Message ID | 20240705021110.2495344-3-sunyeal.hong@samsung.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | [1/5] dt-bindings: clock: add Exynos Auto v920 SoC CMU bindings | expand |
Hi Sunyeal, On 7/5/24 11:11, Sunyeal Hong wrote: > Add device tree clock binding definitions for below CMU blocks. > > - CMU_TOP > - CMU_PERIC0 > > Signed-off-by: Sunyeal Hong <sunyeal.hong@samsung.com> > --- > .../clock/samsung,exynosautov920.h | 191 ++++++++++++++++++ > 1 file changed, 191 insertions(+) > create mode 100644 include/dt-bindings/clock/samsung,exynosautov920.h > > diff --git a/include/dt-bindings/clock/samsung,exynosautov920.h b/include/dt-bindings/clock/samsung,exynosautov920.h > new file mode 100644 > index 000000000000..bbddf7583e61 > --- /dev/null > +++ b/include/dt-bindings/clock/samsung,exynosautov920.h > @@ -0,0 +1,191 @@ > +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ > +/* > + * Copyright (c) 2024 Samsung Electronics Co., Ltd. > + * Author: Sunyeal Hong <sunyeal.hong@samsung.com> > + * > + * Device Tree binding constants for Exynos Auto V209 clock controller. Typo : V209 -> V920 Thanks Jaewon Kim
On 05/07/2024 04:11, Sunyeal Hong wrote: > Add device tree clock binding definitions for below CMU blocks. > > - CMU_TOP > - CMU_PERIC0 > > Signed-off-by: Sunyeal Hong <sunyeal.hong@samsung.com> Headers are part of bindings patch. <form letter> Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC. It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel. Tools like b4 or scripts/get_maintainer.pl provide you proper list of people, so fix your workflow. Tools might also fail if you work on some ancient tree (don't, instead use mainline) or work on fork of kernel (don't, instead use mainline). Just use b4 and everything should be fine, although remember about `b4 prep --auto-to-cc` if you added new patches to the patchset. You missed at least devicetree list (maybe more), so this won't be tested by automated tooling. Performing review on untested code might be a waste of time. Please kindly resend and include all necessary To/Cc entries. </form letter> Best regards, Krzysztof
Hello Jaewon, > -----Original Message----- > From: Jaewon Kim <jaewon02.kim@samsung.com> > Sent: Friday, July 5, 2024 12:08 PM > To: Sunyeal Hong <sunyeal.hong@samsung.com>; Krzysztof Kozlowski > <krzk@kernel.org>; Sylwester Nawrocki <s.nawrocki@samsung.com>; Chanwoo > Choi <cw00.choi@samsung.com>; Alim Akhtar <alim.akhtar@samsung.com>; > Michael Turquette <mturquette@baylibre.com>; Stephen Boyd > <sboyd@kernel.org> > Cc: linux-samsung-soc@vger.kernel.org; linux-clk@vger.kernel.org; linux- > kernel@vger.kernel.org > Subject: Re: [PATCH 2/5] dt-bindings: clock: add clock binding definitions > for Exynos Auto v920 > > Hi Sunyeal, > > > On 7/5/24 11:11, Sunyeal Hong wrote: > > Add device tree clock binding definitions for below CMU blocks. > > > > - CMU_TOP > > - CMU_PERIC0 > > > > Signed-off-by: Sunyeal Hong <sunyeal.hong@samsung.com> > > --- > > .../clock/samsung,exynosautov920.h | 191 ++++++++++++++++++ > > 1 file changed, 191 insertions(+) > > create mode 100644 include/dt-bindings/clock/samsung,exynosautov920.h > > > > diff --git a/include/dt-bindings/clock/samsung,exynosautov920.h > b/include/dt-bindings/clock/samsung,exynosautov920.h > > new file mode 100644 > > index 000000000000..bbddf7583e61 > > --- /dev/null > > +++ b/include/dt-bindings/clock/samsung,exynosautov920.h > > @@ -0,0 +1,191 @@ > > +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ > > +/* > > + * Copyright (c) 2024 Samsung Electronics Co., Ltd. > > + * Author: Sunyeal Hong <sunyeal.hong@samsung.com> > > + * > > + * Device Tree binding constants for Exynos Auto V209 clock controller. > > Typo : V209 -> V920 > > > Thanks > > Jaewon Kim > There was a typo for the SoC name. I will revise it as you mentioned. Thank you. Sunyeal Hong
Hello Krzysztof Kozlowski, > -----Original Message----- > From: Krzysztof Kozlowski <krzk@kernel.org> > Sent: Friday, July 5, 2024 3:03 PM > To: Sunyeal Hong <sunyeal.hong@samsung.com>; Sylwester Nawrocki > <s.nawrocki@samsung.com>; Chanwoo Choi <cw00.choi@samsung.com>; Alim > Akhtar <alim.akhtar@samsung.com>; Michael Turquette > <mturquette@baylibre.com>; Stephen Boyd <sboyd@kernel.org> > Cc: linux-samsung-soc@vger.kernel.org; linux-clk@vger.kernel.org; linux- > kernel@vger.kernel.org > Subject: Re: [PATCH 2/5] dt-bindings: clock: add clock binding definitions > for Exynos Auto v920 > > On 05/07/2024 04:11, Sunyeal Hong wrote: > > Add device tree clock binding definitions for below CMU blocks. > > > > - CMU_TOP > > - CMU_PERIC0 > > > > Signed-off-by: Sunyeal Hong <sunyeal.hong@samsung.com> > > Headers are part of bindings patch. > Is your request to combine PATCH 0 and 1 correct? If correct, I will update it as requested. > <form letter> > Please use scripts/get_maintainers.pl to get a list of necessary people > and lists to CC. It might happen, that command when run on an older kernel, > gives you outdated entries. Therefore please be sure you base your patches > on recent Linux kernel. > > Tools like b4 or scripts/get_maintainer.pl provide you proper list of > people, so fix your workflow. Tools might also fail if you work on some > ancient tree (don't, instead use mainline) or work on fork of kernel > (don't, instead use mainline). Just use b4 and everything should be fine, > although remember about `b4 prep --auto-to-cc` if you added new patches to > the patchset. > > You missed at least devicetree list (maybe more), so this won't be tested > by automated tooling. Performing review on untested code might be a waste > of time. > > Please kindly resend and include all necessary To/Cc entries. > </form letter> > > Best regards, > Krzysztof The mail list was created using get_maintainer.pl. If there is any problem, please let me know. ./scripts/get_maintainer.pl -f drivers/clk/samsung/ Krzysztof Kozlowski <krzk@kernel.org> (maintainer:SAMSUNG SOC CLOCK DRIVERS) Sylwester Nawrocki <s.nawrocki@samsung.com> (maintainer:SAMSUNG SOC CLOCK DRIVERS) Chanwoo Choi <cw00.choi@samsung.com> (maintainer:SAMSUNG SOC CLOCK DRIVERS) Alim Akhtar <alim.akhtar@samsung.com> (reviewer:SAMSUNG SOC CLOCK DRIVERS) Michael Turquette <mturquette@baylibre.com> (maintainer:COMMON CLK FRAMEWORK) Stephen Boyd <sboyd@kernel.org> (maintainer:COMMON CLK FRAMEWORK) linux-samsung-soc@vger.kernel.org (open list:SAMSUNG SOC CLOCK DRIVERS) linux-clk@vger.kernel.org (open list:COMMON CLK FRAMEWORK) linux-kernel@vger.kernel.org (open list) Thanks, Sunyeal Hong
On 05/07/2024 10:03, sunyeal.hong wrote: > >> <form letter> >> Please use scripts/get_maintainers.pl to get a list of necessary people >> and lists to CC. It might happen, that command when run on an older kernel, >> gives you outdated entries. Therefore please be sure you base your patches >> on recent Linux kernel. >> >> Tools like b4 or scripts/get_maintainer.pl provide you proper list of >> people, so fix your workflow. Tools might also fail if you work on some >> ancient tree (don't, instead use mainline) or work on fork of kernel >> (don't, instead use mainline). Just use b4 and everything should be fine, >> although remember about `b4 prep --auto-to-cc` if you added new patches to >> the patchset. >> >> You missed at least devicetree list (maybe more), so this won't be tested >> by automated tooling. Performing review on untested code might be a waste >> of time. >> >> Please kindly resend and include all necessary To/Cc entries. >> </form letter> >> >> Best regards, >> Krzysztof > > The mail list was created using get_maintainer.pl. If there is any problem, please let me know. > > ./scripts/get_maintainer.pl -f drivers/clk/samsung/ That's not how you run the command. You ALWAYS (unless you are Linus) run it on the patches. ALWAYS. See submitting patches or numerous presentations how to contribute upstream. Read my form letter accurately, e.g. switch to b4. Best regards, Krzysztof
Hello Krzysztof Kozlowski, > -----Original Message----- > From: Krzysztof Kozlowski <krzk@kernel.org> > Sent: Friday, July 5, 2024 5:52 PM > To: sunyeal.hong <sunyeal.hong@samsung.com>; 'Sylwester Nawrocki' > <s.nawrocki@samsung.com>; 'Chanwoo Choi' <cw00.choi@samsung.com>; 'Alim > Akhtar' <alim.akhtar@samsung.com>; 'Michael Turquette' > <mturquette@baylibre.com>; 'Stephen Boyd' <sboyd@kernel.org> > Cc: linux-samsung-soc@vger.kernel.org; linux-clk@vger.kernel.org; linux- > kernel@vger.kernel.org > Subject: Re: [PATCH 2/5] dt-bindings: clock: add clock binding definitions > for Exynos Auto v920 > > On 05/07/2024 10:03, sunyeal.hong wrote: > > > >> <form letter> > >> Please use scripts/get_maintainers.pl to get a list of necessary > >> people and lists to CC. It might happen, that command when run on an > >> older kernel, gives you outdated entries. Therefore please be sure > >> you base your patches on recent Linux kernel. > >> > >> Tools like b4 or scripts/get_maintainer.pl provide you proper list of > >> people, so fix your workflow. Tools might also fail if you work on > >> some ancient tree (don't, instead use mainline) or work on fork of > >> kernel (don't, instead use mainline). Just use b4 and everything > >> should be fine, although remember about `b4 prep --auto-to-cc` if you > >> added new patches to the patchset. > >> > >> You missed at least devicetree list (maybe more), so this won't be > >> tested by automated tooling. Performing review on untested code might > >> be a waste of time. > >> > >> Please kindly resend and include all necessary To/Cc entries. > >> </form letter> > >> > >> Best regards, > >> Krzysztof > > > > The mail list was created using get_maintainer.pl. If there is any > problem, please let me know. > > > > ./scripts/get_maintainer.pl -f drivers/clk/samsung/ > > That's not how you run the command. You ALWAYS (unless you are Linus) run > it on the patches. ALWAYS. See submitting patches or numerous > presentations how to contribute upstream. > > Read my form letter accurately, e.g. switch to b4. > > Best regards, > Krzysztof Thank you for your quick and kind response. I checked the difference in the mail list through "./scripts/get_maintainer.pl *.patch" and will reflect this. Could you please answer additional questions I asked? "Is your request to combine PATCH 0 and 1 correct? If correct, I will update it as requested." The reason I'm asking this is that if you check checkpatch.pl, it says to classify patches as follows. "DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst" PATCH0: Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml PATCH1: include/dt-bindings/clock/samsung,exynosautov920.h Thanks, Sunyeal Hong
On 05/07/2024 11:08, sunyeal.hong wrote: > Hello Krzysztof Kozlowski, > >> -----Original Message----- >> From: Krzysztof Kozlowski <krzk@kernel.org> >> Sent: Friday, July 5, 2024 5:52 PM >> To: sunyeal.hong <sunyeal.hong@samsung.com>; 'Sylwester Nawrocki' >> <s.nawrocki@samsung.com>; 'Chanwoo Choi' <cw00.choi@samsung.com>; 'Alim >> Akhtar' <alim.akhtar@samsung.com>; 'Michael Turquette' >> <mturquette@baylibre.com>; 'Stephen Boyd' <sboyd@kernel.org> >> Cc: linux-samsung-soc@vger.kernel.org; linux-clk@vger.kernel.org; linux- >> kernel@vger.kernel.org >> Subject: Re: [PATCH 2/5] dt-bindings: clock: add clock binding definitions >> for Exynos Auto v920 >> >> On 05/07/2024 10:03, sunyeal.hong wrote: >>> >>>> <form letter> >>>> Please use scripts/get_maintainers.pl to get a list of necessary >>>> people and lists to CC. It might happen, that command when run on an >>>> older kernel, gives you outdated entries. Therefore please be sure >>>> you base your patches on recent Linux kernel. >>>> >>>> Tools like b4 or scripts/get_maintainer.pl provide you proper list of >>>> people, so fix your workflow. Tools might also fail if you work on >>>> some ancient tree (don't, instead use mainline) or work on fork of >>>> kernel (don't, instead use mainline). Just use b4 and everything >>>> should be fine, although remember about `b4 prep --auto-to-cc` if you >>>> added new patches to the patchset. >>>> >>>> You missed at least devicetree list (maybe more), so this won't be >>>> tested by automated tooling. Performing review on untested code might >>>> be a waste of time. >>>> >>>> Please kindly resend and include all necessary To/Cc entries. >>>> </form letter> >>>> >>>> Best regards, >>>> Krzysztof >>> >>> The mail list was created using get_maintainer.pl. If there is any >> problem, please let me know. >>> >>> ./scripts/get_maintainer.pl -f drivers/clk/samsung/ >> >> That's not how you run the command. You ALWAYS (unless you are Linus) run >> it on the patches. ALWAYS. See submitting patches or numerous >> presentations how to contribute upstream. >> >> Read my form letter accurately, e.g. switch to b4. >> >> Best regards, >> Krzysztof > > Thank you for your quick and kind response. > I checked the difference in the mail list through "./scripts/get_maintainer.pl *.patch" and will reflect this. > > Could you please answer additional questions I asked? > "Is your request to combine PATCH 0 and 1 correct? If correct, I will update it as requested." > > The reason I'm asking this is that if you check checkpatch.pl, it says to classify patches as follows. > "DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst" > PATCH0: Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml > PATCH1: include/dt-bindings/clock/samsung,exynosautov920.h Separate from the drivers, not from each other! This does not make sense to keep them separate. Of course they must be squashed, I asked this in the first comment. Best regards, Krzysztof
Hello Krzysztof Kozlowski, > -----Original Message----- > From: Krzysztof Kozlowski <krzk@kernel.org> > Sent: Friday, July 5, 2024 6:13 PM > To: sunyeal.hong <sunyeal.hong@samsung.com>; 'Sylwester Nawrocki' > <s.nawrocki@samsung.com>; 'Chanwoo Choi' <cw00.choi@samsung.com>; 'Alim > Akhtar' <alim.akhtar@samsung.com>; 'Michael Turquette' > <mturquette@baylibre.com>; 'Stephen Boyd' <sboyd@kernel.org> > Cc: linux-samsung-soc@vger.kernel.org; linux-clk@vger.kernel.org; linux- > kernel@vger.kernel.org > Subject: Re: [PATCH 2/5] dt-bindings: clock: add clock binding definitions > for Exynos Auto v920 > > On 05/07/2024 11:08, sunyeal.hong wrote: > > Hello Krzysztof Kozlowski, > > > >> -----Original Message----- > >> From: Krzysztof Kozlowski <krzk@kernel.org> > >> Sent: Friday, July 5, 2024 5:52 PM > >> To: sunyeal.hong <sunyeal.hong@samsung.com>; 'Sylwester Nawrocki' > >> <s.nawrocki@samsung.com>; 'Chanwoo Choi' <cw00.choi@samsung.com>; > >> 'Alim Akhtar' <alim.akhtar@samsung.com>; 'Michael Turquette' > >> <mturquette@baylibre.com>; 'Stephen Boyd' <sboyd@kernel.org> > >> Cc: linux-samsung-soc@vger.kernel.org; linux-clk@vger.kernel.org; > >> linux- kernel@vger.kernel.org > >> Subject: Re: [PATCH 2/5] dt-bindings: clock: add clock binding > >> definitions for Exynos Auto v920 > >> > >> On 05/07/2024 10:03, sunyeal.hong wrote: > >>> > >>>> <form letter> > >>>> Please use scripts/get_maintainers.pl to get a list of necessary > >>>> people and lists to CC. It might happen, that command when run on > >>>> an older kernel, gives you outdated entries. Therefore please be > >>>> sure you base your patches on recent Linux kernel. > >>>> > >>>> Tools like b4 or scripts/get_maintainer.pl provide you proper list > >>>> of people, so fix your workflow. Tools might also fail if you work > >>>> on some ancient tree (don't, instead use mainline) or work on fork > >>>> of kernel (don't, instead use mainline). Just use b4 and everything > >>>> should be fine, although remember about `b4 prep --auto-to-cc` if > >>>> you added new patches to the patchset. > >>>> > >>>> You missed at least devicetree list (maybe more), so this won't be > >>>> tested by automated tooling. Performing review on untested code > >>>> might be a waste of time. > >>>> > >>>> Please kindly resend and include all necessary To/Cc entries. > >>>> </form letter> > >>>> > >>>> Best regards, > >>>> Krzysztof > >>> > >>> The mail list was created using get_maintainer.pl. If there is any > >> problem, please let me know. > >>> > >>> ./scripts/get_maintainer.pl -f drivers/clk/samsung/ > >> > >> That's not how you run the command. You ALWAYS (unless you are Linus) > >> run it on the patches. ALWAYS. See submitting patches or numerous > >> presentations how to contribute upstream. > >> > >> Read my form letter accurately, e.g. switch to b4. > >> > >> Best regards, > >> Krzysztof > > > > Thank you for your quick and kind response. > > I checked the difference in the mail list through > "./scripts/get_maintainer.pl *.patch" and will reflect this. > > > > Could you please answer additional questions I asked? > > "Is your request to combine PATCH 0 and 1 correct? If correct, I will > update it as requested." > > > > The reason I'm asking this is that if you check checkpatch.pl, it says > to classify patches as follows. > > "DT binding docs and includes should be a separate patch. See: > Documentation/devicetree/bindings/submitting-patches.rst" > > PATCH0: > > Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.y > > aml > > PATCH1: include/dt-bindings/clock/samsung,exynosautov920.h > > Separate from the drivers, not from each other! This does not make sense > to keep them separate. > > Of course they must be squashed, I asked this in the first comment. > > Best regards, > Krzysztof > Okay. I understand your comment. I will revise it and upload it again. Thanks, Sunyeal Hong
diff --git a/include/dt-bindings/clock/samsung,exynosautov920.h b/include/dt-bindings/clock/samsung,exynosautov920.h new file mode 100644 index 000000000000..bbddf7583e61 --- /dev/null +++ b/include/dt-bindings/clock/samsung,exynosautov920.h @@ -0,0 +1,191 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2024 Samsung Electronics Co., Ltd. + * Author: Sunyeal Hong <sunyeal.hong@samsung.com> + * + * Device Tree binding constants for Exynos Auto V209 clock controller. + */ + +#ifndef _DT_BINDINGS_CLOCK_EXYNOSAUTOV920_H +#define _DT_BINDINGS_CLOCK_EXYNOSAUTOV920_H + +/* CMU_TOP */ +#define FOUT_SHARED0_PLL 1 +#define FOUT_SHARED1_PLL 2 +#define FOUT_SHARED2_PLL 3 +#define FOUT_SHARED3_PLL 4 +#define FOUT_SHARED4_PLL 5 +#define FOUT_SHARED5_PLL 6 +#define FOUT_MMC_PLL 7 + +/* MUX in CMU_TOP */ +#define MOUT_SHARED0_PLL 101 +#define MOUT_SHARED1_PLL 102 +#define MOUT_SHARED2_PLL 103 +#define MOUT_SHARED3_PLL 104 +#define MOUT_SHARED4_PLL 105 +#define MOUT_SHARED5_PLL 106 +#define MOUT_MMC_PLL 107 +#define MOUT_CLKCMU_CMU_BOOST 108 +#define MOUT_CLKCMU_CMU_CMUREF 109 +#define MOUT_CLKCMU_ACC_NOC 110 +#define MOUT_CLKCMU_ACC_ORB 111 +#define MOUT_CLKCMU_APM_NOC 112 +#define MOUT_CLKCMU_AUD_CPU 113 +#define MOUT_CLKCMU_AUD_NOC 114 +#define MOUT_CLKCMU_CPUCL0_SWITCH 115 +#define MOUT_CLKCMU_CPUCL0_CLUSTER 116 +#define MOUT_CLKCMU_CPUCL0_DBG 117 +#define MOUT_CLKCMU_CPUCL1_SWITCH 118 +#define MOUT_CLKCMU_CPUCL1_CLUSTER 119 +#define MOUT_CLKCMU_CPUCL2_SWITCH 120 +#define MOUT_CLKCMU_CPUCL2_CLUSTER 121 +#define MOUT_CLKCMU_DNC_NOC 122 +#define MOUT_CLKCMU_DPTX_NOC 123 +#define MOUT_CLKCMU_DPTX_DPGTC 124 +#define MOUT_CLKCMU_DPTX_DPOSC 125 +#define MOUT_CLKCMU_DPUB_NOC 126 +#define MOUT_CLKCMU_DPUB_DSIM 127 +#define MOUT_CLKCMU_DPUF0_NOC 128 +#define MOUT_CLKCMU_DPUF1_NOC 129 +#define MOUT_CLKCMU_DPUF2_NOC 130 +#define MOUT_CLKCMU_DSP_NOC 131 +#define MOUT_CLKCMU_G3D_SWITCH 132 +#define MOUT_CLKCMU_G3D_NOCP 133 +#define MOUT_CLKCMU_GNPU_NOC 134 +#define MOUT_CLKCMU_HSI0_NOC 135 +#define MOUT_CLKCMU_HSI1_NOC 136 +#define MOUT_CLKCMU_HSI1_USBDRD 137 +#define MOUT_CLKCMU_HSI1_MMC_CARD 138 +#define MOUT_CLKCMU_HSI2_NOC 139 +#define MOUT_CLKCMU_HSI2_NOC_UFS 140 +#define MOUT_CLKCMU_HSI2_UFS_EMBD 141 +#define MOUT_CLKCMU_HSI2_ETHERNET 142 +#define MOUT_CLKCMU_ISP_NOC 143 +#define MOUT_CLKCMU_M2M_NOC 144 +#define MOUT_CLKCMU_M2M_JPEG 145 +#define MOUT_CLKCMU_MFC_MFC 146 +#define MOUT_CLKCMU_MFC_WFD 147 +#define MOUT_CLKCMU_MFD_NOC 148 +#define MOUT_CLKCMU_MIF_SWITCH 149 +#define MOUT_CLKCMU_MIF_NOCP 150 +#define MOUT_CLKCMU_MISC_NOC 151 +#define MOUT_CLKCMU_NOCL0_NOC 152 +#define MOUT_CLKCMU_NOCL1_NOC 153 +#define MOUT_CLKCMU_NOCL2_NOC 154 +#define MOUT_CLKCMU_PERIC0_NOC 155 +#define MOUT_CLKCMU_PERIC0_IP 156 +#define MOUT_CLKCMU_PERIC1_NOC 157 +#define MOUT_CLKCMU_PERIC1_IP 158 +#define MOUT_CLKCMU_SDMA_NOC 159 +#define MOUT_CLKCMU_SNW_NOC 160 +#define MOUT_CLKCMU_SSP_NOC 161 +#define MOUT_CLKCMU_TAA_NOC 162 + +/* DIV in CMU_TOP */ +#define DOUT_SHARED0_DIV1 201 +#define DOUT_SHARED0_DIV2 202 +#define DOUT_SHARED0_DIV3 203 +#define DOUT_SHARED0_DIV4 204 +#define DOUT_SHARED1_DIV1 205 +#define DOUT_SHARED1_DIV2 206 +#define DOUT_SHARED1_DIV3 207 +#define DOUT_SHARED1_DIV4 208 +#define DOUT_SHARED2_DIV1 209 +#define DOUT_SHARED2_DIV2 210 +#define DOUT_SHARED2_DIV3 211 +#define DOUT_SHARED2_DIV4 212 +#define DOUT_SHARED3_DIV1 213 +#define DOUT_SHARED3_DIV2 214 +#define DOUT_SHARED3_DIV3 215 +#define DOUT_SHARED3_DIV4 216 +#define DOUT_SHARED4_DIV1 217 +#define DOUT_SHARED4_DIV2 218 +#define DOUT_SHARED4_DIV3 219 +#define DOUT_SHARED4_DIV4 220 +#define DOUT_SHARED5_DIV1 221 +#define DOUT_SHARED5_DIV2 222 +#define DOUT_SHARED5_DIV3 223 +#define DOUT_SHARED5_DIV4 224 +#define DOUT_CLKCMU_CMU_BOOST 225 +#define DOUT_CLKCMU_ACC_NOC 226 +#define DOUT_CLKCMU_ACC_ORB 227 +#define DOUT_CLKCMU_APM_NOC 228 +#define DOUT_CLKCMU_AUD_CPU 229 +#define DOUT_CLKCMU_AUD_NOC 230 +#define DOUT_CLKCMU_CPUCL0_SWITCH 231 +#define DOUT_CLKCMU_CPUCL0_CLUSTER 232 +#define DOUT_CLKCMU_CPUCL0_DBG 233 +#define DOUT_CLKCMU_CPUCL1_SWITCH 234 +#define DOUT_CLKCMU_CPUCL1_CLUSTER 235 +#define DOUT_CLKCMU_CPUCL2_SWITCH 236 +#define DOUT_CLKCMU_CPUCL2_CLUSTER 237 +#define DOUT_CLKCMU_DNC_NOC 238 +#define DOUT_CLKCMU_DPTX_NOC 239 +#define DOUT_CLKCMU_DPTX_DPGTC 240 +#define DOUT_CLKCMU_DPTX_DPOSC 241 +#define DOUT_CLKCMU_DPUB_NOC 242 +#define DOUT_CLKCMU_DPUB_DSIM 243 +#define DOUT_CLKCMU_DPUF0_NOC 244 +#define DOUT_CLKCMU_DPUF1_NOC 245 +#define DOUT_CLKCMU_DPUF2_NOC 246 +#define DOUT_CLKCMU_DSP_NOC 247 +#define DOUT_CLKCMU_G3D_SWITCH 248 +#define DOUT_CLKCMU_G3D_NOCP 249 +#define DOUT_CLKCMU_GNPU_NOC 250 +#define DOUT_CLKCMU_HSI0_NOC 251 +#define DOUT_CLKCMU_HSI1_NOC 252 +#define DOUT_CLKCMU_HSI1_USBDRD 253 +#define DOUT_CLKCMU_HSI1_MMC_CARD 254 +#define DOUT_CLKCMU_HSI2_NOC 255 +#define DOUT_CLKCMU_HSI2_NOC_UFS 256 +#define DOUT_CLKCMU_HSI2_UFS_EMBD 257 +#define DOUT_CLKCMU_HSI2_ETHERNET 258 +#define DOUT_CLKCMU_ISP_NOC 259 +#define DOUT_CLKCMU_M2M_NOC 260 +#define DOUT_CLKCMU_M2M_JPEG 261 +#define DOUT_CLKCMU_MFC_MFC 262 +#define DOUT_CLKCMU_MFC_WFD 263 +#define DOUT_CLKCMU_MFD_NOC 264 +#define DOUT_CLKCMU_MIF_NOCP 265 +#define DOUT_CLKCMU_MISC_NOC 266 +#define DOUT_CLKCMU_NOCL0_NOC 267 +#define DOUT_CLKCMU_NOCL1_NOC 268 +#define DOUT_CLKCMU_NOCL2_NOC 269 +#define DOUT_CLKCMU_PERIC0_NOC 270 +#define DOUT_CLKCMU_PERIC0_IP 271 +#define DOUT_CLKCMU_PERIC1_NOC 272 +#define DOUT_CLKCMU_PERIC1_IP 273 +#define DOUT_CLKCMU_SDMA_NOC 274 +#define DOUT_CLKCMU_SNW_NOC 275 +#define DOUT_CLKCMU_SSP_NOC 276 +#define DOUT_CLKCMU_TAA_NOC 277 + +/* CMU_PERIC0 */ +#define CLK_MOUT_PERIC0_IP_USER 1 +#define CLK_MOUT_PERIC0_NOC_USER 2 +#define CLK_MOUT_PERIC0_USI00_USI 3 +#define CLK_MOUT_PERIC0_USI01_USI 4 +#define CLK_MOUT_PERIC0_USI02_USI 5 +#define CLK_MOUT_PERIC0_USI03_USI 6 +#define CLK_MOUT_PERIC0_USI04_USI 7 +#define CLK_MOUT_PERIC0_USI05_USI 8 +#define CLK_MOUT_PERIC0_USI06_USI 9 +#define CLK_MOUT_PERIC0_USI07_USI 10 +#define CLK_MOUT_PERIC0_USI08_USI 11 +#define CLK_MOUT_PERIC0_USI_I2C 12 +#define CLK_MOUT_PERIC0_I3C 13 + +#define CLK_DOUT_PERIC0_USI00_USI 14 +#define CLK_DOUT_PERIC0_USI01_USI 15 +#define CLK_DOUT_PERIC0_USI02_USI 16 +#define CLK_DOUT_PERIC0_USI03_USI 17 +#define CLK_DOUT_PERIC0_USI04_USI 18 +#define CLK_DOUT_PERIC0_USI05_USI 19 +#define CLK_DOUT_PERIC0_USI06_USI 20 +#define CLK_DOUT_PERIC0_USI07_USI 21 +#define CLK_DOUT_PERIC0_USI08_USI 22 +#define CLK_DOUT_PERIC0_USI_I2C 23 +#define CLK_DOUT_PERIC0_I3C 24 + +#endif /* _DT_BINDINGS_CLOCK_EXYNOSAUTOV920_H */
Add device tree clock binding definitions for below CMU blocks. - CMU_TOP - CMU_PERIC0 Signed-off-by: Sunyeal Hong <sunyeal.hong@samsung.com> --- .../clock/samsung,exynosautov920.h | 191 ++++++++++++++++++ 1 file changed, 191 insertions(+) create mode 100644 include/dt-bindings/clock/samsung,exynosautov920.h