| Message ID | 20240627043317.3751996-7-chris.packham@alliedtelesis.co.nz (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | mips: Support for RTL9302C | expand |
On Thu, 27 Jun 2024 16:33:14 +1200, Chris Packham wrote: > Add a compatible string for the interrupt controller found on the > rtl930x SoCs. The interrupt controller has registers for VPE1 so these > are added as a second reg cell. > > Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> > --- > > Notes: > Changes in v3: > - Use items to describe the regs property > Changes in v2: > - Set reg:maxItems to 2 to allow for VPE1 registers on the rtl9300. Add > a condition to enforce the old limit on other SoCs. > - Connor and Krzysztof offered acks on v1 but I think the changes here > are big enough to void those. > > .../interrupt-controller/realtek,rtl-intc.yaml | 18 +++++++++++++++++- > 1 file changed, 17 insertions(+), 1 deletion(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.example.dtb: interrupt-controller@3000: reg: [[12288, 24]] is too short from schema $id: http://devicetree.org/schemas/interrupt-controller/realtek,rtl-intc.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240627043317.3751996-7-chris.packham@alliedtelesis.co.nz The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On 27/06/2024 06:33, Chris Packham wrote: > Add a compatible string for the interrupt controller found on the > rtl930x SoCs. The interrupt controller has registers for VPE1 so these > are added as a second reg cell. > > Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> > --- > > Notes: > Changes in v3: > - Use items to describe the regs property > Changes in v2: > - Set reg:maxItems to 2 to allow for VPE1 registers on the rtl9300. Add > a condition to enforce the old limit on other SoCs. > - Connor and Krzysztof offered acks on v1 but I think the changes here > are big enough to void those. > > .../interrupt-controller/realtek,rtl-intc.yaml | 18 +++++++++++++++++- > 1 file changed, 17 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml > index fb5593724059..d0e5bdf45d05 100644 > --- a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml > +++ b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml > @@ -25,6 +25,7 @@ properties: > - items: > - enum: > - realtek,rtl8380-intc > + - realtek,rtl9300-intc > - const: realtek,rtl-intc > - const: realtek,rtl-intc > deprecated: true > @@ -35,7 +36,9 @@ properties: > const: 1 > > reg: > - maxItems: 1 Missing minItems (as testing would tell you) > + items: > + - description: vpe0 registers > + - description: vpe1 registers > > interrupts: > minItems: 1 > @@ -71,6 +74,19 @@ allOf: > else: > required: > - interrupts > + - if: > + properties: > + compatible: > + contains: > + const: realtek,rtl9300-intc > + then: > + properties: > + reg: Needed is: minItems: 2 > + maxItems: 2 > + else: > + properties: > + reg: > + maxItems: 1 > > additionalProperties: false > Best regards, Krzysztof
On 27/06/24 19:41, Krzysztof Kozlowski wrote: > On 27/06/2024 06:33, Chris Packham wrote: >> Add a compatible string for the interrupt controller found on the >> rtl930x SoCs. The interrupt controller has registers for VPE1 so these >> are added as a second reg cell. >> >> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> >> --- >> >> Notes: >> Changes in v3: >> - Use items to describe the regs property >> Changes in v2: >> - Set reg:maxItems to 2 to allow for VPE1 registers on the rtl9300. Add >> a condition to enforce the old limit on other SoCs. >> - Connor and Krzysztof offered acks on v1 but I think the changes here >> are big enough to void those. >> >> .../interrupt-controller/realtek,rtl-intc.yaml | 18 +++++++++++++++++- >> 1 file changed, 17 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml >> index fb5593724059..d0e5bdf45d05 100644 >> --- a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml >> +++ b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml >> @@ -25,6 +25,7 @@ properties: >> - items: >> - enum: >> - realtek,rtl8380-intc >> + - realtek,rtl9300-intc >> - const: realtek,rtl-intc >> - const: realtek,rtl-intc >> deprecated: true >> @@ -35,7 +36,9 @@ properties: >> const: 1 >> >> reg: >> - maxItems: 1 > Missing minItems (as testing would tell you) Hmm I really did test this. Even now running `make ARCH=mips O=build_mips DT_SCHEMA_FILES=realtek,rtl-intc.yaml:realtek-rtl.yaml:realtek,otto-timer.yaml clean dt_binding_check` doesn't seem to yield any complaints. Am I testing this properly? > >> + items: >> + - description: vpe0 registers >> + - description: vpe1 registers >> >> interrupts: >> minItems: 1 >> @@ -71,6 +74,19 @@ allOf: >> else: >> required: >> - interrupts >> + - if: >> + properties: >> + compatible: >> + contains: >> + const: realtek,rtl9300-intc >> + then: >> + properties: >> + reg: > Needed is: minItems: 2 > >> + maxItems: 2 >> + else: >> + properties: >> + reg: >> + maxItems: 1 >> >> additionalProperties: false >> > Best regards, > Krzysztof >
On 1/07/24 10:12, Chris Packham wrote: > > On 27/06/24 19:41, Krzysztof Kozlowski wrote: >> On 27/06/2024 06:33, Chris Packham wrote: >>> Add a compatible string for the interrupt controller found on the >>> rtl930x SoCs. The interrupt controller has registers for VPE1 so these >>> are added as a second reg cell. >>> >>> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> >>> --- >>> >>> Notes: >>> Changes in v3: >>> - Use items to describe the regs property >>> Changes in v2: >>> - Set reg:maxItems to 2 to allow for VPE1 registers on the >>> rtl9300. Add >>> a condition to enforce the old limit on other SoCs. >>> - Connor and Krzysztof offered acks on v1 but I think the >>> changes here >>> are big enough to void those. >>> >>> .../interrupt-controller/realtek,rtl-intc.yaml | 18 >>> +++++++++++++++++- >>> 1 file changed, 17 insertions(+), 1 deletion(-) >>> >>> diff --git >>> a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml >>> b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml >>> >>> index fb5593724059..d0e5bdf45d05 100644 >>> --- >>> a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml >>> +++ >>> b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml >>> @@ -25,6 +25,7 @@ properties: >>> - items: >>> - enum: >>> - realtek,rtl8380-intc >>> + - realtek,rtl9300-intc >>> - const: realtek,rtl-intc >>> - const: realtek,rtl-intc >>> deprecated: true >>> @@ -35,7 +36,9 @@ properties: >>> const: 1 >>> reg: >>> - maxItems: 1 >> Missing minItems (as testing would tell you) > > Hmm I really did test this. Even now running > > `make ARCH=mips O=build_mips > DT_SCHEMA_FILES=realtek,rtl-intc.yaml:realtek-rtl.yaml:realtek,otto-timer.yaml > clean dt_binding_check` doesn't seem to yield any complaints. Am I > testing this properly? Looks like there is a difference between `DT_SCHEMA_FILES=realtek,rtl-intc.yaml` and `DT_SCHEMA_FILES=realtek,rtl-intc.yaml:realtek-rtl.yaml:realtek,otto-timer.yaml`. > > >> >>> + items: >>> + - description: vpe0 registers >>> + - description: vpe1 registers >>> interrupts: >>> minItems: 1 >>> @@ -71,6 +74,19 @@ allOf: >>> else: >>> required: >>> - interrupts >>> + - if: >>> + properties: >>> + compatible: >>> + contains: >>> + const: realtek,rtl9300-intc >>> + then: >>> + properties: >>> + reg: >> Needed is: minItems: 2 >> >>> + maxItems: 2 >>> + else: >>> + properties: >>> + reg: >>> + maxItems: 1 >>> additionalProperties: false >> Best regards, >> Krzysztof >>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml index fb5593724059..d0e5bdf45d05 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml @@ -25,6 +25,7 @@ properties: - items: - enum: - realtek,rtl8380-intc + - realtek,rtl9300-intc - const: realtek,rtl-intc - const: realtek,rtl-intc deprecated: true @@ -35,7 +36,9 @@ properties: const: 1 reg: - maxItems: 1 + items: + - description: vpe0 registers + - description: vpe1 registers interrupts: minItems: 1 @@ -71,6 +74,19 @@ allOf: else: required: - interrupts + - if: + properties: + compatible: + contains: + const: realtek,rtl9300-intc + then: + properties: + reg: + maxItems: 2 + else: + properties: + reg: + maxItems: 1 additionalProperties: false
Add a compatible string for the interrupt controller found on the rtl930x SoCs. The interrupt controller has registers for VPE1 so these are added as a second reg cell. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> --- Notes: Changes in v3: - Use items to describe the regs property Changes in v2: - Set reg:maxItems to 2 to allow for VPE1 registers on the rtl9300. Add a condition to enforce the old limit on other SoCs. - Connor and Krzysztof offered acks on v1 but I think the changes here are big enough to void those. .../interrupt-controller/realtek,rtl-intc.yaml | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)