Message ID | 20240628-cleanup-ad7606-v2-10-96e02f90256d@baylibre.com (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
Series | iio: adc: ad7606: Improvements | expand |
On Fri, 28 Jun 2024 14:48:28 +0000 Guillaume Stols <gstols@baylibre.com> wrote: > Switching to scoped_guard simplifies the code and avoids to take care to > unlock the mutex in case of premature return. > > Signed-off-by: Guillaume Stols <gstols@baylibre.com> > --- > drivers/iio/adc/ad7606.c | 60 ++++++++++++++++++++++-------------------------- > 1 file changed, 27 insertions(+), 33 deletions(-) > > diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c > index 50ccc245e314..3c439787d130 100644 > --- a/drivers/iio/adc/ad7606.c > +++ b/drivers/iio/adc/ad7606.c > @@ -69,19 +69,17 @@ static int ad7606_reg_access(struct iio_dev *indio_dev, > struct ad7606_state *st = iio_priv(indio_dev); > int ret; > > - mutex_lock(&st->lock); > + guard(mutex)(&st->lock); > + > if (readval) { > ret = st->bops->reg_read(st, reg); > if (ret < 0) > - goto err_unlock; > + return ret; > *readval = ret; > - ret = 0; > + return 0; > } else { > - ret = st->bops->reg_write(st, reg, writeval); > + return st->bops->reg_write(st, reg, writeval); > } > -err_unlock: > - mutex_unlock(&st->lock); > - return ret; > } > > static int ad7606_read_samples(struct ad7606_state *st) > @@ -124,18 +122,18 @@ static irqreturn_t ad7606_trigger_handler(int irq, void *p) > struct ad7606_state *st = iio_priv(indio_dev); > int ret; > > - mutex_lock(&st->lock); Why not simply a guard(mutex)(&st->lock) ? Then we avoid the somewhat nasty label in an nested block of code. > + scoped_guard(mutex, &st->lock) { > + ret = ad7606_read_samples(st); > + if (ret) > + goto error_ret; > > - ret = ad7606_read_samples(st); > - if (ret == 0) > iio_push_to_buffers_with_timestamp(indio_dev, st->data, > iio_get_time_ns(indio_dev)); > - > - iio_trigger_notify_done(indio_dev->trig); > - /* The rising edge of the CONVST signal starts a new conversion. */ > - gpiod_set_value(st->gpio_convst, 1); > - > - mutex_unlock(&st->lock); > +error_ret: > + iio_trigger_notify_done(indio_dev->trig); > + /* The rising edge of the CONVST signal starts a new conversion. */ > + gpiod_set_value(st->gpio_convst, 1); > + } > > return IRQ_HANDLED; > } > @@ -259,17 +257,15 @@ static int ad7606_write_raw(struct iio_dev *indio_dev, > > switch (mask) { > case IIO_CHAN_INFO_SCALE: > - mutex_lock(&st->lock); > - i = find_closest(val2, st->scale_avail, st->num_scales); > - if (st->sw_mode_en) > - ch = chan->address; > - ret = st->write_scale(indio_dev, ch, i); > - if (ret < 0) { > - mutex_unlock(&st->lock); > - return ret; > + scoped_guard(mutex, &st->lock) { The mutex is grabbed in all paths that actually do anything. Pull it out of the switch and use guard(mutex)(&st->lock); That will reduce the changes needed and give the same cleanups. I doubt we care about potentially slowing down the path that returns an error as we are writing something unwriteable. > + i = find_closest(val2, st->scale_avail, st->num_scales); > + if (st->sw_mode_en) > + ch = chan->address; > + ret = st->write_scale(indio_dev, ch, i); > + if (ret < 0) > + return ret; > + st->range[ch] = i; > } > - st->range[ch] = i; > - mutex_unlock(&st->lock); > > return 0; > case IIO_CHAN_INFO_OVERSAMPLING_RATIO: > @@ -277,14 +273,12 @@ static int ad7606_write_raw(struct iio_dev *indio_dev, > return -EINVAL; > i = find_closest(val, st->oversampling_avail, > st->num_os_ratios); > - mutex_lock(&st->lock); > - ret = st->write_os(indio_dev, i); > - if (ret < 0) { > - mutex_unlock(&st->lock); > - return ret; > + scoped_guard(mutex, &st->lock) { > + ret = st->write_os(indio_dev, i); > + if (ret < 0) > + return ret; > + st->oversampling = st->oversampling_avail[i]; > } > - st->oversampling = st->oversampling_avail[i]; > - mutex_unlock(&st->lock); > > return 0; > default: >
diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c index 50ccc245e314..3c439787d130 100644 --- a/drivers/iio/adc/ad7606.c +++ b/drivers/iio/adc/ad7606.c @@ -69,19 +69,17 @@ static int ad7606_reg_access(struct iio_dev *indio_dev, struct ad7606_state *st = iio_priv(indio_dev); int ret; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); + if (readval) { ret = st->bops->reg_read(st, reg); if (ret < 0) - goto err_unlock; + return ret; *readval = ret; - ret = 0; + return 0; } else { - ret = st->bops->reg_write(st, reg, writeval); + return st->bops->reg_write(st, reg, writeval); } -err_unlock: - mutex_unlock(&st->lock); - return ret; } static int ad7606_read_samples(struct ad7606_state *st) @@ -124,18 +122,18 @@ static irqreturn_t ad7606_trigger_handler(int irq, void *p) struct ad7606_state *st = iio_priv(indio_dev); int ret; - mutex_lock(&st->lock); + scoped_guard(mutex, &st->lock) { + ret = ad7606_read_samples(st); + if (ret) + goto error_ret; - ret = ad7606_read_samples(st); - if (ret == 0) iio_push_to_buffers_with_timestamp(indio_dev, st->data, iio_get_time_ns(indio_dev)); - - iio_trigger_notify_done(indio_dev->trig); - /* The rising edge of the CONVST signal starts a new conversion. */ - gpiod_set_value(st->gpio_convst, 1); - - mutex_unlock(&st->lock); +error_ret: + iio_trigger_notify_done(indio_dev->trig); + /* The rising edge of the CONVST signal starts a new conversion. */ + gpiod_set_value(st->gpio_convst, 1); + } return IRQ_HANDLED; } @@ -259,17 +257,15 @@ static int ad7606_write_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_SCALE: - mutex_lock(&st->lock); - i = find_closest(val2, st->scale_avail, st->num_scales); - if (st->sw_mode_en) - ch = chan->address; - ret = st->write_scale(indio_dev, ch, i); - if (ret < 0) { - mutex_unlock(&st->lock); - return ret; + scoped_guard(mutex, &st->lock) { + i = find_closest(val2, st->scale_avail, st->num_scales); + if (st->sw_mode_en) + ch = chan->address; + ret = st->write_scale(indio_dev, ch, i); + if (ret < 0) + return ret; + st->range[ch] = i; } - st->range[ch] = i; - mutex_unlock(&st->lock); return 0; case IIO_CHAN_INFO_OVERSAMPLING_RATIO: @@ -277,14 +273,12 @@ static int ad7606_write_raw(struct iio_dev *indio_dev, return -EINVAL; i = find_closest(val, st->oversampling_avail, st->num_os_ratios); - mutex_lock(&st->lock); - ret = st->write_os(indio_dev, i); - if (ret < 0) { - mutex_unlock(&st->lock); - return ret; + scoped_guard(mutex, &st->lock) { + ret = st->write_os(indio_dev, i); + if (ret < 0) + return ret; + st->oversampling = st->oversampling_avail[i]; } - st->oversampling = st->oversampling_avail[i]; - mutex_unlock(&st->lock); return 0; default:
Switching to scoped_guard simplifies the code and avoids to take care to unlock the mutex in case of premature return. Signed-off-by: Guillaume Stols <gstols@baylibre.com> --- drivers/iio/adc/ad7606.c | 60 ++++++++++++++++++++++-------------------------- 1 file changed, 27 insertions(+), 33 deletions(-)