| Message ID | 1342189185-5306-4-git-send-email-t-kristo@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Friday 13 July 2012 07:49 PM, Tero Kristo wrote: > These are updated based on powerdomain usecounts. Also added support > for voltdm->sleep and voltdm->wakeup calls that will be invoked once > voltagedomain enters sleep or wakes up based on usecount numbers. These > will be used for controlling voltage scaling functionality. > > Signed-off-by: Tero Kristo<t-kristo@ti.com> > Cc: Paul Walmsley<paul@pwsan.com> > Cc: Kevin Hilman<khilman@ti.com> Reviewed-by: Rajendra Nayak <rnayak@ti.com> I am working on a series to cleanup CPUidle, on top of this series, where I add similar callbacks at the pwrdm level too. Something like pwrdm->power_on and pwrdm->power_down. Helps get rid of a lot of code stuffed inside idle/suspend. > arch/arm/mach-omap2/powerdomain.c | 6 +++- > arch/arm/mach-omap2/voltage.c | 56 +++++++++++++++++++++++++++++++++++++ > arch/arm/mach-omap2/voltage.h | 11 +++++++ > 3 files changed, 72 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c > index 68bdf36..3b4b15d 100644 > --- a/arch/arm/mach-omap2/powerdomain.c > +++ b/arch/arm/mach-omap2/powerdomain.c > @@ -994,7 +994,8 @@ void pwrdm_clkdm_enable(struct powerdomain *pwrdm) > if (!pwrdm) > return; > > - atomic_inc(&pwrdm->usecount); > + if (atomic_inc_return(&pwrdm->usecount) == 1) > + voltdm_pwrdm_enable(pwrdm->voltdm.ptr); > } > > /** > @@ -1013,6 +1014,9 @@ void pwrdm_clkdm_disable(struct powerdomain *pwrdm) > > val = atomic_dec_return(&pwrdm->usecount); > > + if (!val) > + voltdm_pwrdm_disable(pwrdm->voltdm.ptr); > + > BUG_ON(val< 0); > } > > diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c > index 4dc60e8..8c6439b 100644 > --- a/arch/arm/mach-omap2/voltage.c > +++ b/arch/arm/mach-omap2/voltage.c > @@ -38,6 +38,7 @@ > > #include "voltage.h" > #include "powerdomain.h" > +#include "smartreflex.h" > > #include "vc.h" > #include "vp.h" > @@ -340,6 +341,61 @@ int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm) > } > > /** > + * voltdm_pwrdm_enable - increase usecount for a voltagedomain > + * @voltdm: struct voltagedomain * to increase count for > + * > + * Increases usecount for a given voltagedomain. If the usecount reaches > + * 1, the domain is awakened from idle and the function will call the > + * voltagedomain->wakeup callback for this domain. > + */ > +void voltdm_pwrdm_enable(struct voltagedomain *voltdm) > +{ > + if (!voltdm) > + return; > + > + if (atomic_inc_return(&voltdm->usecount) == 1) { > + if (voltdm->wakeup) > + voltdm->wakeup(voltdm); > + } > +} > + > +/** > + * voltdm_pwrdm_disable - decrease usecount for a voltagedomain > + * @voltdm: struct voltagedomain * to decrease count for > + * > + * Decreases the usecount for a given voltagedomain. If the usecount > + * reaches zero, the domain can idle and the function will call the > + * voltagedomain->sleep callback, and calculate the overall target > + * state for the voltagedomain. > + */ > +void voltdm_pwrdm_disable(struct voltagedomain *voltdm) > +{ > + u8 target_state = PWRDM_POWER_OFF; > + int state; > + struct powerdomain *pwrdm; > + int val; > + > + if (!voltdm) > + return; > + > + val = atomic_dec_return(&voltdm->usecount); > + > + BUG_ON(val< 0); > + > + if (val == 0) { > + /* Determine target state for voltdm */ > + list_for_each_entry(pwrdm,&voltdm->pwrdm_list, voltdm_node) { > + state = pwrdm_read_next_pwrst(pwrdm); > + if (state> target_state) > + target_state = state; > + } > + voltdm->target_state = target_state; > + if (voltdm->sleep) > + voltdm->sleep(voltdm); > + } > +} > + > +/** > * voltdm_for_each_pwrdm - call function for each pwrdm in a voltdm > * @voltdm: struct voltagedomain * to iterate over > * @fn: callback function * > diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h > index 16a1b09..c1f4ae8 100644 > --- a/arch/arm/mach-omap2/voltage.h > +++ b/arch/arm/mach-omap2/voltage.h > @@ -54,10 +54,14 @@ struct omap_vfsm_instance { > * @pwrdm_list: list_head linking all powerdomains in this voltagedomain > * @vc: pointer to VC channel associated with this voltagedomain > * @vp: pointer to VP associated with this voltagedomain > + * @usecount: number of users for this voltagedomain > + * @target_state: calculated target state for the children of this domain > * @read: read a VC/VP register > * @write: write a VC/VP register > * @read: read-modify-write a VC/VP register > * @sys_clk: system clock name/frequency, used for various timing calculations > + * @sleep: function to call once the domain enters idle > + * @wakeup: function to call once the domain wakes up from idle > * @scale: function used to scale the voltage of the voltagedomain > * @nominal_volt: current nominal voltage for this voltage domain > * @volt_data: voltage table having the distinct voltages supported > @@ -73,6 +77,9 @@ struct voltagedomain { > struct omap_vp_instance *vp; > struct omap_voltdm_pmic *pmic; > > + atomic_t usecount; > + u8 target_state; > + > /* VC/VP register access functions: SoC specific */ > u32 (*read) (u8 offset); > void (*write) (u32 val, u8 offset); > @@ -83,6 +90,8 @@ struct voltagedomain { > u32 rate; > } sys_clk; > > + void (*sleep) (struct voltagedomain *voltdm); > + void (*wakeup) (struct voltagedomain *voltdm); > int (*scale) (struct voltagedomain *voltdm, > unsigned long target_volt); > > @@ -161,6 +170,8 @@ extern void omap44xx_voltagedomains_init(void); > struct voltagedomain *voltdm_lookup(const char *name); > void voltdm_init(struct voltagedomain **voltdm_list); > int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm); > +void voltdm_pwrdm_enable(struct voltagedomain *voltdm); > +void voltdm_pwrdm_disable(struct voltagedomain *voltdm); > int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user), > void *user); > int voltdm_for_each_pwrdm(struct voltagedomain *voltdm, -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Tero, > -----Original Message----- > From: linux-omap-owner@vger.kernel.org [mailto:linux-omap- > owner@vger.kernel.org] On Behalf Of Tero Kristo > Sent: Friday, July 13, 2012 9:20 AM > To: linux-omap@vger.kernel.org; paul@pwsan.com; khilman@ti.com > Cc: linux-arm-kernel@lists.infradead.org > Subject: [PATCHv4 3/8] ARM: OMAP3+: voltage: add support for > voltagedomain usecounts > > These are updated based on powerdomain usecounts. Also added support > for voltdm->sleep and voltdm->wakeup calls that will be invoked once > voltagedomain enters sleep or wakes up based on usecount numbers. > These > will be used for controlling voltage scaling functionality. > > Signed-off-by: Tero Kristo <t-kristo@ti.com> > Cc: Paul Walmsley <paul@pwsan.com> > Cc: Kevin Hilman <khilman@ti.com> > --- > arch/arm/mach-omap2/powerdomain.c | 6 +++- > arch/arm/mach-omap2/voltage.c | 56 > +++++++++++++++++++++++++++++++++++++ > arch/arm/mach-omap2/voltage.h | 11 +++++++ > 3 files changed, 72 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach- > omap2/powerdomain.c > index 68bdf36..3b4b15d 100644 > --- a/arch/arm/mach-omap2/powerdomain.c > +++ b/arch/arm/mach-omap2/powerdomain.c > @@ -994,7 +994,8 @@ void pwrdm_clkdm_enable(struct powerdomain > *pwrdm) > if (!pwrdm) > return; > > - atomic_inc(&pwrdm->usecount); > + if (atomic_inc_return(&pwrdm->usecount) == 1) > + voltdm_pwrdm_enable(pwrdm->voltdm.ptr); > } > > /** > @@ -1013,6 +1014,9 @@ void pwrdm_clkdm_disable(struct powerdomain > *pwrdm) > > val = atomic_dec_return(&pwrdm->usecount); > > + if (!val) > + voltdm_pwrdm_disable(pwrdm->voltdm.ptr); > + > BUG_ON(val < 0); > } > > diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach- > omap2/voltage.c > index 4dc60e8..8c6439b 100644 > --- a/arch/arm/mach-omap2/voltage.c > +++ b/arch/arm/mach-omap2/voltage.c > @@ -38,6 +38,7 @@ > > #include "voltage.h" > #include "powerdomain.h" > +#include "smartreflex.h" > > #include "vc.h" > #include "vp.h" > @@ -340,6 +341,61 @@ int voltdm_add_pwrdm(struct voltagedomain > *voltdm, struct powerdomain *pwrdm) > } > > /** > + * voltdm_pwrdm_enable - increase usecount for a voltagedomain > + * @voltdm: struct voltagedomain * to increase count for > + * > + * Increases usecount for a given voltagedomain. If the usecount > reaches > + * 1, the domain is awakened from idle and the function will call > the > + * voltagedomain->wakeup callback for this domain. > + */ > +void voltdm_pwrdm_enable(struct voltagedomain *voltdm) > +{ > + if (!voltdm) > + return; > + > + if (atomic_inc_return(&voltdm->usecount) == 1) { > + if (voltdm->wakeup) > + voltdm->wakeup(voltdm); > + } > +} I think these usecounting functions are prone to race conditions and need to be protected using spin_lock or something like that (not just the usecounter). Otherwise right sequence will not be followed when multiple modules try to idle and enable simultaneously. You can see this issue when 2 cpus enter idle independently. Regards Vishwa > + > +/** > + * voltdm_pwrdm_disable - decrease usecount for a voltagedomain > + * @voltdm: struct voltagedomain * to decrease count for > + * > + * Decreases the usecount for a given voltagedomain. If the > usecount > + * reaches zero, the domain can idle and the function will call the > + * voltagedomain->sleep callback, and calculate the overall target > + * state for the voltagedomain. > + */ > +void voltdm_pwrdm_disable(struct voltagedomain *voltdm) > +{ > + u8 target_state = PWRDM_POWER_OFF; > + int state; > + struct powerdomain *pwrdm; > + int val; > + > + if (!voltdm) > + return; > + > + val = atomic_dec_return(&voltdm->usecount); > + > + BUG_ON(val < 0); > + > + if (val == 0) { > + /* Determine target state for voltdm */ > + list_for_each_entry(pwrdm, &voltdm->pwrdm_list, > voltdm_node) { > + state = pwrdm_read_next_pwrst(pwrdm); > + if (state > target_state) > + target_state = state; > + } > + voltdm->target_state = target_state; > + if (voltdm->sleep) > + voltdm->sleep(voltdm); > + } > +} > + > +/** > * voltdm_for_each_pwrdm - call function for each pwrdm in a voltdm > * @voltdm: struct voltagedomain * to iterate over > * @fn: callback function * > diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach- > omap2/voltage.h > index 16a1b09..c1f4ae8 100644 > --- a/arch/arm/mach-omap2/voltage.h > +++ b/arch/arm/mach-omap2/voltage.h > @@ -54,10 +54,14 @@ struct omap_vfsm_instance { > * @pwrdm_list: list_head linking all powerdomains in this > voltagedomain > * @vc: pointer to VC channel associated with this voltagedomain > * @vp: pointer to VP associated with this voltagedomain > + * @usecount: number of users for this voltagedomain > + * @target_state: calculated target state for the children of this > domain > * @read: read a VC/VP register > * @write: write a VC/VP register > * @read: read-modify-write a VC/VP register > * @sys_clk: system clock name/frequency, used for various timing > calculations > + * @sleep: function to call once the domain enters idle > + * @wakeup: function to call once the domain wakes up from idle > * @scale: function used to scale the voltage of the voltagedomain > * @nominal_volt: current nominal voltage for this voltage domain > * @volt_data: voltage table having the distinct voltages supported > @@ -73,6 +77,9 @@ struct voltagedomain { > struct omap_vp_instance *vp; > struct omap_voltdm_pmic *pmic; > > + atomic_t usecount; > + u8 target_state; > + > /* VC/VP register access functions: SoC specific */ > u32 (*read) (u8 offset); > void (*write) (u32 val, u8 offset); > @@ -83,6 +90,8 @@ struct voltagedomain { > u32 rate; > } sys_clk; > > + void (*sleep) (struct voltagedomain *voltdm); > + void (*wakeup) (struct voltagedomain *voltdm); > int (*scale) (struct voltagedomain *voltdm, > unsigned long target_volt); > > @@ -161,6 +170,8 @@ extern void omap44xx_voltagedomains_init(void); > struct voltagedomain *voltdm_lookup(const char *name); > void voltdm_init(struct voltagedomain **voltdm_list); > int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct > powerdomain *pwrdm); > +void voltdm_pwrdm_enable(struct voltagedomain *voltdm); > +void voltdm_pwrdm_disable(struct voltagedomain *voltdm); > int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void > *user), > void *user); > int voltdm_for_each_pwrdm(struct voltagedomain *voltdm, > -- > 1.7.4.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux- > omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 2012-07-24 at 15:58 -0500, Vishwanath Sripathy wrote: > Tero, > > > -----Original Message----- > > From: linux-omap-owner@vger.kernel.org [mailto:linux-omap- > > owner@vger.kernel.org] On Behalf Of Tero Kristo > > Sent: Friday, July 13, 2012 9:20 AM > > To: linux-omap@vger.kernel.org; paul@pwsan.com; khilman@ti.com > > Cc: linux-arm-kernel@lists.infradead.org > > Subject: [PATCHv4 3/8] ARM: OMAP3+: voltage: add support for > > voltagedomain usecounts > > > > These are updated based on powerdomain usecounts. Also added support > > for voltdm->sleep and voltdm->wakeup calls that will be invoked once > > voltagedomain enters sleep or wakes up based on usecount numbers. > > These > > will be used for controlling voltage scaling functionality. > > > > Signed-off-by: Tero Kristo <t-kristo@ti.com> > > Cc: Paul Walmsley <paul@pwsan.com> > > Cc: Kevin Hilman <khilman@ti.com> > > --- > > arch/arm/mach-omap2/powerdomain.c | 6 +++- > > arch/arm/mach-omap2/voltage.c | 56 > > +++++++++++++++++++++++++++++++++++++ > > arch/arm/mach-omap2/voltage.h | 11 +++++++ > > 3 files changed, 72 insertions(+), 1 deletions(-) > > > > diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach- > > omap2/powerdomain.c > > index 68bdf36..3b4b15d 100644 > > --- a/arch/arm/mach-omap2/powerdomain.c > > +++ b/arch/arm/mach-omap2/powerdomain.c > > @@ -994,7 +994,8 @@ void pwrdm_clkdm_enable(struct powerdomain > > *pwrdm) > > if (!pwrdm) > > return; > > > > - atomic_inc(&pwrdm->usecount); > > + if (atomic_inc_return(&pwrdm->usecount) == 1) > > + voltdm_pwrdm_enable(pwrdm->voltdm.ptr); > > } > > > > /** > > @@ -1013,6 +1014,9 @@ void pwrdm_clkdm_disable(struct powerdomain > > *pwrdm) > > > > val = atomic_dec_return(&pwrdm->usecount); > > > > + if (!val) > > + voltdm_pwrdm_disable(pwrdm->voltdm.ptr); > > + > > BUG_ON(val < 0); > > } > > > > diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach- > > omap2/voltage.c > > index 4dc60e8..8c6439b 100644 > > --- a/arch/arm/mach-omap2/voltage.c > > +++ b/arch/arm/mach-omap2/voltage.c > > @@ -38,6 +38,7 @@ > > > > #include "voltage.h" > > #include "powerdomain.h" > > +#include "smartreflex.h" > > > > #include "vc.h" > > #include "vp.h" > > @@ -340,6 +341,61 @@ int voltdm_add_pwrdm(struct voltagedomain > > *voltdm, struct powerdomain *pwrdm) > > } > > > > /** > > + * voltdm_pwrdm_enable - increase usecount for a voltagedomain > > + * @voltdm: struct voltagedomain * to increase count for > > + * > > + * Increases usecount for a given voltagedomain. If the usecount > > reaches > > + * 1, the domain is awakened from idle and the function will call > > the > > + * voltagedomain->wakeup callback for this domain. > > + */ > > +void voltdm_pwrdm_enable(struct voltagedomain *voltdm) > > +{ > > + if (!voltdm) > > + return; > > + > > + if (atomic_inc_return(&voltdm->usecount) == 1) { > > + if (voltdm->wakeup) > > + voltdm->wakeup(voltdm); > > + } > > +} > I think these usecounting functions are prone to race conditions and need > to be protected using spin_lock or something like that (not just the > usecounter). Otherwise right sequence will not be followed when multiple > modules try to idle and enable simultaneously. You can see this issue when > 2 cpus enter idle independently. Yes, you are right... something like this needs to be added for SMP once individual cpuidle is in place. I'll add this kind of fix for the next version. -Tero -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 68bdf36..3b4b15d 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -994,7 +994,8 @@ void pwrdm_clkdm_enable(struct powerdomain *pwrdm) if (!pwrdm) return; - atomic_inc(&pwrdm->usecount); + if (atomic_inc_return(&pwrdm->usecount) == 1) + voltdm_pwrdm_enable(pwrdm->voltdm.ptr); } /** @@ -1013,6 +1014,9 @@ void pwrdm_clkdm_disable(struct powerdomain *pwrdm) val = atomic_dec_return(&pwrdm->usecount); + if (!val) + voltdm_pwrdm_disable(pwrdm->voltdm.ptr); + BUG_ON(val < 0); } diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 4dc60e8..8c6439b 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -38,6 +38,7 @@ #include "voltage.h" #include "powerdomain.h" +#include "smartreflex.h" #include "vc.h" #include "vp.h" @@ -340,6 +341,61 @@ int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm) } /** + * voltdm_pwrdm_enable - increase usecount for a voltagedomain + * @voltdm: struct voltagedomain * to increase count for + * + * Increases usecount for a given voltagedomain. If the usecount reaches + * 1, the domain is awakened from idle and the function will call the + * voltagedomain->wakeup callback for this domain. + */ +void voltdm_pwrdm_enable(struct voltagedomain *voltdm) +{ + if (!voltdm) + return; + + if (atomic_inc_return(&voltdm->usecount) == 1) { + if (voltdm->wakeup) + voltdm->wakeup(voltdm); + } +} + +/** + * voltdm_pwrdm_disable - decrease usecount for a voltagedomain + * @voltdm: struct voltagedomain * to decrease count for + * + * Decreases the usecount for a given voltagedomain. If the usecount + * reaches zero, the domain can idle and the function will call the + * voltagedomain->sleep callback, and calculate the overall target + * state for the voltagedomain. + */ +void voltdm_pwrdm_disable(struct voltagedomain *voltdm) +{ + u8 target_state = PWRDM_POWER_OFF; + int state; + struct powerdomain *pwrdm; + int val; + + if (!voltdm) + return; + + val = atomic_dec_return(&voltdm->usecount); + + BUG_ON(val < 0); + + if (val == 0) { + /* Determine target state for voltdm */ + list_for_each_entry(pwrdm, &voltdm->pwrdm_list, voltdm_node) { + state = pwrdm_read_next_pwrst(pwrdm); + if (state > target_state) + target_state = state; + } + voltdm->target_state = target_state; + if (voltdm->sleep) + voltdm->sleep(voltdm); + } +} + +/** * voltdm_for_each_pwrdm - call function for each pwrdm in a voltdm * @voltdm: struct voltagedomain * to iterate over * @fn: callback function * diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 16a1b09..c1f4ae8 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -54,10 +54,14 @@ struct omap_vfsm_instance { * @pwrdm_list: list_head linking all powerdomains in this voltagedomain * @vc: pointer to VC channel associated with this voltagedomain * @vp: pointer to VP associated with this voltagedomain + * @usecount: number of users for this voltagedomain + * @target_state: calculated target state for the children of this domain * @read: read a VC/VP register * @write: write a VC/VP register * @read: read-modify-write a VC/VP register * @sys_clk: system clock name/frequency, used for various timing calculations + * @sleep: function to call once the domain enters idle + * @wakeup: function to call once the domain wakes up from idle * @scale: function used to scale the voltage of the voltagedomain * @nominal_volt: current nominal voltage for this voltage domain * @volt_data: voltage table having the distinct voltages supported @@ -73,6 +77,9 @@ struct voltagedomain { struct omap_vp_instance *vp; struct omap_voltdm_pmic *pmic; + atomic_t usecount; + u8 target_state; + /* VC/VP register access functions: SoC specific */ u32 (*read) (u8 offset); void (*write) (u32 val, u8 offset); @@ -83,6 +90,8 @@ struct voltagedomain { u32 rate; } sys_clk; + void (*sleep) (struct voltagedomain *voltdm); + void (*wakeup) (struct voltagedomain *voltdm); int (*scale) (struct voltagedomain *voltdm, unsigned long target_volt); @@ -161,6 +170,8 @@ extern void omap44xx_voltagedomains_init(void); struct voltagedomain *voltdm_lookup(const char *name); void voltdm_init(struct voltagedomain **voltdm_list); int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm); +void voltdm_pwrdm_enable(struct voltagedomain *voltdm); +void voltdm_pwrdm_disable(struct voltagedomain *voltdm); int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user), void *user); int voltdm_for_each_pwrdm(struct voltagedomain *voltdm,
These are updated based on powerdomain usecounts. Also added support for voltdm->sleep and voltdm->wakeup calls that will be invoked once voltagedomain enters sleep or wakes up based on usecount numbers. These will be used for controlling voltage scaling functionality. Signed-off-by: Tero Kristo <t-kristo@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> --- arch/arm/mach-omap2/powerdomain.c | 6 +++- arch/arm/mach-omap2/voltage.c | 56 +++++++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/voltage.h | 11 +++++++ 3 files changed, 72 insertions(+), 1 deletions(-)