| Message ID | 20240705134647.3524969-3-ciprianmarian.costea@oss.nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | address several S32G2/S32G3 SoC based boards particularities | expand |
> -----Original Message----- > From: Ciprian Marian Costea (OSS) <ciprianmarian.costea@oss.nxp.com> > Sent: 2024年7月5日 21:47 > To: Bough Chen <haibo.chen@nxp.com>; Adrian Hunter > <adrian.hunter@intel.com>; Ulf Hansson <ulf.hansson@linaro.org>; Shawn Guo > <shawnguo@kernel.org>; Sascha Hauer <s.hauer@pengutronix.de>; > Pengutronix Kernel Team <kernel@pengutronix.de>; Fabio Estevam > <festevam@gmail.com> > Cc: linux-kernel@vger.kernel.org; linux-mmc@vger.kernel.org; > imx@lists.linux.dev; linux-arm-kernel@lists.infradead.org; dl-S32 > <S32@nxp.com>; Ciprian Marian Costea (OSS) > <ciprianmarian.costea@oss.nxp.com> > Subject: [PATCH 2/4] mmc: sdhci-esdhc-imx: obtain the 'per' clock rate after its > enablement > > The I.MX SDHCI driver assumes that the frequency of the 'per' clock can be > obtained even on disabled clocks, which is not always the case. > > According to 'clk_get_rate' documentation, it is only valid once the clock source > has been enabled. Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Thanks Haibo Chen > > Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com> > --- > drivers/mmc/host/sdhci-esdhc-imx.c | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c > b/drivers/mmc/host/sdhci-esdhc-imx.c > index 21d984a77be8..8f0bc6dca2b0 100644 > --- a/drivers/mmc/host/sdhci-esdhc-imx.c > +++ b/drivers/mmc/host/sdhci-esdhc-imx.c > @@ -1709,7 +1709,6 @@ static int sdhci_esdhc_imx_probe(struct > platform_device *pdev) > } > > pltfm_host->clk = imx_data->clk_per; > - pltfm_host->clock = clk_get_rate(pltfm_host->clk); > err = clk_prepare_enable(imx_data->clk_per); > if (err) > goto free_sdhci; > @@ -1720,6 +1719,13 @@ static int sdhci_esdhc_imx_probe(struct > platform_device *pdev) > if (err) > goto disable_ipg_clk; > > + pltfm_host->clock = clk_get_rate(pltfm_host->clk); > + if (!pltfm_host->clock) { > + dev_err(mmc_dev(host->mmc), "could not get clk rate\n"); > + err = -EINVAL; > + goto disable_ahb_clk; > + } > + > imx_data->pinctrl = devm_pinctrl_get(&pdev->dev); > if (IS_ERR(imx_data->pinctrl)) > dev_warn(mmc_dev(host->mmc), "could not get pinctrl\n"); > -- > 2.45.2
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 21d984a77be8..8f0bc6dca2b0 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -1709,7 +1709,6 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) } pltfm_host->clk = imx_data->clk_per; - pltfm_host->clock = clk_get_rate(pltfm_host->clk); err = clk_prepare_enable(imx_data->clk_per); if (err) goto free_sdhci; @@ -1720,6 +1719,13 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) if (err) goto disable_ipg_clk; + pltfm_host->clock = clk_get_rate(pltfm_host->clk); + if (!pltfm_host->clock) { + dev_err(mmc_dev(host->mmc), "could not get clk rate\n"); + err = -EINVAL; + goto disable_ahb_clk; + } + imx_data->pinctrl = devm_pinctrl_get(&pdev->dev); if (IS_ERR(imx_data->pinctrl)) dev_warn(mmc_dev(host->mmc), "could not get pinctrl\n");
The I.MX SDHCI driver assumes that the frequency of the 'per' clock can be obtained even on disabled clocks, which is not always the case. According to 'clk_get_rate' documentation, it is only valid once the clock source has been enabled. Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com> --- drivers/mmc/host/sdhci-esdhc-imx.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)