >>>>> + sizeof(struct mali_c55_stats_buffer) - MALI_C55_1024BIN_HIST_SIZE, > >>>>> + mali_c55_stats_metering_complete); > >>>>> + if (ret) { > >>>>> + dmaengine_terminate_sync(stats->channel); > >>>>> + goto err_fail_buffer; > >>>>> + } > >>>> I think you will need to terminate DMA transfers at stream off time. > >>>> > >>>>> + > >>>>> + return; > >>>>> + > >>>>> +err_fail_buffer: > >>>>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); > >>>>> +} > >>>>> + > >>>>> +void mali_c55_unregister_stats(struct mali_c55 *mali_c55) > >>>>> +{ > >>>>> + struct mali_c55_stats *stats = &mali_c55->stats; > >>>>> + > >>>>> + if (!video_is_registered(&stats->vdev)) > >>>>> + return; > >>>>> + > >>>>> + vb2_video_unregister_device(&stats->vdev); > >>>>> + media_entity_cleanup(&stats->vdev.entity); > >>>>> + dma_release_channel(stats->channel); > >>>>> + mutex_destroy(&stats->lock); > >>>>> +} > >>>>> + > >>>>> +int mali_c55_register_stats(struct mali_c55 *mali_c55) > >>>>> +{ > >>>>> + struct mali_c55_stats *stats = &mali_c55->stats; > >>>>> + struct video_device *vdev = &stats->vdev; > >>>>> + struct vb2_queue *vb2q = &stats->queue; > >>>>> + dma_cap_mask_t mask; > >>>>> + int ret; > >>>>> + > >>>>> + mutex_init(&stats->lock); > >>>>> + INIT_LIST_HEAD(&stats->buffers.queue); > >>>>> + > >>>>> + dma_cap_zero(mask); > >>>>> + dma_cap_set(DMA_MEMCPY, mask); > >>>>> + > >>>>> + stats->channel = dma_request_channel(mask, 0, NULL); > >>>> Do we need a CPU fallback in case no DMA is available ? > >>> Yes, actually. > >>> > >>>> I'm still very curious to know how long it takes to perform the DMA > >>>> transfer, compared to copying the data with the CPU, and especially > >>>> compared to the frame duration. > >>> On my list of things to test and report :) > >> Looking forward to it :-) > >> > >>>>> + if (!stats->channel) { > >>>>> + ret = -ENODEV; > >>>>> + goto err_destroy_mutex; > >>>>> + } > >>>>> + > >>>>> + stats->pad.flags = MEDIA_PAD_FL_SINK; > >>>>> + ret = media_entity_pads_init(&stats->vdev.entity, 1, &stats->pad); > >>>>> + if (ret) > >>>>> + goto err_release_dma_channel; > >>>>> + > >>>>> + vb2q->type = V4L2_BUF_TYPE_META_CAPTURE; > >>>>> + vb2q->io_modes = VB2_MMAP | VB2_DMABUF; > >>>>> + vb2q->drv_priv = stats; > >>>>> + vb2q->mem_ops = &vb2_dma_contig_memops; > >>>>> + vb2q->ops = &mali_c55_stats_vb2_ops; > >>>>> + vb2q->buf_struct_size = sizeof(struct mali_c55_stats_buf); > >>>>> + vb2q->min_queued_buffers = 1; > >>>>> + vb2q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; > >>>>> + vb2q->lock = &stats->lock; > >>>>> + vb2q->dev = mali_c55->dev; > >>>> That's not the right device. The device that performs the DMA operation > >>>> is the DMA engine, and that's what you need to pass to vb2. Otherwise > >>>> the DMA address returned by vb2_dma_contig_plane_dma_addr() will be > >>>> mapped to the ISP device, not the DMA engine. In practice, if neither > >>>> are behind an IOMMU, things will likely work, but when that's not the > >>>> case, run into problems. > >>>> > >>>>> + > >>>>> + ret = vb2_queue_init(vb2q); > >>>>> + if (ret) { > >>>>> + dev_err(mali_c55->dev, "stats vb2 queue init failed\n"); > >>>>> + goto err_cleanup_entity; > >>>>> + } > >>>>> + > >>>>> + strscpy(stats->vdev.name, "mali-c55 3a stats", sizeof(stats->vdev.name)); > >>>> s/3a // > >>>> > >>>>> + vdev->release = video_device_release_empty; > >>>> That's never right. You should refcount the data structures to ensure > >>>> proper lifetime management. > >>>> > >>>>> + vdev->fops = &mali_c55_stats_v4l2_fops; > >>>>> + vdev->ioctl_ops = &mali_c55_stats_v4l2_ioctl_ops; > >>>>> + vdev->lock = &stats->lock; > >>>>> + vdev->v4l2_dev = &mali_c55->v4l2_dev; > >>>>> + vdev->queue = &stats->queue; > >>>>> + vdev->device_caps = V4L2_CAP_META_CAPTURE | V4L2_CAP_STREAMING; > >>>>> + vdev->vfl_dir = VFL_DIR_RX; > >>>>> + video_set_drvdata(vdev, stats); > >>>>> + > >>>>> + ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1); > >>>>> + if (ret) { > >>>>> + dev_err(mali_c55->dev, > >>>>> + "failed to register stats video device\n"); > >>>>> + goto err_release_vb2q; > >>>>> + } > >>>>> + > >>>>> + stats->mali_c55 = mali_c55; > >>>>> + > >>>>> + return 0; > >>>>> + > >>>>> +err_release_vb2q: > >>>>> + vb2_queue_release(vb2q); > >>>>> +err_cleanup_entity: > >>>>> + media_entity_cleanup(&stats->vdev.entity); > >>>>> +err_release_dma_channel: > >>>>> + dma_release_channel(stats->channel); > >>>>> +err_destroy_mutex: > >>>>> + mutex_destroy(&stats->lock); > >>>>> + > >>>>> + return ret; > >>>>> +}
diff --git a/drivers/media/platform/arm/mali-c55/Makefile b/drivers/media/platform/arm/mali-c55/Makefile index 77dcb2fbf0f4..cd5a64bf0c62 100644 --- a/drivers/media/platform/arm/mali-c55/Makefile +++ b/drivers/media/platform/arm/mali-c55/Makefile @@ -4,6 +4,7 @@ mali-c55-y := mali-c55-capture.o \ mali-c55-core.o \ mali-c55-isp.o \ mali-c55-tpg.o \ - mali-c55-resizer.o + mali-c55-resizer.o \ + mali-c55-stats.o obj-$(CONFIG_VIDEO_MALI_C55) += mali-c55.o diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-common.h b/drivers/media/platform/arm/mali-c55/mali-c55-common.h index 2d0c4d152beb..44119e04009b 100644 --- a/drivers/media/platform/arm/mali-c55/mali-c55-common.h +++ b/drivers/media/platform/arm/mali-c55/mali-c55-common.h @@ -79,6 +79,7 @@ enum mali_c55_isp_pads { MALI_C55_ISP_PAD_SINK_VIDEO, MALI_C55_ISP_PAD_SOURCE, MALI_C55_ISP_PAD_SOURCE_BYPASS, + MALI_C55_ISP_PAD_SOURCE_3A, MALI_C55_ISP_NUM_PADS, }; @@ -194,6 +195,28 @@ struct mali_c55_cap_dev { bool streaming; }; +struct mali_c55_stats_buf { + struct vb2_v4l2_buffer vb; + spinlock_t lock; + unsigned int segments_remaining; + struct list_head queue; + bool failed; +}; + +struct mali_c55_stats { + struct mali_c55 *mali_c55; + struct video_device vdev; + struct dma_chan *channel; + struct vb2_queue queue; + struct media_pad pad; + struct mutex lock; + + struct { + spinlock_t lock; + struct list_head queue; + } buffers; +}; + enum mali_c55_config_spaces { MALI_C55_CONFIG_PING, MALI_C55_CONFIG_PONG, @@ -224,6 +247,7 @@ struct mali_c55 { struct mali_c55_isp isp; struct mali_c55_resizer resizers[MALI_C55_NUM_RZRS]; struct mali_c55_cap_dev cap_devs[MALI_C55_NUM_CAP_DEVS]; + struct mali_c55_stats stats; struct list_head contexts; enum mali_c55_config_spaces next_config; @@ -245,6 +269,8 @@ int mali_c55_register_resizers(struct mali_c55 *mali_c55); void mali_c55_unregister_resizers(struct mali_c55 *mali_c55); int mali_c55_register_capture_devs(struct mali_c55 *mali_c55); void mali_c55_unregister_capture_devs(struct mali_c55 *mali_c55); +int mali_c55_register_stats(struct mali_c55 *mali_c55); +void mali_c55_unregister_stats(struct mali_c55 *mali_c55); struct mali_c55_ctx *mali_c55_get_active_context(struct mali_c55 *mali_c55); void mali_c55_set_plane_done(struct mali_c55_cap_dev *cap_dev, enum mali_c55_planes plane); @@ -262,5 +288,7 @@ mali_c55_isp_fmt_next(const struct mali_c55_isp_fmt *fmt); bool mali_c55_isp_is_format_supported(unsigned int mbus_code); #define for_each_mali_isp_fmt(fmt)\ for ((fmt) = NULL; ((fmt) = mali_c55_isp_fmt_next((fmt)));) +void mali_c55_stats_fill_buffer(struct mali_c55 *mali_c55, + enum mali_c55_config_spaces cfg_space); #endif /* _MALI_C55_COMMON_H */ diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c index 50caf5ee7474..9ea70010876c 100644 --- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c +++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c @@ -337,6 +337,16 @@ static int mali_c55_create_links(struct mali_c55 *mali_c55) } } + ret = media_create_pad_link(&mali_c55->isp.sd.entity, + MALI_C55_ISP_PAD_SOURCE_3A, + &mali_c55->stats.vdev.entity, 0, + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); + if (ret) { + dev_err(mali_c55->dev, + "failed to link ISP and 3a stats node\n"); + goto err_remove_links; + } + return 0; err_remove_links: @@ -350,6 +360,7 @@ static void mali_c55_unregister_entities(struct mali_c55 *mali_c55) mali_c55_unregister_isp(mali_c55); mali_c55_unregister_resizers(mali_c55); mali_c55_unregister_capture_devs(mali_c55); + mali_c55_unregister_stats(mali_c55); } static int mali_c55_register_entities(struct mali_c55 *mali_c55) @@ -372,6 +383,10 @@ static int mali_c55_register_entities(struct mali_c55 *mali_c55) if (ret) goto err_unregister_entities; + ret = mali_c55_register_stats(mali_c55); + if (ret) + goto err_unregister_entities; + ret = mali_c55_create_links(mali_c55); if (ret) goto err_unregister_entities; diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-isp.c b/drivers/media/platform/arm/mali-c55/mali-c55-isp.c index ea8b7b866e7a..94876fba3353 100644 --- a/drivers/media/platform/arm/mali-c55/mali-c55-isp.c +++ b/drivers/media/platform/arm/mali-c55/mali-c55-isp.c @@ -564,6 +564,7 @@ int mali_c55_register_isp(struct mali_c55 *mali_c55) isp->pads[MALI_C55_ISP_PAD_SINK_VIDEO].flags = MEDIA_PAD_FL_SINK; isp->pads[MALI_C55_ISP_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; isp->pads[MALI_C55_ISP_PAD_SOURCE_BYPASS].flags = MEDIA_PAD_FL_SOURCE; + isp->pads[MALI_C55_ISP_PAD_SOURCE_3A].flags = MEDIA_PAD_FL_SOURCE; ret = media_entity_pads_init(&sd->entity, MALI_C55_ISP_NUM_PADS, isp->pads); diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h index cb27abde2aa5..eb3719245ec3 100644 --- a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h +++ b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h @@ -68,6 +68,9 @@ #define MALI_C55_VC_START(v) ((v) & 0xffff) #define MALI_C55_VC_SIZE(v) (((v) & 0xffff) << 16) +#define MALI_C55_REG_1024BIN_HIST 0x054a8 +#define MALI_C55_1024BIN_HIST_SIZE 4096 + /* Ping/Pong Configuration Space */ #define MALI_C55_REG_BASE_ADDR 0x18e88 #define MALI_C55_REG_BYPASS_0 0x18eac diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-stats.c b/drivers/media/platform/arm/mali-c55/mali-c55-stats.c new file mode 100644 index 000000000000..aa40480ed814 --- /dev/null +++ b/drivers/media/platform/arm/mali-c55/mali-c55-stats.c @@ -0,0 +1,350 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ARM Mali-C55 ISP Driver - 3A Statistics capture device + * + * Copyright (C) 2023 Ideas on Board Oy + */ + +#include <linux/dmaengine.h> +#include <linux/media/arm/mali-c55-config.h> +#include <linux/spinlock.h> + +#include <media/media-entity.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-event.h> +#include <media/v4l2-fh.h> +#include <media/v4l2-ioctl.h> +#include <media/videobuf2-core.h> +#include <media/videobuf2-dma-contig.h> + +#include "mali-c55-common.h" +#include "mali-c55-registers.h" + +static unsigned int metering_space_addrs[] = { + [MALI_C55_CONFIG_PING] = 0x095AC, + [MALI_C55_CONFIG_PONG] = 0x2156C, +}; + +static int mali_c55_stats_enum_fmt_meta_cap(struct file *file, void *fh, + struct v4l2_fmtdesc *f) +{ + if (f->index || f->type != V4L2_BUF_TYPE_META_CAPTURE) + return -EINVAL; + + f->pixelformat = V4L2_META_FMT_MALI_C55_3A_STATS; + + return 0; +} + +static int mali_c55_stats_g_fmt_meta_cap(struct file *file, void *fh, + struct v4l2_format *f) +{ + static const struct v4l2_meta_format mfmt = { + .dataformat = V4L2_META_FMT_MALI_C55_3A_STATS, + .buffersize = sizeof(struct mali_c55_stats_buffer) + }; + + if (f->type != V4L2_BUF_TYPE_META_CAPTURE) + return -EINVAL; + + f->fmt.meta = mfmt; + + return 0; +} + +static int mali_c55_stats_querycap(struct file *file, + void *priv, struct v4l2_capability *cap) +{ + strscpy(cap->driver, MALI_C55_DRIVER_NAME, sizeof(cap->driver)); + strscpy(cap->card, "ARM Mali-C55 ISP", sizeof(cap->card)); + + return 0; +} + +static const struct v4l2_ioctl_ops mali_c55_stats_v4l2_ioctl_ops = { + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_expbuf = vb2_ioctl_expbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + .vidioc_enum_fmt_meta_cap = mali_c55_stats_enum_fmt_meta_cap, + .vidioc_g_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, + .vidioc_s_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, + .vidioc_try_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap, + .vidioc_querycap = mali_c55_stats_querycap, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static const struct v4l2_file_operations mali_c55_stats_v4l2_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = video_ioctl2, + .open = v4l2_fh_open, + .release = vb2_fop_release, + .poll = vb2_fop_poll, + .mmap = vb2_fop_mmap, +}; + +static int +mali_c55_stats_queue_setup(struct vb2_queue *q, unsigned int *num_buffers, + unsigned int *num_planes, unsigned int sizes[], + struct device *alloc_devs[]) +{ + struct mali_c55_stats *stats = vb2_get_drv_priv(q); + + if (*num_planes && *num_planes > 1) + return -EINVAL; + + if (sizes[0] && sizes[0] != sizeof(struct mali_c55_stats_buffer)) + return -EINVAL; + + *num_planes = 1; + sizes[0] = sizeof(struct mali_c55_stats_buffer); + + if (stats->channel) + alloc_devs[0] = stats->channel->device->dev; + + return 0; +} + +static void mali_c55_stats_buf_queue(struct vb2_buffer *vb) +{ + struct mali_c55_stats *stats = vb2_get_drv_priv(vb->vb2_queue); + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct mali_c55_stats_buf *buf = container_of(vbuf, + struct mali_c55_stats_buf, vb); + + vb2_set_plane_payload(vb, 0, sizeof(struct mali_c55_stats_buffer)); + buf->segments_remaining = 2; + buf->failed = false; + + spin_lock(&stats->buffers.lock); + list_add_tail(&buf->queue, &stats->buffers.queue); + spin_unlock(&stats->buffers.lock); +} + +static void mali_c55_stats_stop_streaming(struct vb2_queue *q) +{ + struct mali_c55_stats *stats = vb2_get_drv_priv(q); + struct mali_c55_stats_buf *buf, *tmp; + + spin_lock(&stats->buffers.lock); + + list_for_each_entry_safe(buf, tmp, &stats->buffers.queue, queue) { + list_del(&buf->queue); + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); + } + + spin_unlock(&stats->buffers.lock); +} + +static const struct vb2_ops mali_c55_stats_vb2_ops = { + .queue_setup = mali_c55_stats_queue_setup, + .buf_queue = mali_c55_stats_buf_queue, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, + .stop_streaming = mali_c55_stats_stop_streaming, +}; + +static void +mali_c55_stats_metering_complete(void *param, + const struct dmaengine_result *result) +{ + struct mali_c55_stats_buf *buf = param; + + spin_lock(&buf->lock); + + if (buf->failed) + goto out_unlock; + + buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns(); + + if (result->result != DMA_TRANS_NOERROR) { + buf->failed = true; + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); + goto out_unlock; + } + + if (!--buf->segments_remaining) + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); + +out_unlock: + spin_unlock(&buf->lock); +} + +static int mali_c55_stats_dma_xfer(struct mali_c55_stats *stats, dma_addr_t src, + dma_addr_t dst, + struct mali_c55_stats_buf *buf, + size_t length, + void (*callback)(void *, const struct dmaengine_result *result)) +{ + struct dma_async_tx_descriptor *tx; + dma_cookie_t cookie; + + tx = dmaengine_prep_dma_memcpy(stats->channel, dst, src, length, 0); + if (!tx) { + dev_err(stats->mali_c55->dev, "failed to prep stats DMA\n"); + return -EIO; + } + + tx->callback_result = callback; + tx->callback_param = buf; + + cookie = dmaengine_submit(tx); + if (dma_submit_error(cookie)) { + dev_err(stats->mali_c55->dev, "failed to submit stats DMA\n"); + return -EIO; + } + + dma_async_issue_pending(stats->channel); + return 0; +} + +void mali_c55_stats_fill_buffer(struct mali_c55 *mali_c55, + enum mali_c55_config_spaces cfg_space) +{ + struct mali_c55_ctx *ctx = mali_c55_get_active_context(mali_c55); + struct mali_c55_stats *stats = &mali_c55->stats; + struct mali_c55_stats_buf *buf = NULL; + dma_addr_t src, dst; + int ret; + + spin_lock(&stats->buffers.lock); + if (!list_empty(&stats->buffers.queue)) { + buf = list_first_entry(&stats->buffers.queue, + struct mali_c55_stats_buf, queue); + list_del(&buf->queue); + } + spin_unlock(&stats->buffers.lock); + + if (!buf) + return; + + buf->vb.sequence = mali_c55->isp.frame_sequence; + + /* + * There are infact two noncontiguous sections of the ISP's + * memory space that hold statistics for 3a algorithms to use. A + * section in each config space and a global section holding + * histograms which is double buffered and so holds data for the + * last frame. We need to read both. + */ + src = ctx->base + MALI_C55_REG_1024BIN_HIST; + dst = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); + + ret = mali_c55_stats_dma_xfer(stats, src, dst, buf, + MALI_C55_1024BIN_HIST_SIZE, + mali_c55_stats_metering_complete); + if (ret) + goto err_fail_buffer; + + src = ctx->base + metering_space_addrs[cfg_space]; + dst += MALI_C55_1024BIN_HIST_SIZE; + + ret = mali_c55_stats_dma_xfer( + stats, src, dst, buf, + sizeof(struct mali_c55_stats_buffer) - MALI_C55_1024BIN_HIST_SIZE, + mali_c55_stats_metering_complete); + if (ret) { + dmaengine_terminate_sync(stats->channel); + goto err_fail_buffer; + } + + return; + +err_fail_buffer: + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); +} + +void mali_c55_unregister_stats(struct mali_c55 *mali_c55) +{ + struct mali_c55_stats *stats = &mali_c55->stats; + + if (!video_is_registered(&stats->vdev)) + return; + + vb2_video_unregister_device(&stats->vdev); + media_entity_cleanup(&stats->vdev.entity); + dma_release_channel(stats->channel); + mutex_destroy(&stats->lock); +} + +int mali_c55_register_stats(struct mali_c55 *mali_c55) +{ + struct mali_c55_stats *stats = &mali_c55->stats; + struct video_device *vdev = &stats->vdev; + struct vb2_queue *vb2q = &stats->queue; + dma_cap_mask_t mask; + int ret; + + mutex_init(&stats->lock); + INIT_LIST_HEAD(&stats->buffers.queue); + + dma_cap_zero(mask); + dma_cap_set(DMA_MEMCPY, mask); + + stats->channel = dma_request_channel(mask, 0, NULL); + if (!stats->channel) { + ret = -ENODEV; + goto err_destroy_mutex; + } + + stats->pad.flags = MEDIA_PAD_FL_SINK; + ret = media_entity_pads_init(&stats->vdev.entity, 1, &stats->pad); + if (ret) + goto err_release_dma_channel; + + vb2q->type = V4L2_BUF_TYPE_META_CAPTURE; + vb2q->io_modes = VB2_MMAP | VB2_DMABUF; + vb2q->drv_priv = stats; + vb2q->mem_ops = &vb2_dma_contig_memops; + vb2q->ops = &mali_c55_stats_vb2_ops; + vb2q->buf_struct_size = sizeof(struct mali_c55_stats_buf); + vb2q->min_queued_buffers = 1; + vb2q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + vb2q->lock = &stats->lock; + vb2q->dev = mali_c55->dev; + + ret = vb2_queue_init(vb2q); + if (ret) { + dev_err(mali_c55->dev, "stats vb2 queue init failed\n"); + goto err_cleanup_entity; + } + + strscpy(stats->vdev.name, "mali-c55 3a stats", sizeof(stats->vdev.name)); + vdev->release = video_device_release_empty; + vdev->fops = &mali_c55_stats_v4l2_fops; + vdev->ioctl_ops = &mali_c55_stats_v4l2_ioctl_ops; + vdev->lock = &stats->lock; + vdev->v4l2_dev = &mali_c55->v4l2_dev; + vdev->queue = &stats->queue; + vdev->device_caps = V4L2_CAP_META_CAPTURE | V4L2_CAP_STREAMING; + vdev->vfl_dir = VFL_DIR_RX; + video_set_drvdata(vdev, stats); + + ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1); + if (ret) { + dev_err(mali_c55->dev, + "failed to register stats video device\n"); + goto err_release_vb2q; + } + + stats->mali_c55 = mali_c55; + + return 0; + +err_release_vb2q: + vb2_queue_release(vb2q); +err_cleanup_entity: + media_entity_cleanup(&stats->vdev.entity); +err_release_dma_channel: + dma_release_channel(stats->channel); +err_destroy_mutex: + mutex_destroy(&stats->lock); + + return ret; +}