| Message ID | 20240710221630.29561-6-james.quinlan@broadcom.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | PCI: brcnstb: Enable STB 7712 SOC | expand |
On 7/11/24 01:16, Jim Quinlan wrote: > The 7712 SOC adds a software init reset device for the PCIe HW. > If found in the DT node, use it. > > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> > --- > drivers/pci/controller/pcie-brcmstb.c | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c > index 92816d8d215a..4dc2ff7f3167 100644 > --- a/drivers/pci/controller/pcie-brcmstb.c > +++ b/drivers/pci/controller/pcie-brcmstb.c > @@ -266,6 +266,7 @@ struct brcm_pcie { > struct reset_control *rescal; > struct reset_control *perst_reset; > struct reset_control *bridge; > + struct reset_control *swinit; > int num_memc; > u64 memc_size[PCIE_BRCM_MAX_MEMC]; > u32 hw_rev; > @@ -1633,12 +1634,27 @@ static int brcm_pcie_probe(struct platform_device *pdev) > if (IS_ERR(pcie->bridge)) > return PTR_ERR(pcie->bridge); > > + pcie->swinit = devm_reset_control_get_optional_exclusive(&pdev->dev, "swinit"); > + if (IS_ERR(pcie->swinit)) > + return PTR_ERR(pcie->swinit); > + > ret = clk_prepare_enable(pcie->clk); > if (ret) { > dev_err(&pdev->dev, "could not enable clock\n"); > return ret; > } > > + ret = reset_control_assert(pcie->swinit); > + if (ret) { > + dev_err_probe(&pdev->dev, ret, "could not assert reset 'swinit'\n"); > + goto clk_out; > + } If there is a new version, please add blank line here. Otherwise: Reviewed-by: Stanimir Varbanov <svarbanov@suse.de> ~Stan > + ret = reset_control_deassert(pcie->swinit); > + if (ret) { > + dev_err(&pdev->dev, "could not de-assert reset 'swinit' after asserting\n"); > + goto clk_out; > + } > + > ret = reset_control_reset(pcie->rescal); > if (ret) { > dev_err(&pdev->dev, "failed to deassert 'rescal'\n");
On 7/10/24 15:16, Jim Quinlan wrote: > The 7712 SOC adds a software init reset device for the PCIe HW. > If found in the DT node, use it. > > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index 92816d8d215a..4dc2ff7f3167 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -266,6 +266,7 @@ struct brcm_pcie { struct reset_control *rescal; struct reset_control *perst_reset; struct reset_control *bridge; + struct reset_control *swinit; int num_memc; u64 memc_size[PCIE_BRCM_MAX_MEMC]; u32 hw_rev; @@ -1633,12 +1634,27 @@ static int brcm_pcie_probe(struct platform_device *pdev) if (IS_ERR(pcie->bridge)) return PTR_ERR(pcie->bridge); + pcie->swinit = devm_reset_control_get_optional_exclusive(&pdev->dev, "swinit"); + if (IS_ERR(pcie->swinit)) + return PTR_ERR(pcie->swinit); + ret = clk_prepare_enable(pcie->clk); if (ret) { dev_err(&pdev->dev, "could not enable clock\n"); return ret; } + ret = reset_control_assert(pcie->swinit); + if (ret) { + dev_err_probe(&pdev->dev, ret, "could not assert reset 'swinit'\n"); + goto clk_out; + } + ret = reset_control_deassert(pcie->swinit); + if (ret) { + dev_err(&pdev->dev, "could not de-assert reset 'swinit' after asserting\n"); + goto clk_out; + } + ret = reset_control_reset(pcie->rescal); if (ret) { dev_err(&pdev->dev, "failed to deassert 'rescal'\n");
The 7712 SOC adds a software init reset device for the PCIe HW. If found in the DT node, use it. Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> --- drivers/pci/controller/pcie-brcmstb.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)