Message ID | 20240628095139.292952-5-quic_hprem@quicinc.com (mailing list archive) |
---|---|
State | Changes Requested |
Delegated to: | Kalle Valo |
Headers | show |
Series | wifi: ath12k: Introduce device group abstraction | expand |
On 6/28/2024 2:51 AM, Harshitha Prem wrote: > From: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> > > When hardware device group abstraction is introduced, QMI firmware > ready event of different devices in a group can be received simultaneously. > > To indicate firmware ready event is completed for a particular device in a > group set a flag (ATH12K_FLAG_QMI_FW_READY_COMPLETE). This would be > helpful when hardware recovery is introduced for hardware device group > abstraction. > > Add changes to set/unset ATH12K_FLAG_QMI_FW_READY_COMPLETE flag for a > device. > > Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 > Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 > > Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> > Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
diff --git a/drivers/net/wireless/ath/ath12k/core.c b/drivers/net/wireless/ath/ath12k/core.c index 690896c1cca1..fd840a6a94e0 100644 --- a/drivers/net/wireless/ath/ath12k/core.c +++ b/drivers/net/wireless/ath/ath12k/core.c @@ -1140,7 +1140,7 @@ static void ath12k_core_reset(struct work_struct *work) int reset_count, fail_cont_count; long time_left; - if (!(test_bit(ATH12K_FLAG_REGISTERED, &ab->dev_flags))) { + if (!(test_bit(ATH12K_FLAG_QMI_FW_READY_COMPLETE, &ab->dev_flags))) { ath12k_warn(ab, "ignore reset dev flags 0x%lx\n", ab->dev_flags); return; } diff --git a/drivers/net/wireless/ath/ath12k/core.h b/drivers/net/wireless/ath/ath12k/core.h index e7238dab16a0..c747cc71984c 100644 --- a/drivers/net/wireless/ath/ath12k/core.h +++ b/drivers/net/wireless/ath/ath12k/core.h @@ -210,6 +210,7 @@ enum ath12k_dev_flags { ATH12K_FLAG_HTC_SUSPEND_COMPLETE, ATH12K_FLAG_CE_IRQ_ENABLED, ATH12K_FLAG_EXT_IRQ_ENABLED, + ATH12K_FLAG_QMI_FW_READY_COMPLETE, }; struct ath12k_tx_conf { diff --git a/drivers/net/wireless/ath/ath12k/qmi.c b/drivers/net/wireless/ath/ath12k/qmi.c index 4028672864b3..66f50dae8dd6 100644 --- a/drivers/net/wireless/ath/ath12k/qmi.c +++ b/drivers/net/wireless/ath/ath12k/qmi.c @@ -3023,6 +3023,8 @@ void ath12k_qmi_firmware_stop(struct ath12k_base *ab) { int ret; + clear_bit(ATH12K_FLAG_QMI_FW_READY_COMPLETE, &ab->dev_flags); + ret = ath12k_qmi_wlanfw_mode_send(ab, ATH12K_FIRMWARE_MODE_OFF); if (ret < 0) { ath12k_warn(ab, "qmi failed to send wlan mode off\n"); @@ -3320,7 +3322,7 @@ static void ath12k_qmi_driver_event_work(struct work_struct *work) break; case ATH12K_QMI_EVENT_FW_READY: clear_bit(ATH12K_FLAG_QMI_FAIL, &ab->dev_flags); - if (test_bit(ATH12K_FLAG_REGISTERED, &ab->dev_flags)) { + if (test_bit(ATH12K_FLAG_QMI_FW_READY_COMPLETE, &ab->dev_flags)) { if (ab->is_reset) ath12k_hal_dump_srng_stats(ab); queue_work(ab->workqueue, &ab->restart_work); @@ -3330,8 +3332,12 @@ static void ath12k_qmi_driver_event_work(struct work_struct *work) clear_bit(ATH12K_FLAG_CRASH_FLUSH, &ab->dev_flags); clear_bit(ATH12K_FLAG_RECOVERY, &ab->dev_flags); - ath12k_core_qmi_firmware_ready(ab); - set_bit(ATH12K_FLAG_REGISTERED, &ab->dev_flags); + ret = ath12k_core_qmi_firmware_ready(ab); + if (!ret) { + set_bit(ATH12K_FLAG_QMI_FW_READY_COMPLETE, + &ab->dev_flags); + set_bit(ATH12K_FLAG_REGISTERED, &ab->dev_flags); + } break; default: