diff mbox series

[v2,2/2] arm64: dts: rockchip: add ROCK 5 ITX board

Message ID 20240704095524.788607-3-heiko@sntech.de (mailing list archive)
State New
Headers show
Series ROCK 5 ITX devicetree | expand

Commit Message

Heiko Stuebner July 4, 2024, 9:55 a.m. UTC
The ROCK 5 ITX as the name suggests is made in the ITX form factor and
actually built in a form to be used in a regular case even providing
connectors for regular front-panel io.

It can be powered either by 12V, ATX power-supply or PoE.

Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot,
2*2.5Gb PCIe-connected Ethernet NICs.

As of yet unsupported display options consist of 2*HDMI, DP via USB-c,
eDP + 2*DSI via PCB connectors.

USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel
connector.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm64/boot/dts/rockchip/Makefile         |    1 +
 .../boot/dts/rockchip/rk3588-rock-5-itx.dts   | 1186 +++++++++++++++++
 2 files changed, 1187 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts

Comments

Heiko Stuebner July 4, 2024, 10:34 a.m. UTC | #1
Am Donnerstag, 4. Juli 2024, 11:55:24 CEST schrieb Heiko Stuebner:
> The ROCK 5 ITX as the name suggests is made in the ITX form factor and
> actually built in a form to be used in a regular case even providing
> connectors for regular front-panel io.
> 
> It can be powered either by 12V, ATX power-supply or PoE.
> 
> Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot,
> 2*2.5Gb PCIe-connected Ethernet NICs.
> 
> As of yet unsupported display options consist of 2*HDMI, DP via USB-c,
> eDP + 2*DSI via PCB connectors.
> 
> USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel
> connector.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |    1 +
>  .../boot/dts/rockchip/rk3588-rock-5-itx.dts   | 1186 +++++++++++++++++
>  2 files changed, 1187 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index e8eba631da23e..41ee495a91f6b 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -129,6 +129,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtbo
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtbo
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
> new file mode 100644
> index 0000000000000..605277525a4ad
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
> @@ -0,0 +1,1186 @@

[...]

> +/* FUSB302 and LCD1 connector */
> +&i2c8 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c8m4_xfer>;
> +	status = "okay";
> +
> +	usbc0: usb-typec@22 {
> +		compatible = "fcs,fusb302";
> +		reg = <0x22>;
> +		interrupt-parent = <&gpio3>;
> +		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&usbc0_int>;
> +		vbus-supply = <&typec_vin>;
> +
> +		usb_con: connector {
> +			compatible = "usb-c-connector";
> +			label = "USB-C";
> +			data-role = "dual";
> +			power-role = "dual";
> +			try-power-role = "sink";
> +			op-sink-microwatt = <1000000>;
> +			sink-pdos =
> +				<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
> +			source-pdos =
> +				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;

as sigmaris noted on IRC:
  I think the usb-c-connector on the Rock 5 ITX dts should not be a PD sink.
  The schematic from Radxa shows TYPEC_VIN only connected to the output
  of regulator U2603, there is no power path I can see for it to power the
  board [...] and powering via USB-C isn't mentioned in the other docs

  and I'd remove try-power-role and sink-pdos (try-power-role seems
  optional if power-role is not dual)

  and also remove op-sink-microwatt
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index e8eba631da23e..41ee495a91f6b 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -129,6 +129,7 @@  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtbo
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
new file mode 100644
index 0000000000000..605277525a4ad
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
@@ -0,0 +1,1186 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Limited
+ * Copyright (c) 2024 Heiko Stuebner <heiko@sntech.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "dt-bindings/usb/pd.h"
+#include "rk3588.dtsi"
+
+/ {
+	model = "Radxa ROCK 5 ITX";
+	compatible = "radxa,rock-5-itx", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc_keys: adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-maskrom {
+			label = "Mask Rom";
+			linux,code = <KEY_SETUP>;
+			press-threshold-microvolt = <1750>;
+		};
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		label = "rk3588-es8316";
+
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+
+		dais = <&i2s0_8ch_p0>;
+		hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_detect>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		power-led1 {
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		hdd-led2 {
+			gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		cooling-levels = <0 64 128 192 255>;
+		fan-supply = <&vcc12v_dcin>;
+		pwms = <&pwm14 0 10000 0>;
+	};
+
+	/* M.2 E-KEY */
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
+	};
+
+	typec_vin: regulator-typec-vin {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus5v0_typec_en>;
+		regulator-name = "typec_vin";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc12v_dcin: regulator-vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc33_io64: regulator-vcc33-io64 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33_io64";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_ekey: regulator-vcc3v3-ekey {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ekey_en>;
+		regulator-name = "vcc3v3_ekey";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_lan: vcc3v3_lan_phy2: regulator-vcc3v3-lan {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lan";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc3v3_mkey: regulator-vcc3v3-mkey {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie30x4_pwren_h>;
+		regulator-name = "vcc3v3_mkey";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: regulator-vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb20: vcc5v0_usb12: vcc5v0_usb34: regulator-vcc5v0-usb {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren_h>;
+		regulator-name = "vcc5v0_usb";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1m2_xfer>;
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+/* CAM0 connector */
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3m0_xfer>;
+};
+
+/* M.2 E-key */
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4m1_xfer>;
+};
+
+/* RTC and LCD0 connector */
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6m0_xfer>;
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "wifi_32kout";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+/* Audio codec and CAM1 connector */
+&i2c7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7m0_xfer>;
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+/* FUSB302 and LCD1 connector */
+&i2c8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c8m4_xfer>;
+	status = "okay";
+
+	usbc0: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbc0_int>;
+		vbus-supply = <&typec_vin>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			power-role = "dual";
+			try-power-role = "sink";
+			op-sink-microwatt = <1000000>;
+			sink-pdos =
+				<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
+			source-pdos =
+				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					usbc0_orien_sw: endpoint {
+						remote-endpoint = <&usbdp_phy0_orientation_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					usbc0_role_sw: endpoint {
+						remote-endpoint = <&dwc3_0_role_switch>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					dp_altmode_mux: endpoint {
+						remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c8m4_xfer {
+	rockchip,pins =
+		/* i2c8_scl_m4 */
+		<3 RK_PC2 9 &pcfg_pull_up_drv_level_6>,
+		/* i2c8_sda_m4 */
+		<3 RK_PC3 9 &pcfg_pull_up_drv_level_6>;
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&package_thermal {
+	polling-delay = <1000>;
+
+	trips {
+		package_fan0: package-fan0 {
+			hysteresis = <2000>;
+			temperature = <50000>;
+			type = "active";
+		};
+
+		package_fan1: package-fan1 {
+			hysteresis = <2000>;
+			temperature = <65000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			cooling-device = <&fan0 THERMAL_NO_LIMIT 1>;
+			trip = <&package_fan0>;
+		};
+		map1 {
+			cooling-device = <&fan0 2 THERMAL_NO_LIMIT>;
+			trip = <&package_fan1>;
+		};
+	};
+};
+
+/* M.2 E-key */
+&pcie2x1l0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x1_0_perstn_m1_l>;
+	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_ekey>;
+	status = "okay";
+};
+
+/* RTL8125B_1 */
+&pcie2x1l1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x1_1_perstn>;
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_lan>;
+	status = "okay";
+};
+
+/* RTL8125B_2 */
+&pcie2x1l2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie20x1_2_perstn>;
+	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_lan_phy2>;
+	status = "okay";
+};
+
+&pcie30phy {
+	data-lanes = <1 1 2 2>;
+	/* separate clock lines from the clock generator to phy and devices */
+	rockchip,rx-common-refclk-mode = <0 0 0 0>;
+	status = "okay";
+};
+
+/* ASMedia ASM1164 Sata controller */
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x2_perstn_m1_l>;
+	reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc33_io64>;
+	status = "okay";
+};
+
+/* M.2 M.key */
+&pcie3x4 {
+	num-lanes = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x4_perstn_m1_l>;
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_mkey>;
+	status = "okay";
+};
+
+&pwm14 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm14m1_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&avcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&sdmmc {
+	max-frequency = <200000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
+	status = "okay";
+};
+
+/* M.2 E-KEY */
+&sdio {
+	broken-cd;
+	bus-width = <4>;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	max-frequency = <150000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	no-sd;
+	no-mmc;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdiom0_pins>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_ekey>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspim2_pins>;
+	status = "okay";
+
+	spi_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	num-cs = <1>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		spi-max-frequency = <1000000>;
+		reg = <0x0>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <837500>;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+/* Connected to M.2 E-key */
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	/* connected to USB3 hub, which is powered by vcc5v0_usb12 */
+	phy-supply = <&vcc5v0_usb12>;
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	/* connected to USB2 hub, which is powered by vcc5v0_usb20 */
+	phy-supply = <&vcc5v0_usb20>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_usb20>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dwc3_0_role_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_role_sw>;
+		};
+	};
+};
+
+&usb_host1_xhci {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb5e3,610";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		vdd-supply = <&vcc5v0_usb12>;
+	};
+
+	/* 3.0 hub on port 4 */
+	hub_3_0: hub@2 {
+		compatible = "usb5e3,620";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gl3523_reset>;
+		reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc5v0_usb12>;
+	};
+};
+
+&usbdp_phy0 {
+	mode-switch;
+	orientation-switch;
+	sbu1-dc-gpios = <&gpio4 RK_PB7 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		usbdp_phy0_orientation_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_orien_sw>;
+		};
+
+		usbdp_phy0_dp_altmode_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&dp_altmode_mux>;
+		};
+	};
+};
+
+&usbdp_phy1 {
+	rockchip,dp-lane-mux = <2 3>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led_pins: led-pins {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>,
+					<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie20x1_2_perstn: pcie20x1-2-perstn {
+			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie30x1_0_perstn_m1_l: pcie30x1-0-perstn-m1-l {
+			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie30x1_1_perstn: pcie30x1-1-perstn {
+			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie30x2_perstn_m1_l: pcie30x2-perstn-m1-l {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie30x4_perstn_m1_l: pcie30x4-perstn-m1-l {
+			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		ekey_en: ekey-en {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		pcie30x4_pwren_h: pcie30x4-pwren-h {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sound {
+		hp_detect: hp-detect {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	usb {
+		usb_host_pwren_h: usb-host-pwren-h {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_otg_en: vcc5v0-otg-en {
+			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		gl3523_reset: rl3523-reset {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		usbc0_int: usbc0-int {
+			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vbus5v0_typec_en: vbus5v0-typec-en {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hdmirx {
+		hdmirx_det: hdmirx-det {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wireless-wlan {
+		wifi_host_wake_irq: wifi-host-wake-irq {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	dp {
+		dp1_hpd: dp1-hpd {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};