| Message ID | 20240621-imx95-bbm-misc-v2-v5-7-b85a6bf778cb@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | firmware: support i.MX95 SCMI BBM/MISC Extenstion | expand |
On Fri, Jun 21, 2024 at 03:04:42PM +0800, Peng Fan (OSS) wrote: > From: Peng Fan <peng.fan@nxp.com> > > The BBM module provides BUTTON feature. To i.MX95, this module > is managed by System Manager and exported using System Management > Control Interface(SCMI). Linux could use i.MX SCMI BBM Extension > protocol to use BUTTON feature. Hi Peng, one remarks down below. > > This driver is to use SCMI interface to enable pwrkey. > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > --- > drivers/input/keyboard/Kconfig | 11 ++ > drivers/input/keyboard/Makefile | 1 + > drivers/input/keyboard/imx-sm-bbm-key.c | 225 ++++++++++++++++++++++++++++++++ > 3 files changed, 237 insertions(+) > > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig > index 1d0c5f4c0f99..1c3fef7d34af 100644 > --- a/drivers/input/keyboard/Kconfig > +++ b/drivers/input/keyboard/Kconfig > @@ -466,6 +466,17 @@ config KEYBOARD_IMX > To compile this driver as a module, choose M here: the > module will be called imx_keypad. > > +config KEYBOARD_IMX_BBM_SCMI > + tristate "IMX BBM SCMI Key Driver" > + depends on IMX_SCMI_BBM_EXT || COMPILE_TEST > + default y if ARCH_MXC > + help > + This is the BBM key driver for NXP i.MX SoCs managed through > + SCMI protocol. > + > + To compile this driver as a module, choose M here: the > + module will be called scmi-imx-bbm-key. > + > config KEYBOARD_IMX_SC_KEY > tristate "IMX SCU Key Driver" > depends on IMX_SCU > diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile > index aecef00c5d09..624c90adde89 100644 > --- a/drivers/input/keyboard/Makefile > +++ b/drivers/input/keyboard/Makefile > @@ -31,6 +31,7 @@ obj-$(CONFIG_KEYBOARD_IPAQ_MICRO) += ipaq-micro-keys.o > obj-$(CONFIG_KEYBOARD_IQS62X) += iqs62x-keys.o > obj-$(CONFIG_KEYBOARD_IMX) += imx_keypad.o > obj-$(CONFIG_KEYBOARD_IMX_SC_KEY) += imx_sc_key.o > +obj-$(CONFIG_KEYBOARD_IMX_BBM_SCMI) += imx-sm-bbm-key.o > obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o > obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o > obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o > diff --git a/drivers/input/keyboard/imx-sm-bbm-key.c b/drivers/input/keyboard/imx-sm-bbm-key.c > new file mode 100644 > index 000000000000..907dad383b8f > --- /dev/null > +++ b/drivers/input/keyboard/imx-sm-bbm-key.c > @@ -0,0 +1,225 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2024 NXP. > + */ > + > +#include <linux/input.h> > +#include <linux/jiffies.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/platform_device.h> > +#include <linux/rtc.h> > +#include <linux/scmi_protocol.h> > +#include <linux/scmi_imx_protocol.h> > +#include <linux/suspend.h> > + > +#define DEBOUNCE_TIME 30 > +#define REPEAT_INTERVAL 60 > + > +struct scmi_imx_bbm { > + struct scmi_protocol_handle *ph; > + const struct scmi_imx_bbm_proto_ops *ops; > + struct notifier_block nb; > + int keycode; > + int keystate; /* 1:pressed */ > + bool suspended; > + struct delayed_work check_work; > + struct input_dev *input; > +}; > + > +static void scmi_imx_bbm_pwrkey_check_for_events(struct work_struct *work) > +{ > + struct scmi_imx_bbm *bbnsm = container_of(to_delayed_work(work), > + struct scmi_imx_bbm, check_work); > + struct scmi_protocol_handle *ph = bbnsm->ph; > + struct input_dev *input = bbnsm->input; > + u32 state = 0; > + int ret; > + > + ret = bbnsm->ops->button_get(ph, &state); > + if (ret) { > + pr_err("%s: %d\n", __func__, ret); > + return; > + } > + > + pr_debug("%s: state: %d, keystate %d\n", __func__, state, bbnsm->keystate); > + > + /* only report new event if status changed */ > + if (state ^ bbnsm->keystate) { > + bbnsm->keystate = state; > + input_event(input, EV_KEY, bbnsm->keycode, state); > + input_sync(input); > + pm_relax(bbnsm->input->dev.parent); > + pr_debug("EV_KEY: %x\n", bbnsm->keycode); > + } > + > + /* repeat check if pressed long */ > + if (state) > + schedule_delayed_work(&bbnsm->check_work, msecs_to_jiffies(REPEAT_INTERVAL)); > +} > + > +static int scmi_imx_bbm_pwrkey_event(struct scmi_imx_bbm *bbnsm) > +{ > + struct input_dev *input = bbnsm->input; > + > + pm_wakeup_event(input->dev.parent, 0); > + > + schedule_delayed_work(&bbnsm->check_work, msecs_to_jiffies(DEBOUNCE_TIME)); > + > + /* > + * Directly report key event after resume to make no key press > + * event is missed. > + */ > + if (READ_ONCE(bbnsm->suspended)) { > + bbnsm->keystate = 1; > + input_event(input, EV_KEY, bbnsm->keycode, 1); > + input_sync(input); > + WRITE_ONCE(bbnsm->suspended, false); > + } > + > + return 0; > +} > + > +static void scmi_imx_bbm_pwrkey_act(void *pdata) > +{ > + struct scmi_imx_bbm *bbnsm = pdata; > + > + cancel_delayed_work_sync(&bbnsm->check_work); > +} > + > +static int scmi_imx_bbm_key_notifier(struct notifier_block *nb, unsigned long event, void *data) > +{ > + struct scmi_imx_bbm *bbnsm = container_of(nb, struct scmi_imx_bbm, nb); > + struct scmi_imx_bbm_notif_report *r = data; > + > + if (r->is_button) { > + pr_debug("BBM Button Power key pressed\n"); > + scmi_imx_bbm_pwrkey_event(bbnsm); > + } else { > + /* Should never reach here */ > + pr_err("Unexpected BBM event: %s\n", __func__); > + } > + > + return 0; > +} > + > +static int scmi_imx_bbm_pwrkey_init(struct scmi_device *sdev) > +{ > + const struct scmi_handle *handle = sdev->handle; > + struct device *dev = &sdev->dev; > + struct scmi_imx_bbm *bbnsm = dev_get_drvdata(dev); > + struct input_dev *input; > + int ret; > + > + if (device_property_read_u32(dev, "linux,code", &bbnsm->keycode)) { > + bbnsm->keycode = KEY_POWER; > + dev_warn(dev, "key code is not specified, using default KEY_POWER\n"); > + } > + > + INIT_DELAYED_WORK(&bbnsm->check_work, scmi_imx_bbm_pwrkey_check_for_events); To stay on the safe side I would issue a cancel_delayed_work_sync() somewhere along the remove() path of this driver...just to be sure there is not an actively scheduled deleayed work queued while we are shutting down.....I maybe overly paranoic...but seems a safe thing to do O_o Thanks, Cristian
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 1d0c5f4c0f99..1c3fef7d34af 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -466,6 +466,17 @@ config KEYBOARD_IMX To compile this driver as a module, choose M here: the module will be called imx_keypad. +config KEYBOARD_IMX_BBM_SCMI + tristate "IMX BBM SCMI Key Driver" + depends on IMX_SCMI_BBM_EXT || COMPILE_TEST + default y if ARCH_MXC + help + This is the BBM key driver for NXP i.MX SoCs managed through + SCMI protocol. + + To compile this driver as a module, choose M here: the + module will be called scmi-imx-bbm-key. + config KEYBOARD_IMX_SC_KEY tristate "IMX SCU Key Driver" depends on IMX_SCU diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index aecef00c5d09..624c90adde89 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_KEYBOARD_IPAQ_MICRO) += ipaq-micro-keys.o obj-$(CONFIG_KEYBOARD_IQS62X) += iqs62x-keys.o obj-$(CONFIG_KEYBOARD_IMX) += imx_keypad.o obj-$(CONFIG_KEYBOARD_IMX_SC_KEY) += imx_sc_key.o +obj-$(CONFIG_KEYBOARD_IMX_BBM_SCMI) += imx-sm-bbm-key.o obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o diff --git a/drivers/input/keyboard/imx-sm-bbm-key.c b/drivers/input/keyboard/imx-sm-bbm-key.c new file mode 100644 index 000000000000..907dad383b8f --- /dev/null +++ b/drivers/input/keyboard/imx-sm-bbm-key.c @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2024 NXP. + */ + +#include <linux/input.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/rtc.h> +#include <linux/scmi_protocol.h> +#include <linux/scmi_imx_protocol.h> +#include <linux/suspend.h> + +#define DEBOUNCE_TIME 30 +#define REPEAT_INTERVAL 60 + +struct scmi_imx_bbm { + struct scmi_protocol_handle *ph; + const struct scmi_imx_bbm_proto_ops *ops; + struct notifier_block nb; + int keycode; + int keystate; /* 1:pressed */ + bool suspended; + struct delayed_work check_work; + struct input_dev *input; +}; + +static void scmi_imx_bbm_pwrkey_check_for_events(struct work_struct *work) +{ + struct scmi_imx_bbm *bbnsm = container_of(to_delayed_work(work), + struct scmi_imx_bbm, check_work); + struct scmi_protocol_handle *ph = bbnsm->ph; + struct input_dev *input = bbnsm->input; + u32 state = 0; + int ret; + + ret = bbnsm->ops->button_get(ph, &state); + if (ret) { + pr_err("%s: %d\n", __func__, ret); + return; + } + + pr_debug("%s: state: %d, keystate %d\n", __func__, state, bbnsm->keystate); + + /* only report new event if status changed */ + if (state ^ bbnsm->keystate) { + bbnsm->keystate = state; + input_event(input, EV_KEY, bbnsm->keycode, state); + input_sync(input); + pm_relax(bbnsm->input->dev.parent); + pr_debug("EV_KEY: %x\n", bbnsm->keycode); + } + + /* repeat check if pressed long */ + if (state) + schedule_delayed_work(&bbnsm->check_work, msecs_to_jiffies(REPEAT_INTERVAL)); +} + +static int scmi_imx_bbm_pwrkey_event(struct scmi_imx_bbm *bbnsm) +{ + struct input_dev *input = bbnsm->input; + + pm_wakeup_event(input->dev.parent, 0); + + schedule_delayed_work(&bbnsm->check_work, msecs_to_jiffies(DEBOUNCE_TIME)); + + /* + * Directly report key event after resume to make no key press + * event is missed. + */ + if (READ_ONCE(bbnsm->suspended)) { + bbnsm->keystate = 1; + input_event(input, EV_KEY, bbnsm->keycode, 1); + input_sync(input); + WRITE_ONCE(bbnsm->suspended, false); + } + + return 0; +} + +static void scmi_imx_bbm_pwrkey_act(void *pdata) +{ + struct scmi_imx_bbm *bbnsm = pdata; + + cancel_delayed_work_sync(&bbnsm->check_work); +} + +static int scmi_imx_bbm_key_notifier(struct notifier_block *nb, unsigned long event, void *data) +{ + struct scmi_imx_bbm *bbnsm = container_of(nb, struct scmi_imx_bbm, nb); + struct scmi_imx_bbm_notif_report *r = data; + + if (r->is_button) { + pr_debug("BBM Button Power key pressed\n"); + scmi_imx_bbm_pwrkey_event(bbnsm); + } else { + /* Should never reach here */ + pr_err("Unexpected BBM event: %s\n", __func__); + } + + return 0; +} + +static int scmi_imx_bbm_pwrkey_init(struct scmi_device *sdev) +{ + const struct scmi_handle *handle = sdev->handle; + struct device *dev = &sdev->dev; + struct scmi_imx_bbm *bbnsm = dev_get_drvdata(dev); + struct input_dev *input; + int ret; + + if (device_property_read_u32(dev, "linux,code", &bbnsm->keycode)) { + bbnsm->keycode = KEY_POWER; + dev_warn(dev, "key code is not specified, using default KEY_POWER\n"); + } + + INIT_DELAYED_WORK(&bbnsm->check_work, scmi_imx_bbm_pwrkey_check_for_events); + + input = devm_input_allocate_device(dev); + if (!input) { + dev_err(dev, "failed to allocate the input device for SCMI IMX BBM\n"); + return -ENOMEM; + } + + input->name = dev_name(dev); + input->phys = "bbnsm-pwrkey/input0"; + input->id.bustype = BUS_HOST; + + input_set_capability(input, EV_KEY, bbnsm->keycode); + + ret = devm_add_action_or_reset(dev, scmi_imx_bbm_pwrkey_act, bbnsm); + if (ret) { + dev_err(dev, "failed to register remove action\n"); + return ret; + } + + bbnsm->input = input; + + bbnsm->nb.notifier_call = &scmi_imx_bbm_key_notifier; + ret = handle->notify_ops->devm_event_notifier_register(sdev, SCMI_PROTOCOL_IMX_BBM, + SCMI_EVENT_IMX_BBM_BUTTON, + NULL, &bbnsm->nb); + + if (ret) + dev_err(dev, "Failed to register BBM Button Events %d:", ret); + + ret = input_register_device(input); + if (ret) { + dev_err(dev, "failed to register input device\n"); + return ret; + } + + return 0; +} + +static int scmi_imx_bbm_key_probe(struct scmi_device *sdev) +{ + const struct scmi_handle *handle = sdev->handle; + struct device *dev = &sdev->dev; + struct scmi_protocol_handle *ph; + struct scmi_imx_bbm *bbnsm; + int ret; + + if (!handle) + return -ENODEV; + + bbnsm = devm_kzalloc(dev, sizeof(*bbnsm), GFP_KERNEL); + if (!bbnsm) + return -ENOMEM; + + bbnsm->ops = handle->devm_protocol_get(sdev, SCMI_PROTOCOL_IMX_BBM, &ph); + if (IS_ERR(bbnsm->ops)) + return PTR_ERR(bbnsm->ops); + + bbnsm->ph = ph; + + device_init_wakeup(dev, true); + + dev_set_drvdata(dev, bbnsm); + + ret = scmi_imx_bbm_pwrkey_init(sdev); + if (ret) + device_init_wakeup(dev, false); + + return ret; +} + +static int __maybe_unused scmi_imx_bbm_key_suspend(struct device *dev) +{ + struct scmi_imx_bbm *bbnsm = dev_get_drvdata(dev); + + WRITE_ONCE(bbnsm->suspended, true); + + return 0; +} + +static int __maybe_unused scmi_imx_bbm_key_resume(struct device *dev) +{ + return 0; +} + +static SIMPLE_DEV_PM_OPS(scmi_imx_bbm_pm_key_ops, scmi_imx_bbm_key_suspend, + scmi_imx_bbm_key_resume); + +static const struct scmi_device_id scmi_id_table[] = { + { SCMI_PROTOCOL_IMX_BBM, "imx-bbm-key" }, + { }, +}; +MODULE_DEVICE_TABLE(scmi, scmi_id_table); + +static struct scmi_driver scmi_imx_bbm_key_driver = { + .driver = { + .pm = &scmi_imx_bbm_pm_key_ops, + }, + .name = "scmi-imx-bbm-key", + .probe = scmi_imx_bbm_key_probe, + .id_table = scmi_id_table, +}; +module_scmi_driver(scmi_imx_bbm_key_driver); + +MODULE_AUTHOR("Peng Fan <peng.fan@nxp.com>"); +MODULE_DESCRIPTION("IMX SM BBM Key driver"); +MODULE_LICENSE("GPL");